birdguy

Mr. Dowson, I am only telling you what happened. You can call it palavah if you want. I do not lie. Why would I went I am only trying to get help? Both attempts were NOT the same. On the first attempt BOTH FSUIPC4 and Kodiak KEYs were active. Kodiak would not register. On the second attempt I disabled the FSUIPC4 KEY and that time Kodiak did register. On the third time, after I re-enabled the FSUIPC key, they were both registered. Probably because the FSUIPC4 log was already registered. I do not take kindly to the inference I lied. I came here for assistance and I appreciate your help. I understand how it works a bit better now. But if I have more problems I hesitate to come back here and get berated because my system might work differently. Noel

I solved the problem. I was in error about the Kodiak key beng deleted. It had been moved to the top of the Modules folder but changed to FSUIPC4,Kodiak.key (a comma after FSUIPC4). What I did next was change the comma to a period so I had FSUIPC4.Kodiak.key. Then I ran it again and the same thing happened and I had an unregistered version on my Kodiak installation. This time I commented out FSUIPC4.key and restored FSUIPC4.Kodiak.key so it was the only entry in the Modules folder with a key. That worked. Now my Kodiak has a registered version. Next I uncommented FSUIPC4.key and ran the start-up screen version. I selected a free flight flight and when it came up it had a registered version. I reran Kodiak and it still had a registered version. Now that I know how to do it I can get all my stand alone aircraft registered. Thanks for you help Luke and Pete. I wish I knew more bout how this stuff worked but at 84 year old my learning curve has gotten steeper. Noel

I tried that Luke but it doesn't work. The first time I just made a copy of the key file and named it FSUIPC4.Kodiak.Key and started it up. The Kodiak still said it was unregistered. I shut it down and looked at the Modules folder and the Kodiak key had been deleted. Then I tried a different tack. I again made a copy of the key file and renamed it FSUIPC4.Kodiak.key. Then I deleted the Kodiak ini and log files hoping that when started it again it would rewrite the ini and log files. It did rewrite the ini and log files but again remained unregistered and deleted the Kodiak key file. But thanks for trying to help. One of the problems is that I have about 50 such startups on my desktop. Not all different aircraft but some are the same aircraft with different starting locations, times, and weather. And I plan to add more as time goes on. I can live with an unregistered version of FSUICP4. Noel

OK Pete, I understand. I start my simulator in an unconventional manner. I bypass the opening screen. I have several favorite planes in startup scenarios at different airports in parking spaces with a desktop icon for each scenario. I make a copy FSX.exe and rename it with the scenario name, hence I have a Kodiak scenario for when I want to fly the Kodiak. I've been using this method since the days of FS2002. I guess I would rather retain my regular method of starting flights and forego having FSUIPC4 registered. But thanks for the help. Noel

Pete, I don't have a FSUIPC5.LOG. And I no longer have P3D installed on my system. Only FSX_se in the cam folder you mention in your reply. My Modules Folder contains the following: FSUIPC Documents Folder AeroCore.dll FSUIPC4 Install Log FSUIPC4.DLL FSUIPC4.key FSUIPC4.Kodiak.ini FSUIPC4.Kodiak.log I started up with the Quest Kodiak. Here is the installation log from the Modules Folder followed by the Kodiak log Installer for FSUIPC4.DLL version 4.974 Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" ... >>> OK! FOUND FSX! <<< ... SetupPath=D:\Steam\steamapps\common\FSX\ Looking in registry for FSX-SE install path: HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX Parameter"Install_Path" ... >>> OK! FOUND FSX-SE! <<< ... SetupPath=D:\Steam\steamapps\common\FSX ************ BUT this is the same path as for FSX! Will only install for FSX-SE ************ Looking in registry for Prepar3D v1 install path: HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v2 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v3 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"AppPath" ... NOT found! ... =========================================================== INSTALLATION FOR FSX-SE: SetupPath="D:\Steam\steamapps\common\FSX\" Checking version of the FSX-SE EXE: ... Version 10.0.62615.0 (Need at least 10.0.62607.0) Checking compatibility with installed SimConnect: Found SimConnect build 60905 (Original) Found SimConnect build 62615 (Steam) Found SimConnect build 61242 (SP1 May07) Found SimConnect build 61259 (Acc/SP2 Oct07) Checking if there's already a version of FSUIPC4 installed in: D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL ... No previous valid version found. FSX-SE Modules folder already exists. Okay -- installed FSUIPC4 into "D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX-SE\FSX_SE.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\birdg\AppData\Roaming" Found FSX_SE.CFG in "C:\Users\birdg\AppData\Roaming\Microsoft\FSX-SE\FSX_SE.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. (for FSUIPC4, without Loader) ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Default\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX_SE.CFG there Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\birdg\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX.CFG there Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX\FSX_SE.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\birdg\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX_SE.CFG there "Modules\FSUIPC Documents" folder created okay! Now installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "The 2016 List of FSX and P3D Controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "Offset Mapping for PMDG 777X.pdf" okay Installed "Offset Mapping for PMDG 747QOTSII.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay Installed "Profiles in Separate Files.pdf" okay Installed "FSUIPC4_Loader.dll" okay =========================================================== All installer tasks completed. Registration dialog exit: selected FSUIPC REGISTER Providing FSUIPC registration dialogue ... Registration for FSUIPC4 was successful! (result code 00) *************** End of Install Log *************** FSUIPC4.Kodiak.log ********* FSUIPC4, Version 4.974 (24th February 2018) by Pete Dowson ********* Windows 10 Pro 64 Bit reported as Build 16299, Release ID: 1709 (OS 10.0) Kodiak.exe version = 10.0.62615.0 Running inside FSX Steam Edition on Windows 10 ... ESP has been renamed as "Kodiak" Module base=52760000 User Name="" User Addr="" FSUIPC4 not user registered WIDEFS7 not user registered, or expired 0 System time = 07/04/2018 16:08:00 0 FLT path = "C:\Users\birdg\Documents\Flight Simulator X - Steam Edition Files\" 0 ------ Module Version Check ------ 0 acontain.dll: 10.0.62615.0 0 api.dll: 10.0.62615.0 0 controls.dll: 10.0.62615.0 0 fs-traffic.dll: 10.0.62615.0 0 G3D.dll: 10.0.62615.0 16 language.dll: 10.0.62615.0 16 sim1.dll: 10.0.62615.0 16 visualfx.dll: 10.0.62615.0 16 weather.dll: 10.0.62615.0 16 window.dll: 10.0.62615.0 16 ---------------------------------- 32 Trying to connect to SimConnect Steam ... 47 FS path = "D:\Steam\steamapps\common\FSX\" 141 LogOptions=00000000 00000001 141 ------------------------------------------------------------------- 141 ------ Setting the hooks and direct calls into the simulator ------ 141 --- CONTROLS timer memory location obtained ok 141 --- SIM1 Frictions access gained 141 --- FS Controls Table located ok 141 --- Installed Mouse Macro hooks ok. 141 --- Wind smoothing fix is fully installed 141 --- SimConnect intercept for texts and menus option is off 141 --- All links checked okay 141 ------------------------------------------------------------------- 141 SimConnect_Open succeeded: waiting to check version okay 141 Trying to use SimConnect Steam 141 Opened separate AI Traffic client okay 8235 Running in "Microsoft Flight Simulator X", Version: 10.0.62615.0 (SimConnect: 10.0.62615.0) 8235 Initialising SimConnect data requests now 8235 FSUIPC Menu entry added 8250 C:\Users\birdg\Documents\Flight Simulator X - Steam Edition Files\ZZZ_Kodiak.FLT 8250 D:\Steam\steamapps\common\FSX\SimObjects\Airplanes\Kodiak\Kodiak.air 12641 User Aircraft ID 1 supplied, now being used 12641 Aircraft loaded: running normally now ... 209719 System time = 07/04/2018 16:11:29, Simulator time = 10:02:44 (17:02Z) 212657 Starting everything now ... 213813 Advanced Weather Interface Enabled 238938 Sim stopped: average frame rate for last 28 secs = 40.9 fps 238938 Max AI traffic was 1000 aircraft (Deleted 0) 253172 === Closing session: waiting for DLLStop to be called ... 263407 === DLLStop called ... 263407 === Closing external processes we started ... 264422 === About to kill any Lua plug-ins still running ... 265594 === About to kill my timers ... 265594 === Restoring window procs ... 265594 === Unloading libraries ... 265594 === stopping other threads ... 265594 === ... Memory checking ... 265594 === ... Button scanning ... 265703 === ... Axis scanning ... 265813 === Releasing joystick devices ... 265813 === Freeing macro memory 265813 === Removing any offset overrides 265813 === Clearing any displays left 265813 === NOTE: not calling SimConnect_Close ... 265813 === AI slots deleted! 265813 === Freeing button memory ... 265813 === Closing my Windows ... 265813 === Freeing FS libraries ... 266828 === Closing devices ... 266828 === Closing the Log ... Bye Bye! ... 266828 System time = 07/04/2018 16:12:26, Simulator time = 10:03:17 (17:03Z) 266828 *** FSUIPC log file being closed Minimum frame rate was 37.8 fps, Maximum was 42.3 fps Minimum available memory recorded was 1853Mb Average frame rate for running time of 33 secs = 40.4 fps Maximum AI traffic for session was 1000 aircraft Memory managed: 18 Allocs, 18 Freed ********* FSUIPC Log file closed ***********

I thought I had Thomas. But just in case I deleted all the FSUIPC stiff from the module and installed it again as administrator. Still no go. While the nstallation log say's I'm registered and it seems to take when I register it when I'm the simulator it tells me it's an unregistered version. Here's the last installation log. Installer for FSUIPC4.DLL version 4.974 Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" ... >>> OK! FOUND FSX! <<< ... SetupPath=D:\Steam\steamapps\common\FSX\ Looking in registry for FSX-SE install path: HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX Parameter"Install_Path" ... >>> OK! FOUND FSX-SE! <<< ... SetupPath=D:\Steam\steamapps\common\FSX ************ BUT this is the same path as for FSX! Will only install for FSX-SE ************ Looking in registry for Prepar3D v1 install path: HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v2 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v3 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"AppPath" ... NOT found! ... =========================================================== INSTALLATION FOR FSX-SE: SetupPath="D:\Steam\steamapps\common\FSX\" Checking version of the FSX-SE EXE: ... Version 10.0.62615.0 (Need at least 10.0.62607.0) Checking compatibility with installed SimConnect: Found SimConnect build 60905 (Original) Found SimConnect build 62615 (Steam) Found SimConnect build 61242 (SP1 May07) Found SimConnect build 61259 (Acc/SP2 Oct07) Checking if there's already a version of FSUIPC4 installed in: D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL ... No previous valid version found. FSX-SE Modules folder already exists. Okay -- installed FSUIPC4 into "D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX-SE\FSX_SE.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\birdg\AppData\Roaming" Found FSX_SE.CFG in "C:\Users\birdg\AppData\Roaming\Microsoft\FSX-SE\FSX_SE.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. (for FSUIPC4, without Loader) ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Default\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX_SE.CFG there Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\birdg\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX.CFG there Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX\FSX_SE.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\birdg\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX_SE.CFG there "Modules\FSUIPC Documents" folder created okay! Now installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "The 2016 List of FSX and P3D Controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "Offset Mapping for PMDG 777X.pdf" okay Installed "Offset Mapping for PMDG 747QOTSII.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay Installed "Profiles in Separate Files.pdf" okay Installed "FSUIPC4_Loader.dll" okay =========================================================== All installer tasks completed. Registration dialog exit: selected FSUIPC REGISTER Providing FSUIPC registration dialogue ... Registration for FSUIPC4 was successful! (result code 00) *************** End of Install Log *************** Noel

I did that Pete. Same problem. Here's the log: Installer for FSUIPC4.DLL version 4.974 Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" ... >>> OK! FOUND FSX! <<< ... SetupPath=D:\Steam\steamapps\common\FSX\ Looking in registry for FSX-SE install path: HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX Parameter"Install_Path" ... >>> OK! FOUND FSX-SE! <<< ... SetupPath=D:\Steam\steamapps\common\FSX ************ BUT this is the same path as for FSX! Will only install for FSX-SE ************ Looking in registry for Prepar3D v1 install path: HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v2 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v3 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"AppPath" ... NOT found! ... =========================================================== INSTALLATION FOR FSX-SE: SetupPath="D:\Steam\steamapps\common\FSX\" Checking version of the FSX-SE EXE: ... Version 10.0.62615.0 (Need at least 10.0.62607.0) Checking compatibility with installed SimConnect: Found SimConnect build 60905 (Original) Found SimConnect build 62615 (Steam) Found SimConnect build 61242 (SP1 May07) Found SimConnect build 61259 (Acc/SP2 Oct07) Checking if there's already a version of FSUIPC4 installed in: D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL ... No previous valid version found. FSX-SE Modules folder already exists. Okay -- installed FSUIPC4 into "D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX-SE\FSX_SE.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\birdg\AppData\Roaming" Found FSX_SE.CFG in "C:\Users\birdg\AppData\Roaming\Microsoft\FSX-SE\FSX_SE.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. (for FSUIPC4, without Loader) ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Default\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX_SE.CFG there Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\birdg\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX.CFG there Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX\FSX_SE.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\birdg\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX_SE.CFG there "Modules\FSUIPC Documents" folder already exists. Now installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "The 2016 List of FSX and P3D Controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "Offset Mapping for PMDG 777X.pdf" okay Installed "Offset Mapping for PMDG 747QOTSII.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay Installed "Profiles in Separate Files.pdf" okay Installed "FSUIPC4_Loader.dll" okay =========================================================== All installer tasks completed. Registration dialog exit: selected FSUIPC REGISTER Providing FSUIPC registration dialogue ... Registration for FSUIPC4 was successful! (result code 00) *************** End of Install Log ***************

I'm trying to register FSUICP into FSX_SE which I recently installed. It installs bit I can't register it. When I try to register it it says it regoistered OK. Then I press confirm. But when I brng up the simulator it tells me it's an unregistered copy. You will not the last section of the install log confirms the registration. Installer for FSUIPC4.DLL version 4.972 Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" ... >>> OK! FOUND FSX! <<< ... SetupPath=D:\Steam\steamapps\common\FSX\ Looking in registry for FSX-SE install path: HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX Parameter"Install_Path" ... >>> OK! FOUND FSX-SE! <<< ... SetupPath=D:\Steam\steamapps\common\FSX ************ BUT this is the same path as for FSX! Will only install for FSX-SE ************ Looking in registry for Prepar3D v1 install path: HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v2 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v3 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"AppPath" ... NOT found! ... =========================================================== INSTALLATION FOR FSX-SE: SetupPath="D:\Steam\steamapps\common\FSX\" Checking version of the FSX-SE EXE: ... Version 10.0.62615.0 (Need at least 10.0.62607.0) Checking compatibility with installed SimConnect: Found SimConnect build 60905 (Original) Found SimConnect build 62615 (Steam) Found SimConnect build 61242 (SP1 May07) Found SimConnect build 61259 (Acc/SP2 Oct07) Checking if there's already a version of FSUIPC4 installed in: D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL ... Version 4.972 found. FSX-SE Modules folder already exists. Okay -- installed FSUIPC4 into "D:\Steam\steamapps\common\FSX\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX-SE\FSX_SE.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\birdg\AppData\Roaming" Found FSX_SE.CFG in "C:\Users\birdg\AppData\Roaming\Microsoft\FSX-SE\FSX_SE.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. (for FSUIPC4, without Loader) ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Default\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX_SE.CFG there Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\birdg\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX.CFG there Looking for the current user's Application Data path: ... found as "C:\Users\birdg\AppData\Roaming" Now finding \Microsoft\FSX\FSX_SE.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\birdg\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX_SE.CFG there Looking in "C:\Users\Public\AppData\Roaming" ... No FSX_SE.CFG there "Modules\FSUIPC Documents" folder already exists. Now installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "The 2016 List of FSX and P3D Controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "Offset Mapping for PMDG 777X.pdf" okay Installed "Offset Mapping for PMDG 747QOTSII.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay Installed "Profiles in Separate Files.pdf" okay Installed "FSUIPC4_Loader.dll" okay =========================================================== All installer tasks completed. Registration dialog exit: selected FSUIPC REGISTER Providing FSUIPC registration dialogue ... Registration for FSUIPC4 was successful! (result code 00) *************** End of Install Log *************** Noel Sivertson

It's not your problem Thomas. I disabled FSUIPC.dll in the modules folder and the problem persists. I'll have to look elsewhere for the solution. Sorry to have troubled you. Noel

Still no joy Thomas. I downloaded version 5.103j and installed FSUIPC5.dll and GFDev64.dll into the modules folder and overwrote the old FSUIPC5.dll and then rebooted (cold reboot) my computer and the problem is still there. It's not a catastrophic thing. Once I bring up the Task Manager and then shut it down the keyboard works normally. It's only the keyboard that's disabled, not the Saitek controls. Noel

I have version 5,103 (25th June 2017) installed. I don't see a later one in the downloads section. Noel

My keyboard is dead after starting P3Dv4. I have to start the Task Manager and then just close it to get the keyboard to work. Everything runs fine after that. My Saitek X52 works fine on startup, only the keyboard is dead. My log below: ********* FSUIPC5, Version 5.103 (26th June 2017) by Pete Dowson ********* Running inside Prepar3D v4 Module base=7FED83A0000 Windows 7 Professional 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1) Sailplane.exe version = 4.0.28.21686 Checking the Registrations now ... User Name="Noel Sivertson" User Addr="birdguy@cableone.net" FSUIPC5 Key is provided WIDEFS7 not user registered, or expired 0 System time = 23/07/2017 21:53:24 0 FLT path = "C:\Users\Noel\Documents\Prepar3D v4 Files\" 0 ------ Module Version Check ------ 0 acontain.dll: 4.0.28.21686 0 api.dll: 4.0.28.21686 0 controls.dll: 4.0.28.21686 0 fs-traffic.dll: 4.0.28.21686 0 G3D.dll: 4.0.28.21686 0 language.dll: 4.0.28.21686 0 sim1.dll: 4.0.28.21686 0 visualfx.dll: 4.0.28.21686 0 weather.dll: 4.0.28.21686 0 window.dll: 4.0.28.21686 0 ---------------------------------- 16 FS path = "D:\Lockheed Martin\Prepar3D v4\" 125 ---------------------- Joystick Device Scan ----------------------- 125 Product= Saitek X52 Flight Control System 125 Manufacturer= Saitek 125 Vendor=06A3, Product=075C (Version 1.0) 141 GUIDs returned for product: VID_06A3&PID_075C: 141 GUID= {68843CD0-533F-11E5-8001-444553540000} 141 Details: Btns=34, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U255,V1023,X2047,Y2047,Z255 141 ------------------------------------------------------------------- 141 Device acquired for use: 141 Joystick ID = 0 (Registry okay) 141 0=Saitek X52 Flight Control System 141 0.GUID={68843CD0-533F-11E5-8001-444553540000} 141 ------------------------------------------------------------------- 156 LogOptions=00000000 00000001 156 SimConnect_Open succeeded: waiting to check version okay 156 Opened separate AI Traffic client okay 55427 Running in "Lockheed Martin® Prepar3D® v4", Version: 4.0.28.21686 (SimConnect: 4.0.0.0) 55459 Initialising SimConnect data requests now 55474 FSUIPC Menu entry added 55505 ... Using Prepar3D with Academic License 55505 C:\Users\Noel\Documents\Prepar3D v4 Files\ZZZ_Sailplane.fxml 55505 D:\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\DG808S\DG808S.air 131244 Aircraft loaded: running normally now ... 131244 User Aircraft ID 2 supplied, now being used 132055 System time = 23/07/2017 21:55:36, Simulator time = 14:51:35 (21:51Z) 132055 Aircraft="DG808S" 139060 Starting everything now ... 140214 Advanced Weather Interface Enabled 162460 Sim stopped: average frame rate for last 31 secs = 22.2 fps 162460 Max AI traffic was 1180 aircraft (Deleted 0) 165939 === Closing session: waiting for DLLStop to be called ... 175189 === DLLStop called ... 175189 === Closing external processes we started ... 176188 === About to kill any Lua plug-ins still running ... 176344 === Closing global Lua thread 177342 === About to kill my timers ... 177545 === Restoring window procs ... 177545 === Unloading libraries ... 177545 === stopping other threads ... 177545 === ... Button scanning ... 177639 === ... Axis scanning ... 177748 === Releasing joystick devices ... 177748 === Freeing macro memory 177748 === Removing any offset overrides 177748 === Clearing any displays left 177748 === Calling SimConnect_Close ... 179838 === SimConnect_Close done! 179838 === AI slots deleted! 179838 === Freeing button memory ... 179838 === Closing my Windows ... 179838 === Freeing FS libraries ... 180852 === Closing devices ... 180852 === Closing the Log ... Bye Bye! ... 180852 System time = 23/07/2017 21:56:25, Simulator time = 14:52:05 (21:52Z) 180852 *** FSUIPC log file being closed Minimum frame rate was 19.2 fps, Maximum was 23.0 fps Average frame rate for running time of 31 secs = 22.2 fps Maximum AI traffic for session was 1180 aircraft Memory managed: 14 Allocs, 13 Freed ********* FSUIPC Log file closed ***********

After getting fed up with all the problems I have been having with FSX/P3D/Orbx I decided to go back to FS9. I then installed FS9 and 9.1 upgrade and FSUIPC. It installed and is available on the upper task bar when FS9 is active. But it will not accept my registration number. It says it is not valid. And when I click on Modules\FSUIPC all I get is a black screen. I downloaded and installed FSUIPC 3.999z9 yesterday after installing FS9. FSX is no longer on my system. I've been using FSUIPC since the days of FS2002 (I think)...anyway, it's been a long time. This is the first time I recall having had a problem although at age 82 I do have long term memory lapses. Noel Sivertson

I just downloaded and installed (twice)the latest version of FSUIPC for P3dD v3.1. But FSUIPC says its an unregistered copy even though the install log says the registration was successful. I had this problem before with an earlier version but forgot how you fixed it. Here is the install log. Installer for FSUIPC4.DLL version 4.949h Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"AppPath" ... NOT found! ... Looking in registry for FSX-SE install path: HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX Parameter"Install_Path" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\DovetailGames\FSX Parameter"AppPath" Not there, so looking in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0 Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v1 install path: HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v2 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v3 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"SetupPath" ... >>> OK! FOUND Prepar3D v3! <<< ... SetupPath=D:\Lockheed Martin\Prepar3D v3\ =========================================================== INSTALLATION FOR Prepar3D v3: SetupPath="D:\Lockheed Martin\Prepar3D v3\" Checking version of the Prepar3D v3 EXE: ... Version 3.1.2.15831 (Need at least 1.0.677.0) Checking compatibility with installed SimConnect: Checking if there's already a version of FSUIPC4 installed in: D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL ... Version 4.949h found. Prepar3D v3 Modules folder already exists. Okay -- installed FSUIPC4 into "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Users\Noel\AppData\Roaming" Now finding \Lockheed Martin\Prepar3D v3\Prepar3D.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No Prepar3D.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No Prepar3D.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No Prepar3D.CFG there Looking in "C:\Users\Noel\AppData\Roaming" Found Prepar3D.CFG in "C:\Users\Noel\AppData\Roaming\Lockheed Martin\Prepar3D v3\Prepar3D.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. (for FSUIPC4, without Loader) ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Public\AppData\Roaming" ... No Prepar3D.CFG there "Modules\FSUIPC Documents" folder already exists. Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder: Installed "SimConnectP3D2.dll" okay Now installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "List of FSX and P3D controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "Offset Mapping for PMDG 777X.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay Installed "Profiles in Separate Files.pdf" okay =========================================================== All installer tasks completed. Registration dialog exit: selected FSUIPC REGISTER Providing FSUIPC registration dialogue ... Registration for FSUIPC4 was successful! (result code 00)

Thanks Pete. The renaming of the DLL, ini, and key files worked. I went that way because I have some more aircraft I want to start directly from my desktop. I have an .EXE, a .cfg, and a saved file for each such aircraft that I want to start by clicking on a desktop icon without having to go through the default selection screen. I click on the icon and it brings me directly to the aircraft sitting in a parking space at my home airport. Thanks again. Noel

Anticipating you might want to look at the normal startup P3D log here it is: ********* FSUIPC4, Version 4.949f by Pete Dowson ********* Prepar3D.exe version = 3.1.2.15831 Running inside Prepar3D v3 on Windows 7 Module base=5BF60000 User Name="Noel Sivertson" User Addr="birdguy@cableone.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 63 System time = 03/03/2016 07:45:27 63 FLT path = "C:\Users\Noel\Documents\Prepar3D v3 Files\" 63 ------ Module Version Check ------ 63 acontain.dll: 3.1.2.15831 63 api.dll: 3.1.2.15831 63 controls.dll: 3.1.2.15831 63 fs-traffic.dll: 3.1.2.15831 63 G3D.dll: 3.1.2.15831 63 language.dll: 3.1.2.15831 63 sim1.dll: 3.1.2.15831 63 visualfx.dll: 3.1.2.15831 63 weather.dll: 3.1.2.15831 63 window.dll: 3.1.2.15831 63 ---------------------------------- 63 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 63 Found it: trying to connect 78 FS path = "D:\Lockheed Martin\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= Saitek X52 Flight Control System 203 Manufacturer= Saitek 203 Vendor=06A3, Product=075C (Version 1.0) 203 Serial Number= 203 ------------------------------------------------------------------- 219 LogOptions=00000000 00000001 234 ------------------------------------------------------------------- 234 ------ Setting the hooks and direct calls into the simulator ------ 234 --- CONTROLS timer memory location obtained ok 234 --- SIM1 Frictions access gained 234 ASN active function link set 234 Hook Error: can't find .1543569056 in SIM1.dll 234 Hook Error: can't find .1543569056 in VISUALFX.dll 234 --- FS Controls Table located ok 234 --- Installed Mouse Macro hooks ok. 234 Wind smoothing is by ASN, not FSUIPC 234 Will switch smoothing action when ASN starts/stops 234 --- All links okay (except older global weather setting method) 234 ------------------------------------------------------------------- 234 SimConnect_Open succeeded: waiting to check version okay 234 Trying to use SimConnect Prepar3D 58969 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.1.3.1 (SimConnect: 3.1.0.0) 58969 Initialising SimConnect data requests now 58969 FSUIPC Menu entry added 58984 C:\Users\Noel\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml 58984 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 73367 === NOTE: not calling SimConnect_Close ... 74366 System time = 03/03/2016 07:46:41 74366 *** FSUIPC log file being closed Minimum frame rate was 32768.0 fps, Maximum was 0.0 fps Minimum available memory recorded was 32768Mb Memory managed: 4 Allocs, 4 Freed ********* FSUIPC Log file closed *********** Noel

I downloaded and installed version 4.949f. Then I entered my registration as follows: FSUIPC4 box (circle) selected Just enter new registration(s) box (circle) selected Entered name, email address, and KEY (in uppercase). Clicked OK Message: Thank you. Your registration has now been entered. Pressed confirm. But in the simulator it still shows as an unregistered version. The only log in the modules folder is the installation log. Here it is: Installer for FSUIPC4.DLL version 4.949f Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"AppPath" ... NOT found! ... Looking in registry for FSX-SE install path: HKEY_LOCAL_MACHINE\SOFTWARE\DovetailGames\FSX Parameter"Install_Path" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\DovetailGames\FSX Parameter"AppPath" Not there, so looking in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0 Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v1 install path: HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v2 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v3 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v3 Parameter"SetupPath" ... >>> OK! FOUND Prepar3D v3! <<< ... SetupPath=D:\Lockheed Martin\Prepar3D v3\ =========================================================== INSTALLATION FOR Prepar3D v3: SetupPath="D:\Lockheed Martin\Prepar3D v3\" Checking version of the Prepar3D v3 EXE: ... Version 3.1.2.15831 (Need at least 1.0.677.0) Checking compatibility with installed SimConnect: Checking if there's already a version of FSUIPC4 installed in: D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL ... No previous valid version found. Prepar3D v3 Modules folder already exists. Okay -- installed FSUIPC4 into "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Users\Noel\AppData\Roaming" Now finding \Lockheed Martin\Prepar3D v3\Prepar3D.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No Prepar3D.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No Prepar3D.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No Prepar3D.CFG there Looking in "C:\Users\Noel\AppData\Roaming" Found Prepar3D.CFG in "C:\Users\Noel\AppData\Roaming\Lockheed Martin\Prepar3D v3\Prepar3D.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. (for FSUIPC4, without Loader) ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Public\AppData\Roaming" ... No Prepar3D.CFG there "Modules\FSUIPC Documents" folder created okay! Now installing the Prepar3D SimConnect interface for FSUIPC4 into the "Modules" folder: Installed "SimConnectP3D2.dll" okay Now installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "List of FSX and P3D controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "Offset Mapping for PMDG 777X.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay Installed "Profiles in Separate Files.pdf" okay =========================================================== All installer tasks completed. Registration dialog exit: selected FSUIPC REGISTER Providing FSUIPC registration dialogue ... Registration for FSUIPC4 was successful! (result code 00) *************** End of Install Log *************** There is also a log for my Quest Kodiak since I use Kodiak.exe to start my simulator for a saved flight so I can bypass the normal startup screens. The Kodiak is the only aircraft I fly in P3D. Here is that log which says FSUIPC4 is not registered. ********* FSUIPC4, Version 4.949f by Pete Dowson ********* Kodiak.exe version = 3.1.2.15831 Running inside Prepar3D v3 on Windows 7 ... Prepar3D has been renamed as "Kodiak" Module base=5AF40000 User Name="" User Addr="" FSUIPC4 not user registered WIDEFS7 not user registered, or expired 47 System time = 03/03/2016 07:21:15 47 FLT path = "C:\Users\Noel\Documents\Prepar3D v3 Files\" 47 ------ Module Version Check ------ 47 acontain.dll: 3.1.2.15831 62 api.dll: 3.1.2.15831 62 controls.dll: 3.1.2.15831 62 fs-traffic.dll: 3.1.2.15831 62 G3D.dll: 3.1.2.15831 62 language.dll: 3.1.2.15831 62 sim1.dll: 3.1.2.15831 62 visualfx.dll: 3.1.2.15831 62 weather.dll: 3.1.2.15831 62 window.dll: 3.1.2.15831 62 ---------------------------------- 62 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 62 Found it: trying to connect 62 FS path = "D:\Lockheed Martin\Prepar3D v3\" 172 LogOptions=00000000 00000001 172 ------------------------------------------------------------------- 172 ------ Setting the hooks and direct calls into the simulator ------ 172 --- CONTROLS timer memory location obtained ok 172 --- SIM1 Frictions access gained 172 ASN active function link set 172 Hook Error: can't find .1526660768 in SIM1.dll 172 Hook Error: can't find .1526660768 in VISUALFX.dll 172 --- FS Controls Table located ok 172 --- Installed Mouse Macro hooks ok. 172 Wind smoothing is by ASN, not FSUIPC 172 Will switch smoothing action when ASN starts/stops 172 --- All links okay (except older global weather setting method) 172 ------------------------------------------------------------------- 172 SimConnect_Open succeeded: waiting to check version okay 172 Trying to use SimConnect Prepar3D 60060 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.1.3.1 (SimConnect: 3.1.0.0) 60060 Initialising SimConnect data requests now 60060 FSUIPC Menu entry added 60060 C:\Users\Noel\Documents\Prepar3D v3 Files\ZZZ_Kodiak.fxml 60060 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Kodiak\Kodiak.air 163396 System time = 03/03/2016 07:23:58, Simulator time = 07:22:15 (15:22Z) 164410 Starting everything now ... 164488 Ready for ASN WX radar 165751 Advanced Weather Interface Enabled 183457 Sim stopped: average frame rate for last 20 secs = 31.5 fps 218417 === NOTE: not calling SimConnect_Close ... 219416 System time = 03/03/2016 07:24:54, Simulator time = 07:22:36 (15:22Z) 219416 *** FSUIPC log file being closed Minimum frame rate was 27.9 fps, Maximum was 56.8 fps Minimum available memory recorded was 1461Mb Average frame rate for running time of 27 secs = 36.5 fps Memory managed: 15 Allocs, 15 Freed ********* FSUIPC Log file closed *********** What do I do now? Noel

Here it is ********* FSUIPC4, Version 4.949 by Pete Dowson ********* Prepar3D.exe version = 3.1.2.15831 Reading options from "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 7 Module base=5E8A0000 User Name="Noel Sivertson" User Addr="birdguy@cableone.net" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 63 System time = 26/01/2016 19:25:05 63 FLT path = "C:\Users\Noel\Documents\Prepar3D v3 Files\" 63 ------ Module Version Check ------ 63 acontain.dll: 3.1.2.15831 63 api.dll: 3.1.2.15831 63 controls.dll: 3.1.2.15831 63 fs-traffic.dll: 3.1.2.15831 63 G3D.dll: 3.1.2.15831 63 sim1.dll: 3.1.2.15831 63 visualfx.dll: 3.1.2.15831 63 weather.dll: 3.1.2.15831 63 window.dll: 3.1.2.15831 63 ---------------------------------- 63 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 63 Found it: trying to connect 78 FS path = "D:\Lockheed Martin\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= Saitek X52 Flight Control System 203 Manufacturer= Saitek 203 Vendor=06A3, Product=075C (Version 1.0) 203 Serial Number= 203 ------------------------------------------------------------------- 219 LogOptions=00000000 00000001 219 ------------------------------------------------------------------- 219 ------ Setting the hooks and direct calls into the simulator ------ 219 --- CONTROLS timer memory location obtained ok 219 --- SIM1 Frictions access gained 219 --- FS Controls Table located ok 219 --- Installed Mouse Macro hooks ok. 219 --- Wind smoothing fix is installed 219 --- All links okay (except older global weather setting method) 219 ------------------------------------------------------------------- 219 SimConnect_Open succeeded: waiting to check version okay 219 Trying to use SimConnect Prepar3D 57877 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.1.3.1 (SimConnect: 3.1.0.0) 57877 Initialising SimConnect data requests now 57877 FSUIPC Menu entry added 57877 C:\Users\Noel\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml 57877 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air 85739 === NOTE: not calling SimConnect_Close ... 86737 System time = 26/01/2016 19:26:31 86737 *** FSUIPC log file being closed Minimum frame rate was 32768.0 fps, Maximum was 0.0 fps Minimum available memory recorded was 32768Mb Memory managed: 4 Allocs, 4 Freed ********* FSUIPC Log file closed ***********

After switching from FSX to P3Dv3 my registration doesn't seem to take. It looks like it's accepting my registration and confirmation but when I go back to the sim FSUIPC tells me I have an unregistered version. I have FSUIPC4.949. Noel

I found the problem. It's in the unique way I have my FSX installation set up. It's rather complicated and I sent Pete an e-mail explaining it. But it works now. Noel

Sorry, I goofed on sending that information. I have sent you the FSUIPC4.log but apparently it wouldn't send the zipped key. I used regedit to find Lockheed Martin under HKEY_LOCAL_MACHINE\SOFTWARE but it's not there. I have: Khronos Macromedia Nothing that starts with 'L' I then searched the entire registry for Prepar3Dv2 but came up empty. My FSX installation is J:\Flight Simulator X on a dedicated SSD. I searched the 'J' drive for Prepar3D v2 but nothing came up. I never purchased nor installed Prepar3D. Noel

I only have 1 sim; Flight Simulator FSX. It is installed on a dedicated SSD 'J:/Flight Simulator X'. My OS is Windows 7 64bit I don't have Prepare3D so when it asks where that is I abort that and go on to the registration. The registration part of the install seems to go OK. I enter the data and get the message, "Thank you. Your registration has now been entered." Then I press Confirm. The following items are in the Modules Folder FSUIPC Document Folder FSUIPC4 Install.log FSUIPC4.key The key says: [user] Name=Noel Sivertson Address=DELETED FSUIPC=DELETED Here are the contents of the install log. You will note at the end it says : Registration for FSUIPC4 was successful! (result code 00) Installer for FSUIPC4.DLL version 4.939j Looking in registry for FSX install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator\10.0 Parameter"SetupPath" ... >>> OK! FOUND FSX! <<< ... SetupPath=J:\Flight Simulator X Looking in registry for FSX-SE install path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0 Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0 Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v1 install path: HKEY_LOCAL_MACHINE\SOFTWARE\LockheedMartin\Prepar3D Parameter"SetupPath" Not there, so looking in: HKEY_CURRENT_USER\SOFTWARE\LockheedMartin\Prepar3D Parameter"AppPath" ... NOT found! ... Looking in registry for Prepar3D v2 install path: HKEY_LOCAL_MACHINE\SOFTWARE\Lockheed Martin\Prepar3D v2 Parameter"SetupPath" ... >>> OK! FOUND Prepar3D v2! <<< ... SetupPath=J:\Flight Simulator X =========================================================== INSTALLATION FOR FSX: SetupPath="J:\Flight Simulator X\" Checking version of the FSX EXE: ... Version 10.0.61637.0 (Need at least 10.0.60905.0) Checking compatibility with installed SimConnect: Found SimConnect build 60905 (Original) Found SimConnect build 61242 (SP1 May07) Found SimConnect build 61259 (Acc/SP2 Oct07) Checking if there's already a version of FSUIPC4 installed in: J:\Flight Simulator X\Modules\FSUIPC4.DLL ... No previous valid version found. FSX Modules folder created okay! Okay -- installed FSUIPC4 into "J:\Flight Simulator X\Modules\FSUIPC4.DLL" Looking for the current user's Application Data path: ... found as "C:\Users\Owner\AppData\Roaming" Now finding \Microsoft\FSX\FSX.CFG for all users, including this one Looking in "C:\Users\All Users\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Default User\AppData\Roaming" ... No FSX.CFG there Looking in "C:\Users\Owner\AppData\Roaming" Found FSX.CFG in "C:\Users\Owner\AppData\Roaming\Microsoft\FSX\FSX.CFG" Now checking DLL.XML ... ... There is a previous DLL.XML, checking for FSUIPC4 section. ... FSUIPC4 section already exists but will be replaced. (for FSUIPC4, without Loader) ... FSUIPC4 section of DLL.XML written okay Now checking for a SimConnect.XML file ... ... No SimConnect.XML file found. This is okay. Looking in "C:\Users\Public\AppData\Roaming" ... No FSX.CFG there "Modules\FSUIPC Documents" folder created okay! Now installing additional files into the "Modules\FSUIPC Documents" folder: Installed "FSUIPC4 User Guide.pdf" okay Installed "FSUIPC4 for Advanced Users.pdf" okay Installed "FSUIPC4 History.pdf" okay Installed "List of FSX and P3D controls.pdf" okay Installed "FSUIPC Lua Library.pdf" okay Installed "FSUIPC Lua Plug-Ins.pdf" okay Installed "Lua License.pdf" okay Installed "Lua Plugins for VRInsight Devices.pdf" okay Installed "LuaFileSystem.pdf" okay Installed "Example LUA plugins.zip" okay Installed "ASN WX Radar facilities in FSUIPC4.pdf" okay Installed "Offset Mapping for PMDG 737NGX.pdf" okay Installed "FSUIPC4 Offsets Status.pdf" okay Installed "Profiles in Separate Files.pdf" okay =========================================================== INSTALLATION FOR Prepar3D v2: SetupPath="J:\Flight Simulator X\" Checking version of the Prepar3D v2 EXE: Couldn't obtain Version Info! Asking user to find Prepar3D v2.EXE ... User aborted attempt to find Prepar3D v2. Installation failed. =========================================================== All installer tasks completed. Registration for FSUIPC4 was successful! (result code 00) *************** End of Install Log ***************

I just purchased FSUIPC from Simmarket and installed it but I can't get the registration to work. I entered my name, email address and registration number but when I got to FSUIPC it says it's not a registered copy. The box at the right says to reinstall and register again. I've done that four times now with no luck. How do I get the program registered? Noel Sivertson