[Axis Calibration not recognizing Axis Assignment]

But look at the assignment you made:

 

1=0Y,B,0,0,65762,0

 

That is most certainly NOT an assignment made on the left hand side of the Axes tab! It is an assignment on the right-hand side, in the "range" setting options, and with the range still left at 0-0. The "B" means "in both directions" (it could be a U for Up or D for Down only). But with no real range (0-0 isn't much room!), nothing can happen.

 

Why are you still persisting in using a part of the assignments tab which has very specialised applications none of which you need? PLEASE please please read the user guide and do what I said, only assign axes on the left side of the tab -- the place where you can make up to 4 assignments.

 

I 'm not going to keep repeating mysef like this. I've never known anyone to be so persistent in not doing what is advised. 

 

If you cannot distinguish between left and right I suggest you simply assign your axes in FSX. You can still calibrate in FSUIPC if you wish. The assignments facilities in FSUIPC are more extensive but they aren't necessary for calibration.

 

Pete

 

 

I am such an idiot.  I worked on this all day yesterday, read the manual many times, and still kept using the drop downs on the right.  No wonder the assigments did not show up on the calibration page.

 

I apologize for my stupid mistake.  Thank you very much for your time. :oops: :oops:

[Axis Calibration not recognizing Axis Assignment]

In other words after setting for example any axis, ie, X, Y, or Z (ailerons, elevator, throttle), when I go to the Calibration tab, it states that none have been processed. When I move the yoke or throttle, the IN and OUT boxes don't change and remain at zero.

 

Can you help me resolve this?

[Axis Calibration not recognizing Axis Assignment]

but how could you "set elevator axis" if, as you say, FSUIPC doesn't detect any axes? 

 

The strange range assignment you've set is for the control "Elevator Set". Why? That's a most unusual control to choose -- the regular one is Axis elevator set, or better normally to assign direct to FSUIPC calibration. And in ay case, your assignment won't work because you've said only to send the Elevator Set control when the axis value goes from 0 to 0!

 

I think you sre trying to do things you don't understand. Why not use the normal easy assignments? Even better, why not actually try reading at least some of the FSUIPC user guide? That's there to help you, you know!

 

Pete

I made a mistake by using Elevator Set instead of Axis Elevator Set. 

 

However, even when I delete the fsuipc.ini, restart fsx, set the Axis for the Elevator to Axis Elevator Set, Send Direct to FSUIPC Calibration, and then go to Joystick Calibration, nothing happens on the elevator portion of the page when I move the elevator. It is if the Axis Assignment is not taking.

I really appreciate your help. I have read the manual carefully and I am pretty sure I followed all of the calibration procedures.  I just can't figure out what is going wrong.

Here is the new fsuipc.ini

[General]

UpdatedByVersion=4937

History=BYF18X1UQ9G8OINEOF9UE

InitDelayDevicesToo=No

NewInterceptTextMenu=No

UseSystemTime=No

UseMidMouseBtn=Yes

MouseWheelMove=No

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

DeleteVehiclesForAES=Yes

AutoScanDevices=Yes

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-1

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=Substring

UseProfiles=Yes

EnableMouseLook=No

DelayedMouseLookZoom=No

AxesWrongRange=No

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

InitDelay=0

GetNearestAirports=Yes

OOMcheck=Yes

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

LuaRerunDelay=66

FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0

SimConnectUsed=10.0.61259.0

[JoyNames]

AutoAssignLetters=No

0=Saitek Pro Flight Cessna Yoke

0.GUID={9C4F3DE0-D14E-11E3-8003-444553540000}

1=Saitek Pro Flight Cessna Rudder Pedals

1.GUID={9C7B56F0-D14E-11E3-800A-444553540000}

[Axes]

PollInterval=10

RangeRepeatRate=10

1=0Y,B,0,0,65762,0

[buttons]

PollInterval=25

ButtonRepeat=20,10

[MacroFiles]

1=iFly737

2=leveld767

[LuaFiles]

1=ipcReady

2=linda

[AutoSave]

Next=1

Interval=60

Files=10

SaveOnGround=No

AutoSaveEnabled=No

[GPSout]

GPSoutEnabled=No

[GPSout2]

GPSoutEnabled=No

[WideServer]

WideFSenabled=Yes

AdvertiseService=1

Port=8002

Port2=9002

[sounds]

Path=C:\FSX\Sound\

Device1=Primary Sound Driver

Device2=Realtek Digital Output(Optical) (2- Realtek High Definition Audio)

Device3=DELL U2414H-8 (NVIDIA High Definition Audio)

Device4=DELL U2414H-0 (NVIDIA High Definition Audio)

Device5=Realtek Digital Output (2- Realtek High Definition Audio)

Device6=DELL U2414H-C (NVIDIA High Definition Audio)

[Window.LUA display]

Docked=7357, 2986, 3513, 2418

[JoystickCalibration]

AllowSuppressForPFCquad=Yes

ExcludeThrottleSet=Yes

ExcludeMixtureSet=Yes

ExcludePropPitchSet=Yes

SepRevsJetsOnly=No

ApplyHeloTrim=No

UseAxisControlsForNRZ=No

FlapsSetControl=0

FlapDetents=No

ReverserControl=66292

Reverser1Control=66422

Reverser2Control=66425

Reverser3Control=66428

Reverser4Control=66431

MaxThrottleForReverser=256

AileronTrimControl=66731

RudderTrimControl=66732

CowlFlaps1Control=66162

CowlFlaps2Control=66163

CowlFlaps3Control=66164

CowlFlaps4Control=66165

SteeringTillerControl=0

MaxSteerSpeed=60

Elevator=0,0,0,0

I am sorry to bother you, but I am stumped.

 

[Axis Calibration not recognizing Axis Assignment]

Here is my fsuipc.ini file in case that helps.  This was done after deleting fsuipc.ini, start fsx, make sure fs control not enabled, start fsuipc, set elevator axis, go into calibration tab where nothing happens when I move elevator.

 

[General]
UpdatedByVersion=4937
History=6M4PXLPJEXCLD7C3D4YJO
InitDelayDevicesToo=No
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-1
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=Yes
OOMcheck=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
LuaRerunDelay=66
FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0
SimConnectUsed=10.0.61259.0
[JoyNames]
AutoAssignLetters=No
0=Saitek Pro Flight Cessna Yoke
0.GUID={9C4F3DE0-D14E-11E3-8003-444553540000}
1=Saitek Pro Flight Cessna Rudder Pedals
1.GUID={9C7B56F0-D14E-11E3-800A-444553540000}
[Axes]
PollInterval=10
RangeRepeatRate=10
0=0Y,32
1=0Y,B,0,0,65694,0
[buttons]
PollInterval=25
ButtonRepeat=20,10
[MacroFiles]
1=iFly737
2=leveld767
[LuaFiles]
1=ipcReady
2=linda
[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No
[GPSout]
GPSoutEnabled=No
[GPSout2]
GPSoutEnabled=No
[WideServer]
WideFSenabled=Yes
AdvertiseService=1
Port=8002
Port2=9002
[sounds]
Path=C:\FSX\Sound\
Device1=Primary Sound Driver
Device2=Realtek Digital Output(Optical) (2- Realtek High Definition Audio)
Device3=DELL U2414H-8 (NVIDIA High Definition Audio)
Device4=DELL U2414H-0 (NVIDIA High Definition Audio)
Device5=Realtek Digital Output (2- Realtek High Definition Audio)
Device6=DELL U2414H-C (NVIDIA High Definition Audio)
[Window.LUA display]
Docked=7357, 2986, 3513, 2418
[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
Aileron=0,0,0,0

 

I am very frustrated with this.  Any help would be much appreciated.

 

Thanks
 

[Axis Calibration not recognizing Axis Assignment]

I have diabled my Cessna Yoke and Rudder pedals in FSX. I can't assign Yoke, Rudder, Throtte with FSUIPC as Axis Calibration simply does not recognize my Axis Assignments.

 

I have tried deleting the FSUIPC ini file.....no change

 

I am stumped.  I am using v4.937 registered.

 

What am I doing wrong?

[WideFS only Working Intermittently]

Attached are my log files.  The subject says it all.

 

Have I done something wrong?  Do I need to switch to Simconnect?

 

Many thanks for any help

FSUIPC4.zip