gfd
-
Posts
171 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by gfd
-
-
Thanks for the background. I'll post to them over at their place and see what they have to say. I couldn't figure out how I might have invoked some elevated debug activity in FSUIPC.
I use ASN and therefore do not make extensive use of your miscellaneous options. The exceptions being VAS tracking via the log page and the facility to start the session with accurate time.
Controller assignments and WideFS buttons are something else altogether. I mention this as you expressed concern about P3D v3 playing nice with FSUIPC. I don't know what significance this will have, but:
-as stated elsewhere, P3D v3 appears to respect the stripping of controller assignments from its options. I have had controllers drop out the reinstalled them, without automatic assignment. The controllers checkbox is filled. The only controls I use in P3D are those for the avatar.
-was able to make use of FSUIPC calibration. In one case, I was able to assign 75% of the travel of an axis to spoilers using FSUIPC calibration, and the final 25% to arming/disarming ground spoilers direct through P3D; using the strpped facility on the right side of the tab.
-other axes that do not calibrate through FSUIPC, appear to work correctly including those assigned to the Airbus thrust lua file you put out awhile ago.
Probably should be a separate post. However, I hate to pass up on an opportunity to be verbose.
-
Thanks for that. Just to clarify, let's say I have two identical controllers. 1=A and 2=B. Each has a distinct GUID:
1=controller
1.GUID={123}
2=controller
2.GUID={234}
A=controller
A.GUID={123}
B=controller
B.GUID={234}
Say the controllers drop out and get reversed. I correct that by changing the letters on both pairs of lines?
Thanks again.
-
I am using the latest version of FSUIPC along with LINDA in P3D v3 inside of Windows 10 64 bit. I have started getting an error in the FSUIPC log as follows:
*** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory
There are several instances of this error in the log. This file does not exist on my computer. Please see the log below. I should point out that I looked at this thread:
http://forum.simflight.com/topic/80259-i-need-help-for-lua/
Have I inadvertently put FSUIPC into debug mode?
Is this something I need to be concerned about? If not, please disregard with thanks.
********* FSUIPC4, Version 4.948 by Pete Dowson *********Reading options from "S:\P3D\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 8.0Module base=57550000User Name="Graham Derreck"User Addr="gderreck@shaw.ca"FSUIPC4 Key is providedWideFS7 Key is provided4656 System time = 08/11/2015 21:15:084656 FLT UNC path = "\\GFD-DESKTOP\Documents\Prepar3D v3 Files\"4656 Trying S:\P3D\Modules\SimConnectP3D2.dll4656 Found it: trying to connect4672 FS UNC path = "\\GFD-DESKTOP\P3D\"4765 Finished: 0 Profile files created4812 ---------------------- Joystick Device Scan -----------------------4812 Product= Saitek Pro Flight Quadrant4812 Manufacturer= Saitek4812 Vendor=06A3, Product=0C2D (Version 2.1)4812 Serial Number= Saitek4812 Product= SideWinder Force Feedback 2 Joystick4812 Manufacturer= Microsoft4812 Vendor=045E, Product=001B (Version 10.0)4812 Serial Number= Microsoft4812 Product= Saitek Pro Flight Combat Rudder Pedals4812 Manufacturer= Saitek4812 Vendor=06A3, Product=0764 (Version 2.1)4812 Serial Number= Saitek4828 Product= Pro Flight Cessna Trim Wheel4828 Manufacturer= Saitek4828 Vendor=06A3, Product=0BD4 (Version 1.7)4828 Serial Number= RD0140754828 Product= Saitek Pro Flight Quadrant4828 Manufacturer= Saitek4828 Vendor=06A3, Product=0C2D (Version 2.1)4828 Serial Number= Saitek4828 Product= Saitek Pro Flight Quadrant4828 Manufacturer= Saitek4828 Vendor=06A3, Product=0C2D (Version 2.1)4828 Serial Number= Saitek4828 -------------------------------------------------------------------4859 Run: "S:\P3D\Modules\linda.exe"4937 LogOptions=00000000 000000014953 -------------------------------------------------------------------4953 ------ Setting the hooks and direct calls into the simulator ------4953 --- CONTROLS timer memory location obtained ok4953 --- SIM1 Frictions access gained4953 --- FS Controls Table located ok4953 --- Installed Mouse Macro hooks ok.4953 --- Wind smoothing fix is installed4953 --- All links okay (except older global weather setting method)4953 -------------------------------------------------------------------4953 SimConnect_Open succeeded: waiting to check version okay4953 Trying to use SimConnect Prepar3D4968 VRI port 1 "com3" opened13062 VRI MCP2B ("MCP2 Boeing") detected on port com329078 Running in "Lockheed Martin� Prepar3D� v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)29078 Initialising SimConnect data requests now29078 FSUIPC Menu entry added29093 \\GFD-DESKTOP\Documents\Prepar3D v3 Files\A2A_172_KFHR.fxml29093 \\GFD-DESKTOP\P3D\SimObjects\Airplanes\A2A_C172\C172.air44218 Weather Mode now = Theme47468 \\GFD-DESKTOP\P3D\SimObjects\Airplanes\Aerosoft Airbus A319 CFM\A319.air47468 \\GFD-DESKTOP\Documents\Prepar3D v3 Files\AC_A319_CYVR.fxml100328 System time = 08/11/2015 21:16:44, Simulator time = 20:15:38 (04:15Z)100343 Aircraft="Airbus A319 Air Canada C-GITP"101328 Starting everything now ...101343 LUA.0: beginning "S:\P3D\Modules\ipcReady.lua"101343 LUA.0: ended "S:\P3D\Modules\ipcReady.lua"101359 LUA.1:101359 LUA.1: ************************** START *************************101359 LUA.1: [sTART]LINDA:: Loading...101359 ASN active function link set101359 Ready for ASN WX radar101375 LUA.1: LINDA:: [sTART] VRInsight MCP Set = mcp2101500 LUA.1: LINDA:: [sTART] New Aircraft Selected - restarting...101500 LUA.1: LINDA:: [sTART] Aircraft: Airbus A319 Air Canada C-GITP101500 LUA.1: LINDA:: [sTART] Air file: \\GFD-DESKTOP\P3D\SimObjects\Airplanes\Aerosoft Airbus A319 CFM\A319.air101562 LUA.1: LINDA:: [sTART] Aircraft module detected: Aerosoft Airbus101593 LUA.0: LINDA:: [iNIT] Starting Initialisation...101609 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-aivlasoft101609 LUA.0: LINDA:: [LIB] AivlaSoft library loaded...101609 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-ATC101609 LUA.0: LINDA:: [LIB] ATC library loaded...101609 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-fallback101625 LUA.0: LINDA:: [LIB] FSX standard library loaded...101625 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-FS2Crew101625 LUA.0: LINDA:: [LIB] FS2Crew library loaded...101625 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-fsx101640 LUA.0: LINDA:: [LIB] FSX Functions loaded...101640 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-IVAO101640 LUA.0: LINDA:: [LIB] IVAO library loaded...101640 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-realityxp101640 LUA.0: LINDA:: [LIB] RealityXP library loaded...101656 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-saitek101656 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-user101656 LUA.0: LINDA:: [LIB] User Library loaded...101656 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-VATSIM101656 LUA.0: LINDA:: [LIB] VATSIM library loaded...101672 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-vrinsight101672 LUA.0: LINDA:: [LIB] VRInsight Function Library loaded...101672 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-weather101672 LUA.0: LINDA:: [LIB] Weather library loaded...101672 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-a2amap101687 LUA.0: LINDA:: [LIB] A2A MAP library loaded...101687 LUA.0: LINDA:: [iNIT] Initializing Common Variables...101734 LUA.0: LINDA:: [iNIT] User GLOBAL config loaded...101734 LUA.0: LINDA:: User's modifications script is loaded...101734 LUA.0: LINDA:: [iNIT] User FUNCTIONS loaded...101750 LUA.0: LINDA:: [iNIT] VRI MCP config loaded...101765 LUA.0: LINDA:: [iNIT] Finalising Initialisation...101765 LUA.0: LINDA:: [COMM] DSP Mode 1101797 LUA.0: LINDA:: [COMM] Checking VRI101797 LUA.0: LINDA:: [COMM] Enabling VRI101812 LUA.0: LINDA:: [COMM] ConnectMCP - Connecting to MCP Panel...101812 LUA.0: LINDA:: [COMM] ConnectMCP completed - 320530620101812 LUA.0: LINDA:: [COMM] InitMCP - Initialising MCP...102281 LUA.0: LINDA:: [COMM] Initializing MCP2 (Boeing)...102500 Advanced Weather Interface Enabled110687 LUA.0: LINDA:: [COMM] RADIOS : Empty command for :: COM1 Select110750 LUA.0: LINDA:: [COMM] InitMCP - completed111890 LUA.0: LINDA:: [COMM] MCP Started...111890 LUA.0: LINDA:: [iNIT] Initialising HID devices...111906 LUA.0: LINDA:: [iNIT] Loading a fallback joysticks config...111922 LUA.0: LINDA:: [iNIT] Loading Aerosoft Airbus joysticks config...111922 LUA.0: LINDA:: [iNIT] Module: Aerosoft Airbus Started...111937 LUA.0: LINDA:: [iNIT] Initiating Autosave true114578 LUA.0: LINDA:: [iNIT] Ready to go, Captain!114593 LUA.0: LINDA:: Offsets watching list cleared!114765 LUA.0: LINDA:: LVars watching list cleared...114953 LUA.0: LINDA:: Offsets watching list cleared!115109 LUA.0: LINDA:: LVars watching list cleared...116125 LUA.0: LINDA:: Offsets watching list cleared!116187 LUA.0: LINDA:: LVars watching list cleared...116343 LUA.0: LINDA:: Offsets watching list cleared!116468 LUA.0: LINDA:: LVars watching list cleared...116593 LUA.0: LINDA:: Offsets watching list cleared!150297 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory150297 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"150297 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1150297 LUA.2: Global: ipcPARAM = -2991150328 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"150328 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory150328 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"150328 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1150328 LUA.2: Global: ipcPARAM = -4421150359 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"150359 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory150359 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"150359 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1150359 LUA.2: Global: ipcPARAM = -6111150390 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"150390 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory150390 LUA.3: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"150390 LUA.3: S:\P3D\Modules\AirbusX_Thr2.lua:1150390 LUA.3: Global: ipcPARAM = -7932150422 LUA.3: ended "S:\P3D\Modules\AirbusX_Thr2.lua"150422 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory150422 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"150422 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1150422 LUA.2: Global: ipcPARAM = -8842150437 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"150437 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory150437 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"150437 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1150453 LUA.2: Global: ipcPARAM = -11052150468 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"150468 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory150468 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"150468 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1150468 LUA.2: Global: ipcPARAM = -12353150500 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"150547 LUA.3: ended "S:\P3D\Modules\AirbusX_Thr2.lua"150547 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory150547 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"150547 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1150547 LUA.2: Global: ipcPARAM = -15473150562 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155015 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155015 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155015 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155015 LUA.2: Global: ipcPARAM = -15213155047 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155047 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155047 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155047 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155047 LUA.2: Global: ipcPARAM = -11312155062 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155078 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155078 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155078 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155078 LUA.2: Global: ipcPARAM = -7282155093 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155093 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155093 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155093 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155109 LUA.2: Global: ipcPARAM = -3641155125 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155156 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155156 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155187 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155187 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155187 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155187 LUA.2: Global: ipcPARAM = 1408155218 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155218 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155218 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155218 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155218 LUA.2: Global: ipcPARAM = 3712155250 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155281 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155312 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155328 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155328 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155328 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155328 LUA.2: Global: ipcPARAM = 11520155359 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155359 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155359 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155359 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155359 LUA.2: Global: ipcPARAM = 14208155390 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155390 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155390 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155390 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155390 LUA.2: Global: ipcPARAM = 15616155422 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155890 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155890 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155890 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155906 LUA.2: Global: ipcPARAM = 15488155937 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155937 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155937 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155937 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155937 LUA.2: Global: ipcPARAM = 14080155953 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155953 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155953 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155953 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155968 LUA.2: Global: ipcPARAM = 12800155984 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"155984 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory155984 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"155984 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1155984 LUA.2: Global: ipcPARAM = 10624156015 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156047 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156047 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156047 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156047 LUA.2: Global: ipcPARAM = 8064156078 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156078 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156078 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156078 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156078 LUA.2: Global: ipcPARAM = 4992156109 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156109 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156109 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156109 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156109 LUA.2: Global: ipcPARAM = 3712156140 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156140 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156140 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156140 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156140 LUA.2: Global: ipcPARAM = 1280156172 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156172 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156172 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156172 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156172 LUA.2: Global: ipcPARAM = -1040156203 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156203 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156203 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156203 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156203 LUA.2: Global: ipcPARAM = -3511156234 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156234 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156234 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156234 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156234 LUA.2: Global: ipcPARAM = -6111156265 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156265 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156265 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156265 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156265 LUA.2: Global: ipcPARAM = -7282156297 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156328 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156328 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156328 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156328 LUA.2: Global: ipcPARAM = -10532156359 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156359 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156359 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156359 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156359 LUA.2: Global: ipcPARAM = -11833156390 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156390 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156390 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156390 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156390 LUA.2: Global: ipcPARAM = -13003156406 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156406 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156406 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156406 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156406 LUA.2: Global: ipcPARAM = -14173156437 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156468 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156468 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156468 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156468 LUA.2: Global: ipcPARAM = -15083156500 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"156500 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory156500 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"156500 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1156500 LUA.2: Global: ipcPARAM = -16384156531 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua"240609 Sim stopped: average frame rate for last 141 secs = 32.3 fps252656 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory252656 LUA.3: beginning "S:\P3D\Modules\AirbusX_Thr2.lua"252656 LUA.3: S:\P3D\Modules\AirbusX_Thr2.lua:1252656 LUA.3: Global: ipcPARAM = -16384252656 LUA.3: ended "S:\P3D\Modules\AirbusX_Thr2.lua"321437 Sim stopped: average frame rate for last 23 secs = 34.1 fps556015 Sim stopped: average frame rate for last 120 secs = 30.5 fps612937 Sim stopped: average frame rate for last 56 secs = 33.2 fps867343 Sim stopped: average frame rate for last 249 secs = 34.1 fps1146968 Sim stopped: average frame rate for last 64 secs = 27.1 fps1206109 Sim stopped: average frame rate for last 20 secs = 25.5 fps -
I am bumping my own topic as I need some help. As indicated above, the Saitek throttles drop out after restarting Windows. The only way to get them back is to reinstall the driver. This reorders the controllers in the OS. I had thought that FSUIPC reassigned the controller order to compensate. I may have been mistaken. I reinstalled the driver after a reboot and two of the throttle quadrants were reversed. No amount of tinkering with FSUIPC4.ini corrected the situation. I looked in the manual, but didn't find a solution. I'm sure it's there, but I'm probably too thick to get it.
I had AutoAssignLetters=Yes setup in the ini file. In my case, the 'G' controller got reversed with the 'F' controller.
Perhaps someone with more wherewithal than me can walk me through how to get the correct controllers reattached to the proper assignments. Assume you are addressing a 6 year old. In this case, that's where I'm at :) I would like to avoid having to go through reassigning all of my profiles if possible. However, if that is the only alternative, I would like to know this in order to avoid spinning my wheels any further.
Any assistance would be most appreciated.
-
I can confirm that P3D seems to respect the deleted controller assignments when there is a disconnect/reconnect.
-
If you use the FSUIPC4.ini entry below for the 'Letters' option there is no danger of the ID's changing. That is
the purpose of this option. Instead of the numbers, which are supplied to FSUIPC4 by Windows, FSUIPC4 will
use letters linked by the controller GUID, which will not change.
[JoyNames]
AutoAssignLetters=Yes
Paul
Yeah, that's how I do it. However, until the latest version, I found that when I reinstalled my controllers, due to the useless Saitek drivers; I had to mess around getting FSUIPC controllers back in order. This is the first time I reinstalled drivers and didn't have to do some engineering in order to keep the controllers in line. Perhaps I was doing something wrong in the past, but the compliment still stands.
-
Just wanted to say thanks for making good on the plan to have FSUIPC track controller changes. As some of you may know, Saitek controllers tend to misbehave on Windows 10; particularly if the are more than 1 of the same controller. In my case, I have 3 throttle quadrants. On startup, I occasionally lose 1 or more controllers. That requires running the driver installer to get the controllers back.
I decided to uninstall all of the throttles and manually point them to the inf file for the driver. I don't know if that will work. However, upon reinstalling the drivers, the throttle IDs in Windows changed. Changing the order using JoyIDs didn't work. There is a point to this post coming :)
I was afraid I would have to manually change my assignments in FSUIPC...arghhh. Guess what...when I opened Prepar3D, the assignments were still correct. That is so cool!!
Thanks for that.
-
True enough. Am having some issues testing other controllers. Saitek is a mess in Windows 10. Will reply here when I get it sorted out.
-
Will do. Should point out that when I initially installed P3D v3, assignments were populated for the Sidewinder.
-
It was a Sidewinder II FFB. Do you want me to unplug something else and check? I have Saitek throttles, Saitek combat rudder pedals, Xbox 360, Saitek trim wheel.
-
Thanks for the reply. I can tell you that:
-disconnected joystick from USB port
-ran P3D v3
-closed P3D
-plugged joystick in
-ran P3D
-nothing was assigned in P3D for the joystick
Don't know if this was any value, given other's mileage may vary.
As far as getting into trouble, I've done it every way imaginable. I now use file backup for minor changes and a disk image for major changes. That doesn't make me smart. It just mitigates the effects when I do dumb stuff.
-
Greetings,
I read your post suggesting that controllers be disabled in P3D version 3. With one exception, that doesn't matter to me. The exception is, if I disable the controllers in the check box, FS Force can no longer control the trim in the aircraft. That is one of its most compelling features. I have disabled all buttons and axes in P3D controls.
The setup includes a Saitek trim wheel. After starting windows, the controller needs to be spun a number of times. The controller then drops out and reconnects. I can confirm that the trim wheel is not assigned in P3D controls after this event. Furthermore, I have tested this with, and without P3D running. Does that satisfy your request to ensure that FSUIPC and P3D controls are not at odds? I am using your latest version 4.947.
Thanks
-
Thanks Paul. You've given me a start at getting this solved.
Graham
EDIT: Just as a follow up, I compared the ini and profile files. You were bang on. I had gotten rid of a number of lua files and what was once CL19 is now CL5. This is in addition to the fact that perhaps FSUIPC gave the lua files different reference numbers in the new installation.
It is all so very elegant and simple. Too bad I didn't figure it out for myself. Thank you again Paul, for turning me in the right direction.
-
Greetings,
I know Peter is away until the 4th. However, I have an issue that I would appreciate some help with.
I reinstalled my system, upgrading to Windows 10. I did a clean install. I did save all of my flight data, including the Modules folder. I have just upgraded to the latest version of FSUIPC. I did a comparison on WinMerge and was able to merge the old and new FSUIPC ini file. There were few differences; mainly had to move the profile references into the new ini file. FSUIPC loads without issue. The controllers are recognized by FSUIPC correctly. The profiles (in folders) are recognized.
I have setup WideFS button screens on a networked machine. Just an excellent feature! Saves a bundle on hardware costs. I digress.
I have LUA files setup with custom scripts for button assignments. I loaded a flight with an aircraft that had a profile (in this case the A2A 172). The axes were setup as expected in the FSUIPC GUI. However when I pressed buttons on the controllers, the lua file did not show up. Only the parameter numbers. It seems FSUIPC forgot the lua file.
I looked in the profile and noticed entries like CL19, CL20, etc. Is that the code for the lua file(s)? Sample button entry in the profile:
21=R68,12,CL19:R,51
Is CL19 the reference to the lua file? If so, can re-train FSUIPC to recognize the files? If not, I suppose I'll have to reprogram FSUIPC for each of the profiles; at least the file reference. Not a big deal. Just curious.
Many thanks in advance for your assistance,
Graham
-
I uninstalled all scenery and reverted back to virgin P3D scenery state with the latest hotfix. Virgin includes original scenery.cfg, terrain.cfg, original scenery, original textures, original effects, etc. Then installed Orbx Global, Vector and PNW. Also installed Don Grovestine's CYYJ. I reinstalled 4.9393e and ran Orbx Bob at CYYJ. There were zero error messages when opening P3D. Active Sky Next SP2 build 5540 was running on the networked machine. I'm not sure what this proves, other than the errors went away after 3rd party scenery removal. I am including the log FYI. Unless there is something else you would like me to do, I won't post again unless the errors return as I install additional scenery items. Thanks for looking in on this. Here's the log:
********* FSUIPC4, Version 4.939e by Pete Dowson *********Reading options from "S:\P3D\Modules\FSUIPC4.ini"Running inside Prepar3D v2 on Windows 7Module base=59000000User Name="Graham Derreck"User Addr="gderreck@shaw.ca"FSUIPC4 Key is providedWideFS7 Key is provided452 System time = 06/03/2015 22:42:27452 FLT UNC path = "\\GFD-DESKTOP\Prepar3D v2 Files Documents\"452 Trying S:\P3D\Modules\SimConnectP3D2.dll468 Found it: trying to connect468 FS UNC path = "\\GFD-DESKTOP\P3D\"967 Finished: 0 Profile files created1201 Run: "S:\P3D\Modules\linda.exe"1419 Run: "S:\Programs\Naturalpoint\TrackIR5.exe"1731 Run: "S:\Programs\AirTrafficManagerFSX-P3D Radar\AirTrafficManagerFSX-P3D Radar\AirTrafficManager.exe"1918 LogOptions=00000000 000000011918 --- CONTROLS timer memory location obtained ok1918 --- SIM1 Frictions access gained1918 ASN active function link set1918 --- FS Controls Table located ok1918 --- Installed Mouse Macro hooks ok.1918 Wind smoothing may be by ASN, not FSUIPC, if it is running1918 Will switch smoothing action when ASN starts/stops1918 SimConnect_Open succeeded: waiting to check version okay1918 Trying to use SimConnect Prepar3D1950 VRI port 1 "COM3" opened27113 VRI MCP2B ("MCP2 Boeing") detected on port COM341387 Running in "Lockheed Martin® Prepar3D® v2", Version: 2.5.12944.0 (SimConnect: 2.5.0.0)41387 Initialising SimConnect data requests now41387 FSUIPC Menu entry added41418 \\GFD-DESKTOP\Prepar3D v2 Files Documents\BOB_CYYJ.fxml41418 \\GFD-DESKTOP\P3D\SimObjects\Airplanes\BOB\BOB.air96065 System time = 06/03/2015 22:44:03, Simulator time = 22:43:08 (06:43Z)96096 Aircraft="BOB"98062 Starting everything now ...98077 LUA.0: beginning "S:\P3D\Modules\ipcReady.lua"98077 LUA.0: ended "S:\P3D\Modules\ipcReady.lua"98093 LUA.1:**************************** START ******************************98093 LUA.1: [iNIT]LINDA:: Loading...98093 LUA.1: VRInsight MCP Type = 298109 LUA.1: VRInsight MCP Set = mcp298171 LUA.1: LINDA:: Aircraft: BOB98187 LUA.1: LINDA:: Air file: \\GFD-DESKTOP\P3D\SimObjects\Airplanes\BOB\BOB.air98187 LUA.1: LINDA:: Aircraft module detected: FSX Default98202 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-aivlasoft98202 LUA.0: LINDA:: [LIB] AivlaSoft library loaded...98202 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-fallback98218 LUA.0: LINDA:: [LIB] FSX standard library loaded...98218 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-FS2Crew98218 LUA.0: LINDA:: [LIB] FS2Crew library loaded...98218 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-fsx98233 LUA.0: LINDA:: [LIB] FSX Functions loaded...98233 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-IVAO98233 LUA.0: LINDA:: [LIB] IVAO library loaded...98233 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-realityxp98233 LUA.0: LINDA:: [LIB] RealityXP library loaded...98233 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-user98233 LUA.0: LINDA:: [LIB] User Library loaded...98233 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-VATSIM98249 LUA.0: LINDA:: [LIB] VATSIM library loaded...98249 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-vrinsight98249 LUA.0: LINDA:: [LIB] VRInsight Function Library loaded...98249 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-weather98249 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-a2amap98249 LUA.0: LINDA:: [LIB] A2A MAP library loaded...98249 LUA.0: LINDA:: LINDA: Initialling Common Variables98249 LUA.0: LINDA:: Setting Common Init Vars98280 LUA.0: LINDA:: User GLOBAL config loaded...98280 LUA.0: LINDA:: User's modifications script is loaded...98280 LUA.0: LINDA:: User FUNCTIONS loaded...98779 LUA.0: LINDA:: Initializing MCP2 (Boeing)98935 Weather Mode now = Theme105238 LUA.0: LINDA:: RADIOS : Empty command for :: COM1 Select106595 LUA.0: LINDA:: Loading a fallback joysticks config...106611 LUA.0: LINDA:: Loading FSX Default joysticks config...106611 LUA.0: LINDA:: Module: FSX Default Started...106611 LUA.0: LINDA:: Ready to go, Captain!106611 LUA.0: LINDA:: [awg] Initiating Autosave true106642 LUA.0: LINDA:: Airborne ...106642 LUA.0: LINDA:: Offsets watching list cleared!134457 Advanced Weather Interface Enabled420344 Sim stopped: average frame rate for last 287 secs = 44.1 fps452465 System time = 06/03/2015 22:49:59, Simulator time = 22:47:55 (06:47Z)452465 *** FSUIPC log file being closedMinimum frame rate was 25.0 fps, Maximum was 72.5 fpsMinimum available memory recorded was 1691MbAverage frame rate for running time of 300 secs = 45.0 fpsMemory managed: 154 Allocs, 152 Freed********* FSUIPC Log file closed *********** -
Thanks for this. Incidentally, I run ASN on a networked computer. as_serv is on the P3D machine. I ran P3D 3 more times. Once with as_serv enabled in dll.xml, once with it disabled and finally, with as_serv disabled and NewInterceptTextMenu=Yes . On second attempt, I have 'Wind smoothing fix is fully installed'. On third attempt, I have both of the missing log messages. Rather than clutter up the post, I posted a folder with the 3 logs on OneDrive. Here's the link FYI:
Thanks
-
I reinstalled the hotfix and got the same error message. On a hunch, I downgraded to 4.939d and the error entries went away. Here's the log:
********* FSUIPC4, Version 4.939d by Pete Dowson *********Reading options from "S:\P3D\Modules\FSUIPC4.ini"Running inside Prepar3D v2 on Windows 7Module base=578F0000User Name="Graham Derreck"User Addr="gderreck@shaw.ca"FSUIPC4 Key is providedWideFS7 Key is provided265 System time = 04/03/2015 10:35:39265 FLT UNC path = "\\GFD-DESKTOP\Prepar3D v2 Files Documents\"265 Trying S:\P3D\Modules\SimConnectP3D2.dll265 Found it: trying to connect265 FS UNC path = "\\GFD-DESKTOP\P3D\"405 Finished: 0 Profile files created437 Run: "S:\P3D\Modules\linda.exe"577 Run: "S:\Programs\Naturalpoint\TrackIR5.exe"717 Run: "D:\Windows Applications\1 Flight\1 Flight Software_Hardware\AirTrafficManager\AirTrafficManagerFSX-P3D Radar\AirTrafficManager.exe"858 LogOptions=00000000 00000001858 --- CONTROLS timer memory location obtained ok858 --- SIM1 Frictions access gained858 ASN active function link set873 --- FS Controls Table located ok873 --- Installed Mouse Macro hooks ok.873 Wind smoothing may be by ASN, not FSUIPC, if it is running873 Will switch smoothing action when ASN starts/stops873 SimConnect_Open succeeded: waiting to check version okay873 Trying to use SimConnect Prepar3D905 VRI port 1 "COM3" opened25506 VRI MCP2B ("MCP2 Boeing") detected on port COM332292 Running in "Lockheed Martin® Prepar3D® v2", Version: 2.5.12944.0 (SimConnect: 2.5.0.0)32292 Initialising SimConnect data requests now32292 FSUIPC Menu entry added32308 \\GFD-DESKTOP\Prepar3D v2 Files Documents\AC 772 CYYZ.fxml32308 \\GFD-DESKTOP\P3D\SimObjects\Airplanes\PMDG 777-200LR\B777-200LR.air62899 System time = 04/03/2015 10:36:41, Simulator time = 10:36:11 (15:36Z)62915 Aircraft="PMDG 777-233LR Air Canada"64912 Starting everything now ...64912 LUA.0: beginning "S:\P3D\Modules\ipcReady.lua"64912 LUA.0: ended "S:\P3D\Modules\ipcReady.lua"64927 LUA.1:**************************** START ******************************64927 LUA.1: [iNIT]LINDA:: Loading...64927 LUA.1: VRInsight MCP Type = 264943 LUA.1: VRInsight MCP Set = mcp265005 LUA.1: LINDA:: Aircraft: PMDG 777-233LR Air Canada65021 LUA.1: LINDA:: Air file: \\GFD-DESKTOP\P3D\SimObjects\Airplanes\PMDG 777-200LR\B777-200LR.air65021 LUA.1: LINDA:: Aircraft module detected: PMDG 77765052 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-aivlasoft65068 LUA.0: LINDA:: [LIB] AivlaSoft library loaded...65068 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-fallback65068 LUA.0: LINDA:: [LIB] FSX standard library loaded...65068 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-FS2Crew65068 LUA.0: LINDA:: [LIB] FS2Crew library loaded...65068 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-fsx65083 LUA.0: LINDA:: [LIB] FSX Functions loaded...65083 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-IVAO65083 LUA.0: LINDA:: [LIB] IVAO library loaded...65083 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-realityxp65083 LUA.0: LINDA:: [LIB] RealityXP library loaded...65083 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-user65083 LUA.0: LINDA:: [LIB] User Library loaded...65083 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-VATSIM65099 LUA.0: LINDA:: [LIB] VATSIM library loaded...65099 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-vrinsight65099 LUA.0: LINDA:: [LIB] VRInsight Function Library loaded...65099 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-weather65099 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-a2amap65099 LUA.0: LINDA:: [LIB] A2A MAP library loaded...65099 LUA.0: LINDA:: LINDA: Initialling Common Variables65115 LUA.0: LINDA:: Setting Common Init Vars65130 LUA.0: LINDA:: User GLOBAL config loaded...65146 LUA.0: LINDA:: User's modifications script is loaded...65146 LUA.0: LINDA:: User FUNCTIONS loaded...65364 Weather Mode now = Theme65676 LUA.0: LINDA:: Initializing MCP2 (Boeing)72197 LUA.0: LINDA:: RADIOS : Empty command for :: COM1 Select73523 LUA.0: LINDA:: Loading a fallback joysticks config...73539 LUA.0: LINDA:: Loading PMDG 777 joysticks config...73539 LUA.0: LINDA:: Module: PMDG 777 Started...73539 LUA.0: LINDA:: Ready to go, Captain!73539 LUA.0: LINDA:: [awg] Initiating Autosave true73570 LUA.0: LINDA:: Airborne ...73601 LUA.0: LINDA:: Offsets watching list cleared!88125 Sim stopped: average frame rate for last 25 secs = 26.6 fps108186 Advanced Weather Interface Enabled243439 Sim stopped: average frame rate for last 138 secs = 18.0 fps267292 System time = 04/03/2015 10:40:06, Simulator time = 10:38:28 (15:38Z)267292 *** FSUIPC log file being closedMinimum frame rate was 13.3 fps, Maximum was 29.0 fpsMinimum available memory recorded was 859MbAverage frame rate for running time of 163 secs = 19.3 fpsMemory managed: 89 Allocs, 87 Freed********* FSUIPC Log file closed ***********Perhaps there is something on my system that 4.939e doesn't like. If I can give you any info, please let me know. I can run a Belarc or a sysinfo if you like. If not, I am happy to live with it the way it is.I realize you get a bit tired of all the accolades, but I really do appreciate the superior support provided for a superior product. You must understand that when we compliment you, it is not because we feel obligated to do so, but because you probably deserve it.Thanks. -
I'll check all of this out and reinstall the hotfix. Re ASN, I didn't get any error messages and program did not close. That's FYI.
-
Greetings,
I installed the latest P3D hotfix. Also installed latest FSUIPC, ASN and couatl from FSDT. When I open P3D, I get 2 error messages from FSUIPC. This is repeatable. First case was FlyTampa CYYZ. Second was FSDT CYVR. The aircraft in both instances was PMDG 777-200LR. It doesn't seem to affect the simulation, other than VAS usage appears to be higher from the outset (that could be my imagination). Here's a copy of the log. The errors are at lines 22 and 23:
********* FSUIPC4, Version 4.939e by Pete Dowson *********Reading options from "S:\P3D\Modules\FSUIPC4.ini"Running inside Prepar3D v2 on Windows 7Module base=576C0000User Name="Graham Derreck"User Addr="gderreck@shaw.ca"FSUIPC4 Key is providedWideFS7 Key is provided1046 System time = 04/03/2015 00:10:291061 FLT UNC path = "\\GFD-DESKTOP\Prepar3D v2 Files Documents\"1061 Trying S:\P3D\Modules\SimConnectP3D2.dll1061 Found it: trying to connect1061 FS UNC path = "\\GFD-DESKTOP\P3D\"1217 Finished: 0 Profile files created1280 Run: "S:\P3D\Modules\linda.exe"1482 Run: "S:\Programs\Naturalpoint\TrackIR5.exe"1748 Run: "D:\Windows Applications\1 Flight\1 Flight Software_Hardware\AirTrafficManager\AirTrafficManagerFSX-P3D Radar\AirTrafficManager.exe"1919 LogOptions=00000000 000000011919 --- CONTROLS timer memory location obtained ok1919 --- SIM1 Frictions access gained1919 ASN active function link set1919 Hook Error: can't find .42 in SIM1.dll1919 Hook Error: can't find .42 in VISUALFX.dll1919 --- FS Controls Table located ok1919 --- Installed Mouse Macro hooks ok.1919 Wind smoothing is by ASN, not FSUIPC1919 Will switch smoothing action when ASN starts/stops1919 SimConnect_Open succeeded: waiting to check version okay1919 Trying to use SimConnect Prepar3D1935 Running in "Lockheed Martin® Prepar3D® v2", Version: 2.5.12944.0 (SimConnect: 2.5.0.0)1935 Initialising SimConnect data requests now1935 FSUIPC Menu entry added1950 VRI port 1 "COM3" opened1950 \\GFD-DESKTOP\Prepar3D v2 Files Documents\B772_CYVR.fxml1950 \\GFD-DESKTOP\P3D\SimObjects\Airplanes\PMDG 777-200LR\B777-200LR.air3604 VRI MCP2B ("MCP2 Boeing") detected on port COM339547 System time = 04/03/2015 00:11:08, Simulator time = 00:10:28 (08:10Z)39562 Aircraft="PMDG 777-233LR Air Canada"47347 Starting everything now ...47362 LUA.0: beginning "S:\P3D\Modules\ipcReady.lua"47362 LUA.0: ended "S:\P3D\Modules\ipcReady.lua"47378 LUA.1:**************************** START ******************************47378 LUA.1: [iNIT]LINDA:: Loading...47378 LUA.1: VRInsight MCP Type = 247394 LUA.1: VRInsight MCP Set = mcp247456 LUA.1: LINDA:: Aircraft: PMDG 777-233LR Air Canada47472 LUA.1: LINDA:: Air file: \\GFD-DESKTOP\P3D\SimObjects\Airplanes\PMDG 777-200LR\B777-200LR.air47472 LUA.1: LINDA:: Aircraft module detected: PMDG 77747487 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-aivlasoft47487 LUA.0: LINDA:: [LIB] AivlaSoft library loaded...47487 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-fallback47503 LUA.0: LINDA:: [LIB] FSX standard library loaded...47503 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-FS2Crew47503 LUA.0: LINDA:: [LIB] FS2Crew library loaded...47503 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-fsx47503 LUA.0: LINDA:: [LIB] FSX Functions loaded...47503 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-IVAO47518 LUA.0: LINDA:: [LIB] IVAO library loaded...47518 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-realityxp47518 LUA.0: LINDA:: [LIB] RealityXP library loaded...47518 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-user47518 LUA.0: LINDA:: [LIB] User Library loaded...47518 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-VATSIM47518 LUA.0: LINDA:: [LIB] VATSIM library loaded...47534 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-vrinsight47534 LUA.0: LINDA:: [LIB] VRInsight Function Library loaded...47534 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-weather47534 LUA.0: LINDA:: INIT loading optional library: linda/libs/lib-a2amap47534 LUA.0: LINDA:: [LIB] A2A MAP library loaded...47534 LUA.0: LINDA:: LINDA: Initialling Common Variables47534 LUA.0: LINDA:: Setting Common Init Vars47565 LUA.0: LINDA:: User GLOBAL config loaded...47565 LUA.0: LINDA:: User's modifications script is loaded...47565 LUA.0: LINDA:: User FUNCTIONS loaded...48111 LUA.0: LINDA:: Initializing MCP2 (Boeing)54570 LUA.0: LINDA:: RADIOS : Empty command for :: COM1 Select55880 LUA.0: LINDA:: Loading a fallback joysticks config...55896 LUA.0: LINDA:: Loading PMDG 777 joysticks config...55896 LUA.0: LINDA:: Module: PMDG 777 Started...55896 LUA.0: LINDA:: Ready to go, Captain!55896 LUA.0: LINDA:: [awg] Initiating Autosave true55927 LUA.0: LINDA:: Airborne ...55942 LUA.0: LINDA:: Offsets watching list cleared!217045 Advanced Weather Interface EnabledIs there something I should do? Or do I even have to be concerned? FSUIPC is 4.939e and ASN is SP2 build 5540. P3D is 2.5.2944Thanks. -
Thank you!
-
Welcome back...
I believe I have asked this question before and I do apologize for revisiting. However, there is something I cannot make work.
I use your button screen in WideFS. Thank you so much for the facility. I have just purchased the PMDG 777 for P3D. I have toggle buttons for chocks and external connections.
Chocks default to ON when the aircraft opens. You can then connect ground power, air start and A/C.
If the chocks are removed, all external services are automatically disconnected. This puts me in a situation where the state of the button(s)...toggle ON, are out of sync with the aircraft.
Looking at the library, I see ipc.setbtnstate(btn, state) and ipc.setbtnstateonly(btn, state). I have a LUA script to remove the chocks. Is it possible to use one of the button state functions to change the state of the buttons that control the ground connections?
Example:
--remove chocks and toggle ground power button to off. Assume button in question is 177
if ipcPARAM == xx then
RemoveChocks()
ipc.setbtnstate(177, 0)
end
This does not work for me. I am sure I am missing something obvious. The library says 'WideFS only'. Perhaps this is telling me that the logic has to exist on the client machine. If so, I have no idea how to tell WideFS that a change has bee made on the main machine, and to invoke a lua script to change the button state. I don't even want to go there. I apologize if I am being thick, but I don't quite know what I need to do to make this work; or even if it is possible.
Thanks.
-
Can't help you technically, but if you paid with PayPal, they will help you reslolve the issue.
-
Thanks for this Paul. I'll start my research.
-
I just purchased the PMDG 777 for P3D. I have it installed in 2.5. I use the button screen, thanks for that, to program controls. I learned a lot doing the Aerosoft Airbus, but it seems this is a different bird.
I had a brief look at the SDK and it appears that everything is programmed using C++. Perhaps I misinterpreted that. I was hoping to reference local variables and write lua scripts to assign to button screen buttons.
I am seeing entries like this in the LINDA module: ipc.control(PMDGBaseVariable +CDUCstartVar+ 38, 1). I am unfamiliar with that. I am not asking you to second guess what the good folks at LINDA are doing. I just want to get a start. I could hack LINDA and copy the necessary routines into a file in the Modules folder, but I'd feel like a bit of a burglar. I dabble a bit in C# and if necessary, I could look into acquiring a few C++ skills. I'm a little leery of that, given it interacts with Windows at a lower level than managed languages. I don't want to flush my toilet when I move the throttle!
If I could be pointed in the right direction, I would appreciate it. You know, it would be brilliant if LINDA would support the button screen. I don't think I'll hold my breath though.
Hope you had a good trip.
Controller Order
in FSUIPC Support Pete Dowson Modules
Posted
Thanks again.