[Button presses and most axis not recognised in FSUIPC 4948]

"I can only suggest uninstalling them (via the Device Manager in the Windows control panel -- uninstall including drivers, unplug them, then re-boot the PC and re-connect them. "

 

That seems to have done the trick - had to manually download and install the drivers, but now FSUIPC is seeing all the buttons as far as I can tell.

 

Thanks a lot for all your help on this Pete.

 

Graham

[Button presses and most axis not recognised in FSUIPC 4948]

Done.  It does seem to, it just isn't let program anything to what it detects - as the UI isn't seeing anything!

 

Graham

[Button presses and most axis not recognised in FSUIPC 4948]

That's generated 55k lines in the log file - I taxied, took off and climbed out, all buttons and axis used in flight, and then opened FSUIPC and moved them all in there too.  The forum doesn't seem to want to let me paste it into a post - even split into sections, and I can't see an attach file option?  Can I PM or email the file to you Pete?

[Button presses and most axis not recognised in FSUIPC 4948]

OK, log below after adding those lines.  I had the Saitek software installed but it occasionally caused button presses to be sent to windows when I wasn't in a game so I deleted it and ran a ccleaner registry clean afterwards.  Other than that, I installed joyID's after reading another thread on here, but as far as I know that doesn't run in the background, and this problem pre-dates that install anyway.    Can't think of anything else that could cause the problem?  I use the PMDG 737 NGX, Air Hauler, P3D V3, Pro ATC/X and ASN.  The issue pre-dates install of the 737 and Pro ATC/X at least though, and happens even when I haven't opened ASN or AH before I launch P3D.

 

********* FSUIPC4, Version 4.948e by Pete Dowson *********

Prepar3D.exe version = 3.0.10.14945

Reading options from "E:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"

Running inside Prepar3D v3 on Windows 8.0

Module base=16D90000

User Name=""

User Addr="vfrhawk@hotmail.com"

FSUIPC4 Key is provided

WideFS7 Key is provided

      454 System time = 18/12/2015 16:14:57

      454 FLT UNC path = "\\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\"

      454 ------ Module Version Check ------

      454        acontain.dll: 3.0.10.14945

      454             api.dll: 3.0.10.14945

      454        controls.dll: 3.0.10.14945

      454      fs-traffic.dll: 3.0.10.14945

      454             G3D.dll: 3.0.10.14945

      454            sim1.dll: 3.0.10.14945

      454        visualfx.dll: 3.0.10.14945

      454         weather.dll: 3.0.10.14945

      454          window.dll: 3.0.10.14945

      454 ----------------------------------

      454 Trying E:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll

      500 Found it: trying to connect

      500 FS UNC path = "E:\Lockheed Martin\Prepar3D v3\"

      579 #### Initialising Dlrectinput Axis Scanning ...

      594    Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_A215\Calibration\0"

      594    Found correct joystick Id 0

      594    ... and a "GUID" value

      610 ... okay, Acquired device as #0

      610    Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_2215\Calibration\0"

      610    Found correct joystick Id 1

      610    ... and a "GUID" value

      610 ... okay, Acquired device as #1

      610    Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0763\Calibration\0"

      610    Found correct joystick Id 2

      610    ... and a "GUID" value

      610 ... okay, Acquired device as #2

      610 ---------------------- Joystick Device Scan -----------------------

      610 Checking: \\?\hid#vid_0951&pid_16a4&mi_03&col01#7&1c94fa2&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_1b1c&pid_1c0d#6&390dc39e&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_0738&pid_a215&mi_02#8&2e6068d8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_e0ff&pid_0002&mi_01&col01#8&b67a4cb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_0951&pid_16a4&mi_03&col02#7&1c94fa2&1&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_06a3&pid_0763#6&32b02881&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Product= Saitek Pro Flight Rudder Pedals

      610    Manufacturer= Saitek

      610    Vendor=06A3, Product=0763 (Version 1.1)

      610    Serial Number= Saitek

      610 Checking: \\?\hid#vid_e0ff&pid_0002&mi_00#8&1e97c109&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_e0ff&pid_0002&mi_01&col02#8&b67a4cb&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_0951&pid_16a4&mi_03&col03#7&1c94fa2&1&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_0738&pid_2215&mi_02#9&114007b2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_045e&pid_074b&mi_01#7&34e2812d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_e0ff&pid_0002&mi_01&col03#8&b67a4cb&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Checking: \\?\hid#vid_0738&pid_a215&mi_00#8&3a741a55&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Product= Saitek Pro Flight X-55 Rhino Throttle

      610    Manufacturer= Madcatz

      610    Vendor=0738, Product=A215 (Version 0.119)

      610    Serial Number= G0000836

      610 Checking: \\?\hid#vid_0738&pid_2215&mi_00#9&366e73d2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 Product= Saitek Pro Flight X-55 Rhino Stick

      610    Manufacturer= Madcatz

      610    Vendor=0738, Product=2215 (Version 0.87)

      610    Serial Number= G0001495

      610 Checking: \\?\hid#vid_045e&pid_074b&mi_00#7&110b436b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}

      610 -------------------------------------------------------------------

      610 #### Completed Dlrectinput Axis Scanning

      610 ---------- Making INI JoyNames Section ----------

      610    Joy#0: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0738&PID_A215\"

      610    Joy#0: OEMName = "Saitek Pro Flight X-55 Rhino Throttle"

      610    Joy#0: GUID = {C94D6E20-8269-11E5-8005-444553540000}

      610    Joy#1: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0738&PID_2215\"

      610    Joy#1: OEMName = "Saitek Pro Flight X-55 Rhino Stick"

      625    Joy#1: GUID = {C94D9530-8269-11E5-8007-444553540000}

      625    Joy#2: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0763\"

      625    Joy#2: OEMName = "Saitek Pro Flight Rudder Pedals"

      625    Joy#2: GUID = {C94DBC40-8269-11E5-8009-444553540000}

      625 -------------------------------------------------

      641 Device at "\\?\hid#vid_0951&pid_16a4&mi_03&col01#7&1c94fa2&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      641 HID: Vendor=0951, Product=16A4 (Version 0.3)

      641 Manufacturer= Kingston

      672 Product= HyperX 7.1 Audio

      672 Serial Number= 00000000

      672 Device at "\\?\hid#vid_1b1c&pid_1c0d#6&390dc39e&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      672 HID: Vendor=1B1C, Product=1C0D (Version 0.2)

      688 Manufacturer=                          

      688 Product=                       

      688 Serial Number=                       

      688 Device at "\\?\hid#vid_0738&pid_a215&mi_02#8&2e6068d8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      688 HID: Vendor=0738, Product=A215 (Version 0.119)

      688 Manufacturer= Madcatz

      688 Product= Saitek Pro Flight X-55 Rhino Throttle

      688 Serial Number= G0000836

      688 Device at "\\?\hid#vid_e0ff&pid_0002&mi_01&col01#8&b67a4cb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      688 HID: Vendor=E0FF, Product=0002 (Version 0.1)

      688 Manufacturer= A.....

      688 Product= Shogun Bros. Ballista MK-I Mouse

      688 Serial Number= Shogun Bros. Ballista MK-I Mouse

      688 Device at "\\?\hid#vid_0951&pid_16a4&mi_03&col02#7&1c94fa2&1&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      688 HID: Vendor=0951, Product=16A4 (Version 0.3)

      704 Manufacturer= Kingston

      719 Product= HyperX 7.1 Audio

      735 Serial Number= 00000000

      735 Device at "\\?\hid#vid_06a3&pid_0763#6&32b02881&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      735 HID: Vendor=06A3, Product=0763 (Version 1.1)

      735 Manufacturer= Saitek

      735 Product= Saitek Pro Flight Rudder Pedals

      735 Serial Number= Saitek Pro Flight Rudder Pedals

      735 Device at "\\?\hid#vid_0951&pid_16a4&mi_03&col03#7&1c94fa2&1&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      735 HID: Vendor=0951, Product=16A4 (Version 0.3)

      750 Manufacturer= Kingston

      766 Product= HyperX 7.1 Audio

      782 Serial Number= 00000000

      782 Device at "\\?\hid#vid_0738&pid_2215&mi_02#9&114007b2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      782 HID: Vendor=0738, Product=2215 (Version 0.87)

      782 Manufacturer= Madcatz

      782 Product= Saitek Pro Flight X-55 Rhino Stick

      782 Serial Number= G0001495

      782 Device at "\\?\hid#vid_045e&pid_074b&mi_01#7&34e2812d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      782 HID: Vendor=045E, Product=074B (Version 2.96)

      782 Manufacturer= Microsoft

      782 Product= Microsoft® SiderWinderTM X6 Keyboard

      782 Serial Number= Microsoft® SiderWinderTM X6 Keyboard

      782 Device at "\\?\hid#vid_e0ff&pid_0002&mi_01&col03#8&b67a4cb&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      782 HID: Vendor=E0FF, Product=0002 (Version 0.1)

      782 Manufacturer= A.....

      782 Product= Shogun Bros. Ballista MK-I Mouse

      782 Serial Number= Shogun Bros. Ballista MK-I Mouse

      782 Device at "\\?\hid#vid_0738&pid_a215&mi_00#8&3a741a55&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      782 HID: Vendor=0738, Product=A215 (Version 0.119)

      782 Manufacturer= Madcatz

      782 Product= Saitek Pro Flight X-55 Rhino Throttle

      782 Serial Number= G0000836

      782 Device at "\\?\hid#vid_0738&pid_2215&mi_00#9&366e73d2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"

      782 HID: Vendor=0738, Product=2215 (Version 0.87)

      782 Manufacturer= Madcatz

      797 Product= Saitek Pro Flight X-55 Rhino Stick

      797 Serial Number= 

      797 LogOptions=00000000 02002011

      797 -------------------------------------------------------------------

      797 ------ Setting the hooks and direct calls into the simulator ------

      797 --- CONTROLS timer memory location obtained ok

      797 --- SIM1 Frictions access gained

      797 --- FS Controls Table located ok

      797 --- Installed Mouse Macro hooks ok.

      797 --- Wind smoothing fix is installed

      797 --- All links okay (except older global weather setting method)

      797 -------------------------------------------------------------------

      797 SimConnect_Open succeeded: waiting to check version okay

      797 Trying to use SimConnect Prepar3D

     4610 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)

     4610 Initialising SimConnect data requests now

     4610 FSUIPC Menu entry added

     4625 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y

     4625 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\Default.fxml

     4625 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air

     4829 Memory in use: 788Mb, Avail=3308Mb

    47532 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N

    48000 System time = 18/12/2015 16:15:44, Simulator time = 16:15:02 (16:15Z)

    48000 Aircraft="Beech Baron 58 w G1000"

    49016 Starting everything now ...

    49047 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N

    49079 ASN active function link set

    49079 Ready for ASN WX radar

    50172 Advanced Weather Interface Enabled

    56047 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y

    65063 Memory in use: 2546Mb, Avail=1550Mb

    76063 ---------- Making INI JoyNames Section ----------

    76063    Joy#0: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0738&PID_A215\"

    76063    Joy#0: OEMName = "Saitek Pro Flight X-55 Rhino Throttle"

    76063    Joy#0: GUID = {C94D6E20-8269-11E5-8005-444553540000}

    76063    Joy#1: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0738&PID_2215\"

    76063    Joy#1: OEMName = "Saitek Pro Flight X-55 Rhino Stick"

    76063    Joy#1: GUID = {C94D9530-8269-11E5-8007-444553540000}

    76063    Joy#2: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0763\"

    76063    Joy#2: OEMName = "Saitek Pro Flight Rudder Pedals"

    76079    Joy#2: GUID = {C94DBC40-8269-11E5-8009-444553540000}

    76079 -------------------------------------------------

    76360 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N

    82797 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y

   100750 === NOTE: not calling SimConnect_Close ...

   101750 System time = 18/12/2015 16:16:38, Simulator time = 16:15:14 (16:15Z)

   101750 *** FSUIPC log file being closed

Minimum frame rate was 45.0 fps, Maximum was 50.8 fps

Minimum available memory recorded was 1539Mb

Average frame rate for running time of 13 secs = 45.8 fps

Memory managed: 37 Allocs, 37 Freed

********* FSUIPC Log file closed ***********

[Button presses and most axis not recognised in FSUIPC 4948]

OK, I load P3D V3, go into FSUIPC, select the Buttons + Switches tab, and whatever buttons I press on either the stick or throttle, nothing is recognised.  The "Press the joystick button you wish to program" section doesn't react at all.

 

I haven't tried programming axes as I do that in P3D itself - I just happened to notice whilst I was exploring FSUIPC after this problem raised it's head that the Axis Assignment tab recognises input from my pedals, but not anything else.

 

All I wanted to do was program 1, 2, 3 and 0 as inputs to a hat switch for use with Pro ATC/X!  :)

 

Thanks for your help

Graham

[Button presses and most axis not recognised in FSUIPC 4948]

Apologies, both for the delay and the incorrect info.  Here's the .ini file:

 

[General]

Console=No

UpdatedByVersion=4948e

History=5JH2QMHXRPKW42CF85ZKZ

InitDelayDevicesToo=No

NewInterceptTextMenu=No

UseSystemTime=No

UseMidMouseBtn=Yes

MouseWheelMove=No

MouseWheelTrim=No

MouseWheelTrimSpeed=1

JoystickTimeout=20

PollGFTQ6=Yes

BlankDisplays=No

FixControlAccel=No

FixMachSpeedBug=No

DeleteVehiclesForAES=Yes

AutoScanDevices=Yes

AssignJoystickIDs=Yes

VisibilityOptions=No

OneCloudLayer=No

CloudTurbulence=No

CloudIcing=No

GenerateCirrus=No

SuppressCloudTurbulence=No

MaxIce=-4

MinIce=-4

UpperWindGusts=No

SuppressWindTurbulence=No

SuppressWindVariance=No

WindTurbulence=No

TurbulenceRate=1.0,5.0

TurbulenceDivisor=20,20,40,40

SuppressAllGusts=No

MaxSurfaceWind=0

WindLimitLevel=200

WindDiscardLevel=400

WindAjustAltitude=No

WindAjustAltitudeBy=2000

SmoothBySimTime=No

WindSmoothing=No

WindSmoothness=2

WindSmoothAirborneOnly=Yes

PressureSmoothness=0

TemperatureSmoothness=0

DisconnTrimForAP=No

ZeroElevForAPAlt=No

ThrottleSyncAll=No

WhiteMessages=No

ShowPMcontrols=No

SpoilerIncrement=512

MagicBattery=No

RudderSpikeRemoval=No

ElevatorSpikeRemoval=No

AileronSpikeRemoval=No

ReversedElevatorTrim=No

ClockSync=No

ClockSyncMins=5

ClearWeatherDynamics=No

OwnWeatherChanges=No

TimeForSelect=4

LoadFlightMenu=No

LoadPlanMenu=No

PauseAfterCrash=No

BrakeReleaseThreshold=75

SaveDataWithFlights=No

ZapSound=firework

ShortAircraftNameOk=Substring

UseProfiles=Yes

EnableMouseLook=No

DelayedMouseLookZoom=No

AxesWrongRange=No

TCASid=Flight

TCASrange=40

AxisCalibration=No

DirectAxesToCalibs=No

ShowMultilineWindow=Yes

SuppressSingleline=No

SuppressMultilineFS=No

AxisIntercepts=No

DontResetAxes=No

InitDelay=0

GetNearestAirports=No

OOMcheck=Yes

OOMcheckInterval=10

WeatherReadFactor=2

WeatherRewriteSeconds=1

CustomWeatherModify=No

SimConnectStallTime=1

InitialStallTime=10

NormalStallTime=1

LuaRerunDelay=66

FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.0.3.0

SimConnectUsed=3.0.0.0

 

[JoyNames]

AutoAssignLetters=No

0=Saitek Pro Flight X-55 Rhino Throttle

0.GUID={C94D6E20-8269-11E5-8005-444553540000}

1=Saitek Pro Flight X-55 Rhino Stick

1.GUID={C94D9530-8269-11E5-8007-444553540000}

2=Saitek Pro Flight Rudder Pedals

2.GUID={C94DBC40-8269-11E5-8009-444553540000}

 

[Axes]

PollInterval=10

RangeRepeatRate=10

 

[buttons]

PollInterval=25

ButtonRepeat=20,10

 

[AutoSave]

Next=1

Interval=60

Files=10

SaveOnGround=No

AutoSaveEnabled=No

 

[GPSout]

GPSoutEnabled=No

 

[GPSout2]

GPSoutEnabled=No

 

[WideServer]

WideFSenabled=Yes

AdvertiseService=1

Port=8002

Port2=9002

 

[sounds]

Path=E:\Lockheed Martin\Prepar3D v3\Sound\

Device1=Primary Sound Driver

Device2=Headset Earphone (HyperX 7.1 Audio)

Device3=Acer X34-8 (NVIDIA High Definition Audio)

Device4=Realtek Digital Output (Realtek High Definition Audio)

 

[Window.AirHauler Message]

Docked=200, 2457, 3572, 568

[Button presses and most axis not recognised in FSUIPC 4948]

Sorry for the delay, my internet died earlier in the week.  Now it's been resuscitated:

 

********* FSUIPC4, Version 4.948 by Pete Dowson *********

Reading options from "E:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"

Running inside Prepar3D v3 on Windows 8.0

Module base=16700000

User Name=""

User Addr=""

FSUIPC4 Key is provided

WideFS7 Key is provided

      234 System time = 10/11/2015 21:54:38

      234 FLT UNC path = "\\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\"

      234 Trying E:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll

      234 Found it: trying to connect

      250 FS UNC path = "E:\Lockheed Martin\Prepar3D v3\"

      359 ---------------------- Joystick Device Scan -----------------------

      375 Product= Saitek Pro Flight Rudder Pedals

      375    Manufacturer= Saitek

      375    Vendor=06A3, Product=0763 (Version 1.1)

      375    Serial Number= Saitek

      375 Product= Saitek Pro Flight X-55 Rhino Throttle

      375    Manufacturer= Madcatz

      375    Vendor=0738, Product=A215 (Version 0.119)

      375    Serial Number= G0000836

      375 Product= Saitek Pro Flight X-55 Rhino Stick

      375    Manufacturer= Madcatz

      375    Vendor=0738, Product=2215 (Version 0.87)

      375    Serial Number= G0001495

      375 -------------------------------------------------------------------

      391 LogOptions=00000000 00000001

      391 -------------------------------------------------------------------

      391 ------ Setting the hooks and direct calls into the simulator ------

      391 --- CONTROLS timer memory location obtained ok

      391 --- SIM1 Frictions access gained

      391 --- FS Controls Table located ok

      391 --- Installed Mouse Macro hooks ok.

      391 --- Wind smoothing fix is installed

      391 --- All links okay (except older global weather setting method)

      391 -------------------------------------------------------------------

      391 SimConnect_Open succeeded: waiting to check version okay

      391 Trying to use SimConnect Prepar3D

     4687 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)

     4687 Initialising SimConnect data requests now

     4687 FSUIPC Menu entry added

     4703 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.flt

     4703 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.pln

     4703 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air

     4703 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.pln

    63906 System time = 10/11/2015 21:55:41, Simulator time = 21:54:44 (21:54Z)

    63906 Aircraft="Beech Baron 58 w G1000"

    64906 Starting everything now ...

    64969 ASN active function link set

    64969 Ready for ASN WX radar

    68266 Advanced Weather Interface Enabled

    86609 Sim stopped: average frame rate for last 23 secs = 19.9 fps

   198375 Sim stopped: average frame rate for last 72 secs = 19.9 fps

   217359 === NOTE: not calling SimConnect_Close ...

   218359 System time = 10/11/2015 21:58:16, Simulator time = 21:56:05 (21:56Z)

   218359 *** FSUIPC log file being closed

Minimum frame rate was 19.3 fps, Maximum was 20.0 fps

Minimum available memory recorded was 1532Mb

Average frame rate for running time of 107 secs = 19.9 fps

Memory managed: 29 Allocs, 29 Freed

********* FSUIPC Log file closed ***********

[Button presses and most axis not recognised in FSUIPC 4948]

Hi,

 

Wondering if someone can help.

 

I've just built a new, powerful PC mostly for P3D V3.  I have varios Orbx sceneries, and ASN for it.

 

I've installed the latest FSUIPC (4948), but when I go into it in P3D in the button presses section it doesn't recognise any buttons on either by X55 stick or throttle, and in the axis assignment section it only recognises my Saitek rudder pedals.  However, all 3 controllers work fine in P3D?

 

Here's the P3D log (edited to take my name etc out):

 

********* FSUIPC4, Version 4.948 by Pete Dowson *********

Reading options from "E:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"

Running inside Prepar3D v3 on Windows 8.0

Module base=172E0000

User Name=""

User Addr=""

FSUIPC4 Key is provided

WideFS7 Key is provided

      375 System time = 06/11/2015 16:31:28

      375 FLT UNC path = "\\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\"

      375 Trying E:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll

      390 Found it: trying to connect

      390 FS UNC path = "E:\Lockheed Martin\Prepar3D v3\"

      515 ---------------------- Joystick Device Scan -----------------------

      515 Product= Saitek Pro Flight X-55 Rhino Throttle

      515    Manufacturer= Madcatz

      515    Vendor=0738, Product=A215 (Version 0.119)

      515    Serial Number= G0000836

      531 Product= Saitek Pro Flight X-55 Rhino Stick

      531    Manufacturer= Madcatz

      531    Vendor=0738, Product=2215 (Version 0.87)

      531    Serial Number= G0001495

      531 Product= Saitek Pro Flight Rudder Pedals

      531    Manufacturer= Saitek

      531    Vendor=06A3, Product=0763 (Version 1.1)

      531    Serial Number= Saitek

      531 -------------------------------------------------------------------

      531 LogOptions=00000000 00000001

      531 -------------------------------------------------------------------

      531 ------ Setting the hooks and direct calls into the simulator ------

      531 --- CONTROLS timer memory location obtained ok

      547 --- SIM1 Frictions access gained

      547 --- FS Controls Table located ok

      547 --- Installed Mouse Macro hooks ok.

      547 --- Wind smoothing fix is installed

      547 --- All links okay (except older global weather setting method)

      547 -------------------------------------------------------------------

      547 SimConnect_Open succeeded: waiting to check version okay

      547 Trying to use SimConnect Prepar3D

     6234 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)

     6234 Initialising SimConnect data requests now

     6234 FSUIPC Menu entry added

     6250 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.flt

     6250 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.pln

     6250 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air

     6250 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.pln

    39672 System time = 06/11/2015 16:32:08, Simulator time = 16:31:35 (16:31Z)

    39672 Aircraft="Beech Baron 58 w G1000"

    40687 Starting everything now ...

    40750 ASN active function link set

    40750 Ready for ASN WX radar

    43859 Advanced Weather Interface Enabled

   116515 Sim stopped: average frame rate for last 40 secs = 19.9 fps

   133953 === NOTE: not calling SimConnect_Close ...

   134953 System time = 06/11/2015 16:33:43, Simulator time = 16:32:11 (16:32Z)

   134953 *** FSUIPC log file being closed

Minimum frame rate was 19.8 fps, Maximum was 20.0 fps

Minimum available memory recorded was 1719Mb

Average frame rate for running time of 46 secs = 19.9 fps

Memory managed: 15 Allocs, 15 Freed

********* FSUIPC Log file closed ***********

 

That shows all 3 controllers, so I'm a bit lost as to why they aren't working?  Any help appreciated!

 

Graham