pat2807

Hi Pete, excuse me but I noted that in the log file from notebook to desktop a connection and soon after a disconnection for time out, therefore for a short time the connection is on than goes in off for time out. -------------------------------------------------------------------------------- Attempting to connect now 891 Server = EMILIO-ARFXKHD9 951 Trying TCP/IP host "EMILIO-ARFXKHD9" port 8002 ... 951Okay, IP Address = 192.168.1.10 4466 Connection made okay! <<<<<---------------------- 40698 Timed out response: connection assumed lost! <<<<--------- 40698 Ready to try connection again ------------------------------------------------------------------------------- after repeat ever the same cycle!!!!!! If it is problem of networking probably it could not possible to activate a short time connection, infact the notebook would not connect at all!!!! What does mean ? Perhaps is it possible to modify some parameter in order to mantain ever the connection? In technical documentation i read that it's possible to activate a detailed dumping. Do you think that it can help in some way? Thanks

Hi Pete, thanks for your suggestions, but while you answered me i did a systematic test about only your widefs without any other software. I registered LOG and INI files during my test steps on both directions. I attach a zip file containing the dumped files. I would like that you will see these because I think that probably you can find the problem. I thank you again for your courtesy, but I think that these items will be useful also for you. Emilio LOG Files.zip

Hi Pete, I just supposed your think, infact I deactivated Xp firewalls on both Pcs, but nothing. I have tried another test, i.e. I start FS9 on notebbok and I connected Wideclient from Desktop. In this way the p8r software runs fine. Now I try to understand where is the difference of Lan connections betwenn two PCs. I have another suspect. In the desktop is installed also FSX, but when I tested this didn't run. Boh!!!! I wrote also to development team of p8r software. I'm waiting for some help. If I will be able to remove problem i will inform you. Thanks. Bye, Emilio.

Hi Peter, thank you. I try again and I attach log files. I'm waiting for helping. Thanks LOG Files.zip LOG Files.zip

Hi Peter, I'm trying to use Widefs with the FMCA Software by P8R Group. From a client PC with Wideclient running I have this error conenction found in LOG File: ********* WideServer.DLL Log [version 6.71] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 16/12/06, Time 16:41:57.718: Server name is EMILIO-ARFXKHD9 487672 Initialising TCP/IP server 487859 Initialising IPX/SPX server 487859 IPX/SPX socket() failed [Error=10047] Address family not supported by protocol family 487859 Failed to start IPX/SPX Server 487859 Initialising UDP/IP server 488156 Broadcasting service every 1000 mSecs 499031 Restarting service due to total lack of use 499047 Failed to start IPX/SPX Server 8847219 Incoming connection Accepted ok (skt=3496) TCP 8847594 Connected to computer "KT-HAU11R2HXKPP" running WideClient version 6.710 (skt=3496) TCP 8847609 Auto send stopped before sending all data (0 of 359 sent), Error=10038 (skt=3496) TCP 8849703 Auto send stopped before sending all data (0 of 266 sent), Error=10038 (skt=3496) TCP .......... Can you help me? Thanks Emilio.