FSUIPC fails to recognise buttons pushed on my Saitek Throttle, but does recognise my Stick

[gdscei]

It has been working fine for months now, but yesterday, it started having the problem where my Saitek X55 throttle quadrant buttons and axes just aren't seen by FSUIPC. I've tried connecting the USB in another USB port, but that doesn't seem to fix the problem. In my Saitek drivers, it recognises the buttons, and in my Prepar3D options, it recognises them as well.

I've tried renaming my FSUIPC4.ini to FSUIPC4.ini.bkp to let it create a new ini, but I'm still having the same issue.

 

This is my FSUIPC4.ini atm:

[General]
UpdatedByVersion=4938a
History=NMQ0JLP5PX0Q9YQYDWPAF
InitDelayDevicesToo=No
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=No
OOMcheck=Yes
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
Console=No
FSVersionUsed="Lockheed Martin® Prepar3D® v2",2.4.11570.0
SimConnectUsed=2.4.0.0

[JoyNames]
AutoAssignLetters=No
0=Saitek Pro Flight X-55 Rhino Stick
0.GUID={8E11F2C0-9446-11E4-8001-444553540000}
1=Saitek Pro Flight X-55 Rhino Throttle
1.GUID={8E11F2C0-9446-11E4-8002-444553540000}

[Axes]
PollInterval=10
RangeRepeatRate=10

[Buttons]
PollInterval=25
ButtonRepeat=20,10

[LuaFiles]
1=BBSA330
2=rdvacarsng

[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No

[GPSout]
GPSoutEnabled=No

[GPSout2]
GPSoutEnabled=No

[WideServer]
WideFSenabled=Yes

[Sounds]
Path=G:\Prepar3D\Sound\
Device1=Primary Sound Driver
Device2=SPDIF Interface (2- FiiO USB DAC-E07K)
Device3=Digital Audio (S/PDIF) (High Definition Audio Device)
Device4=Speakers (High Definition Audio Device)

[WillClark]

Gdscei,

 

How are you? I have had the same problem. This worked for me.

Download JoyIDs here http://airgroup51.net/forum/index.php?topic=2435.0

Install the program then run it. You should see Id#1 X-55 Rhino Stick and Id#2 Rhino Throttle.

 

Double click on the throttle (should highlight green and click on Id#3 to move it there

Repeat the same procedure to assign the stick to Id#2

 

Restart P3D or FSX and hopefully that will fix your issue. Best of luck and I hope that helped...

 

Take Care...

[gdscei]

Gdscei,

 

How are you? I have had the same problem. This worked for me.

Download JoyIDs here http://airgroup51.net/forum/index.php?topic=2435.0

Install the program then run it. You should see Id#1 X-55 Rhino Stick and Id#2 Rhino Throttle.

 

Double click on the throttle (should highlight green and click on Id#3 to move it there

Repeat the same procedure to assign the stick to Id#2

 

Restart P3D or FSX and hopefully that will fix your issue. Best of luck and I hope that helped...

 

Take Care...

 

Hello Will,

 

I apologise for the late response - haven't been simming that much lately.

This fix worked for me! Thank you very much!