nbworld

Ok Pete. Thanks. Nuno Batalha

Hi Pete, Yes, if i'm capable. But i cannot understand LUA. Can you help me ? Nuno Batalha

Hi Pete, Congratulations about your work :razz: . I have a small problem... i have saitek rudder's and a RevSim Throttle Motorized PnP, and i need to know if is implanted or you can find a way to do this : When press the two rudder pedal to max (or aprox), they trigger a way of send a offset to TQ to act in release the parking brake (i have the RevSim offset). Next week i will received my RevSim Rudders Interlinked, but my friends would enjoy this. www.b737sim.pt Best regards, Nuno Batalha

Hi Pete, To close this section i have received this email that explain all... ICS does not use FSUIPC offsets but communicate directly with compatible software (this eliminates the need of an extra layer like FSUIPC and thus errors). As such, the ICS autobrake section can not be used with TSR autobrake which DOES need FSUIPC offsets. Thanks again. Nuno

Pete, The 2F80 With Hex selected ? Best regards, Nuno

Hi Pete... again I look inside the cpflight directory and i see an DigitalIN.cfg. I grab this... "Autobrake rto","&H2f80",1,0,0,1 "Autobrake off","&H2f80",1,0,1,1 "Autobrake 1","&H2f80",1,0,2,1 "Autobrake 2","&H2f80",1,0,3,1 "Autobrake 3","&H2f80",1,0,4,1 "Autobrake max","&H2f80",1,0,5,1 Thanks, Nuno

Hi Pete, If i go log the axis controls i found this... Switch Autobrake 1 2690081 System time = 17/04/2012 11:14:20, Simulator time = 11:13:56 (10:13Z) 2703762 *** AXIS: Cntrl= 66387 (0x00010353), Param= -14254 (0xffffc852) AXIS_LEFT_BRAKE_SET 2703762 *** AXIS: Cntrl= 66388 (0x00010354), Param= -14254 (0xffffc852) AXIS_RIGHT_BRAKE_SET 2703762 *** TOE BRAKE AXIS, Left set = 0 (IN=-14254, OUT=-16383) 2703762 *** TOE BRAKE AXIS, Right set = 0 (IN=-14254, OUT=-16383) 2703762 *** Both toe brakes off ... Release Armed 2703887 *** AXIS: Cntrl= 66387 (0x00010353), Param= -11960 (0xffffd148) AXIS_LEFT_BRAKE_SET 2703887 *** AXIS: Cntrl= 66388 (0x00010354), Param= -11960 (0xffffd148) AXIS_RIGHT_BRAKE_SET 2704012 *** AXIS: Cntrl= 66387 (0x00010353), Param= -9666 (0xffffda3e) AXIS_LEFT_BRAKE_SET 2704012 *** AXIS: Cntrl= 66388 (0x00010354), Param= -9666 (0xffffda3e) AXIS_RIGHT_BRAKE_SET 2704137 *** AXIS: Cntrl= 66387 (0x00010353), Param= -7373 (0xffffe333) AXIS_LEFT_BRAKE_SET 2704137 *** AXIS: Cntrl= 66388 (0x00010354), Param= -7373 (0xffffe333) AXIS_RIGHT_BRAKE_SET 2704277 *** AXIS: Cntrl= 66387 (0x00010353), Param= -5079 (0xffffec29) AXIS_LEFT_BRAKE_SET 2704277 *** AXIS: Cntrl= 66388 (0x00010354), Param= -5079 (0xffffec29) AXIS_RIGHT_BRAKE_SET 2704386 *** AXIS: Cntrl= 66387 (0x00010353), Param= -2786 (0xfffff51e) AXIS_LEFT_BRAKE_SET 2704386 *** AXIS: Cntrl= 66388 (0x00010354), Param= -2786 (0xfffff51e) AXIS_RIGHT_BRAKE_SET 2704511 *** AXIS: Cntrl= 66387 (0x00010353), Param= -492 (0xfffffe14) AXIS_LEFT_BRAKE_SET 2704511 *** AXIS: Cntrl= 66388 (0x00010354), Param= -492 (0xfffffe14) AXIS_RIGHT_BRAKE_SET 2704652 *** AXIS: Cntrl= 66387 (0x00010353), Param= 1802 (0x0000070a) AXIS_LEFT_BRAKE_SET 2704652 *** AXIS: Cntrl= 66388 (0x00010354), Param= 1802 (0x0000070a) AXIS_RIGHT_BRAKE_SET 2704776 *** AXIS: Cntrl= 66387 (0x00010353), Param= 4095 (0x00000fff) AXIS_LEFT_BRAKE_SET 2704776 *** AXIS: Cntrl= 66388 (0x00010354), Param= 4095 (0x00000fff) AXIS_RIGHT_BRAKE_SET 2704886 *** AXIS: Cntrl= 66387 (0x00010353), Param= 6389 (0x000018f5) AXIS_LEFT_BRAKE_SET 2704886 *** AXIS: Cntrl= 66388 (0x00010354), Param= 6389 (0x000018f5) AXIS_RIGHT_BRAKE_SET 2704964 *** AXIS: Cntrl= 66387 (0x00010353), Param= 8682 (0x000021ea) AXIS_LEFT_BRAKE_SET 2704964 *** AXIS: Cntrl= 66388 (0x00010354), Param= 8682 (0x000021ea) AXIS_RIGHT_BRAKE_SET 2705073 *** AXIS: Cntrl= 66387 (0x00010353), Param= 10976 (0x00002ae0) AXIS_LEFT_BRAKE_SET 2705073 *** AXIS: Cntrl= 66388 (0x00010354), Param= 10976 (0x00002ae0) AXIS_RIGHT_BRAKE_SET 2705198 *** AXIS: Cntrl= 66387 (0x00010353), Param= 13270 (0x000033d6) AXIS_LEFT_BRAKE_SET 2705198 *** AXIS: Cntrl= 66388 (0x00010354), Param= 13270 (0x000033d6) AXIS_RIGHT_BRAKE_SET 2705322 *** AXIS: Cntrl= 66387 (0x00010353), Param= 15891 (0x00003e13) AXIS_LEFT_BRAKE_SET 2705322 *** AXIS: Cntrl= 66388 (0x00010354), Param= 15891 (0x00003e13) AXIS_RIGHT_BRAKE_SET 2705463 *** AXIS: Cntrl= 66387 (0x00010353), Param= 16383 (0x00003fff) AXIS_LEFT_BRAKE_SET 2705463 *** AXIS: Cntrl= 66388 (0x00010354), Param= 16383 (0x00003fff) AXIS_RIGHT_BRAKE_SET Switch Autobrake to OFF 2921134 *** AXIS: Cntrl= 66387 (0x00010353), Param= 14744 (0x00003998) AXIS_LEFT_BRAKE_SET 2921134 *** AXIS: Cntrl= 66388 (0x00010354), Param= 14744 (0x00003998) AXIS_RIGHT_BRAKE_SET 2921134 *** TOE BRAKE AXIS, Left set = 180 (IN=14744, OUT=13104) 2921134 *** TOE BRAKE AXIS, Right set = 180 (IN=14744, OUT=13104) 2921134 *** Both toe brakes over threshold: FS BRAKES control sent 2921197 *** AXIS: Cntrl= 66387 (0x00010353), Param= 13106 (0x00003332) AXIS_LEFT_BRAKE_SET 2921197 *** AXIS: Cntrl= 66388 (0x00010354), Param= 13106 (0x00003332) AXIS_RIGHT_BRAKE_SET The others switch dont work On fsuipc option i cannot but the switch to work. Best regards, Nuno

Peter, The main problem is that the ICS system of cpflight have a different way internally to communicate, for put the offsets out it's the same of all but for fsuipc grab the switch of ICS you just can't (today). If you can grab the switch's of ICS system then the problem is over... Can you get the bottons/switch's work it ICS ?. If you look at this address http://www.cpflight.com/sito/sdk/sdk.asp , you see that the comms internally of activate the rotary/bottoms have a way of cpflight. When you put the joystics/yock's etc. grab the cooms on fsuipc you will see, but on ICS system i can't. If you please make connect like the other's makers... saitek...etc.

Ok Pete, I know this offsets but tsr Offset 2F80 (normal FS2004 Offset) and for fsx the Offset is 6DB1. The main problem is to adquire the offset for the switch for Cpflight Ics system for then put the offset 6DB1 in fsuipc. If i go put the offset by key no problem... but for my system... i go talk with guys from prosim & cpflight. Thanks.

Pete, I explain in detail. I have a Complete Mip off engravity based on cpflight ICS system. On prosim all switch's and bottons work 100%. But when to work with TRS autobrake the system don't work. I need to cancel inside the autobrake system when put manually a fsuipc value for this to work... the problem is that i don't have the fsuipc value to work with csflight hardware. On site the cpflight refer on sdk the numbers that i have but don't the fsuipc values. For Autobrake set i only have this: MIPCOM5_0 - RTO MIPCOM5_1 - OFF MIPCOM5_2 - 1 MIPCOM5_3 - 2 MIPCOM5_4 - 3 MIPCOM5_5 - MAX Thanks

Hi Pete, Ok is true, i'm trying to get the offset to put in prosim737 on the fsuipc 8 bit U but i only get the "MIPCOM5_0" FOR Autobrake RTO, on Cpflight dont have the correct offsets or the fsuipc values. Have you find a way to do so ? Thanks

Hi, In need some help... i'm trying to get the offset for programming Cpflight Ics system. I just get the hex data on the advanced serial port monitor but i cannot finf the solution for cenvert/get the offset data. For example... for autobrake RTO -> 4D 49 50 43 4F 4D 35 5F 30 00 Please help.