[Embraer E-Jets v3 MCP Pushbuttons Don't Work]

8 hours ago, Biggles2010 said:

If you have a controller with available pushbuttons, it can be done using the paid version FSUIPC. You can use the mouse macro facility to identify and assign any of the working Ejet button functions to buttons on your controller. The later versions of P3D were changed to allow this process to work very effectively. You can add additional usb controllers or interfaces to allow more functions to be controlled this way.

Thank you.  I use to use FSUIPC with  FSX so, I'm pretty familiar with it.  

[Embraer E-Jets v3 MCP Pushbuttons Don't Work]

On 4/6/2020 at 9:01 AM, scoobflight said:

Have you read the CasePlane instructions concerning you can set its functions...see beginning on page 68 -

https://oldprop.com/documents/manuals/manual.php?pid=8

 

You may also have a setting with the mouse, through windows, that is creating a redundant conflict.  This is known to happen. Example -

 

Scoobflight,  I'm having the same issue with ChasePlane.  ChasePlane uses the center mouse button + Wheel to zoom in and out.  It's much needed for ChasePlane.  There is no other to zoom in ChasePlane with out the mouse center button.   Is there a way in the Feelthere E-jet to set Mach/Speed and Barro/STD toggle push to something other than the mouse center button?  

 

[Feelthere Embraer E170/190 v3 SP2 P3D v5]

On 2/5/2021 at 8:20 AM, scoobflight said:

V3 of the Ejets was made for P3DV4.

Using the simulation on P3DV5 is hit and miss along with some having success and others not (shows how each system: GPU, addons, settings, etc; makes a huge difference).

I just now noticed lights won't turn on during the day.; it has to be night.  All this time, I didn't know this.  Part of my problem is that I was trying to get the lights on at dusk and it still was not night "enough", I guess.   They all work - not the best, but better than nothing.

 

Thanks

[Feelthere E170/190 v3 SP2 P3D v5 Configuration Utility not saving]

On 2/5/2021 at 8:20 AM, scoobflight said:

Are you running the utility as admin?

Thank you so much.  YUP, that was it.

[Feelthere E170/190 v3 SP2 P3D v5 Configuration Utility not saving]

Hi All,

Changes with Joystick buttons, and standard TCS, Autopilot Quick Disconnect, TO/GA as well as starting with engines off will not save.  I hit OK, and this does not save changes.   W&B, fuel changes do take for some reason when the other things do not.

Anyone have a fix for this?

Steve

[Feelthere Embraer E170/190 v3 SP2 P3D v5]

Hi All,

 

VC Cockpit lights do not work.  I have the FSLabs Spotlights Addon. Disabling or enabling this has no effect, so I don't think this is interfering. I also have GSX installed.  Any advice would be greatly appreciated.

Steve

 

P3D v5  FeelThere E-jets 170/190 v3 Sp2.

RTX 2080 Super, i9 10900K, Windows10

[E-Jets v3 SP2 P3D v5 no cockpit lights]

For some reason it doesn't work for me.

 

[E-Jets v3 SP2 P3D v5 no cockpit lights]

I recently loaded E-Jets v3  E170/190  and using with P3D v5.  I'm not able to turn on any cockpit lights (i.e. Dome, panel flood, pedestal, overhead).   Does anyone have a work around for this?

 

I just installed SP2 and the problem is the same.

 

Thanks in advance

[How to Install Liveries for E170 E190 v3 P3D v5]

Thank You.  Yes this helps.   

[E-Jets Emabraer 175 TOGA not activating]

Sorry for the incredibly late reply.  Thank you scoobflight.   I had figured this out and had not checked back.   

[How to Install Liveries for E170 E190 v3 P3D v5]

Hi All,

I downloaded the E190 JetBlue livery files.   Now, how do I install this?  Where do I place these files?   Thanks in advance for your help.

 

I resolved this in a "good enough for government work" fashion.  See below.  However, is this the best aprpoach?

So far, I have just replaced the the "texture.house" files on the stock "feelthere PIC 190" folder with the JetBlue livery files.  When I started P3D, the plane scheme was partially black, as if the plane was representing itself at night even though the time was set to "day" in the sim.  Based on another post I read,  I also replaced the last two lines of the "texture" CFG files with:

fallback.4=..\..\feelThere PIC E170\sharedtexture
fallback.5=..\..\feelThere PIC E170\sharedtexture\lighting

This corrected the dark paint scheme issue.

 

So, this is resolved except for now if I want to see the stock Feelthere livery, I can't.

 

EMBRAER E-JETS E170 AND E190 V3   P3D v5

 

 

[E-Jets Emabraer 175 TOGA not activating]

I am running the E-Jets V2 Embraer 175  on FSX.   I can't seem to be able to activate TOGA on the ground before takeoff to get my takeoff crossbars.  I tried using the default key commands CTR+SHFT+G.  I also tired to left click on the hidden button above the A/T on the guidance panel.    TOGA works with other planes on the FSX.  

 

I am a real-world Embraer 175 pilot and have loaded the Takeoff Data Set , and V-speeds for Takeoff.

 

Does anyone have this problem?   Any solutions out there?