GCNorth

Hi Pete, Basically, the problem was that a number of the buttons on the yolk were screwed up! I solved the problem when I discovered that the button assignments in fsx had reappeared-don't know why. I erased them and everything seems to be working well. Thanks, Gerry

Hi Pete, I have been using FSUIPC registered version for about two years now, and it works great. However, I recently encountered a problem that I don't understand. I am using version 4944a and have programmed my CH Eclipse yoke using compound key assignments for each plane. This is the programming i have for the Lancair Legacy: 0=CR(+A,24)(-A,0)A,1,C65588,0 ;GREEN-break 1=CU(+A,24)(-A,0)A,1,K116,8 ;GREEN-Retract flaps fully 2=CP(+A,24)(+A,0)A,1,C65589,0 ;GREEN-toggle Spoilers 3=CP(+A,24)(+A,0)A,2,K65,8 ;GREEN-next view 4=CP(+A,24)(-A,0)A,2,K86,11 ;GREEN-view virtual cockpit forward (C+S+V) 5=CP(+A,24)(+A,0)A,3,K83,8 ;GREEN-next category 6=CP(+A,24)(-A,0)A,3,K52,9 ;GREEN-Default GPS 500 7=CP(+A,24)(-A,0)A,4,C66079,0 ;GREEN-gear up 8=CP(+A,24)(+A,0)A,4,K56,9 ;GREEN-ICE Gauge 9=CP(+A,24)(-A,0)A,5,C66080,0 ;GREEN-gear down 10=CP(+A,24)(+A,0)A,5,C1009,0 ;GREEN Traffic Density Toggle 11=CP(+A,24)(-A,0)A,6,C65759,0 ;GREEN-flaps retract 12=CR(+A,24)(+A,0)A,6,C65656,0 ;GREEN-zoom out 13=CP(+A,24)(-A,0)A,7,C65758,0 ;GREEN-flaps extend 14=CR(+A,24)(+A,0)A,7,C65655,0 ;GREEN-zoom in 15=CR(+A,24)(+A,0)A,8,C65607,0 ;Green-Elevator Trim Down GO UP 16=CP(+A,24)(-A,0)A,8,K87,11 ;GREEN-cycle thru interior views (C+S+W) 17=CR(+A,24)(+A,0)A,9,C65615,0 :GREEN-Elevator Trim Up GO DOWN 18=CP(+A,24)(-A,0)A,9,K50,9 ;GREEN-Default GPS 19=CP(+A,24)(+A,0)A,10,C66530,0 ;GREEN-eyepoint reset 20=CR(+A,24)(-A,0)A,10,K85,8 ;GREEN-next checklist item 21=CR(+A,24)(+A,0)A,11,K73,11 ;GREEN-Insrument Panel (C+S+I) 22=CR(+A,24)(-A,0)A,11,K85,9 ;GREEN-next checklist sublist 23=CR(+A,24)(+A,0)A,12,K83,11 ;GREEN-Radios (C+S+S) 24=CR(+A,24)(-A,0)A,12,K85,10 ;GREEN-quit checklist 25=CR(+A,24)(+A,0)A,13,K84,11 ;GREEN-VM1000 (C+S+T) 26=CP(+A,24)(-A,0)A,13,CL3:R,0 ;Voice Checklist 27=CP(+A,24)(-A,0)A,14,K75,8 ;GREEN-Kneeboard Show/Hide 28=CP(+A,24)(-A,0)A,15,K112,10 ;GREEN-Kneeboard Switch Document 29=CP(+A,24)(-A,0)A,16,K79,10 ;GREEN-Kneeboard Open Document 30=CP(+A,24)(-A,0)A,17,Cx02000C1A,x0400 ;GREEN Time 4 Speed 31=CP(+A,24)(-A,0)A,18,Cx02000C1A,x0200 ;GREEN Time 2 Speed 32=CP(+A,24)(+A,0)A,20,C65876,0 ;GREEN-kneeboard View 33=CP(+A,24)(-A,0)A,20,K86,10 ;GREEN-Wing Leveler Toggle 34=CP(+A,24)(-A,0)A,21,C65561,0 ;GREEN-pause toggle 35=CP(+A,24)(+A,0)A,21,Cx02000C1A,x0100 :GREEN Normal Time Speed 36=CP(+A,24)(-A,0)A,22,K53,9 ;GREEN-Weather Gauge 37=CP(+A,24)(+A,0)A,22,K90,9 ;GREEN-Frame Rates I use the first CH yoke button 0 for compounds. However, in the last two days I've noticed that when I press the 0 button, it releases the parking brake as well as performing a compound command. For example, in line 3 above, it releases the parking brake as well as going to the next view. Just pressing the 0 button releases the parking brake. It appears some value has been assigned to the 0 button. I opened the Lancair flight and just pressed the 0 button four times with the following FSUIPC4.log: 2490010 System time = 08/09/2015 12:16:42, Simulator time = 12:12:19 (19:12Z) 2490010 FLT path = "C:\Users\Gerry\Documents\Flight Simulator X Files\" [Continuation log requested by user] Running inside FSX on Windows 7 Module base=16E20000 2490010 LogOptions changed, now E0000000 0000000D 2490010 [buttons] now profile-specific: 2490010 11=CP(+A,24)(-A,0)A,6,C65759,0 2490010 13=CP(+A,24)(-A,0)A,7,C65758,0 2490010 15=CR(+A,24)(+A,0)A,8,C65607,0 2490010 27=CP(+A,24)(-A,0)A,14,K75,8 2490010 28=CP(+A,24)(-A,0)A,15,K112,10 2490010 29=CP(+A,24)(-A,0)A,16,K79,10 2494003 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2494035 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2494081 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2498372 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 0 (0x00000000) PARKING_BRAKES 2500088 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2500134 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2500166 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2501632 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 0 (0x00000000) PARKING_BRAKES 2502942 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2502989 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2503020 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2504268 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 0 (0x00000000) PARKING_BRAKES 2505626 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2505672 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2505704 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2508402 *** EVENT: Cntrl= 65752 (0x000100d8), Param= 0 (0x00000000) PARKING_BRAKES 2509214 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2509245 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2509292 *** EVENT: Cntrl= 65588 (0x00010034), Param= 0 (0x00000000) BRAKES 2513519 Sim stopped: average frame rate for last 23 secs = 25.5 fps 2518371 LogOptions changed, now 00000000 00000001 2730875 Sim stopped: average frame rate for last 212 secs = 20.9 fps [Log closed by user request, and continued in new file] 2747895 System time = 08/09/2015 12:21:00, Simulator time = 12:16:15 (19:16Z) 2747895 *** FSUIPC log file being closed Minimum frame rate was 14.9 fps, Maximum was 30.0 fps Minimum available memory recorded was 32768Mb Average frame rate for running time of 2450 secs = 27.5 fps G3D fix: Passes 23281, Null pointers 0, Bad pointers 0, Separate instances 0 Memory managed: 1097 Allocs, 1094 Freed ********* FSUIPC Log file closed *********** FSUIPC4 has worked flawlessly for several years. Hope you can help. Regards, Gerry