VFRHawk
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by VFRHawk
-
-
Done. It does seem to, it just isn't let program anything to what it detects - as the UI isn't seeing anything!
Graham
-
That's generated 55k lines in the log file - I taxied, took off and climbed out, all buttons and axis used in flight, and then opened FSUIPC and moved them all in there too. The forum doesn't seem to want to let me paste it into a post - even split into sections, and I can't see an attach file option? Can I PM or email the file to you Pete?
-
OK, log below after adding those lines. I had the Saitek software installed but it occasionally caused button presses to be sent to windows when I wasn't in a game so I deleted it and ran a ccleaner registry clean afterwards. Other than that, I installed joyID's after reading another thread on here, but as far as I know that doesn't run in the background, and this problem pre-dates that install anyway. Can't think of anything else that could cause the problem? I use the PMDG 737 NGX, Air Hauler, P3D V3, Pro ATC/X and ASN. The issue pre-dates install of the 737 and Pro ATC/X at least though, and happens even when I haven't opened ASN or AH before I launch P3D.
********* FSUIPC4, Version 4.948e by Pete Dowson *********Prepar3D.exe version = 3.0.10.14945Reading options from "E:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 8.0Module base=16D90000User Name=""User Addr="vfrhawk@hotmail.com"FSUIPC4 Key is providedWideFS7 Key is provided454 System time = 18/12/2015 16:14:57454 FLT UNC path = "\\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\"454 ------ Module Version Check ------454 acontain.dll: 3.0.10.14945454 api.dll: 3.0.10.14945454 controls.dll: 3.0.10.14945454 fs-traffic.dll: 3.0.10.14945454 G3D.dll: 3.0.10.14945454 sim1.dll: 3.0.10.14945454 visualfx.dll: 3.0.10.14945454 weather.dll: 3.0.10.14945454 window.dll: 3.0.10.14945454 ----------------------------------454 Trying E:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll500 Found it: trying to connect500 FS UNC path = "E:\Lockheed Martin\Prepar3D v3\"579 #### Initialising Dlrectinput Axis Scanning ...594 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_A215\Calibration\0"594 Found correct joystick Id 0594 ... and a "GUID" value610 ... okay, Acquired device as #0610 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_0738&PID_2215\Calibration\0"610 Found correct joystick Id 1610 ... and a "GUID" value610 ... okay, Acquired device as #1610 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0763\Calibration\0"610 Found correct joystick Id 2610 ... and a "GUID" value610 ... okay, Acquired device as #2610 ---------------------- Joystick Device Scan -----------------------610 Checking: \\?\hid#vid_0951&pid_16a4&mi_03&col01#7&1c94fa2&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_1b1c&pid_1c0d#6&390dc39e&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_0738&pid_a215&mi_02#8&2e6068d8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_e0ff&pid_0002&mi_01&col01#8&b67a4cb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_0951&pid_16a4&mi_03&col02#7&1c94fa2&1&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_06a3&pid_0763#6&32b02881&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Product= Saitek Pro Flight Rudder Pedals610 Manufacturer= Saitek610 Vendor=06A3, Product=0763 (Version 1.1)610 Serial Number= Saitek610 Checking: \\?\hid#vid_e0ff&pid_0002&mi_00#8&1e97c109&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_e0ff&pid_0002&mi_01&col02#8&b67a4cb&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_0951&pid_16a4&mi_03&col03#7&1c94fa2&1&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_0738&pid_2215&mi_02#9&114007b2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_045e&pid_074b&mi_01#7&34e2812d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_e0ff&pid_0002&mi_01&col03#8&b67a4cb&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Checking: \\?\hid#vid_0738&pid_a215&mi_00#8&3a741a55&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Product= Saitek Pro Flight X-55 Rhino Throttle610 Manufacturer= Madcatz610 Vendor=0738, Product=A215 (Version 0.119)610 Serial Number= G0000836610 Checking: \\?\hid#vid_0738&pid_2215&mi_00#9&366e73d2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 Product= Saitek Pro Flight X-55 Rhino Stick610 Manufacturer= Madcatz610 Vendor=0738, Product=2215 (Version 0.87)610 Serial Number= G0001495610 Checking: \\?\hid#vid_045e&pid_074b&mi_00#7&110b436b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}610 -------------------------------------------------------------------610 #### Completed Dlrectinput Axis Scanning610 ---------- Making INI JoyNames Section ----------610 Joy#0: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0738&PID_A215\"610 Joy#0: OEMName = "Saitek Pro Flight X-55 Rhino Throttle"610 Joy#0: GUID = {C94D6E20-8269-11E5-8005-444553540000}610 Joy#1: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0738&PID_2215\"610 Joy#1: OEMName = "Saitek Pro Flight X-55 Rhino Stick"625 Joy#1: GUID = {C94D9530-8269-11E5-8007-444553540000}625 Joy#2: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0763\"625 Joy#2: OEMName = "Saitek Pro Flight Rudder Pedals"625 Joy#2: GUID = {C94DBC40-8269-11E5-8009-444553540000}625 -------------------------------------------------641 Device at "\\?\hid#vid_0951&pid_16a4&mi_03&col01#7&1c94fa2&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"641 HID: Vendor=0951, Product=16A4 (Version 0.3)641 Manufacturer= Kingston672 Product= HyperX 7.1 Audio672 Serial Number= 00000000672 Device at "\\?\hid#vid_1b1c&pid_1c0d#6&390dc39e&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"672 HID: Vendor=1B1C, Product=1C0D (Version 0.2)688 Manufacturer=688 Product=688 Serial Number=688 Device at "\\?\hid#vid_0738&pid_a215&mi_02#8&2e6068d8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"688 HID: Vendor=0738, Product=A215 (Version 0.119)688 Manufacturer= Madcatz688 Product= Saitek Pro Flight X-55 Rhino Throttle688 Serial Number= G0000836688 Device at "\\?\hid#vid_e0ff&pid_0002&mi_01&col01#8&b67a4cb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"688 HID: Vendor=E0FF, Product=0002 (Version 0.1)688 Manufacturer= A.....688 Product= Shogun Bros. Ballista MK-I Mouse688 Serial Number= Shogun Bros. Ballista MK-I Mouse688 Device at "\\?\hid#vid_0951&pid_16a4&mi_03&col02#7&1c94fa2&1&0001#{4d1e55b2-f16f-11cf-88cb-001111000030}"688 HID: Vendor=0951, Product=16A4 (Version 0.3)704 Manufacturer= Kingston719 Product= HyperX 7.1 Audio735 Serial Number= 00000000735 Device at "\\?\hid#vid_06a3&pid_0763#6&32b02881&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"735 HID: Vendor=06A3, Product=0763 (Version 1.1)735 Manufacturer= Saitek735 Product= Saitek Pro Flight Rudder Pedals735 Serial Number= Saitek Pro Flight Rudder Pedals735 Device at "\\?\hid#vid_0951&pid_16a4&mi_03&col03#7&1c94fa2&1&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}"735 HID: Vendor=0951, Product=16A4 (Version 0.3)750 Manufacturer= Kingston766 Product= HyperX 7.1 Audio782 Serial Number= 00000000782 Device at "\\?\hid#vid_0738&pid_2215&mi_02#9&114007b2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"782 HID: Vendor=0738, Product=2215 (Version 0.87)782 Manufacturer= Madcatz782 Product= Saitek Pro Flight X-55 Rhino Stick782 Serial Number= G0001495782 Device at "\\?\hid#vid_045e&pid_074b&mi_01#7&34e2812d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"782 HID: Vendor=045E, Product=074B (Version 2.96)782 Manufacturer= Microsoft782 Product= Microsoft® SiderWinderTM X6 Keyboard782 Serial Number= Microsoft® SiderWinderTM X6 Keyboard782 Device at "\\?\hid#vid_e0ff&pid_0002&mi_01&col03#8&b67a4cb&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}"782 HID: Vendor=E0FF, Product=0002 (Version 0.1)782 Manufacturer= A.....782 Product= Shogun Bros. Ballista MK-I Mouse782 Serial Number= Shogun Bros. Ballista MK-I Mouse782 Device at "\\?\hid#vid_0738&pid_a215&mi_00#8&3a741a55&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"782 HID: Vendor=0738, Product=A215 (Version 0.119)782 Manufacturer= Madcatz782 Product= Saitek Pro Flight X-55 Rhino Throttle782 Serial Number= G0000836782 Device at "\\?\hid#vid_0738&pid_2215&mi_00#9&366e73d2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}"782 HID: Vendor=0738, Product=2215 (Version 0.87)782 Manufacturer= Madcatz797 Product= Saitek Pro Flight X-55 Rhino Stick797 Serial Number=797 LogOptions=00000000 02002011797 -------------------------------------------------------------------797 ------ Setting the hooks and direct calls into the simulator ------797 --- CONTROLS timer memory location obtained ok797 --- SIM1 Frictions access gained797 --- FS Controls Table located ok797 --- Installed Mouse Macro hooks ok.797 --- Wind smoothing fix is installed797 --- All links okay (except older global weather setting method)797 -------------------------------------------------------------------797 SimConnect_Open succeeded: waiting to check version okay797 Trying to use SimConnect Prepar3D4610 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)4610 Initialising SimConnect data requests now4610 FSUIPC Menu entry added4625 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y4625 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\Default.fxml4625 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air4829 Memory in use: 788Mb, Avail=3308Mb47532 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N48000 System time = 18/12/2015 16:15:44, Simulator time = 16:15:02 (16:15Z)48000 Aircraft="Beech Baron 58 w G1000"49016 Starting everything now ...49047 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N49079 ASN active function link set49079 Ready for ASN WX radar50172 Advanced Weather Interface Enabled56047 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y65063 Memory in use: 2546Mb, Avail=1550Mb76063 ---------- Making INI JoyNames Section ----------76063 Joy#0: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0738&PID_A215\"76063 Joy#0: OEMName = "Saitek Pro Flight X-55 Rhino Throttle"76063 Joy#0: GUID = {C94D6E20-8269-11E5-8005-444553540000}76063 Joy#1: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_0738&PID_2215\"76063 Joy#1: OEMName = "Saitek Pro Flight X-55 Rhino Stick"76063 Joy#1: GUID = {C94D9530-8269-11E5-8007-444553540000}76063 Joy#2: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0763\"76063 Joy#2: OEMName = "Saitek Pro Flight Rudder Pedals"76079 Joy#2: GUID = {C94DBC40-8269-11E5-8009-444553540000}76079 -------------------------------------------------76360 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N82797 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y100750 === NOTE: not calling SimConnect_Close ...101750 System time = 18/12/2015 16:16:38, Simulator time = 16:15:14 (16:15Z)101750 *** FSUIPC log file being closedMinimum frame rate was 45.0 fps, Maximum was 50.8 fpsMinimum available memory recorded was 1539MbAverage frame rate for running time of 13 secs = 45.8 fpsMemory managed: 37 Allocs, 37 Freed********* FSUIPC Log file closed *********** -
OK, I load P3D V3, go into FSUIPC, select the Buttons + Switches tab, and whatever buttons I press on either the stick or throttle, nothing is recognised. The "Press the joystick button you wish to program" section doesn't react at all.
I haven't tried programming axes as I do that in P3D itself - I just happened to notice whilst I was exploring FSUIPC after this problem raised it's head that the Axis Assignment tab recognises input from my pedals, but not anything else.
All I wanted to do was program 1, 2, 3 and 0 as inputs to a hat switch for use with Pro ATC/X! :)
Thanks for your help
Graham
-
Apologies, both for the delay and the incorrect info. Here's the .ini file:
[General]Console=NoUpdatedByVersion=4948eHistory=5JH2QMHXRPKW42CF85ZKZInitDelayDevicesToo=NoNewInterceptTextMenu=NoUseSystemTime=NoUseMidMouseBtn=YesMouseWheelMove=NoMouseWheelTrim=NoMouseWheelTrimSpeed=1JoystickTimeout=20PollGFTQ6=YesBlankDisplays=NoFixControlAccel=NoFixMachSpeedBug=NoDeleteVehiclesForAES=YesAutoScanDevices=YesAssignJoystickIDs=YesVisibilityOptions=NoOneCloudLayer=NoCloudTurbulence=NoCloudIcing=NoGenerateCirrus=NoSuppressCloudTurbulence=NoMaxIce=-4MinIce=-4UpperWindGusts=NoSuppressWindTurbulence=NoSuppressWindVariance=NoWindTurbulence=NoTurbulenceRate=1.0,5.0TurbulenceDivisor=20,20,40,40SuppressAllGusts=NoMaxSurfaceWind=0WindLimitLevel=200WindDiscardLevel=400WindAjustAltitude=NoWindAjustAltitudeBy=2000SmoothBySimTime=NoWindSmoothing=NoWindSmoothness=2WindSmoothAirborneOnly=YesPressureSmoothness=0TemperatureSmoothness=0DisconnTrimForAP=NoZeroElevForAPAlt=NoThrottleSyncAll=NoWhiteMessages=NoShowPMcontrols=NoSpoilerIncrement=512MagicBattery=NoRudderSpikeRemoval=NoElevatorSpikeRemoval=NoAileronSpikeRemoval=NoReversedElevatorTrim=NoClockSync=NoClockSyncMins=5ClearWeatherDynamics=NoOwnWeatherChanges=NoTimeForSelect=4LoadFlightMenu=NoLoadPlanMenu=NoPauseAfterCrash=NoBrakeReleaseThreshold=75SaveDataWithFlights=NoZapSound=fireworkShortAircraftNameOk=SubstringUseProfiles=YesEnableMouseLook=NoDelayedMouseLookZoom=NoAxesWrongRange=NoTCASid=FlightTCASrange=40AxisCalibration=NoDirectAxesToCalibs=NoShowMultilineWindow=YesSuppressSingleline=NoSuppressMultilineFS=NoAxisIntercepts=NoDontResetAxes=NoInitDelay=0GetNearestAirports=NoOOMcheck=YesOOMcheckInterval=10WeatherReadFactor=2WeatherRewriteSeconds=1CustomWeatherModify=NoSimConnectStallTime=1InitialStallTime=10NormalStallTime=1LuaRerunDelay=66FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.0.3.0SimConnectUsed=3.0.0.0[JoyNames]AutoAssignLetters=No0=Saitek Pro Flight X-55 Rhino Throttle0.GUID={C94D6E20-8269-11E5-8005-444553540000}1=Saitek Pro Flight X-55 Rhino Stick1.GUID={C94D9530-8269-11E5-8007-444553540000}2=Saitek Pro Flight Rudder Pedals2.GUID={C94DBC40-8269-11E5-8009-444553540000}[Axes]PollInterval=10RangeRepeatRate=10[buttons]PollInterval=25ButtonRepeat=20,10[AutoSave]Next=1Interval=60Files=10SaveOnGround=NoAutoSaveEnabled=No[GPSout]GPSoutEnabled=No[GPSout2]GPSoutEnabled=No[WideServer]WideFSenabled=YesAdvertiseService=1Port=8002Port2=9002[sounds]Path=E:\Lockheed Martin\Prepar3D v3\Sound\Device1=Primary Sound DriverDevice2=Headset Earphone (HyperX 7.1 Audio)Device3=Acer X34-8 (NVIDIA High Definition Audio)Device4=Realtek Digital Output (Realtek High Definition Audio)[Window.AirHauler Message]Docked=200, 2457, 3572, 568 -
Sorry for the delay, my internet died earlier in the week. Now it's been resuscitated:
********* FSUIPC4, Version 4.948 by Pete Dowson *********Reading options from "E:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 8.0Module base=16700000User Name=""User Addr=""FSUIPC4 Key is providedWideFS7 Key is provided234 System time = 10/11/2015 21:54:38234 FLT UNC path = "\\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\"234 Trying E:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll234 Found it: trying to connect250 FS UNC path = "E:\Lockheed Martin\Prepar3D v3\"359 ---------------------- Joystick Device Scan -----------------------375 Product= Saitek Pro Flight Rudder Pedals375 Manufacturer= Saitek375 Vendor=06A3, Product=0763 (Version 1.1)375 Serial Number= Saitek375 Product= Saitek Pro Flight X-55 Rhino Throttle375 Manufacturer= Madcatz375 Vendor=0738, Product=A215 (Version 0.119)375 Serial Number= G0000836375 Product= Saitek Pro Flight X-55 Rhino Stick375 Manufacturer= Madcatz375 Vendor=0738, Product=2215 (Version 0.87)375 Serial Number= G0001495375 -------------------------------------------------------------------391 LogOptions=00000000 00000001391 -------------------------------------------------------------------391 ------ Setting the hooks and direct calls into the simulator ------391 --- CONTROLS timer memory location obtained ok391 --- SIM1 Frictions access gained391 --- FS Controls Table located ok391 --- Installed Mouse Macro hooks ok.391 --- Wind smoothing fix is installed391 --- All links okay (except older global weather setting method)391 -------------------------------------------------------------------391 SimConnect_Open succeeded: waiting to check version okay391 Trying to use SimConnect Prepar3D4687 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)4687 Initialising SimConnect data requests now4687 FSUIPC Menu entry added4703 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.flt4703 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.pln4703 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air4703 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.pln63906 System time = 10/11/2015 21:55:41, Simulator time = 21:54:44 (21:54Z)63906 Aircraft="Beech Baron 58 w G1000"64906 Starting everything now ...64969 ASN active function link set64969 Ready for ASN WX radar68266 Advanced Weather Interface Enabled86609 Sim stopped: average frame rate for last 23 secs = 19.9 fps198375 Sim stopped: average frame rate for last 72 secs = 19.9 fps217359 === NOTE: not calling SimConnect_Close ...218359 System time = 10/11/2015 21:58:16, Simulator time = 21:56:05 (21:56Z)218359 *** FSUIPC log file being closedMinimum frame rate was 19.3 fps, Maximum was 20.0 fpsMinimum available memory recorded was 1532MbAverage frame rate for running time of 107 secs = 19.9 fpsMemory managed: 29 Allocs, 29 Freed********* FSUIPC Log file closed *********** -
Hi,
Wondering if someone can help.
I've just built a new, powerful PC mostly for P3D V3. I have varios Orbx sceneries, and ASN for it.
I've installed the latest FSUIPC (4948), but when I go into it in P3D in the button presses section it doesn't recognise any buttons on either by X55 stick or throttle, and in the axis assignment section it only recognises my Saitek rudder pedals. However, all 3 controllers work fine in P3D?
Here's the P3D log (edited to take my name etc out):
********* FSUIPC4, Version 4.948 by Pete Dowson *********Reading options from "E:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"Running inside Prepar3D v3 on Windows 8.0Module base=172E0000User Name=""User Addr=""FSUIPC4 Key is providedWideFS7 Key is provided375 System time = 06/11/2015 16:31:28375 FLT UNC path = "\\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\"375 Trying E:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll390 Found it: trying to connect390 FS UNC path = "E:\Lockheed Martin\Prepar3D v3\"515 ---------------------- Joystick Device Scan -----------------------515 Product= Saitek Pro Flight X-55 Rhino Throttle515 Manufacturer= Madcatz515 Vendor=0738, Product=A215 (Version 0.119)515 Serial Number= G0000836531 Product= Saitek Pro Flight X-55 Rhino Stick531 Manufacturer= Madcatz531 Vendor=0738, Product=2215 (Version 0.87)531 Serial Number= G0001495531 Product= Saitek Pro Flight Rudder Pedals531 Manufacturer= Saitek531 Vendor=06A3, Product=0763 (Version 1.1)531 Serial Number= Saitek531 -------------------------------------------------------------------531 LogOptions=00000000 00000001531 -------------------------------------------------------------------531 ------ Setting the hooks and direct calls into the simulator ------531 --- CONTROLS timer memory location obtained ok547 --- SIM1 Frictions access gained547 --- FS Controls Table located ok547 --- Installed Mouse Macro hooks ok.547 --- Wind smoothing fix is installed547 --- All links okay (except older global weather setting method)547 -------------------------------------------------------------------547 SimConnect_Open succeeded: waiting to check version okay547 Trying to use SimConnect Prepar3D6234 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)6234 Initialising SimConnect data requests now6234 FSUIPC Menu entry added6250 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.flt6250 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.pln6250 E:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air6250 \\GAMINGRIG\Users\\Documents\Prepar3D v3 Files\AH.pln39672 System time = 06/11/2015 16:32:08, Simulator time = 16:31:35 (16:31Z)39672 Aircraft="Beech Baron 58 w G1000"40687 Starting everything now ...40750 ASN active function link set40750 Ready for ASN WX radar43859 Advanced Weather Interface Enabled116515 Sim stopped: average frame rate for last 40 secs = 19.9 fps133953 === NOTE: not calling SimConnect_Close ...134953 System time = 06/11/2015 16:33:43, Simulator time = 16:32:11 (16:32Z)134953 *** FSUIPC log file being closedMinimum frame rate was 19.8 fps, Maximum was 20.0 fpsMinimum available memory recorded was 1719MbAverage frame rate for running time of 46 secs = 19.9 fpsMemory managed: 15 Allocs, 15 Freed********* FSUIPC Log file closed ***********That shows all 3 controllers, so I'm a bit lost as to why they aren't working? Any help appreciated!Graham
Button presses and most axis not recognised in FSUIPC 4948
in FSUIPC Support Pete Dowson Modules
Posted
"I can only suggest uninstalling them (via the Device Manager in the Windows control panel -- uninstall including drivers, unplug them, then re-boot the PC and re-connect them. "
That seems to have done the trick - had to manually download and install the drivers, but now FSUIPC is seeing all the buttons as far as I can tell.
Thanks a lot for all your help on this Pete.
Graham