steved42
-
Posts
28 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by steved42
-
-
I am using ver 2.7. I will see if there is any updates
Did you receive my email with my gpu ini files?
addit downloaded and installed 2.9.1 and no different. At the settings page it allows me to choose my 5870 as my primary video card. I then save settings. However when I go to the PC Info page it still shows my 4650 as my primary video card. It states on the PC info page that there are 2 GPU present.
-
any ideas about my problem ?
-
sent via email
-
I have now installed version 2.7 and it still does not recognise my primary video card. The GPU.ini files are the same with just a single character in it, the number "2"
Please advise
-
sorry just making sure you saw my gpu ini files in my other post ??
will download v2.4 and give it a go next week
-
hi
also see my problem which may be similar. Can you post your gpu .ini files ??
see if they are similar
-
I have 2 GPU ini files
There is a file called GPU.ini which when opened contains one single number " 2 " and that s it
The second file is called GPU1.ini and contains the following
ATI Radeon HD 4550
PCI\VEN_1002&DEV_9540&SUBSYS_21AE1458&REV_00\4&2486FE05&0&0080
aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
60
536870912
I have tried to attach both files but it will not allow these type of files to be sent as attachments
-
sorry for delay
I have now downloaded fsx booster 2.3
The same thing is happening.
I choose the 5800 with 1gb of video memory as my primary video card
Then I hit apply settings
It confirms this
However again I go to PC Info and it is telling me my primary card is the 4000 series and I have 512 mb of video ram
The performance seems poor
Thanks for your consideration of this problem
-
Hello
I have installed version 1.4.7
On the settings page I am given the choice of my 2 video cards.
I select the 5800 series as my primary GPU
On looking at the PC Info however I am still informed
GPU memory is 512 MB and
number of GPUs installed 1
I am not certain that the primary video card the 5800 with 1Gb of memory is recognised??
Thankyou
regards
-
I have a 5800 series as my primary display with 1Gb of memory and another ati 4550 card which I use for instrument display with 512mb. When I use FSPS Booster and ask for PC info it gives me a video memory of 512 mb suggesting it is recognising the secondary card and not the primary card. Is this possible?
-
I checked aerosoft and at least with the boxed version you get the rebate by using tour reg number even if you purchased from the pilot shop
I cant comment on the download version
-
I checked flightsimstore and it still looks like the 8.6 version to me.
-
hekko
I have the boxed version which was bought at the pilot shop not from aerosoft but obviously produced by them. I re state the pilot shop is still selling the old boxed vbersion and I think is still selling the old download version
.
In reply to the quote about the free updates I have not received a single update for my money./ And are the updates new features or fixes
I agree 25 euros is too steep. and should be free to owners of the 8.6 version or boxed version if purchased later than 30 june 2010
Hi SteveD42,
If you didn't download the version from our site, then you must have the Aerosoft version. You can tell by what is written at the right-hand bottom of the introductory window. In this case you get the discount from Aerosoft. Check their website for procedural details.
Hi all others,
the release date of v. 9.0 was announced late July when it was also mentioned that the new copy would (after 4 years of free upgrades) be the first to cost money with registered users receiving a discount.
Regards
Sascha
-
must have been too quick. There now
-
censorship?? or is it a only "Good News " allowed
- 1
-
I have only recently purchased fsc as a boxed version from FSpilotshop. There was no mention of a new version and now I have to pay an extra 25 euro when I have only had a few months of using the software at the original full price.
However the FS pilot shop does not even have the new version 9.0 available as a download and is still selling the old version both the boxed and the download version 8.x at its regular price
I hope nobody purchases this and not realise a new version is available.
http://www.fspilotshop.com/product_info.php?cPath=2_70_74&products_id=1378
Additional specifications:
Download-Version: Version 8.5, Manual as a .pdf-file (English, French, German)
Where are we entitled to this so called discount?? if we purchased from FS pilot shop
-
I have just read on flightsim that new textures are available but I could not find them on your download page. Was I too quick or are they somewhere else?
Ruud Faber developer of the FScene replacement ground textures for the Microsoft Flight Simulator is working on fine-tuning the Night Textures as used in FScene for FSX.
The patches for FScene4X USA&Canada, South America and Africa have been obtainable for some time already. To-day he released the fourth patch covering Australia and New Zealand with 170 revised textures, again as a free download.
This is a work in progress and more patches will follow as soon as ready.
At this moment 4 patches have been released. The small moon in the pictures below indicates the availability. Get the revised night textures for free at www.fscene.com
-
many thanks
-
no it does not use fsuipc to connect to fs. I assume this means no luck.
thanks for quick reply
-
vr insight produces a screen which you can load an instrument panel . Could this use your program to display this information on a second computer via its video screen
many thanks
-
sim touch is a program that uses a touch screen to send messages to flighrtsim
if i wanted to run this on a separate computer could this be done using fsuipc/widefs
I suppose i would have to have wide fs on the same machine as the simtouch program
-
Can I use fsuipc fswide ( which I have not registered yet) to run the serialfp software that vrinsight uses across a network to run a mpanel. Also a micropit and/or cdu II which does rely on a second display using a fspanel. I have managed to get displays of instruments using other software on networked computers but these can be cpu heavy. Can wideview instead of giving a scenery view give an instrument view?
dual video cards and fsps
in FSPS Support Forum (LEGACY)
Posted
sort of worked. I had to change the gpu.ini file to the number 1 manually for it to work properly.