Marco Aurelio
-
Posts
44 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Marco Aurelio
-
-
Hi Downson,
Can I run Ivap User Interface on another PC using WIDE FS only ?
Thanks.
Marco Aurélio.
-
Microsoft has released a patch to fix Windows 8.1 mouse issue..... http://support.micro....com/kb/2908279
Regards,
Marco Aurelio
-
Microsoft has released a patch to fix Windows 8.1 mouse issue..... http://support.microsoft.com/kb/2908279
Regards,
Marco Aurelio
-
Hi .....
In my case I've just found that LINDA was causing the problem when it was loading together FSX. This problem appeared after windows 8.1 update. Now i'm initializing LINDA after FSX...into the simulation itself. I'm using FSUIPC 4.921i. I'm not using FSUIPC Mouse Look.
I hope that can helps someone else..
Regards,
Marco Aurelio
-
Ok Downson...I apologize for this inconvenience.
I`ve appreciated your time.
Warmly,
Marco Aurelio
-
No Pete I'm using FSUIPC....version 4.921i....All my assingments are done via FSUIPC....What I said was ...even using a default aircraft....
Thanks,
Marco
-
Hi Pete...
Yes, what I meant was...When I star-up FLY NOW in the FSX...even with some default aircraft....sometimes the associated button at mouse wheel works perfetly...sometimes doesn't......for panning views. By-the-way FSUIPC Mouse Look is unchecked.
Marco
-
Hi Pete...
Seems that the problem remains.....Sometimes I achieve to use Mouse wheel button for panning views in Virtual Cockpit sometimes don't...and more recently I have been experimeting some crash-to-desktop.... Could you help me to solve that problem ?..By-the-way I'm using Windows 8.1 pro 64 bits.
Thanks.
Marco Aurelio
-
Mr. Dowson, I've just reinstalled the EZCAM and the problem has gone....sorry .
Best regards and congratulations to your support and attention !
Warmly,
Marco Aurelio.
-
Ok...now 4.921i ,
I used to panning views in VC holding mouse wheel button...Recently after updated to release 4.921f...and now 4.921i, I noticed that it no longer happens. Does it make sense ?
Thanks Peter....BTW wind tab is an outstanding job !
Warmly,
Marco Aurelio.
-
Sorry Peter...
Seems that this topic was worked before.....After I have installed version 4.92 I no longer achieve to use my mouse wheel to Pan view and zoom in and out it. I`m using EzCam too, although I achieve moving switches and knobs.
Thanks.
-
If I've understood .....By-The-Way 4.90 !
Regards,
MX.
-
Hi Pete,
Congratulations once more to Winds Tab on Fsuipc...I don't know how I could survive during all this time without using Winds Tab...Unbelievable !!! :razz:
Warmly,
Marco Aurelio.
-
Pete,
I've just logged your sent code. Thanks once more !
Let me try the new Fsuipc.ini for some time and I'll report to you the results. BTW I'm running Airbus X A320/A321 with apparent better results in Preview DirectX 10.... although the page 7 of Volume 1 of the Airbus X documentation advises to Keep it off.
Warmly,
MX
-
Hi Pete and Ian,
Are you running Airbus X A320/A321 on FSX in Preview DirectX 10 mode ?
Thanks,
MX...Marco Aurelio
-
Thanks Ian P and welcome.
Marco Aurelio
-
Hi Pete and everyone else,
The FSUIPC is a huge tool and extremely necessary for any serious simmer. All of us use GA Aircrafts and Airliners, and more then one Airliner, so WE NEED to be able to CREATE PROFILES... so The Manufactures Know that and MUST considering that..., the FSX assignments, as everyone might Knowing, is very..very limited. There is nothing wrong with FSUIPC. There are few and serious issues in the Airbus X A320/321, a spectacular project from Aerosoft, that certainly will be fix for them, and those issues has nothing to do with FSUIPC.
Pete, I apologize to waste your time.
Congratulations once more to your serious and important work for The World FSX's Community !
Warmly,
Marco Aurelio.
-
Ok Pete... Thanks.
Warmly,
Marco Aurelio.
-
Congratulations to ....
Marco Aurelio
-
Hi Pete,
Sorry for re-open this Post.
First of all, YOU WERE RIGHT ! What I did.... have been deleted Fsuipc.ini, if you remember, really didn't make sense.
Just reviewing...I said that...No axis assignment in Axis Assignment window for an specific aircraft,...that was Airbus X A320/A321 ( Formely Airbus X Extended, as you know... ;-) ) Said That....Today I realize that to assign axes in Airbus X A320/A321...beyond of the Aerosoft's Airbus X A320/A321 Documentation, in chapter 8, the aircraft has to be with hydraulic system working ! I was in Cold & Dark state when I was trying to setup the axes. When the electrical hydraulic pump got on, The axes came alive and FSUIPC could see the axes....does it make sense now ?
Here is the link for a picture of Aerosoft X A320/A321 Overhead Panel...without engines running yet but... Yellow ....Electrical Pump On in Hydraulic Panel.. https://www.dropbox....X A320 A321.png .
Thanks Peter.
Marco Aurelio
-
It seems that your problem is similar to mine.....see the POST No Axis Assignments in Axis Assignment Tab for a Specific Aircraft, in this forum. This happened after I've updated to 4.90.
Peter sorry, I've forgot to mention this in my Post.
Cheers....
-
Ok..., :razz:
BOB is a ORBX's creation, actually not a Aircraft, is something to walk around in its sceneries....You can see it in ORBX freeware section.
Warmly,
Marco Aurelio
-
Thanks Peter...
Everything goes well now. About reverse... the original file INI had most GA Aircrafts, I was experimenting ORBX sceneries and REX, and had started to configure 737 NGX. It is a new PC. The profile below had three aircrafts, I believe...am I right ?
[Profile.C 185 F]
1=C185F SKYWAGON
2=Cessna Skyhawk 172SP
3=BOB
In my New INI, there is now an Airbus 32 profile....in building phase yet....ok ?
[Profile.Airbus 32]
1=Airbus A321 Air Berlin D-ASLB
2=Airbus A320 Finnair OH-LXD
3=Airbus A321 NEO Finnair OH-NEO
[Axes.Airbus 32]
0=0R,256,F,65764,0,0,0
1=2X,256,F,65763,0,0,0
2=2Y,256,F,65762,0,0,0
3=2U,256,F,66420,0,0,0
4=2V,256,F,66423,0,0,0
[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=-16159,0,0,16288
Elevator=-16287,0,0,16320
[buttons.Airbus 32]
0=R2,21,C65966,0
1=U2,21,C65967,0
Best Regards and congratulations to your well worth contribution to FS's World Community,
Marco Aurelio.
-
Hi Dowson,
Here is the link to Fsuipc.ini files, Original and the New one: https://www.dropbox....gkir/SqHn4bJN3D . I agree with you, seems that make no sense what I did, but....
Thanks once more,
Marco Aurelio.
Multi PC IVAP on FSX
in FSUIPC Support Pete Dowson Modules
Posted
Thanks Pete....Mr. Dowson.....I'll remember that next time.
Warmly,
Marco Aurélio.