[[RESOLVED]pmdg737 play with bumpy or jitter]

Hi, how do I use locked view?

 

Also , re: flaps - I started recording in flight so it wasn't from cold and dark. I also did a test recording without starting cold and dark and the flaps recorded then, but they didn't second time around. Also there is the issue of it stopping recording spontaneously three times on approach.

[[RESOLVED]pmdg737 play with bumpy or jitter]

Ok, spoke too soon...

Just recorded a flight from just before taxi in my PMDG to cold and dark at the destination gate. Again flaps are not registered at the beginning during taxi and the motion is very juddery again with 'sound off' flicking on and off.. also hasn't registered gear up

 

Also just tried three times on approach to record and it just stopped spontaneously each time after a few minutes

[[RESOLVED]pmdg737 play with bumpy or jitter]

16 hours ago, FabioMerlo said:

Hi,

thank you for your purchase. Performance was increased from version p3d 4.2 .

For Sound off message i ll check into and i ll let you know. For cold and dark situation i advice not use because fcr record and play the most important vars but not all parameters for 3rd party addon.For wind noise it is udible only in certain occasion but since p3d 4.2 it is much much better!

keep in touch!

f

Hi Fabio

 

Thanks very much for this. I have upgraded P3D to v 4.2 and performance is definitely better, but I am still getting no flaps 😞 even when I wait 20 seconds after recording for the PMDG systems to initialize on playback before setting flaps...

 

EDIT!: It works when I start with the default flight then open the file... thank you!!

[[RESOLVED]pmdg737 play with bumpy or jitter]

Hi Fabio, I'm having a similar problem.

P3D v 4.1.7, PMDG 737NGX.

I recorded a file from cold and dark to cold and dark; waited for the systems to initialize, hit record and went from there. Stopped recording after I switched off the battery at the destination gate.

I closed P3D, opened default flight, then opened the FCR file over that. I have the following issues:

• Stuttery playback with the 'sound off' message flickering in the rop right corner. I have tried changing to 30fps and this did nothing
• Chocks stay on the wheels
• No power to the cockpit
• No flaps
• Really annoying squealing wind noise like you get when you do the standard 'Instant Replay' on the PMDG

Let me know what I can try

Many thanks

[Entering a hold (E Jets)]

I take it ... there isn't a way of doing this, therefore there aren't any videos on the subject

[Activate Go-Around? (E Jets)]

Using the TOGA function built into the EJet. Configurator - Joystick - TO/GA button - this button

[Entering a hold (E Jets)]

On 3/20/2018 at 6:34 PM, FeelThere Ariel said:

Hello Jon, if this is not explained in the manual there are multiple videos on Youtube on this subject. 

Regards ,

Ariel 

Hi Ariel

I've looked on Youtube, can you point me in the direction of said videos? That would be helpful - *

https://www.youtube.com/results?search_query=feelthere+e+jets+entering+a+hold

I can confirm it isn't explained in your manual

Many thanks

Jon

[Activate Go-Around? (E Jets)]

Hi,

I've made a few GA attempts now and I'm still trying to figure out how to engage TOGA on Go Around. If I am fully manual on approach and I engage A/T then TOGA, or the other way round, the rating mode above N1 keeps flashing extremely quickly between 'CLB-1' and 'GA', never actually going into GA mode. Is there something I'm missing here?

Thanks,
Jon

[Entering a hold (E Jets)]

Hi,

Does anybody have any detailed information on how to use the 'HOLD' page in the ERJ175 FMC? For example how to change the ENTRY type?

Thanks

Jon

[Popping Sound]

crackling shouldn't happen unless it's 1975 so IMO it's problematic. on high fidelity audio equipment it is really obvious and irritating

[Popping Sound]

https://nofile.io/f/4QSh9049uyz/FINAL.mp3

please listen to this file.

it turns out it's not actually rhythmic (although it usually is) - in this recording it's random but frequent. Also at the minute mark you can hear that it disappears as I change to external views which means it is a problem with the internal sounds.

I've tried it on three different audio outputs and despite what I said I can actually hear it even worse on my cheap speakers!

[Popping Sound]

On 2/20/2018 at 5:13 PM, FeelThere Ariel said:

But is it audible on speakers too (at least very slightly)? If it is not, then it is likely some driver error. 

 

 

I'm afraid I haven't got speakers high quality enough to deliver that level of detail (my headphones are Sennheiser 595s, my speakers were £5). Also both are running out of the same 3.5mm jack anyway so yes it will be coming out of the speakers and as I say it's happened before on a totally different system. 

[Popping Sound]

On 2/16/2018 at 4:33 PM, FeelThere Ariel said:

Jk, is this audible only with headphones?

Ariel

Well only because headphones are a higher quality source of audio than my speakers. It's not the headphones - has only ever happened on Flight Sim with various aircraft and I did solve it once years ago but can't remember how. 

[Popping Sound]

Using FT EJets for P3D v4.

When the engines are spooled up, there is a slight popping sound as the sound file loops. I've had this on other aircraft too in the past 15 years of simming and can't remember what the solution was if any - can anybody advise?

Audible with headphones.

Thanks

[Embrear 175 195 feel there prepad 3d v4.1]

Same problem for me, using v4.1.7.22841

https://imgur.com/XYU7fD3

Log attached.

Many thanks

e170.log

EDIT: How very interesting... this actually only happens with my FlyBe livery (https://library.avsim.net/download.php?DLID=197813), nothing else. Please disregard for now whilst I troubleshoot...