[Create a checklist in fsuipc and lua is this possible with fs20]

At the time it was with a simmeur friend, who gave me his lua file and I adapted it to my checklists. (Unfortunately he died away 3 years ago).
And so today I am looking in the lua manual and without success!

[Create a checklist in fsuipc and lua is this possible with fs20]

Hello,
a few years ago under Fsx and P3D, I had succeeded in creating a lua file which would be in the Fsuipc folder to create my vocal checklists.

It included all the items of an airplane checklist and each item was read by a voice command in lua.
when the switch or button was set I validated with my voice and lua read me the following item.

The big problem is that I totally forgot how to redo such a file for FS20. Because I really enjoy doing checklists this way.

Since then I used VoxAtc (paid) but extremely long to create the checklist. With Lua and fsuioc, it was much faster.   edit : VoiceAtack and no VoxAtc excuse me

If you could just put me 3 1st line of checks to help me?

I did not find precise information in the 'lua' manual of the Fsuipc file.

ex:
battery - ON
Parking brake - ON
parking brake - release
Generator - on

thank you in advance for your help.

 

 

[Brake calibration problem Yoke ok]

Video 2 shows it well:
right brake and left brake is affected.
Strangely, the rudder is recognized.

observe on the image above 3 red crosses.
another oddity: R: is recognized btn 31
L: both: start are not recognized
While in FS20 commands it is recognized

[Brake calibration problem Yoke ok]

Bonjour,

Brake calibration problem
here are 2 short videos to illustrate this.

Vidéo 1: yoke ok
Video 2, brake calibration page:
when I press: set (I press the brake at the same time, but you can't see it in the video) but you can see that it doesn't react.

video 1

video 2

[[RESOLU] Fsuipc7- problem button]

Thanks for your help.
I restarted the disconnected PC and reconnected the Xbox controller.
launch Fsuipc7 and the simulation and there strangely everything worked correctly.
For the B key: I had checked an inappropriate box.
Everything is ok now.
I will test the assignment of my yoye and hotas-thrusmaster with fsuipc, if I have any problems I will let you know.

[[RESOLU] Fsuipc7- problem button]

Bonjour,

I assigned functions to my Xbox controller which is well recognized, I also assigned 2 axes (in test)
but when i am in mfs20 , the axes and buttons those do not respond.
it's been several years since I used fsuipc, but I may have forgot a setting?

2) Si je veux recalibrer mes autres joystick dans Fsuipc 7, est-ce que je dois avant supprimer tout ce qui est calibrer dans le menu commande MFS 20?

is my .ini file

 

 

[Sounds]
Path=Sound\Sound\Sound\Sound\Sound\Sound\
Device1=Primary Sound Driver
Device2=Haut-parleurs (Realtek High Definition Audio)
Device3=C32F391 (High Definition Audio Device)
Device4=C32HG7x (High Definition Audio Device)

[General]
UpdatedByVersion=7000b
UseSystemTime=No
JoystickTimeout=20
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
UseProfiles=Yes
WideLuaGlobals=Yes
InvokeFSUIPCOptionsKey=70,12
AxesWrongRange=No
TCASid=Flight
TCASrange=40,3
AxisCalibration=No
DirectAxesToCalibs=No
AxisIntercepts=No
DontResetAxes=No
ThreadAffinityMask=x0
LuaAffinityMask=x0
LogOptionProtect=Yes
AutoConnectToSim=Yes
AutoExitWithSim=Yes
TimeForLuaClosing=2
WeatherReadFactor=2
WeatherRewriteSeconds=1
TrafficStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
ComReadLoopTime=20
Window=1470,760,1970,860
Console=No
ConsoleWindowTopMost=No
ConsoleWindow=51,51,963,568
FSVersionUsed="KittyHawk",11.0.282174.999
SimConnectUsed=11.0.62651.3

[JoystickCalibration]
RudderBlendLowest=1

[Axes]
PollInterval=10
RangeRepeatRate=10
0=EX,256,F,65695,0,0,0    -{ TO SIM: AILERON_SET }-
1=EY,256,F,65762,0,0,0    -{ TO SIM: AXIS_ELEVATOR_SET }-

[Buttons]
PollInterval=25
ButtonRepeat=20,10
0=PE,38,K103,8     -{Key press: Num7}-
1=PE,34,K105,8     -{Key press: Num9}-
2=PE,8,K101,8     -{Key press: Num5}-
3=PE,32,K82,8     -{Key press: r}-
4=PE,36,K70,8     -{Key press: f}-
5=PE,6,K83,8     -{Key press: s}-
6=PE,7,K87,8     -{Key press: w}-
7=PE,2,K65,8     -{Key press: a}-
8=PE,1,K68,8     -{Key press: d}-
9=PE,0,K98,8     -{Key press: Num2}-

Here : 10=PE.......   -{Key press: Num8}-
I have the button: B where I had assigned the key: num8
who does not want to show, I do not understand the reason.

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[JoyNames]
1=Throttle - HOTAS Warthog
1.GUID={1B6748D0-E231-11EA-8002-444553540000}
2=T-Rudder
2.GUID={67A22520-E070-11EA-8001-444553540000}
3=F16 MFD 1
3.GUID={692AE140-37A9-11EA-8001-444553540000}
4=Alpha Flight Controls
4.GUID={1B6748D0-E231-11EA-8001-444553540000}
A=Throttle - HOTAS Warthog
A.GUID={1B6748D0-E231-11EA-8002-444553540000}
B=T-Rudder
B.GUID={67A22520-E070-11EA-8001-444553540000}
C=F16 MFD 1
C.GUID={692AE140-37A9-11EA-8001-444553540000}
D=Alpha Flight Controls
D.GUID={1B6748D0-E231-11EA-8001-444553540000}
5=Controller (Xbox One For Windows)
5.GUID={C8748F00-EEA4-11E9-8006-444553540000}
E=Controller (Xbox One For Windows)
E.GUID={C8748F00-EEA4-11E9-8006-444553540000}

 

[Help me, whith Ifly 737 problem and VRInsight Switch panel]

To solve this problem you need to download the ifly forum IflytoFsuipc version 2.03 and there is a small tutorial.

This small program allows you to program the buttons of the TT panel switche VRinsight in fsuipc.ini file.

It allowed me to program a generic ovh Ifly 737.

This is great.

Merci

[Help me, whith Ifly 737 problem and VRInsight Switch panel]

Hello,

This message is translated by Google, excuse me for the translation errors.

I would like programmer my buttons (VRinsight switch panel) for Ifly 737 OVH.

Ifly have own codes Offset I have a list. but I don't knows how do for programing in Fsuipc.ini, what syntax put exactly.

In Ifly737 menu,There is a file Ifly assignementkey.ini, but the VRinsight buttons are not recognized

I launched the log Fsuipc V.4.853 with the fly POSKY 737,

I found the codes in the log and I copied in the

fsuipc.ini and POSKY buttons Ovh is ok.

Unfortunately, I do not know how to do for with IFLY 737.

I'm not a pro at programming, but with good advice often I manage to solve the problems.

thank you in advance for your help and understanding.

[Problem VRInsight Switch panel]

Thancks your réponse.

My version FSUIPC is :4.858

Attached image:

Left side of the image, this is my ini file with all joysticks,the 1-LINE buttons: repeat and matches my VRinsight 'pad' and here we see no button set, but in fact the lines are inserted in lines 155-159 between the lines of another joystick. and of course I could not guess!

so I deleted all rows (makes a copy before ...) then I restarted Fsx and I set FSUIPC 4 buttons. if you look at the picture on the right is the new ini file and there we can see the lines, which begin with PA. this is the new pad.

It would be really easy to find the button settings if a title with the name of each joystick was shown before the codes.

[Problem VRInsight Switch panel]

Bonjour,

Sorry my english is translate whith Google :

I use the following box:

http://www.flightstore.co.uk/flight-simulation-c499/flight-simulation-avionics-c510/vrinsight-simulation-avionics-c512/vrinsight-tact-and-toggle-switch-panel-p2465

VRInsight my win7 is recognized as a joystick pad, buttons work well in FSX.

But in the FSUIPC ini file shows the correct name 'pad joys' in FSUIPC interface menu buttons, I program a button on his window he recognizes a sample letter: A10, A11 etc ...

but when I open the ini file, I see no line corresponding to the buttons mentioned and no function.

I am very annoyed because I bought 2 modules VR insight to make a generic overhead in my cockpit and I plan to tear hair .... :razz: to learn to program directly in the fsuipc.ini various buttons.

Merci pour votre aide.