[FSUIPC7 closing shortly after MSFS running [Windows 11].]

Yep. Ini file amended. Chris

[FSUIPC7 closing shortly after MSFS running [Windows 11].]

Well John, I think you've cracked it! I tried again the VC++ files but no luck. However your new version seerms to be working just fine and persisting the whole session.

Thanks again for your patience.

Cheers. Chris

[FSUIPC7 closing shortly after MSFS running [Windows 11].]

Yesterday a manual launch stayed for a whole flight 2 hours+

Today I cannot trick it into hanging around! I've tried all of the above hints but to no avail. As a reminder I am running Windows 11.

I enclose my short log file if it helps.

Chris

FSUIPC7.log

[FSUIPC7 closing shortly after MSFS running [Windows 11].]

And that seems to have worked, John. I'll test further but we may have solved it.

Thanks again.

Chris

[FSUIPC7 closing shortly after MSFS running [Windows 11].]

That's interesting. I'd just installed the preview edition of Windows 11 this week. It has behaved well so far - but let's see.

I'll try what you suggest anyway and report back. Thanks

Chris

[FSUIPC7 closing shortly after MSFS running [Windows 11].]

I've done that and the FSUIPC menu bar reains on screen. However, when I clicked axes it tells me I am not connected to MSFS. Then it stops responding.

File attached. Good luck!

Chris

FSUIPC7.log

[FSUIPC7 closing shortly after MSFS running [Windows 11].]

Hi. After a new install of MSFS I have this problem. I have looked through the forum but cannot find an answer. Simply put, Whether I let FSUIPC7 auto-run or launch manually, it appears to close a few moments after MSFS presents its Home screen. I see from the log file that it reports "  43078 MSFS no longer running - exiting" but I assure you it is still running normally!

I have uninstalled FSUIPC7 (including the ini file) and re-installed twice. Can you help please?

I attach the log and ini files

Chris

FSUIPC7.log FSUIPC7.ini

[CRJ and FSUIPC]

And that's what I've just done!

Except I've mapped both(all) throttles to the one lever for now. i.e. Throttle Axis Set Ex1

Thanks again for your expertise.

Chris

[CRJ and FSUIPC]

That worked. Thanks.

I just changed the lua "value" setting as suggested.

FYI it is the Saitek quadrant  I'm using.

Cheers

Chris

 

[CRJ and FSUIPC]

Hi

Well I don't really understand what we're doing here but I've copied this throttle lua route exactly and the throttles are now moving - but in reverse.

Any advice?

Chris

[CRJ and FSUIPC]

Hi

Can FSUIPC be used with the new Aerosoft CRJ for MSFS?

Having set it up for other aircraft and "turned off" the in-built MSFS Control, I really don't want to abandon this set-up just fly this new aircraft!

It seems particularly the throttle from what I read elsewhere.

Cheers

Chris

[After Latest patch FSUIPC not working]

Since MSFS patch 5(?) I was suffering CTD's at launch every time - until the latest hotfix to the patch.

But now, although the hotfix has cured that problem, FSUIPC is not having any effect. It appears to launch ok and the console is present but the sim is unresponsive. It was working as intended before this (mandatory) patch.

Am I alone in this?

Cheers, Chris

Edit - I see from the log that FSUIPC7 has expired. That probably explains it!

I will pay for the official version as soon as I'm sure MSFS has settled down and is useable...

[WideFS registration]

Just to close this.

I solved my problem - it was an email address mistake on my part.

Thanks for your help

[WideFS registration]

Hi Pete,

My email address was chris-allen@dsl.pipex.c*m but in recent years is chris@allenmail.o*g. Does this help?

Chris

[WideFS registration]

Hi Peter,

I've installed the new FSUIPC5 into P3Dv4 no problem but I can't register my WideFS. I've tried 2 "old" codes but each time they are rejected. I've tried inserting the lines you suggest in another topic but no joy. Do you think I'm missing a trick here? Latest Key not now attached in case it helps

Can you advise please?

Cheers

Chris

 

[Prepar3D v3 not closing down fully.]

Yes Peter - latest ASN installed.

Cheers

Chris

[Prepar3D v3 not closing down fully.]

Hi Peter,

Well I've done that and, of course, the problem is not now happening. I've re-booted and still all is ok. I've added Traffic Tools back in and it's still fine.

 

I should stress that previously, although the sim appeared to close correctly, the exe was persisting permanently (not just 30secs). Even added instances hung around too,

 

So thank you for your forbearance!

I shall of course leave the logging on for the time being

Cheers

Chris

 

The log was as below:

********* FSUIPC4, Version 4.946 by Pete Dowson *********
Reading options from "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0
Module base=64480000
User Name="chris allen"
User Addr="chris-allen@dsl.pipex.com"
FSUIPC4 Key is provided
WideFS7 Key is provided
      266 System time = 06/10/2015 14:39:52
      282 FLT UNC path = "\\CHRIS-PC\Users\Chris\Documents\Prepar3D v3 Files\"
      282 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll
      282 Found it: trying to connect
      297 FS UNC path = "\\CHRIS-PC\Lockheed Martin\Prepar3D v3\"
      563 LogOptions=00000000 00000051
      563 -------------------------------------------------------------------
      563 ------ Setting the hooks and direct calls into the simulator ------
      563 --- CONTROLS timer memory location obtained ok
      563 --- SIM1 Frictions access gained
      563 ASN active function link set
      563 --- FS Controls Table located ok
      563 --- Installed Mouse Macro hooks ok.
      563 Wind smoothing may be by ASN, not FSUIPC, if it is running
      563 Will switch smoothing action when ASN starts/stops
      563 --- All links checked okay
      563 -------------------------------------------------------------------
      563 SimConnect_Open succeeded: waiting to check version okay
      563 Trying to use SimConnect Prepar3D
     3532 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0)
     3532 Initialising SimConnect data requests now
     3532 FSUIPC Menu entry added
     3547 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y
     3547 \\CHRIS-PC\Users\Chris\Documents\Prepar3D v3 Files\Mooney EGNM.fxml
     3547 \\CHRIS-PC\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\Mooney_Acclaim\Mooney_Acclaim.air
     3688 Memory in use: 721Mb, Avail=3375Mb
    23750 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N
    24375 System time = 06/10/2015 14:40:16, Simulator time = 14:39:56 (13:39Z)
    24375 Aircraft="Mooney Acclaim With G1000"
    25375 Starting everything now ...
    25407 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N
    26703 Advanced Weather Interface Enabled
    33703 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y
    37157 Deactivated for PID=3756, "explorer.exe"
    37157 Lost focus to PID=3756, "explorer.exe"
    38360 === DLLStop called ...
    38360 === About to kill my timers ...
    38563 === Restoring window procs ...
    38563 === Unloading libraries ...
    38563 === stopping other threads ...
    41172 === NOTE: not calling SimConnect_Close ...
    41172 === AI slots deleted!
    41172 === Freeing button memory ...
    41172 === Closing my Windows ...
    41172 === Freeing FS libraries ...
    42172 === Closing devices ...
    42172 === Closing the Log ... Bye Bye! ...
    42172 System time = 06/10/2015 14:40:34, Simulator time = 14:40:05 (13:40Z)
    42172 *** FSUIPC log file being closed
Minimum frame rate was 47.6 fps, Maximum was 50.7 fps
Minimum available memory recorded was 32768Mb
Average frame rate for running time of 10 secs = 46.1 fps
Memory managed: 8 Allocs, 8 Freed
********* FSUIPC Log file closed ***********
 

[Prepar3D v3 not closing down fully.]

Hi Peter,

I thought it best to pick up this topic from the P3D forum here.

 

As I had stated, on closing P3D v3, in Task manager Prepar3D.exe is still running with the message "One or more threads of Prepar3D.exe are waiting to finish I/O"

Additional launches leave additional copies running!.

 

If I remove FSUIPC.dll this does not happen and it closes fully.

I've tried deleting the whole contents of Modules (apart from .ini and .key) and reinstalling FSUIPC. Same effect.

 

I've looked at the DLL.xml file and deleted what I had added - Traffic Toolbox - but no change still.

I have ASN installed on another pc and have only added the QW BAE 146 to v3 and PrecipitFX

 

Do you have any further thoughts please?

 

Thanks

Chris

(A registered FSUIPC user from the very start!)

[Saved Flights]

Thanks Pete,

Oh well, back to the drawingboard!

I'll experiment further and try to spot what is or isn't happening...

Cheers

Chris

[Saved Flights]

Hello Peter,

I seem to remember a previous version of FSUIPC inhibiting the loading of newly saved default flights.

Could this be happening again with 4.09?

Or is it me?

Cheers

Chris