dano
-
Posts
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by dano
-
-
A simple toggle switch is wired as below it all works with Prosim737 with on and off positions.
It’s got me baffled.
I have no repeat on .
the toggle switches on my overhead for on - off all have a common middle terminal with on thermals each side as per picture.
depending on with terminal you pic and which way you face the switch for on position.
if your saying I have to use all three terminals that means I have to use another port input on the pokeys card so FUIPC sees it as a seperate input to switch off.
prosim you do not have to do this it just knows when the switch disconnects the circuit on the pokeys card and triggers the off position in the sim.
-
If I do that the pmdg switch flicks on and off in a blink off and eye .
-
-
No logging events with what exactly. Fsuipc or pokeys software?
But it’s as if the FSUIPC a does not see the unsealed switch return from the pokeys card .
the switch is wired using 2 wires one to ground and the other to a port on the card like most interfaces.
-
So I’m using mouse flag x20000000 for left click to simulate in PMDG . It turns the switch on .
but it won’t work to turn it off.
The only way to turn it off is to -on-off the switch again and it will return to the off position in the sim again. The on signal turns it off again to original position.
so in other words
I have to go on-off for on
and on- off for off.
iff you know what I mean 😭.
-
So what about a toggle switch like the taxi light.
what mouse click parameter would you use to switch on
and more importantly switch back of again?
-
I’m doing some testing now in p3dv5 with PMDG 737 ngx u .
So I have activated the pokeys card joystick function as I have 3 off these operating my overhead switch inputs .Now FSUIPC sees the switches when you toggle them .
gotten to this point
Test 1
Taxi light switch = event ID 69749
Open FSUIPC put it in under the pokey input switch that I select
Under parameter I enter 2 and on switch release I enter 1 .
Now go back into the sim and test my overhead taxi switch .It turns on , then flick it off and nothing happens in the PMDG .
it just stays on.
Tried a few combinations of parameter numbers and no luck with the switch returning to off position.any idea s
-
Vpilot sorted Command line incorrect correct one below and unticked admin rights also thanks John for your help
RunIf2=READY,KILL,"C:\Users\FLIGHTSIMPC1\AppData\Local\vPilot\vPilot.exe" -host -voice
-
ok Prosim is working NO ADMIN RIGHTS and its fine .
Vpilot still working on it
-
So here s my INI file for FSUIPC 6 with P3DV5 everthing works in the game and fires up as it should with the same commands .
-
Right so I have run v pilot and prosim with admin rights still no change and log file now has error 740 on both 🤷♂️FSUIPC7.log
-
-
cheers john will report back
-
Hi John does fsuipc7 recongnise switch inputs from a pokeys card wanting to interface PMDG over head with event ids ect but the overhead i built is all connected via pokeys cards direct to prosim737 at the moment.
-
-
Just want to know the correct path for starting prosim main program by Fsuipc.
my prosim folder is located on my desktop and I copy and paste the path of its location but for some reason fsuipc does not open it automatically.
I can get other programs to open but not prosim and I don’t know why.
I use the same method when I play P3Dv5 with FSUIPC 6 and it opens fine .
is there something missing here
-
I understand all that Pete .
my question is with this line
RunIf1=READY,KILL,AM=82,D:\FS2002\WeatherSet.exe
you have READY and KILL on the same line .
how can you have 2 commands on the same line .
or does it act as 2 seperate commands when opening and closing P3D?
-
So I noticed in some of the command lines to run a program using ‘kill ‘and ‘ready ‘on the same command line .
how does it know whether to open or close the assigned program when you have both on the same line .
if you know what I mean .
-
Right this is all new to me so I give it a shot
I will keep you posted
thanks Pete
-
Ok I’ll have a read Pete.
So to be clear you can assign a cpu core using fsuipc for prosim to use ?
-
Right ok can you tell me how you get fsuipc to run prosim
how is that done .
And how did you assign prosim a core besides core ‘0’
did you do put a Affiniy mask in p3d config to reflect what core s did what.
cheers
-
So prosim v2 main program on main pc with p3d and all display s cdu mcp sounds ect .leave it on client .
is there anything different in settings ie. ports addresses ect I need to worry about when swapping prosim over to main p3d pc.?
or it will just connect over network?
cheers
-
Hi Thomas I will try the config setting let you know
-
1 hour ago, Thomas Richter said:
Hi,
in WideClient in [Config] secrion try the setting
ButtonScanInterval=0
as ProSim uses DirectX controls for their input.
Also please provide the log files, what ever crashes will have some usefull information why and when . . .
Thomas
Are the log files in the modules folder Thomas?
Pokey card PMDG event ID programming
in FSUIPC Support Pete Dowson Modules
Posted
Sorry for not getting back to you earlier but I’m aware now that fsuipc has to have 2 seperate input signals for a on -off so I’m in the process of wiring up extra inputs for each switch tgT needs a off position recorded in fsuipc .
one more thing.
will the event ID s for pmdg work in fsuip 7 and MSFS?