belgiumflightsimpilot

I think this stopped working after some upgrade of fsuipc on my end. thanks for the help

well I start msfs2020, fsuipc auto starts I start a flight for example the Ini a300 or fenix A320 and the profile is not loaded. I have to reload the profile before I get the buttons to function. FSUIPC7.ini

hi is it normal when using profiles, everytime you load an aircraft you have to go in the software an manual select the profile before the buttons become active?

My setup for fenix autho pilot 56=RD,7,CPFNX320_FCU_AP1_PUSH,0 -{Preset Control}- 58=CP(+D,18)(-D,17)(-D,16)(-D,19)(-D,20)64,0,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 59=CU(+D,18)(-D,17)(-D,16)(-D,19)(-D,20)64,0,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 60=CP(+D,18)(-D,17)(-D,16)(-D,19)(-D,20)64,1,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 61=CP(+D,18)(-D,17)(-D,16)(-D,19)(-D,20)64,2,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- 62=CU(+D,18)(-D,17)(-D,16)(-D,19)(-D,20)64,2,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- 63=CP(+D,18)(-D,17)(-D,16)(-D,19)(-D,20)64,3,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- 64=CP(+D,20)(-D,17)(-D,16)(-D,19)(-D,18)64,0,CPFNX320_FCU_ALTITUDE_KNOB_INC,0 -{Preset Control}- 65=CU(+D,20)(-D,17)(-D,16)(-D,19)(-D,18)64,0,CPFNX320_FCU_ALTITUDE_KNOB_INC,0 -{Preset Control}- 66=CP(+D,20)(-D,17)(-D,16)(-D,19)(-D,18)64,1,CPFNX320_FCU_ALTITUDE_KNOB_INC,0 -{Preset Control}- 67=CP(+D,20)(-D,17)(-D,16)(-D,19)(-D,18)64,2,CPFNX320_FCU_ALTITUDE_KNOB_DEC,0 -{Preset Control}- 68=CU(+D,20)(-D,17)(-D,16)(-D,19)(-D,18)64,2,CPFNX320_FCU_ALTITUDE_KNOB_DEC,0 -{Preset Control}- 69=CP(+D,20)(-D,17)(-D,16)(-D,19)(-D,18)64,3,CPFNX320_FCU_ALTITUDE_KNOB_DEC,0 -{Preset Control}- 70=CP(+D,16)(-D,17)(-D,20)(-D,19)(-D,18)64,0,CPFNX320_FCU_SPEED_KNOB_INC,0 -{Preset Control}- 71=CU(+D,16)(-D,17)(-D,20)(-D,19)(-D,18)64,0,CPFNX320_FCU_SPEED_KNOB_INC,0 -{Preset Control}- 72=CP(+D,16)(-D,17)(-D,20)(-D,19)(-D,18)64,1,CPFNX320_FCU_SPEED_KNOB_INC,0 -{Preset Control}- 73=CP(+D,16)(-D,17)(-D,20)(-D,19)(-D,18)64,2,CPFNX320_FCU_SPEED_KNOB_DEC,0 -{Preset Control}- 74=CU(+D,16)(-D,17)(-D,20)(-D,19)(-D,18)64,2,CPFNX320_FCU_SPEED_KNOB_DEC,0 -{Preset Control}- 75=CP(+D,16)(-D,17)(-D,20)(-D,19)(-D,18)64,3,CPFNX320_FCU_SPEED_KNOB_DEC,0 -{Preset Control}- 76=CP(+D,19)(-D,17)(-D,20)(-D,16)(-D,18)64,0,CPFNX320_FCU_VS_KNOB_INC,0 -{Preset Control}- 77=CU(+D,19)(-D,17)(-D,20)(-D,16)(-D,18)64,0,CPFNX320_FCU_VS_KNOB_INC,0 -{Preset Control}- 78=CP(+D,19)(-D,17)(-D,20)(-D,16)(-D,18)64,1,CPFNX320_FCU_VS_KNOB_INC,0 -{Preset Control}- 79=CP(+D,19)(-D,17)(-D,20)(-D,16)(-D,18)64,2,CPFNX320_FCU_VS_KNOB_DEC,0 -{Preset Control}- 80=CU(+D,19)(-D,17)(-D,20)(-D,16)(-D,18)64,2,CPFNX320_FCU_VS_KNOB_DEC,0 -{Preset Control}- 81=CP(+D,19)(-D,17)(-D,20)(-D,16)(-D,18)64,3,CPFNX320_FCU_VS_KNOB_DEC,0 -{Preset Control}- 82=UD,7,CPFNX320_FCU_AP1_RELEASE,0 -{Preset Control}- 83=CP(+A,17)(-A,18)D,0,CPFNX320_FCU_HEADING_KNOB_PULL,0 -{Preset Control}- 84=CP(-A,17)D,0,CPFNX320_FCU_HEADING_KNOB_PUSH,0 -{Preset Control}- 85=CP(+A,17)(-A,18)D,5,CPFNX320_FCU_SPEED_KNOB_PULL,0 -{Preset Control}- 86=CP(-A,17)D,6,CPFNX320_FCU_SPEED_KNOB_PUSH,0 -{Preset Control}- 87=CP(+A,17)(-A,18)D,4,CPFNX320_FCU_ALTITUDE_KNOB_PULL,0 -{Preset Control}- 88=CP(-A,17)D,4,CPFNX320_FCU_ALTITUDE_KNOB_PUSH,0 -{Preset Control}- 89=CP(+A,18)(-A,17)D,0,CPFNX320_FCU_HEADING_KNOB_PULL,0 -{Preset Control}- 90=CP(-A,18)D,0,CPFNX320_FCU_HEADING_KNOB_PUSH,0 -{Preset Control}- 91=CP(+A,18)(-A,17)D,6,CPFNX320_FCU_SPEED_KNOB_PULL,0 -{Preset Control}- 92=CP(-A,18)D,6,CPFNX320_FCU_SPEED_KNOB_PUSH,0 -{Preset Control}- 93=CP(+A,18)(-A,17)D,4,CPFNX320_FCU_ALTITUDE_KNOB_PULL,0 -{Preset Control}- 94=CP(-A,18)D,4,CPFNX320_FCU_ALTITUDE_KNOB_PUSH,0 -{Preset Control}- 95=CP(+A,17)(-A,18)D,5,CPFNX320_FCU_VS_KNOB_PULL,0 -{Preset Control}- 96=CP(-A,17)D,5,CPFNX320_FCU_VS_KNOB_PUSH,0 -{Preset Control}- 97=CP(+A,18)(-A,17)D,5,CPFNX320_FCU_VS_KNOB_PULL,0 -{Preset Control}- 98=CP(-A,18)D,5,CPFNX320_FCU_VS_KNOB_PUSH,0 -{Preset Control}-

fo those of you looking for hdg config on bravo for fenix 58=CP(+D,18)64,0,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 59=CU(+D,18)64,0,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 60=CP(+D,18)64,1,CPFNX320_FCU_HEADING_KNOB_INC,0 -{Preset Control}- 61=CP(+D,18)64,2,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- 62=CU(+D,18)64,2,CPFNX320_FCU_HEADING_KNOB_DEC,0 -{Preset Control}- Change you index and device letter to your config

Hi tanks for your answer. Can you tell me or send a screenshot "how can I add a compound button expression so the assignment is only triggered when button 18 (HDG) is set"? Thanks in advance

@TimSteve I found a way to make this work. both fuel levers are on the axess

Hello Can someone share there fenix a320 profile commands on a honeycomb bravo. I would like to get the auto pilot control and inc an dec button to work Buttons i would wand to get working on the fnx320 20 alt 19 vs 18 hdg 17 crs 16 ias 0 hdg 1 nav 2 apr 3 rev 4 alt 5 crs 6 ias 13 dec 12 inc 7 ap

What to do for backup of profiles in fsuipc 7? What files we need to backup if we migrate fsuipc to another system or wand a backup in case of a pc crash.

hello I would like to bind the fuel cut levers of a pmdg aircraft to two axess on my tca boeing yoke? can I do that? and how? also if I can do that can I set fsuipc to onlu load this setting when flying a b738/9?