Kremi54
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Kremi54
-
-
Hi Pete,
thanks for your reply, I will try your options as soon as I am back at the cockpit, I am out for a few days.
I'll keep you informed.
Regards,
Koos
-
MOVED FROM FAQ SUBFORUM!
Please ALWAYS post Support Questions to the Support Forum!Hello Pete,
How can I use a button assigned to offset 0x0374,(NAV1/NAV2 used in Garmin G1000), in FSUIPC?
I'm using Leo Bodnar's BBI-32 button box to control the Garmin G1000 on the Skylane T182T, it works very well with assigning buttons via FSUIPC but I cannot send this offset 0374 to select Nav1 or Nav2 to FSX.
do you know a way to do that or do I need another approach ?
Thanks in advance,
Koos, the Netherlands
-
Hello,
I assigned the GPS "CLR"-button via FSUICP to GPS-CLR function, works okay, but the "CLR" button also has an extra function when pressed longer.
That function should be to go to the home screen, but I have no idea how to set that fuction to the up to the "CLR"=button.
Anyone has an idea how to do that ?
Regards,
Koos
-
Hello Pete,
Thanks for your help.. First let me describe the hardware i will be using for the trimotor.
I use FSX + Prosim737 and a Opencockpits DC- motor card controlled via Sioc. It is just a basic test to eventualy building a motorized trimwheel.
I found in the FSUIPC Reference manual an offset that I think that it is just what I need to control the DC-motorcard, namely:
the offset $3370, so I would like to use the value of byte $337, 0, 1 or 2 , in a Sioc script to use those values to control my motor.
The main question is , can I use the following declaration to get the value of offset $3370 in Var21 so I can convert Var21 into values I need to control my DC-motor card?
If I use the following script:
Var 21 name Trimwheel link Fsuipc_in offset $3370 length 4
Will the Var21 be filled wth contents from $3370 ?
If so, than I can use it, but when I tested it, nothing is filled in Var21.
Regards,
Koos
-
Hello Pete,
I need some help with the following issue.
In the FSUIPC Programmers Reference manual I found the following description about the elevator trim motor.
<< Offset $3370 length 4 >>
Four single byte PFC driver ?alive counters:
3370 = COM port read thread alive and running
3371 = Elevator trim motor action (0=off, 1=up, 2=dn) <<== I need this value to start and stop my trimmotor
3372 = COM port write thread alive
3373 = Main FS chain aliveso i wrote a small sioc script as follows:
==========================================================================================
Var 20 name Motor_1 Link USB_DCMOTOR Output 1 // DC motor variable control
Var 21 name TRIMWHEEl Link FSUIPC_IN Offset $3371 Length 4 // get TRIMWHEEL value from $3371 = Elevator trim motor action (0=off, 1=up, 2=dn)
{
&Motor_1 = &TRIMWHEEL // the motor change stops ans starts depending on &TRIMWHEEL
}
===========================================================================================
saved this file in the SIOC-config and started FSX, SIOC and Prosim completely,
but in flight I did not get any input in &TRIMWHEEL, checked in IOCPConsole from SIOC. I know I have to mask out bits, but thecontents of the &TRIMWHEEL is not filled, it stays zero.
Can you expalin to me what I do wrong ??
Do I need to load some extra .dll's ? I'm running SIOC version 4.01, have a full FSUIPC license and for the flight sim I run Prosim737, (licensed)
Regards,
Koos Remigius, The Netherlands
NAV1/NAV2 select in Garmin G1000
in FSUIPC Support Pete Dowson Modules
Posted
Hi Pete,
I tried to use FSUIPC Event logging to capture the command, however when I push the NAV-selector nothing is logged, other buttons are logged okay, so I think I am missing something, and I have no idea what.
So I will search the internet for an answer.
Thanks for uour help.
Regards,
Koos