Ben van Boom
-
Posts
29 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Ben van Boom
-
-
Ah...i suppose you are heading to your Mountainside?
I live in Zell am See for 9 months now.
We will wait for Holger, thanks and have a nice holiday!
regards,
Ben
-
Hi Francois,
Thanks for your message, I have tongass installed above FSGlobal2008.
It is a fully new install because i am setting up a clean and new PC (very fast one :-) )
By the way....i had the same problems when i installed Glacier Bay (last and old version) a few weeks ago on my former PC.
let me know when i can do something to test.
Regards,
Ben
-
Hello people,
I just installed the new FSGlobal 2008, after the installation the coastlines and mesh is disturbed in FSAddon Tongass area.
Deactivating FSGlobal2008 solves the problem but i would rather see
it working together like with FSGlobal2005. (that worked fine with Tongass)
Anyone else having this problem?
Are there any way's to correct the problem other than deactivating Noth America part of FSGlobal2008?
help is highly appreciated.
Thanks in advance, regards,
Ben van Boom
-
Hi Guy's,
Well....problem solved.
This is a new Computer and the past two weeks i was busy installing all the scenery's i use.
I use a lot of bush scenery's and i discovered that i had installed Bob's Harvey scenery for FS2002 two weeks ago.
Looking after my FS directory structure i discovered this one.
Didn't even knew that i did install this scenery.
After disabling it the runway and taxiway poped up.
So it was the HarveyFs2k that was bothering me.
Thank you very much for your effort.
Regards,
Ben
-
Hello Bob and Francois,
Thanks for the help, besides Emma and de Georenders i have installed
FSGlobal Mesh (like i wrote earlier).
I disabled the Noth American Section of it and didn't change anything.
Sorry to have this rare problem but i will check things out later today.
Come back with you.
Regards,
Ben
-
O.k. Bob, i understand....have a nice day and speak to you later.
regards,
Ben
-
Hi Bob,
Thanks for your prompt reply.
I found just one file named af2_S43.bgl in the
FS9\addon scenery\scenery folder.
What about Monroe, i have a runway there but not on the taxiway's.
Does the taxiways have textures there too or are they supposed to be like the overal .bmp (a bit "blurry")
Regards,
Ben
-
Hello,
I purchased Harvey and Monroe and have a problem.
The runway and taxiway textures at Harvey are missing (only shows the ground BMP of the scenery with a blurry runway and taxiway).
At monroe the runway textures are there but the taxiway textures are missing (only shows the ground BMP of the scenery with a blurry taxiway).
See attached PIC....
I hope there is a solution?
I have installed FSGlobal Mesh but disabeling the North America part won't change anything, so i don't think that has anything to do with it.
Thansk in advance for your help.
Regards,
Ben van Boom
-
Hi Pete,
Thanks for your answer, i will check the documents (and network) and hope i will be able to track it.....
Regards,
Ben.
-
Hi Pete,
I just connected a fourth client to my homebuild cockpit.
Strange thing is that this one is causing the problem that once and a while
there are 28 clients connected, as can be seen in the menubar of FS2004.
This moment there are 4 clients connected, the other moment 11 clients connected and the other moment 28 clients connected......and back to 4 again.
I use the registered versions with PM and aerosoft software.
Any idea's what's causing this?
Kind regards,
Ben
-
Hi Pete,
O.k. i will accept that this PC won't shut down with the hotkey.
What i ment with my question about WinXP shuttung down the PC was that i thought i should configure winXP that way that the PC WILL shut down.
Appearently this is not the case and is everything done within the Wideclient environment.
Regards,
Ben.
-
Hi Pete,
PM support isn't updated by me about this problem.
"Q" key did dhut down PM so i won't cantact them i think.
maybe i found the problem and maybe you can help me.....
The other PC's wich are shutting down with the hotkey CTLR-SHIFT-E on the FS server, aren't configured by me.
Maybe i should tell WindowsXP on the "problem PC" that with this hotkey it should close PM, WC and WinXP?
On the correctly shutting down PC's PM and WC are closing and directly thereafter WinXP is closing and the PC is shut off. So maybe i should tell WinXP what to do?
Can you confirm this and give hints how to do that?
Thanks in advance.
regards,
Ben.
-
Hi Pete,
Thanks for your reply.
Yes all other PC's are o.k. and the program versions are the same.
I must say that i copied the program and .ini from the PC's that are closing o.k. so i don't miss any settings.
Others " programmed those for me and i have put a new PC in the network by myself.
That PC is running o.k. in the network though, i know that because it comes from my wideview system (5 PC's) now into my homebuild cockpit.
Should i put a line somewhere into the server?
The bug on PM loosing registration on non normal closing is known as others told me. It happened on one of my other PC's also.
The "Q"key was unknown by me though....thanks.
I hope you can give some further tips for the shutdown problem.
Regards,
'Ben.
-
Hi all,
One of my 5 PC's in my homebuild cockpit refuses to shutdown with my hotkey "CTL-SHIFT-E".
I have put the line "Allowshutdown" in the clients ini but still one of the PC's refusus to shut down.
Due to this i have to shutdown the PC unregurarely wich causes Project Magenta to lose it registration number.......
Does anyone have some tips for my in order to make it work?
Help is much apreciated.
regards,
Ben
The Netherlands.
-
Hi Rob,
Hmm.......believe me the place is absolutely fantastic and not again to speak about the take-off and dive down....
Screenshots will follow when at least a few houses are there.
First i will have to solve my little Gmax problem, but with all those great guy's on the Avsim scenery design forum it won't last long....
Ultralights are just to slow and toooooooooo cold in the winter...
regards,
Ben
-
Hi Rob,
Everything except ultra lights and balooning sounds good to me.
I just can't wait to get started, i am learning Gmax and scenery design at the moment.
I want some more great airports in the Washington State area....
I have already build a Runway on top of the highest mountain, with view over Emma and "the other Runway with the nice water approach".
I am about to place my first house there too.......since i wasn't one of the first to earn a free house at Diamont Point.........
People can "rent" a house at my "top of the mountain" airfield soon.
You should feel how it is, performing a take-off from my runway at thousants of feel elevation and dive down to Emma .
By the way.......what's vintage?
regards,
Ben
-
Hi,
Is it an easter egg?
There is a VOR YDC of Princeton airport located from Emma heading 206 at 160 nm.
To far to reach its identification over the lake but still.......
You might check out that airfield over there.
Regards,
Ben
-
Hi guy's,
Hihi......i have certainly an advantage......i was the formar Dutch Champion skydiving, jumped for 10 years and made about 700 of them.
When do we start?
regards,
Ben. .................by the way......i quitted 9 years ago..
-
Hi Francois,
You will have to purchase the "Custom Classics III" product for $12,50 through Paypal to a email adress.
I tried but the paypal system won't let me through....
Regards,
Ben
-
Hi,
I have got the same.........but they don't fly high.....i only hear them below 1.000ft.
But they do fly far......i also hear them at Schiphol airport in Europe the Netherlands........ :shock:
Regards,
Ben
-
Planned or not......... you bought the most expensive and high end one.
As long as you wife believes you....it is for a good cause ..... :wink:
Enjoy it !!
Regards,
Ben
-
Hi Rob, Francois,
You are not going to say you two secretly are enjoying Heineken beer at the bar of the EFFC home we do not have......aren't you ?
regards,
Ben :lol:
-
Gentlemen, we are sitting here waiting for your comments on GeoRender3. It's selling very fast (very fast indeed), we can see that but we really want to know how you like it.
Mathijs Kok
LAGO
Hi Mathijs (hi guy's),
To contribute to this tread, my comments:
I can't wait for the Emma Field Flying Club becoming active!
This statement is how i feel about the series of Bush scenery's from Lago.
I am a user of WidevieW and have an outside view of 5 monitors over a 180 degree angle.....using the Georender scenery's in that environment is just great. (for an example how that looks take a look at http://www.dfso.nl/images/cockpit/lowi.JPG and http://www.dfso.nl/images/cockpit/eham2.JPG. Pictures not taken at Emma or Diamont Point though.)
I sure hope to see more of those great scenery's coming out. :lol:
My comments are:
1. winter textures bleeding problem as reported by others but not only on approach but also taxying around the East side of the airport.
2. The sounds of Emma and Diamont Point i hear also on Schiphol airport in The Netherlands when approaching the ground.
I wondered if it is just imagination, suffering from "homesickness to Emma" returning to the Netherlands after those fine bushflights in the Washington state.... :?
Regards,
Ben.
-
Well Jeroen......this is one of the possible solutions for your problem :?:
regards,
Ben :wink:
Tongass and FSGlobal2008
in Tongass Fjords FS2004 Support Forum
Posted
Hi Holger,
It is strange and wierd but i just started up FS and activated north America Mesh of FSGlobal2008 again in order to take the screenshot for you.
After activation (i didn't change the layer priority) Tongass is looking just fine......the problem is solved i guess.
Don't ask how......it just is the case :-)
Thanks very much for your answers guy's, i am happy.
I will be even more happy after GlacierBay2 comes out :-)
regards,
Ben