johnk51
-
Posts
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by johnk51
-
-
I'm trying to setup my Saitek X52 to toggle the taxi lights on/off and the landing lights. I'm using fsuipc4 to do this. I set button 12 to toggle taxi lights and button 13 for landing lights. However, they don't work. My other buttons work, elevator trim, landing gear, flaps, condition levers... I don't know why I can't get these to work. My pmdg 737, 777 work, as well as my small planes. I've even tried offsets for them in fsuipc. And I do have the register version of fsuipc. I would appreciate any help. I can still just click with the mouse.
-
After down loading the zip file, I try to extract it and I get an error message.
Extracting to "C:\Users\Dad\AppData\Local\Temp\wzeebf\"
Use Path: yes Overlay Files: yes
Warning: skipping "Schedule Creator TRACON 11 RFN.exe". The 32-bit CRC stored in the local header for this file is not the same as the 32-bit CRC stored in the central header
And it won't extract. The new one for tower 2011 opened just fine.
-
I can't unzip schedule creator 15 v3 rfn.exe. When I try I get an error message: warning: skipping "schedule creator 15 v3 rfn.exe". the 32-bit crc stored in the local header for the file is not the same the 32-bit crc stored in the central header. The when I say yes and look at the details I get: extracting to (then a temp location) then user path: yes overlay files: yes. Then I get the warning message I gave at the beginning. Any Ideas what's wrong? I've downloaded several times, but the same problem. I've downloaded and unzipped other zip files with no problems. I'm running win 7 pro 64-bit. I really like the idea of making cargo schedules.
-
I found the problem & that's fixed. I have disabled the controllers in fsx and using FSUIP. I also had a problem with the hat-switch and found a topic where you had told some one to assign it to the axis pan_view. I did that and it works great. The programing each button made it jerky. So for now all my planes are working great. Thanks for the help.
-
I've started using my feelthere 737 again and got everything programed to my Saitek x52 stick and peddles. I have the landing gear assigned to button 4. It works fine. Since not everything in the VC works on the 737 I assigned buttons 8, 9 and 10, 11 to 8 mixture 1 rich, 9 mixture 1 lean, 10 & 11 the same for mixture 2. When I tested out on a flight all was good. However, after parking and pressed button 9 to shut down engine 1, it also toggled the landing gear. When I pressed again the gear lever went back down. I've looked at everything I could look at and can't see why mixture 1 lean causes the landing gear to toggle. The landing gear is assigned to G on button 4. button 9 is P0, c65987,0, which is mixture 1 lean. And that's the only one that does it. I attached the log file.
-
I'm having trouble with fsuipc 4. I have shortaircraftnameok=yes and profiles=yes. However, when I change planes I.E. iFly or PMDG 77, I have to open up fsuipc and do like my buttons and switches and click on profiles. It will either select the plane or I have to pick it from the list. Shouldn't it be automatic that it picks the correct plane?
-
That's probably it. I went to buttons and switches and pushed create mouse macro. In fs9 after I did that I went and selected the keys I needed to and then I had it. I attached the macro so you can see what happened. This is my fs9 one.iFly737.zip
-
I fly fs9 in window mode. So when I made the macro I pressed the iFly on the menu bar, then ground services. That was it, the power and air menu popped up and all I had to do was select power and air. But I can't get the macro button to show up in fsx so I can end the macro. Maybe it has to do with iFly 737s. I could try the default 172 to see if it works with that.
-
About the only thing I was going to use it for was having a macro that when I pushed a button on the flight stick, it would open the ground services in the ifly menu. I did it in fs9, but in fsx the ifly menu is under add-on menu's. So I couldn't use the one for fs9. It's not that big of a deal. I just have to open it with the mouse.
-
I got fsx a couple of weeks ago and purchased fsuipc4 (I have fsuipc3 for fs9). I went to create a mouse macro but the box that should be showing while I did the mouse clicks wasn't there. I thought I saw it flash on the screen for a second then went away. I've done them in fs9. I was making one for my iFly 737 plane and was in the 2d panel. I'm running win7 pro 64 and 8gigs ram. Any ideas.
-
Does this also work in fs9?
-
I know, my feelthere 737s you click just above of the ground power switch the part that lights up when ready, then after a minute or so it comes on and then flip the switch. Or level-D you have the contact ground and request power and air. But, at least this does save time. Better than nothing.
-
I've got the macro to open to the ground window, then all I have to do is click on the ground power and air. Save time using the alt and getting to that screen.
-
I have ifly 737 and to turn on ground power you have to go to the menu and pick ifly then the ifly 737 then ground commands then click on ground power and ground air to make it available. I think I have the first part done. I can have it open up to the part that shows the ground stuff. But how can I have it click on the ground power available and ground air available. Those are just click spots. Any ideas?
-
OK, I've added the gear up/down to the ini file:
[buttons]
ButtonRepeat=20,10
1=P0,7,K90,8
2=P0,6,C65861,0
3=P0,11,C66299,0
4=P0,10,C66298,0
5=P0,1,K73,24
6=P0,5,C66066,0
7=P0,13,K68,9
8=P0,12,K85,9
9=P0,4,K71,8
So what should I do to get the nose gear light to go on/off when I raise/lower the landing gear. I'll check out the other thing about autopilot. Too bad you can't specify a particular model of a plane instead of a specific plane, ie level-d winglet model instead of ual level-d winglet. That would save having to open up each aircraft and appling the assignment you want.
-
Here is the section from the ini file:
[JoyNames]
AutoAssignLetters=No
0=Saitek X52 Flight Controller
0.GUID={14FC7E10-128B-11DF-8001-444553540000}
1=Saitek Pro Flight Rudder Pedals
1.GUID={588A8F90-3108-11E0-8001-444553540000}
[buttons]
ButtonRepeat=20,10
1=P0,7,K90,8
2=P0,6,C65861,0
3=P0,11,C66299,0
4=P0,10,C66298,0
5=P0,1,K73,24
6=P0,5,C66066,0
7=P0,13,K68,9
8=P0,12,K85,9
I've also been trying to figure out how to disenguage the autopilot with buttons. Most of the planes I fly are ie ifly, level-D, pmdg. Z doesn't work with these type of aircraft. I just need to toggle the disenguage bar.
-
I have my landing gear set to my button 2, push gear up push again gear down. Can I have it so that when I'm on approach when I have the gear down that the nose landing light comes on?
-
I have the registered version of fsuipc 3.98 for fs9.1. My ifly 737's to connect the ground power and air I have to to alt then click on the ifly tab on the tool bar then the ifly 737 then click on connect ground power the ground air. I would like to have a key combo that would do all that. Then I could just click on the overhead to activate the ground. Can this be done with fsuipc?
-
I had autobrake working through fsuipc using the home key for increase and end key for decrease. Then I had my saitek x52's t3 hooked to home and t4 to end. Then I realised that that was also the 7 & 1 on the keypad with numlock off. I then changed them to ctl I and ctl D. But now I can use t4 to decrease but t3 won't increase pass disarm. I had it working but now it doesn't. even if I use the mouse. It's that way on all of my pss 757 and T7. And I do have the registered fsuipc. Here is what is in my ini file.
[General]
History=OUAXHYJM7HXSC64JOJCWP
WindSmoothing=Yes
AutoTaxiWind=No
WhiteMessages=No
ThrottleSyncAll=No
GraduatedVisibility=No
LowerVisAltitude=0
UpperVisAltitude=25000
UpperVisibility=6000
GenerateCirrus=Yes
WindShearSharp=No
UpperWindGusts=No
ExtendMetarMaxVis=Yes
DisconnTrimForAP=No
ZeroElevForAPAlt=No
AutoClearWeather=Yes
ExtendTopWind=Yes
WindSmoothness=5
SmoothPressure=Yes
PressureSmoothness=1
SmoothVisibility=No
VisibilitySmoothness=2
MaxSurfaceWind=0
WindLimitLevel=0
WindDiscardLevel=0
WindAjustAltitude=No
WindAjustAltitudeBy=2000
MinimumVisibility=0
MaximumVisibilityFewClouds=0
MaximumVisibility=0
MaximumVisibilityOvercast=0
MaximumVisibilityRainy=0
OneCloudLayer=No
ThinClouds=No
ThinThunderClouds=No
CloudThinness=0
ThunderCloudThinness=10000
CloudTurbulence=No
CloudIcing=Yes
WindTurbulence=No
SuppressAllGusts=No
ExternalOptionControl=Yes
AutoTuneADF=No
KeepFS98CloudCover=No
ShowPMcontrols=No
MagicBattery=40
RudderSpikeRemoval=Yes
ElevatorSpikeRemoval=Yes
AileronSpikeRemoval=Yes
ReversedElevatorTrim=No
TrapUserInterrupt=Yes
NavFreq50KHz=No
ClockSync=No
SmoothIAS=Yes
SetVisUpperAlt=No
VisUpperAltLimit=0
MaxIce=3
WindSmoothingDelay=0
WindSmoothAirborneOnly=Yes
VisSmoothingDelay=0
VisSmoothAirborneOnly=No
SuppressCloudTurbulence=No
SuppressWindTurbulence=No
SpoilerIncrement=512
ShortAircraftNameOk=No
TCASid=Flight
TCASrange=40
TrafficScanPerFrame=10
AxisCalibration=No
CentredDialogue=Yes
ClearWeatherDynamics=Yes
OwnWeatherChanges=No
FixWindows=No
FixControlAccel=Yes
WeatherReadInterval=4
MoveBGLvariables=Yes
TimeForSelect=4
MainMenu=&Modules
SubMenu=&FSUIPC ...
PropTaxiWind=No
TimeSetMode=Partial
WeatherReadsFast=No
MinIce=0
TrafficControlDirect=Yes
LimitWindVariance=No
StopAutoFuel=Yes
ShowMultilineWindow=Yes
SuppressSingleline=Yes
SuppressMultilineFS=No
CorrectVSsign=Yes
MouseWheelTrim=No
MouseWheelTrimSpeed=1
AxisInterceptIfDirect=No
ZapSound=firework
UseProfiles=No
UpdatedByVersion=3980
BrakeReleaseThreshold=75
DontResetAxes=No
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
[JoystickCalibration]
SepRevsJetsOnly=No
FlapsSetControl=0
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=0
RudderTrimControl=0
CowlFlaps1Control=0
CowlFlaps2Control=0
CowlFlaps3Control=0
CowlFlaps4Control=0
Aileron=-16257,-512,512,16336
Elevator=-16204,0,0,16272
ApplyHeloTrim=No
FlapDetents=No
MaxSteerSpeed=60
SlopeElevator=5
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
AllowSuppressForPFCquad=Yes
Rudder=-16380,-512,512,16380
Throttle=-16384,16383
Reverser=-16380,16380/18
UseAxisControlsForNRZ=No
[Keys]
14=N96,8,66506,125
21=80,26,66506,10005
28=N73,10,66298,0
26=N68,10,66299,0
[MacroFiles]
1=737 OHD
2=767
3=APchart
[JoyNames]
AutoAssignLetters=No
0=Saitek X52 Flight Controller
0.GUID={14FC7E10-128B-11DF-8001-444553540000}
[buttons]
ButtonRepeat=20,10
1=P0,7,K222,8
2=P0,6,K90,8
3=H0,10,K73,10
4=H0,11,K68,10
[Axes]
0=0U,128,D,25,0,0,0
I don't know why it didn't work this time.
-
It works and yes it's the ident number. I don't know why it wasn't working earlier, but they are now. Thanks.
-
I'm trying to have my FsMeteo display open when I press a key. Here's what it looks like in one of my panels:
[window14]
file=d:\fsmeteo\767fsmwd.bmp
size_mm=395,448
windowsize_ratio=1
position=0
visible=0
ident=125
gauge00=767fsmwd, 0, 0,390
I tried using the panel ID toggle or even open, but it didn't work. I put in the parameter 125 since that is the id of my fsmeteo display window. Is there away to do it? I have a toggle button in my 2d panels, but need a key combo to have it open in vc mode, since most of my panels use up 1-9.
-
I'm having the same problem. I have the registered version. My saitek cybor gold stick went out and I got the saitek st290 pro. Now when I start fs9 and select a plane I have to go in and recalibrate. If I don't and I start moving the throttle the engines rev up fast and the rudder moves too quickly. Once I calibrate the throttle is smooth and so is the rudder. I also do the elevators and airones while I'm at it.
-
Found the problem. Got it fixed. Just put the fixed AFCAD file on Avsim and sent one to John at simflyers. Sorry.
-
I added the new runway for simflyers to the AFCAD with the ils's and correct frequencies. The AIs use it with no problem, but the atc won't let me select it. It was having me land on 36L visual and my only other choices were 36R, 35 and 17. Now I selected 35, so it told me 36L side step 35L. Now it new I had changed the old 17/35 to 17R/35L but when requesting another runway it just had 17 or 35 no L/R. Is there a file that needs to be updated so atc will let you pick new runways? Cause for AI it does know 35R or 35L.
Did a test. When I was west of KMCO it told me to fly downwind to 17L which is the new rwy. But it never gave me clearance to land. The other rwys would clear me to land after I went passed the end of the rwy. Also, when I looked at the nav section in AFCAD it still had 17/35 and I couldn't change them to 17R/35L, nor would it let me delete them cause they are stock ils's. Any help?
assinging buttons to taxi/landing lights MJC dash 8 Q400
in FSUIPC Support Pete Dowson Modules
Posted
I have the MJC Dash 8 Q400 pro. Landing lights nor taxi lights come on when I push the buttons. I only use VC and the switches don't move and in spot view, no lights come either. I'm running FSX-SE on windows 10 64-bit with 16gig ram.