[EpicInfo Timing issue]

Thank you.

Daniel

[EpicInfo Timing issue]

Good day Peter,

hope you're doing well.

I have read in your documentation that some PHs are scanned more often than others and I understand why and it makes sens.

But if (for a special projetc) I don't use any Sets and only use PH via the FSUIPC_Read feature, will it affect the scanning rate which PHs i choose to use ?

My epicinfo.cfg file looks like this:

[fanda]

Log=0

FSUIPC_WRITE_1=Y15,2,50C0

FSUIPC_READ_1=129,2,50C2

FSUIPC_READ_2=130,4,50C4

FSUIPC_READ_3=131,2,50C8

FSUIPC_READ_4=132,2,50CA

FSUIPC_READ_5=133,2,50CC

FSUIPC_READ_6=134,2,50CE

FSUIPC_READ_7=135,2,50D0

FSUIPC_READ_8=136,2,50D2

FSUIPC_READ_9=137,2,50D4

FSUIPC_READ_10=138,2,50D6

FSUIPC_READ_11=139,2,50D8

FSUIPC_READ_12=149,2,50DA

FSUIPC_READ_13=141,2,50DC

FSUIPC_READ_14=142,2,50DE

So, basically, my question is that if I use PH 118 instead of PH 129,

will it make a difference in the updating rate ?

Thanks and best regards,

Daniel

[EPICINFO 4.22 QPROC 96 and 97]

Ouch!...

Stupid mistake...

when i saw your post with Sets=CP ,

it clicked...i had forgotten the line Sets=All in my CFG file.

Sorry Peter...

Thanks

Daniel

[EPICINFO 4.22 QPROC 96 and 97]

Sorry...i should have included more details.

I have FS2004 and EPICINFO 4.22

I have used the log in and can confirm that no change is recorded

by it for qproc 96 and 97.

I have tested another qproc just to make sure and qproc 18 and 19

were beeing recorded in the log file when i pressed the autopilot button..

but when I switched from parking brake on and off, no values recorded.

Regards,

Daniel

[EPICINFO 4.22 QPROC 96 and 97]

Peter,

did you ever got any reports that qproc 96 and 97 for parking brakes are not working ?

I've been trying for a long time but no joy...

I use qproc 98 and 99 for my prop sync LED with no problem.

The doc says it is derived from PARKING_BRAKE_POS...

is there a PH for this ?...can't seem to find one.

Best regards and wish you a very happy new year !

Daniel

[EpicInfo 4.21 FSUIPC_write command]

Yes, that would work...

it would have been easier if the SetMap command would have worked

but that's ok.

Thanks

Daniel

[EpicInfo 4.21 FSUIPC_write command]

Good day Pete,

I would like to be able to send a real axis value via the FSUIPC_write

command to a specific offset. The command does not allow to do this

per the documentation so I have mapped the real axis to a soft axis (SetMap) but again, it does not work.

If i set the soft axis to a specific value using SetR15=something, it does work.

I have the ISA EPIC card.

Can this be fixed or is there any other way to do this ?

Regards,

Daniel Boulay

[EpicInfo PH greater than 128]

ok, thanks.

I`ll check with R&R.

Daniel

[EpicInfo PH greater than 128]

Pete,

have you received any reports on Pigeon Holes greater than 128 not working with epic ISA card...

I have WIN98, Epic card ISA, epicinfo 4.20, FSUIPC 3.10 (not registered yet) and I tried these lines:

DefinePH(133,Test,0,0,0,0)

:Test { }

As you can tell, I did not try to do anything with the value...

I also tried the above lines with PH 129...

Results:

My joystick axis would freeze...some not all...and different result if

i used 129 and 133...

And, after loading it the first time, I would then get an error when compiling my EPL file...wrong version...using eplstrip.exe program.

I would remove these 2 lines and it's fine after.

Since those PH values are for lever positions, could it be that they

only work with the USB version ?

Regards,

Daniel

[Esound]

Yes, i still have the ISA...hate to spend another 500$ CAN for something i already have but i know that day is coming and i will have to get

the USB one...and yes, WIN98 because of my ISA card.

Daniel

[Esound]

Pete,

happy to report that esound 2.572 with epicinfo 4.20 and fsuipc 3.08

with FS2004 is working fine.

I did find the fs9.cfg file and was able to just copy and paste from

my fs2002.cfg file for joystick assignments.

I can tell you that fs2004 does NOT pick up axis very well from EPIC

when trying to use the MSFS assignment page.

so, had to do the good old fashion way.. edit the cfg file manually.

thanks for your help in this matter...it all started with esound and

it is now working nicely...2.572 seem to be a good version for

2002 and 2004.

Regards,

Daniel

[Esound]

Let me read more on it...

as you may remember, i have the epic card which gives me

16 virtual joysticks and fs2004 did not pick up some of them...

With fs2002, i programmed the axis manually in the cfg file...

i`ll just do the same with fs2004.

I was looking fs2004.cfg on the main menu like it was with fs2002.

Like I said, i just got fs2004 so i do have some reading to do.

Thanks again,

and i`ll be registering fsuipc soon also since i do like it and need

all the functions (especially the joystick calibration part).

Daniel

[Esound]

Pete,

got my system working again (thank god !)

After a quick test,

Esound 2572, with FSUICP 2.975 and FS2002 is now working fine.

Great stuff Pete !

I have just installed FS9 but have not installed FSUIPC 3.xx yet so

i can't report on that...having some video problems which i'll have to deal with.

BUT, I can't find the usual fs2004.cfg file ....

is it replaced by something else cause i can't program my

EPIC joystick axis with fs2004 menu.

Thanks,

Daniel

[Esound]

Pete,

thanks....i'll try it...

my system is down now but should be back soon...

i'll let you know.

Daniel

[Esound]

OH, by the way...

i tested it with FSUIPC 2.975 and 3.08.

Dan

[Esound]

After a quick test, no joy Pete.

Like I said, i'm OK with it since 2.54 works good so no rush for me.

And i can't test it with FS2004 yet.

I'm just surprised that it seems that not a lot of folks are using it.

It is a great module....

my cabin announcements are automatic...i can even select the sound

cards and direct that sound into my headset with lower volume...

it's so nice...it's like the real thing...i'm listenning to cabin annoucements

and making sure my cabin crew are doing their jobs...lol

It adds realisme and what is so nice about it, it is triggered automaticaly

so i don't even have to press a button....

for example, when i'm airborn, ALTITUDE_ABOVE_GROUND>=3000,

there is that wav file that starts automaticaly saying:

now that we are airborn, etc..etc...

Man, i sure hope you keep this DLL going...

i think most folks don't understand how to use it and what it does.

thanks for your fast response Pete,

Daniel

[Esound]

Peter, for your consideration, here are my findings...

First, button triggers always work...we're talking about token

varialbles triggers.

I have found an older version of Esound and did some tests:

Esound 2.57 with FSUIPC 3.08, no joy

Esound 2.57 with FSUIPC 2.975, no joy

Esound 2.54 with FSUIPC 3.08, works

Esound 2.54 with FSUIPC 2.975, works

As a reminder, i still have FS2002.

so for now, until I updated to FS2004 (which should not be too long),

I will use FSUIPC 2.975 and Esound 2.54.

Thank you for your time and effort,

Daniel

[Esound]

Good evening all,

i realize Peter is not supporting Esound but maybe someone can help.

I use Esound 2.57 with FSUIPC 2.975 with FS2002.

Works great except i can't get any token variables to work.

Here's my esound.cfg file:

[Devices]

1=Primary Sound Driver

2=C-Media Audio Direct Sound Driver

3=DirectSound (SB Live! Wave Out [E400])

[settings]

1 = 2,50,C

2 = 3,60,C

3 = 3,30,C

[sounds]

1 = SAC1.wav

2 = SAC2.wav

3 = SAC3.wav

4 = SAC4.wav

5 = SAC5.wav

6 = SAC6.wav

7 = SAC7.wav

8 = music.wav

9 = cbding.wav

10 = revbetahorn.wav

[Triggers]

1 = B496:0,9,2 ;Fasten seat belt ON or OFF

2 = B497:0,1,2 ;Fasten seat belt ON

3 = B498:0,3,2

4 = B499:0,4,2

5 = B500:0,5,2

6 = B501:0,6,2

7 = B502:0,7,2

8 = B507:0,2,2

9 = B505:0,8,3,LOOP

10 = B505:1,STOP9

11 = B506:0,10,1,LOOP

12 = B506:1,STOP11

13 = AIRSPEED>=20,10,2

Everything woks fine except trigger 13...

Sound 10 works with B506 but not with airspeed greater or equ to 20...

and I have tried other token variables but no joy...

any ideas anyone....

Peter, knowing that you don't support it, did you get report

that this actually works because I fail to see what my mistake is

if any and i know there has been problems with it in the past.

thank you,

Daniel