Flyer626

interesting since my controllers in P3D are not enabled and I will have to look where in my Hotas joystick that assignment since I don't see it and I have checked, but I can see now why this is happening.

hope this helps, it shows what happens. I included the text file to highlight the action consolelog.txt FSUIPC6.log

thank you

I know this wayward signal is only coming from my Thrustmaster T-Flight Hotas 4 joystick. It's only on the initialization of the aircraft and never happens again once setting is reinstated. I will have to figure out how to do open log while sim is open and see what is happening. I will also check the autobrake settings but I only do it manually by actually turning knob in aircraft. No buttons are set up for that. Thanks for trying.

thanks for info. Now back to my original issue with my speedbrake issue. I have reinstalled the QW 787 as recommended by QW support but it didn't change anything. I changed my qw config file to include a new panel state so the lights are now correctly configured upon startup. Still when I touch a joystick button I promptly lose my speedbrake setting again. Have you had a chance to review my axis log for the speedbrakes, so as to see if there is a clue as to why this happens. Thanks

here are the new logs you requested with the axis box checked. Those spoilers logs that are not yours are me trying to using the GoFlight Interface tool for my GoFlight TQ6 Throttle set. It did not help and I will not open that app again. The software has not been updated and it didn't work anyway. FSUIPC6.ini FSUIPC6.zip

ok, done

I did change it, not sure why it is not appearing on your end. My aircraft new liveries are having the settings installed upon start up. I will now follow your recommendations and wait for QW to respond. [Profile.787] 1=QualityWings 787 this is in my settings. [Profile.787] 1=QualityWings 787 2=QualityWings 787-8 Air Europa 3=QualityWings 787-9 Turkish Airlines 4=QualityWings 787-9 Hawaiian Airlines N789HA 5=QualityWings 787-8 ICELANDAIR –SATCOM 6=QualityWings 787-9 LOT Polish Airlines SP-LSC Special Livery-SATCOM 7=QualityWings 787-9 Lufthansa D-AIDR -SATCOM 8=QualityWings 787-9 LOT Polish Airlines SP-LSA -SATCOM 9=QualityWings 787-9 Norse Atlantic Airways (LN-LNO) -SATCOM 10=QualityWings 787-9 El Al 11=QualityWings 787-8 Alaska Airlines (N467AS | 2016) -SATCOM 12=QualityWings 787-9 British Airways 13=QualityWings 787-8 British Airways 14=Boeing 787-8 Scandinavian Airlines (OY-KDK) 15=Boeing 787-9 Scandinavian Airlines (OY-KDL) 16=Boeing 787-10 Scandinavian Airlines (OY-KDM) My current setting, if this is wrong tell me.

I have also put in a question at QW's support forum as to why on start up in 5.3 with no settings applied the speedbrakes are extended with the engines running. This is their default setting and it does not make any sense to be like that. I am trying to cover as much ground as to why this happening where I can. A reply from QW takes quite a while to get a response.

hope this helps FSUIPC6.log FSUIPC6.zip

ok, that might be a maybe or maybe not. I have done hours of trouble shooting and this if what I have found out. In regards to the settings, the only one that is lost/disconnected is the spoilers/speedbrakes when this incident occurs, the rest are still functioning correctly. If I misinformed you about this sorry I did not realize it. Second on the profile setting it only works for -9 model, the -8 and -10 models those liveries have to be set manually. That is "based upon the 787" setting. The funny thing is when a new model is set this way the issue does NOT occur, press a button the speedbrakes/spoilers setting is still working. If I reload that model when I start up sim again, the incident does happen. The only thing different about the settings of spoiler is the reverse checkbox is ticked, the rest of my settings that box is not ticked.. don't if this means anything. Regards, hope this helps.

yes that is what I meant, and you have my files. My assignments are gone. Why the speedbrakes extend when this happens I have no idea. Have a good weekend. If you require another log file just ask.

Once I restore my settings, it does not happen again for that flight.

My settings are being deleted when I hit almost any other buttons on my joysticks, which are my yoke and the hotas joystick. Just happened again when I pushed button to extend flaps from my hotas joystick. What happens is my speedbrakes extend and I have now lost all my settings

ok, here they are zipped. Sorry for the confusion. Will do profile in FSUIPC. FSUIPC6.zip FSUIPC6 (2).zip

I have made all the changes as requested but still have same issue and it is only happening when I use the button to change from inside cockpit view to and external view. That button is set up in FSUIPC. Please verify the path for the 787 profile location, there are two places, the 787 cfg file or is it in the 787 simobjects airplane files. My file size has now exceeded your limit, is there anyway I can email them to you as an alternative.

I have all my settings correctly inputted and on startup they are now there. The problem is now some sort of conflict that I just cannot resolve, As soon as hit another button I lose my settings and the speedbrakes extend. Every axis has been deleted from P3D controls and key entries too. Spoilers are configured correctly in FSUIPC for my QW 787 and work like they should. Cannot find any conflicts for spoilers anywhere in my system and why do I then have to just reinstall settings with just one click upon losing them. FSUIPC6.ini FSUIPC6.log

ok,, I think have resolved this issue. The installation is in P3Dv5 add-ons in my own user document file which seems to work fine there. The first problem was I had two installations at same time so I uninstalled them and backing up my file first with settings. Reinstalled in my user documents add on folder and everything is working better, just still fixing some conflicts with p3d control settings. Is my own document file where the add on's are in and ok place.

I might need a little help here locating what folder they are now in, I don't see a module folder anymore in my 5.3 installation. I found this one but not sure where the other one is. This is unzipped because it is not very big. FSUIPC6.log

using P3Dv5.3 with version 6 of this app. I have to reload the settings of aircraft, in my case qw787 everytime it starts up just by checking the tick box in the settings. Why doesn't it save it for startup like it used to do.