alan140

SPAD new version available, with special ngx mode for PMDG and with the last version of fsuipc 4.834 works exellent!!! Thanks to Maxx and Pete Dowson too Enjoy NG!!!

Hello Pete I have installed fsuipc version 4.828 and i read the information about fsuipc changes.pdf for example, the part where it says: 10- Added facilities in Buttons, Keys and Axes assignment tabs to assign to any custom controls using FS control numbers in the range 65536 to 131070. This includes all of those 2Events" listed in the PMDG 737NGX SDK. Assignment is done by selecting <custom Control> from the drop-down list and entering the number (in decimal, or in hex preceded by an 'x') in the dialogue which appears. Assignments made like this are shown as <nnnnn> (in decimal) unless the number does actually match a real listed control, in which case it'll appear with its assigned name. well i did this thing taking the information from the pmdg_ngx_sdk H file for example: // Control Events #ifndef THIRD_PARTY_EVENT_ID_MIN #define THIRD_PARTY_EVENT_ID_MIN 0x00011000 // equals to 69632 #endif and then: // MCP #define EVT_MCP_HEADING_SELECTOR (THIRD_PARTY_EVENT_ID_MIN + 390) when i set the provide custom control value (69632+390) in fs control of the fsuipc it displayed <99840> but there is no action. actually im using saitek multipanel with spad drivers thanks

Well i ve tested in another computer with Windows xp and works, thanks billydragon and thanks to Fabricio too for your help the only thing is that i use the spad driver and the sáitek driver too, and another question that i have is if your hdg and alt are the same values in the multipanel display that in the pmdg mcp, the crs and speed are the same Thanks

Thank you guys but theres no case i did everything that you told me, im going to wait pete to ask him why doesnt work, i already have the fsuipc.ini configure in the way you told me fabrizio, the saitek multipanel and radio panel that i have works fine with default aircraft and with the ifly too. well i give up with pmdg ngx thanks a lot

Try to clean up file like FSUIPC4.ini i mean remouve it and also the Default.ini inside SPad folder after backup them and restart FSX and Spad. Hi Fabrizio, i send you my fsuipc.ini file to take a look maybe there is a diferent in the simconnection or something if you can check with your fsuipc.ini file, and i copied the default spad file too as yours thanks [General] UpdatedByVersion=4827 History=07SFD1VZ33UV6SIA00TEW MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=No UseProfiles=Yes EnableMouseLook=No AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Cessna Yoke 0.GUID={88E265A0-2A59-11E1-8002-444553540000} 1=Saitek Pro Flight Cessna Rudder Pedals 1.GUID={88E265A0-2A59-11E1-8001-444553540000} [buttons] ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [WideServer] WideFSenabled=Yes [sounds] Path=C:\FSX\Sound\ Device1=Primary Sound Driver Device2=ATI HDMI Output (ATI High Definition Audio Device) Device3=Speakers (Logitech USB Headset) Device4=Independent (R.T.C.) Headphones (IDT High Definition Audio CODEC) Device5=Speakers / Headphones (IDT High Definition Audio CODEC) [Profile.pmdg 738] 1=Boeing 737-800NGX PMDG House 2=PMDG 737-800NGX PMDG House Winglets [Axes.pmdg 738] 0=0Z,256,D,22,0,0,0 1=0U,256,D,9,0,0,0 2=0V,256,D,10,0,0,0 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Spoilers=-16380,16380/16 [buttons.pmdg 738] ButtonRepeat=20,10 1=R1,0,C1001,0 2=U1,0,C1002,0 3=R1,5,K35,8 4=R1,4,K36,8 5=P1,2,K90,8 6=P1,3,C65860,0 7=P2,2,K113,8 8=P2,0,K113,8 9=P2,4,K190,10 10=P2,5,K191,9 11=P64,0,CL1:R,33 12=P64,1,CL1:R,27 13=U64,0,C0,33 14=P64,3,CL1:R,22 15=P64,4,CL1:R,31 16=P64,5,CL1:R,32 17=P65,4,CL1:R,8 18=P65,5,CL1:R,7 19=P64,2,CL1:R,28 20=P64,6,CL1:R,30 21=P65,0,C65595,0 22=P65,1,C65603,0 23=R66,0,CL1:R,17 24=R66,4,CL1:R,13 25=R66,5,CL1:R,14 26=R66,6,CL1:R,16 27=R66,1,CL1:R,18 28=R66,2,CL1:R,19 29=R66,3,CL1:R,20 [Profile.ifly737ng] 1=iFly 737-700 (Normal screen) [Axes.ifly737ng] 0=0Z,256,D,22,0,0,0 1=0U,256,D,9,0,0,0 2=0V,256,D,10,0,0,0 3=1X,256,D,7,0,0,0 4=1Y,256,D,8,0,0,0 [JoystickCalibration.ifly737ng] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 Spoilers=-16380,16380/16 [Profile.boeing737ng] 1=Boeing 737-700NGX PMDG House Winglets [buttons.boeing737ng] ButtonRepeat=20,10 1=R1,0,C1001,0 2=U1,0,C1002,0 3=R1,5,K35,8 4=R1,4,K36,8 5=P1,2,K90,8 6=P1,3,C65860,0 7=P2,2,K113,8 8=P2,0,K113,8 9=P2,4,K190,10 10=P2,5,K191,9 11=P64,0,CL1:R,33 12=P64,1,CL1:R,27 13=U64,0,C0,33 14=P64,3,CL1:R,22 15=P64,4,CL1:R,31 16=P64,5,CL1:R,32 17=P65,4,CL1:R,8 18=P65,5,CL1:R,7 19=P64,2,CL1:R,28 20=P64,6,CL1:R,30 21=P65,0,C65595,0 22=P65,1,C65603,0 23=R66,0,CL1:R,17 24=R66,4,CL1:R,13 25=R66,5,CL1:R,14 26=R66,6,CL1:R,16 27=R66,1,CL1:R,18 28=R66,2,CL1:R,19 29=R66,3,CL1:R,20 [LuaFiles] 1=PMDG737NGX_AP.LU 2=PMDG737NGX_OVH.L

First there are two file on the post from Billydragon One is PMDG737NGX_AP.LUA you must copy and paste from -- PMDG NGX737 module v. 1.4 -- to END The other one is PMDG737NGX_OVH.LUA same story on pasting on the text. Place them in FSX\Modules Normally FSUIPC will recognize them as you start FSX otherwise paste in FSUIPC4.ini those line below [LuaFiles] 1=PMDG737NGX_AP 2=PMDG737NGX_OVH Open spad go to multipanel rotary tab chose FSUIPC Virtual Button Open FSX Go to FSUIPC tab Button+Switches Select FS control and choose PMDG737NGX_AP Click send button to Flight Sim In Parameter of tab Button+Switches field type 15 for HDG clockwise the same that there is in the list from Billydragon if you want you can change the order --function NGX_AP_HDG_inc () if ipcPARAM == 15 then then go ahead with the same method for couter clockwise and for the other function. Hope that help It's similar with the macro method but it's more pawerfull for function like increase fast rotation and other SDK aspect. Well i do exactly as you told me but theres no action, i have fsuipc version 4.827 updated version, i chose in button and switches -fs controls- lua PMDG737NGX_AP.LUA and parameter 15 for HDG increase everything but no action i really apreciate your help guys but i go on using the ifly that works great with saitek multipanel due to the ifly module intalled in the modules file thanks

Got it only Autothrottle dosn't work I think there is an error, as you can arm but not disarm. Thank you. Hi Simbio, can you make it work? because i really want to know if that way works fine like billydragon said, well in that case i will need some help configuring it thanks

Please i need help with the lua files, i do everything that speedbird told me and now when im trying in option button and switches i choose for example the lua PMDGNGXAP.LU and parameter 15 for HDG but nothing happen, my question is? what lua option i must choose for configure the HDG,ALT,SPEED rotary knobs thanks

Ok now i can write because i was writing and the forum dont let post

hi

I tried that too but doesnt work in that way, the thing is to create a new lua file and then assign manually the buttons via spad, as virtual button, in the list above is provided the information to configure it, well other thing that could be interesting is that peter dowson create a new FS MODULE for pmdg ngx as the IFLYMODULE, that works exelent with the saitek multipanel.

This original from Linda files for PMDG_737NGX i just modify to support Spad with FSUIPC. Just make Spad send every things as Virtual Joystick then Assign buttons to run Lua Script with parameter equivalent to function listed . Hi Billydragon, and thanks for the information above i am trying to do everything that you told me and i cant make it work, did you use as default configuration in spad or in the manage files you create a PMDG737NGX_AP directory? well i´´ll keep trying or if you can tell me how is composed your modules files i mean to have an idea thank you

Hello pete I am using spad to configurate the offset but i cant make it work, i select in the fsuipc buttons and switches, offset by word set, the offset parameter for hdg, or other function and theres no result, my question is there any chance to configure the offset to make the sáitek multipanel to work with pmdg ngx? Thanks

Hi i have Version 4.823 by Pete Dowson, im trying to configurate saitek multipanel with pmdg ngx via offset configuration, i already read the information about PMDG 737NGX external connection SDK // and offset for pmdg my question is how i must do to configurate this offset? thanks