remcosol

Thank you for the reply! Both pc,s firewalls are disabled, I have been searching for the w11 upgrade issues but probably copied someones false info so i will check the servername location to make sure. The wideserver section is indeed in the fsuipc.ini file, my typo! Ill try again tomorrow to see if it makes a difference. Kind regards, Remco

Hello! At the moment i am having issues trying to connect a w11 laptop to my sim pc, w10! The issue is that my laptop with w11 will not connect wideclient to the wideserver. The W11 version is W11 pro , 24H2. FSUIPC v6, 6.22, widefs7 on all. As soon as i plug my old w10 laptop into the network to the w10 pc it works instantly. So it has to do with my new w11 laptop. What i have done is: 1. made sure it is the same wourkgroup ( pc see each other as well ) 2. disabled the firewall ( eventhough it had an exemption for wideclient etc) 3. made sure it had the correct comm ports enabled on both pc's In the wideserver.ini i put the following as extras: BroadcastMode=Yes ProtocolPreferred=TCP ServerName=(pc name) as extras and in the client.ini Protocol=TCP as extra ( on top of the other things) It still seems like a firewall issue to me although the firewall is disabled. Any thoughts? Kind regards, Remco

Hello Pete, It seems that , after 2 years, the problem is solved. I have put the rudder trim as: send to fs as normal axis , in stead of: send direct to fsuipc calibration. This seems to have resolved the conflict .... i dont know why but it has not crashed again since ( after many!!!!!! hours) Thank you for your time and help! Best regards, Remco

I will go and check ! thank you ! My time is running out for today, I will test as soon as i can. Best regards, Remco

it only shows up as axis rudder set

The reason why i am saying this is because the elevator trim does show up , the rudder trim doesnt.. 439922 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -960 (0xfffffc40) AXIS_ELEV_TRIM_SET 439953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1280 (0xfffffb00) AXIS_ELEVATOR_SET 439968 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -864 (0xfffffca0) AXIS_ELEV_TRIM_SET 440000 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -832 (0xfffffcc0) AXIS_ELEV_TRIM_SET 440015 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -768 (0xfffffd00) AXIS_ELEV_TRIM_SET 440047 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -736 (0xfffffd20) AXIS_ELEV_TRIM_SET 440062 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -672 (0xfffffd60) AXIS_ELEV_TRIM_SET 440078 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -640 (0xfffffd80) AXIS_ELEV_TRIM_SET 440078 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -875 (0xfffffc95) AXIS_ELEVATOR_SET 440093 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -576 (0xfffffdc0) AXIS_ELEV_TRIM_SET 440359 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -544 (0xfffffde0) AXIS_ELEV_TRIM_SET 440375 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -512 (0xfffffe00) AXIS_ELEV_TRIM_SET 440453 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -448 (0xfffffe40) AXIS_ELEV_TRIM_SET 440468 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -352 (0xfffffea0) AXIS_ELEV_TRIM_SET 440500 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -320 (0xfffffec0) AXIS_ELEV_TRIM_SET 440609 *** AXIS: Cntrl= 65764 (0x000100e4), Param= 111 (0x0000006f) AXIS_RUDDER_SET 440672 *** AXIS: Cntrl= 65764 (0x000100e4), Param= 222 (0x000000de) AXIS_RUDDER_SET 440859 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -352 (0xfffffea0) AXIS_ELEV_TRIM_SET 440906 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -384 (0xfffffe80) AXIS_ELEV_TRIM_SET 440922 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -416 (0xfffffe60) AXIS_ELEV_TRIM_SET 441109 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -448 (0xfffffe40) AXIS_ELEV_TRIM_SET 441140 *** AXIS: Cntrl= 65766 (0x000100e6), Param= -512 (0xfffffe00) AXIS_ELEV_TRIM_SET 441625 *** AXIS: Cntrl= 65698 (0x000100a2), Param= 225 (0x000000e1) FLAPS_SET 441625 *** AXIS: Cntrl= 65698 (0x000100a2), Param= 193 (0x000000c1) FLAPS_SET 441984 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 256 (0x00000100) AXIS_AILERONS_SET 442297 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1145 (0xfffffb87) AXIS_ELEVATOR_SET 442406 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET 442453 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1699 (0xfffff95d) AXIS_ELEVATOR_SET 442547 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1969 (0xfffff84f) AXIS_ELEVATOR_SET 442593 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -2253 (0xfffff733) AXIS_ELEVATOR_SET 442656 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -2793 (0xfffff517) AXIS_ELEVATOR_SET 442828 *** AXIS: Cntrl= 65698 (0x000100a2), Param= 225 (0x000000e1) FLAPS_SET 442875 *** AXIS: Cntrl= 65698 (0x000100a2), Param= 193 (0x000000c1) FLAPS_SET 443078 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -2658 (0xfffff59e) AXIS_ELEVATOR_SET 443187 *** AXIS: Cntrl= 65698 (0x000100a2), Param= 225 (0x000000e1) FLAPS_SET 443234 *** AXIS: Cntrl= 65698 (0x000100a2), Param= 193 (0x000000c1) FLAPS_SET 443390 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -2388 (0xfffff6ac) AXIS_ELEVATOR_SET

Is it in theorie possible that both the rudder and rudder trim use 3ABC? I have not assigned anything to that as far as i know.....

Just to give you a small impression

Thank you Pete, For me fsuipc runs my whole simulator , withe real instruments ( some from real world sims, others from real aircraft) . And also the flightcontrols and buttons lights etc. For this i use: Flightillusion for most buttons and lights and elevator , rudder, aileron, throttles and prop speed. Open cockpits SIOC for all the instruments And the siatek elevator trim for the elevator trim, USB AXIS for the rudder trim, cowlflaps and some buttons, The other card is for buttons alone. It runs great and faultless, unless i use the rudder trim for some reason..... I'll do some more digging

And the last question is: Do i set the settings of the axis in fsuipc to: direct to fsuipc calibration or send to fs as normal axis, and what is the difference? Thank you for your help! Best regards, Remco

I am just wondering, do all the trim offsets (elevator etc) end up in the control offset , i.e 3BC2 13 Rudder trim into 3BAC 2 Rudder , or are they "real " offsets on their own?

Hi Pete , i added the whole log ? the last part was 2096094 WRITEex 0378, 2 bytes: 01 00 .. 2096094 WRITEex 0BDC, 4 bytes: 20 00 00 00 ... 2096140 WRITEex 3BAC, 2 bytes: 93 FF .. 2096187 WRITEex 0C4E, 2 bytes: 96 00 .. 2096187 WRITEex 3BAC, 2 bytes: 26 FF &. 2096187 WRITEex 0BDC, 4 bytes: 40 00 00 00 @... 2096250 WRITEex 0378, 2 bytes: 01 00 .. This was all there is, as said i have scanned through it all but did not com across a rudder trim set offset.... eventhough it should be configured correctly...,

This Is my ini file: [JoyNames] AutoAssignLetters=No 2=Saitek Pro Flight Cessna Trim Wheel 2.GUID={CFC64FF0-6E1F-11E5-8005-444553540000} [Axes] PollInterval=10 RangeRepeatRate=10 0=0X,R1,D,30,0,0,0 -{ DIRECT: CowlFlaps2 }- 1=0Y,R1,D,29,0,0,0 -{ DIRECT: CowlFlaps1 }- 2=0Z,R1,D,28,0,0,0 -{ DIRECT: Rudder Trim }- 3=2X,R1,D,21,0,0,0 -{ DIRECT: ElevatorTrim }- 4=16X,R2,D,1,0,0,0,R3 -{ DIRECT: Aileron }- 5=16Y,R2,D,2,0,0,0,R4 -{ DIRECT: Elevator }- 6=16R,R1,D,3,0,0,0,R3 -{ DIRECT: Rudder }- [Buttons] PollInterval=25 ButtonRepeat=20,10 1=P0,2,C65955,1 -{FUEL_SELECTOR_OFF}- 2=P0,3,C65958,1 -{FUEL_SELECTOR_RIGHT}- 3=P0,4,C65957,1 -{FUEL_SELECTOR_LEFT}- 4=P0,22,C66518,1 -{FUEL_SELECTOR_2_LEFT}- 5=P0,23,C66519,1 -{FUEL_SELECTOR_2_RIGHT}- 6=P0,21,C66516,1 -{FUEL_SELECTOR_2_OFF}- 7=P1,7,C65842,1 -{RADIO_VOR1_IDENT_TOGGLE}- 8=U1,7,C65842,0 -{RADIO_VOR1_IDENT_TOGGLE}- 9=P1,6,C65843,1 -{RADIO_VOR2_IDENT_TOGGLE}- 10=U1,6,C65843,0 -{RADIO_VOR2_IDENT_TOGGLE}- 11=P1,5,C65846,1 -{RADIO_ADF_IDENT_TOGGLE}- 12=U1,5,C65846,0 -{RADIO_ADF_IDENT_TOGGLE}- 13=P1,0,C66463,1 -{COM1_TRANSMIT_SELECT}- 14=U1,0,C66463,0 -{COM1_TRANSMIT_SELECT}- 15=P1,2,C1124,1 -{com1/2 tx switch}- 16=U1,2,C1124,0 -{com1/2 tx switch}- 17=P1,3,C66477,1 -{MARKER_SOUND_TOGGLE}- 18=U1,3,C66477,0 -{MARKER_SOUND_TOGGLE}-

FSUIPC4.ini

FSUIPC4.log