Jump to content
The simFlight Network Forums

ApacheHunter

Members
  • Posts

    10
  • Joined

  • Last visited

Everything posted by ApacheHunter

  1. Hi Pete, I've set up my VRinsight M Panel to work with the PMDG 737-700 in FSX (yes, I know that aircraft is for FS9 only, but that's beyond the scope of this post). I fly the PMDG 737-800 as well in FSX and I am using the same panel as with the 737-700. However, when I select that aircraft, I have to set up the M Panel again to make it work with that aircraft, which is not much fun to do. I think it's because I ticked the box 'Aircraft Specific', so the M Panel setup for the PMDG 737 doesn't interfere with my other aircraft. How can I get the M Panel to work with every aircraft which is equipped with the PMDG 737-700 panel? I'm sure there's a way to do this by editing the FSUIPC4.ini file, but I don't know how. Regards, Kevin ;)
  2. Pete, thanks for your splendid support! It's working fine now! I need to say that LUA is a wonderful addition to FSUIPC. Now I can even get my JS41 to cold & dark with a single button press! :wink: Regards, Kevin
  3. Now you start talking about COM ports, I decided to open VSPE and SerialFP2 and I made some screenshots of them: As you can see, the M Panel is on COM6. Should I mabye change COM5,COM3 to COM6,COM3? I hope so, that makes it easy to solve! :wink: Regards, Kevin
  4. Thanks for your reply, Pete, but I don't really understand what you're saying. In the instructions the following is stated: You will need to program a button or keypress to "LuaToggle VRI_SetBaro" with parameter 0, and you can then toggle between the two modes. I did assign the [Pause Break] key to "LuaToggle VRI_SetBaro" and everytime I pressed that button, the baro changed from 2992 to 1013. Now that's not working anymore. How dan I get that to work again? If I don't assign a button to it, then how can I switch beteen inHg and mbar? Regards, Kevin :wink:
  5. Hi Pete, I've always used the lua command for switching between inHg and mbar on the VRinsight M Panel. Today I noticed it doesn't work anymore. I assigned the [Pause Break] key to "LuaToggle VRI_SetBaro", but when I press that key now, nothing happens. Here's my FSUIPC4.ini file: [General] Debug=Please History=HN59HDNWXVA2W0AJ0XRCD MouseWheelTrim=No MouseWheelTrimSpeed=1 FixControlAccel=No FixMachSpeedBug=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=0.5,2.5 TurbulenceDivisor=40,40,80,80 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=Yes ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=Yes ZapSound=firework ShortAircraftNameOk=Yes TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=Yes SuppressMultilineFS=No AxisIntercepts=No WeatherReadFactor=2 WeatherRewriteSeconds=1 SimConnectStallTime=1 AdvDisplayHotKey=192,9 UpdatedByVersion=4600 JoystickTimeout=15 SmoothBySimTime=No BrakeReleaseThreshold=75 SaveDataWithFlights=No UseProfiles=No DontResetAxes=No CustomWeatherModify=No Console=No PollGFTQ6=Yes BlankDisplays=No ConsoleWindow=0,0,0,0 [GPSout] GPSoutEnabled=No Port=COM1 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [WideServer] WideFSenabled=Yes [Axes] 0=0Z,256,D,22,0,0,0 1=0U,256,D,9,0,0,0 2=0V,256,D,10,0,0,0 3=1X,256,D,7,0,0,0 4=1Y,256,D,8,0,0,0 5=1R,256,D,3,36,0,0 6=2X,256,D,11,0,0,0 7=2Y,256,D,12,0,0,0 8=2Z,256,D,23,0,0,0 9=2R,256,D,36,3,0,0 10=2U,256,D,9,0,0,0 11=2V,256,D,10,0,0,0 12=3Z,256,D,22,0,0,0 13=3U,256,D,9,0,0,0 14=3V,256,D,10,0,0,0 [JoystickCalibration] ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Throttle1=-13523,-512,512,16383/32 Throttle2=-13393,16383,16383,16383/32 Throttle3=-14433,-512,512,16383/32 Throttle4=-14043,-512,512,16383/32 Flaps=-16383,16383/24 AllowSuppressForPFCquad=Yes UseAxisControlsForNRZ=No Throttle=-16253,16256 FlapStarts=-16384,-15232,-14719,-14464 FlapEnds=-16383,-14720,-14465,16384 Spoilers=-11136,16384/16 SteeringTiller=-16384,0,0,16128 LeftBrake=-16383,16384/48 RightBrake=-16383,16384/48 Rudder=-16384,0,0,16128 [Buttons] 5=R3,6,C65976,0 6=U3,6,C65822,0 7=R3,7,C65981,0 8=U3,7,C65823,0 9=U2,22,C65972,0 10=R2,22,C65971,0 11=R2,21,C65966,0 12=U2,21,C65967,0 13=R0,21,C65966,0 14=R0,22,C65971,0 15=R1,6,C65976,0 16=R1,7,C65981,0 17=U0,21,C65967,0 18=U0,22,C65972,0 ButtonRepeat=20,10 21=R3,21,C65966,0 22=R3,22,C65971,0 25=R3,16,C65769,0 26=R3,18,C65769,0 27=R1,0,C65976,0 28=R1,2,C65981,0 32=R3,2,C65607,0 33=R3,3,C65615,0 36=U1,0,C65977,0 37=U1,2,C65982,0 38=U3,21,C65967,0 39=U3,22,C65972,0 40=U1,6,C65977,0 41=U1,7,C65982,0 42=R3,17,C65771,0 43=R3,19,C65771,0 46=P1,4,C66079,0 47=P1,5,C66080,0 48=R0,6,C65976,0 49=U0,6,C65977,0 50=R0,7,C65981,0 51=U0,7,C65982,0 52=P2,15,C65752,0 55=R0,2,C65607,0 56=R0,3,C65615,0 57=P2,4,C66079,0 58=P2,5,C66080,0 59=P0,15,C65752,0 60=P3,15,C65752,0 [JoyNames] AutoAssignLetters=No 1=Saitek Pro Flight Rudder Pedals 1.GUID={C4A1B3E0-9F61-11DF-8003-444553540000} 2=Saitek Pro Flight Quadrant 2.GUID={C40748A0-9F61-11DF-8002-444553540000} 3=Saitek Pro Flight Yoke 3.GUID={C4A1DAF0-9F61-11DF-8004-444553540000} [GPSout2] GPSoutEnabled=No Port= Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [Axes.Aircreation582SL] 0=0U,256,D,9,0,0,0 1=0V,256,D,10,0,0,0 2=1X,256,D,11,0,0,0 3=1Y,256,D,12,0,0,0 4=2U,256,D,9,0,0,0 5=2V,256,D,10,0,0,0 6=3X,256,D,11,0,0,0 7=3Y,256,D,12,0,0,0 8=3U,256,D,21,0,0,0 9=3V,256,D,9,0,0,0 [MacroFiles] 1=MD11 2=C172 3=LVLD763 [Buttons.Cessna Skyhawk 172SP Paint1] 0=P1,5,CM2:1,0 [Programs] RunIf1=READY,CLOSE,C:\Program Files\SerialFP2\SerialFP2.exe [AutoSave] AutoSaveEnabled=No [JoystickCalibration.Feelthere A320 CFM Airbus House] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No FlapStarts=-16384,-15232,-14719,-14464 FlapEnds=-16383,-14720,-14465,16384 ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 LeftBrake=-14848,16384/48 RightBrake=-14848,16384/48 Throttle1=-13653,-512,512,16383/32 Throttle2=-13393,16383,16383,16383/32 Throttle3=-14823,-512,512,16383/32 Throttle4=-14173,-512,512,16383/32 Spoilers=-11136,16384/16 Flaps=-16383,16383/24 SteeringTiller=-16384,0,0,16128 [VRInsight] 1=COM5,COM3 [VRInsight.MPanl] Lua=VRI_SetBaro DriverWrites=Filter WrFilter.1=BAR? DriverReads=Filter RdFilter.1=BAR?+ [LuaFiles] 1=VRI_SetBaro 2=log lvars 3=J41_AP_Display 4=J41_AUTO 5=PMDG_JS41_CD [Keys] 2=45,8,L5:R,0 8=19,8,L1:T,0 [Axes.BMW 760] 0=0R,256,D,3,36,0,0 1=2X,256,D,7,8,0,0 2=2Y,256,D,4,0,0,0 3=3X,256,D,3,36,0,0 [JoystickCalibration.BMW 760] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No FlapStarts=-16384,-15232,-14719,-14464 FlapEnds=-16383,-14720,-14465,16384 ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Throttle=-14848,16384/16 LeftBrake=-14848,16384/48 RightBrake=-14848,16384/48 Throttle1=-16380,-512,512,16380/32 Throttle2=-13393,16383,16383,16383/32 Throttle3=-14823,-512,512,16383/32 Throttle4=-14173,-512,512,16383/32 Spoilers=-11136,16384/16 Flaps=-16383,16383/24 SteeringTiller=-16384,0,0,16128 Rudder=-16384,0,0,16383 [Axes.PBY-5A_Civil_Dutch] 0=0Z,256,D,4,0,0,0 1=1X,256,D,17,0,0,0 2=1Y,256,D,18,0,0,0 3=2X,256,D,7,0,0,0 4=2Y,256,D,8,0,0,0 5=2R,256,D,36,3,0,0 6=2U,256,D,9,0,0,0 7=2V,256,D,10,0,0,0 8=3U,256,D,9,0,0,0 9=3V,256,D,10,0,0,0 [Buttons.PMDG MD-11 KLM Royal Dutch Airlines N/C] 0=P260,5,C66079,0 1=U260,5,C66079,0 2=P260,6,C66080,0 3=U260,6,C66080,0 [Axes.C208B Grand Caravan Executive] 0=0Z,256,D,22,0,0,0 1=0U,256,D,9,0,0,0 2=0V,256,D,5,0,0,0 3=1X,256,D,7,0,0,0 4=1Y,256,D,8,0,0,0 5=1R,256,D,3,36,0,0 6=2X,256,D,6,0,0,0 7=2Y,256,D,12,0,0,0 8=2Z,256,D,23,0,0,0 9=2R,256,D,36,3,0,0 10=2U,256,D,9,0,0,0 11=2V,256,D,10,0,0,0 12=3Z,256,D,22,0,0,0 13=3U,256,D,9,0,0,0 14=3V,256,D,10,0,0,0 [Axes.C208B Grand Caravan Civil] 0=0Z,256,D,22,0,0,0 1=0U,256,D,9,0,0,0 2=0V,256,D,5,0,0,0 3=1X,256,D,7,0,0,0 4=1Y,256,D,8,0,0,0 5=1R,256,D,3,36,0,0 6=2X,256,D,6,0,0,0 7=2Y,256,D,12,0,0,0 8=2Z,256,D,23,0,0,0 9=2R,256,D,36,3,0,0 10=2U,256,D,9,0,0,0 11=2V,256,D,10,0,0,0 12=3Z,256,D,22,0,0,0 13=3U,256,D,9,0,0,0 14=3V,256,D,10,0,0,0 I hope you know how to solve this problem! Thanks in advance! Regards, Kevin :wink:
  6. Pete, you're absolutely right! I found out what I misunderstood of assigning buttons of the M-Panel and now everything is working perfectly. Thanks for your splendid support for this wonderful tool called FSUIPC! Almost can't live without it! :wink: Kind regards, Kevin
  7. I set up the FSUIPC4.ini file again and tested it. The problem stayed the same: only the switches mentioned in my first post are recognized by FSUIPC, no matter what I do. After SerialFP2 has loaded, should I load an FS Module? I also noticed that when I tried to start VSPE, it tells me that it 'Can not load configuration' and I have to load ComPairs_2_3.vspe manually. My FSUIPC4.ini file again: [General] Debug=Please LogExtras=x4 History=RID5G7H4TPSKFEUWDA4PM MouseWheelTrim=No MouseWheelTrimSpeed=1 FixControlAccel=No FixMachSpeedBug=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=0.5,2.5 TurbulenceDivisor=40,40,80,80 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=Yes ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=Yes ZapSound=firework ShortAircraftNameOk=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=Yes SuppressMultilineFS=No AxisIntercepts=No WeatherReadFactor=2 WeatherRewriteSeconds=1 SimConnectStallTime=1 AdvDisplayHotKey=192,9 UpdatedByVersion=4600 JoystickTimeout=15 SmoothBySimTime=No BrakeReleaseThreshold=75 SaveDataWithFlights=No UseProfiles=No DontResetAxes=No CustomWeatherModify=No Console=No PollGFTQ6=Yes BlankDisplays=No [GPSout] GPSoutEnabled=No Port=COM1 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [WideServer] WideFSenabled=Yes [Axes] 0=0Z,256,D,4,0,0,0 1=1X,256,D,11,0,0,0 2=1Y,256,D,12,0,0,0 3=1Z,256,D,23,0,0,0 4=2X,256,D,7,0,0,0 5=2Y,256,D,8,0,0,0 6=2R,256,D,36,3,0,0 7=2U,256,D,9,0,0,0 8=2V,256,D,10,0,0,0 9=3Z,256,D,22,0,0,0 10=3U,256,D,9,0,0,0 11=3V,256,D,10,0,0,0 [JoystickCalibration] ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Throttle1=-13653,-512,512,16383/32 Throttle2=-13393,16383,16383,16383/32 Throttle3=-14823,-512,512,16383/32 Throttle4=-14173,-512,512,16383/32 Flaps=-16383,16383/24 AllowSuppressForPFCquad=Yes UseAxisControlsForNRZ=No Throttle=-16253,16256 FlapStarts=-16384,-15232,-14719,-14464 FlapEnds=-16383,-14720,-14465,16384 Spoilers=-11136,16384/16 SteeringTiller=-16384,0,0,16128 LeftBrake=-14848,16384/48 RightBrake=-14848,16384/48 Rudder=-16384,0,0,16383 [Buttons] 5=R3,6,C65976,0 6=U3,6,C65822,0 7=R3,7,C65981,0 8=U3,7,C65823,0 9=U2,22,C65821,0 10=R2,22,C65971,0 11=R2,21,C65966,0 12=U2,21,C65820,0 13=R0,21,C65966,0 14=R0,22,C65971,0 15=R1,6,C65976,0 16=R1,7,C65981,0 17=U0,21,C65967,0 18=U0,22,C65972,0 ButtonRepeat=20,10 21=R3,21,C65966,0 22=R3,22,C65971,0 25=R3,16,C65769,0 26=R3,18,C65769,0 27=R1,0,C65976,0 28=R1,2,C65981,0 32=R3,2,C65607,0 33=R3,3,C65615,0 36=U1,0,C65977,0 37=U1,2,C65982,0 38=U3,21,C65967,0 39=U3,22,C65972,0 40=U1,6,C65977,0 41=U1,7,C65982,0 42=R3,17,C65771,0 43=R3,19,C65771,0 46=P1,4,C66079,0 47=P1,5,C66080,0 [JoyNames] AutoAssignLetters=No 1=Saitek Pro Flight Quadrant 1.GUID={28847C80-0863-11DF-8003-444553540000} 2=Saitek Pro Flight Rudder Pedals 2.GUID={28845570-0863-11DF-8002-444553540000} 3=Saitek Pro Flight Yoke 3.GUID={28A34F20-0863-11DF-8004-444553540000} [GPSout2] GPSoutEnabled=No Port= Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [Axes.Aircreation582SL] 0=0U,256,D,9,0,0,0 1=0V,256,D,10,0,0,0 2=1X,256,D,11,0,0,0 3=1Y,256,D,12,0,0,0 4=2U,256,D,9,0,0,0 5=2V,256,D,10,0,0,0 6=3X,256,D,11,0,0,0 7=3Y,256,D,12,0,0,0 8=3U,256,D,21,0,0,0 9=3V,256,D,9,0,0,0 [MacroFiles] 1=MD11 2=C172 3=LVLD763 [Buttons.Cessna Skyhawk 172SP Paint1] 0=P1,5,CM2:1,0 [Programs] Run1=READY,CLOSE,C:\Program Files\SerialFP2\SerialFP2.exe [AutoSave] AutoSaveEnabled=No [JoystickCalibration.Feelthere A320 CFM Airbus House] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No FlapStarts=-16384,-15232,-14719,-14464 FlapEnds=-16383,-14720,-14465,16384 ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 LeftBrake=-14848,16384/48 RightBrake=-14848,16384/48 Throttle1=-13653,-512,512,16383/32 Throttle2=-13393,16383,16383,16383/32 Throttle3=-14823,-512,512,16383/32 Throttle4=-14173,-512,512,16383/32 Spoilers=-11136,16384/16 Flaps=-16383,16383/24 SteeringTiller=-16384,0,0,16128 [VRInsight] 1=COM5,COM3 [VRInsight.MPanl] Lua=VRI_SetBaro DriverWrites=Filter WrFilter.1=BAR? DriverReads=Filter RdFilter.1=BAR?+ [LuaFiles] 1=VRI_SetBaro [Keys] 1=19,8,L1:T,0 And the FSUIPC log file: ********* FSUIPC4, Version 4.60a by Pete Dowson ********* Reading options from "C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.ini" Trying to connect to SimConnect Acc/SP2 Oct07 ... User Name="Kevin Schepers" User Addr="xxx@xxx.xx" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired Running inside FSX on Windows Vista (using SimConnect Acc/SP2 Oct07) Module base=61000000 Wind smoothing fix is fully installed DebugStatus=15 203 System time = 06/07/2010 23:06:53 250 FLT UNC path = "\\KEVIN\Flight Simulator X Files\" 250 FS UNC path = "C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\" 844 LogOptions=00000000 00000051 844 SimConnect_Open succeeded: waiting to check version okay 4828 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0) 4828 Initialising SimConnect data requests now 4828 FSUIPC Menu entry added 4875 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 4875 C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 4875 C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 74688 C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\PMDG_MD11\MD-11.AIR 204344 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 204469 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 204563 VRI port 1 "COM5" opened 204563 VRI driver port 1 "COM3" also opened 205016 C:\Program Files\SerialFP2\SerialFP2.exe 205188 System time = 06/07/2010 23:10:18, Simulator time = 13:29:10 (20:29Z) 205282 Aircraft="PMDG MD-11 KLM Royal Dutch Airlines N/C" 207969 VRI COM3 ---> CMDRST [from VRI Driver] 207969 VRI COM5 <--- CMDRST [to Device] 207985 Advanced Weather Interface Enabled 208985 VRI COM3 ---> CMDCON [from VRI Driver] 208985 VRI COM5 <--- CMDCON [to Device] 209016 VRI COM5 ---> CMDCON [from Device] 209016 VRI COM3 <--- CMDCON [to VRI Driver] 209078 VRI COM3 ---> CMDFUN [from VRI Driver] 209078 VRI COM5 <--- CMDFUN [to Device] 209094 VRI COM5 ---> CMDMPanl [from Device] 209094 VRI MPanl ("M-Panel") detected on port COM5 209125 VRI COM3 <--- CMDMPanl [to VRI Driver] 209141 LUA: beginning "C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Modules\VRI_SetBaro.lua" 209157 VRI COM5 <--- BAR2992 [from Lua Plug-in] 209157 VRI COM5 <--- BAR2992 [from Lua Plug-in] 209266 VRI COM3 ---> CMDVER [from VRI Driver] 209266 VRI COM5 <--- CMDVER [to Device] 209297 VRI COM5 ---> CMD1.000 [from Device] 209297 VRI COM3 <--- CMD1.000 [to VRI Driver] 224641 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 224641 Sim stopped: average frame rate for last 20 secs = 21.0 fps 227203 VRI COM5 ---> COMSEL2 [from Device] 227203 VRI COM3 <--- COMSEL2 [to VRI Driver] 227719 VRI COM5 ---> COMSEL1 [from Device] 227719 VRI COM3 <--- COMSEL1 [to VRI Driver] 228625 VRI COM5 ---> COMSEL2 [from Device] 228625 VRI COM3 <--- COMSEL2 [to VRI Driver] 228875 VRI COM5 ---> COMSEL1 [from Device] 228875 VRI COM3 <--- COMSEL1 [to VRI Driver] 229344 VRI COM5 ---> COMSEL2 [from Device] 229344 VRI COM3 <--- COMSEL2 [to VRI Driver] 229532 VRI COM5 ---> COMSEL1 [from Device] 229532 VRI COM3 <--- COMSEL1 [to VRI Driver] 230078 VRI COM5 ---> COMSEL2 [from Device] 230078 VRI COM3 <--- COMSEL2 [to VRI Driver] 230235 VRI COM5 ---> COMSEL1 [from Device] 230235 VRI COM3 <--- COMSEL1 [to VRI Driver] 231875 VRI COM5 ---> FUNRADIO [from Device] 231875 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 233625 VRI COM5 ---> FUNAPMOD [from Device] 233625 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 234141 VRI COM5 ---> FUNRADIO [from Device] 234141 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 234813 VRI COM5 ---> FUNRADIO [from Device] 234813 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 238922 VRI COM5 ---> GEAUP [from Device] 238922 VRI command GEAUP trapped as Joy 260 Btn 5 Toggle 239313 VRI COM5 ---> GEADN [from Device] 239313 VRI command GEADN trapped as Joy 260 Btn 6 Toggle 300297 VRI COM5 ---> FUNRADIO [from Device] 300297 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 300891 VRI COM5 ---> FUNAPMOD [from Device] 300891 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 302532 VRI COM5 ---> FUNAPCTL [from Device] 302532 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 303641 VRI COM5 ---> FUNUSR [from Device] 303641 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 304500 VRI COM5 ---> FUNAPCTL [from Device] 304500 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 305282 VRI COM5 ---> FUNAPCTL [from Device] 305282 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 306016 VRI COM5 ---> FUNUSR [from Device] 306016 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 307219 VRI COM5 ---> FLPDEC [from Device] 307219 VRI command FLPDEC trapped as Joy 260 Btn 7 Toggle 307750 VRI COM5 ---> FLPINC [from Device] 307750 VRI command FLPINC trapped as Joy 260 Btn 8 Toggle 451657 VRI COM5 ---> FUNRADIO [from Device] 451657 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 453313 VRI COM5 ---> FUNAPMOD [from Device] 453313 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 453953 VRI COM5 ---> FUNUSR [from Device] 453953 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 454938 VRI COM5 ---> FUNAPCTL [from Device] 454938 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 455688 VRI COM5 ---> FUNUSR [from Device] 455688 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 456672 VRI COM5 ---> FUNAPCTL [from Device] 456672 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 467110 VRI COM5 ---> FUNAPMOD [from Device] 467110 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 468891 VRI COM5 ---> FUNRADIO [from Device] 468891 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 469594 VRI COM5 ---> FUNUSR [from Device] 469594 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 470313 VRI COM5 ---> FUNAPMOD [from Device] 470313 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 518516 VRI COM5 ---> FUNUSR [from Device] 518516 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 523016 VRI COM5 ---> FUNRADIO [from Device] 523016 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 524532 VRI COM5 ---> FUNAPMOD [from Device] 524532 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 524938 VRI COM5 ---> FUNRADIO [from Device] 524938 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 657297 VRI COM5 ---> FUNRADIO [from Device] 657297 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 658922 VRI COM5 ---> FUNRADIO [from Device] 658922 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 660782 VRI COM5 ---> FUNRADIO [from Device] 660782 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 661032 VRI COM5 ---> FUNRADIO [from Device] 661032 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 662188 VRI COM5 ---> FUNRADIO [from Device] 662188 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 663328 VRI COM5 ---> FUNRADIO [from Device] 663328 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 664297 VRI COM5 ---> FUNAPCTL [from Device] 664297 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 667391 VRI COM5 ---> FUNUSR [from Device] 667391 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 668453 VRI COM5 ---> FUNAPCTL [from Device] 668453 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 669250 VRI COM5 ---> FUNRADIO [from Device] 669250 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 671016 VRI COM5 ---> FUNAPMOD [from Device] 671016 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 672563 VRI COM5 ---> FUNAPMOD [from Device] 672563 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 673266 VRI COM5 ---> FUNAPCTL [from Device] 673266 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 674235 VRI COM5 ---> FUNUSR [from Device] 674235 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 675125 VRI COM5 ---> FUNUSR [from Device] 675125 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 675719 VRI COM5 ---> FUNAPCTL [from Device] 675719 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 676813 VRI COM5 ---> FUNUSR [from Device] 676813 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 677375 VRI COM5 ---> FUNUSR [from Device] 677375 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 678688 VRI COM5 ---> FUNAPMOD [from Device] 678688 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 679297 VRI COM5 ---> FUNAPCTL [from Device] 679297 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 679735 VRI COM5 ---> FUNRADIO [from Device] 679735 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 680172 VRI COM5 ---> FUNRADIO [from Device] 680172 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 695516 VRI COM5 ---> GEAUP [from Device] 695516 VRI command GEAUP trapped as Joy 260 Btn 5 Toggle 695797 VRI COM5 ---> GEADN [from Device] 695797 VRI command GEADN trapped as Joy 260 Btn 6 Toggle 714250 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 719000 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 752922 VRI COM5 ---> FUNRADIO [from Device] 752922 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 753157 VRI COM5 ---> FUNRADIO [from Device] 753157 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 754141 VRI COM5 ---> FUNAPMOD [from Device] 754141 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 754860 VRI COM5 ---> FUNUSR [from Device] 754860 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 755797 VRI COM5 ---> FUNAPCTL [from Device] 755797 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 756344 VRI COM5 ---> FUNAPCTL [from Device] 756344 VRI command FUNAPCTL trapped as Joy 260 Btn 0 Toggle 756875 VRI COM5 ---> FUNUSR [from Device] 756875 VRI command FUNUSR trapped as Joy 260 Btn 2 Toggle 757938 VRI COM5 ---> FUNAPMOD [from Device] 757938 VRI command FUNAPMOD trapped as Joy 260 Btn 1 Toggle 758453 VRI COM5 ---> FUNRADIO [from Device] 758453 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 758875 VRI COM5 ---> FUNRADIO [from Device] 758875 VRI command FUNRADIO trapped as Joy 260 Btn 3 Toggle 760907 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 764078 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 768922 VRI COM3 ---> CMDRST [from VRI Driver] 768922 VRI COM5 <--- CMDRST [to Device] 773188 System time = 06/07/2010 23:19:46, Simulator time = 13:29:36 (20:29Z) 773188 *** FSUIPC log file being closed Average frame rate for running time of 28 secs = 23.3 fps Memory managed: 28 Allocs, 27 Freed ********* FSUIPC Log file closed ***********
  8. Hi Pete, I followed the steps in the manual to set up FSUIPC so I can use the VRinsight M Panel with it. However, the only buttons recognized by FSUIPC are the gear and flaps switches and the red 4-way mode select button. Is this normal or am I doing something wrong? My FSUIPC4.ini file: [General] Debug=Please LogExtras=x4 History=5OKLMCMB9UQUML13KHBWP MouseWheelTrim=No MouseWheelTrimSpeed=1 FixControlAccel=No FixMachSpeedBug=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=0.5,2.5 TurbulenceDivisor=40,40,80,80 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=Yes ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=Yes ZapSound=firework ShortAircraftNameOk=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=Yes SuppressMultilineFS=No AxisIntercepts=No WeatherReadFactor=2 WeatherRewriteSeconds=1 SimConnectStallTime=1 AdvDisplayHotKey=192,9 UpdatedByVersion=4600 JoystickTimeout=15 SmoothBySimTime=No BrakeReleaseThreshold=75 SaveDataWithFlights=No UseProfiles=No DontResetAxes=No CustomWeatherModify=No Console=No PollGFTQ6=Yes BlankDisplays=No [GPSout] GPSoutEnabled=No Port=COM1 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [WideServer] WideFSenabled=Yes [Axes] 0=0Z,256,D,4,0,0,0 1=1X,256,D,11,0,0,0 2=1Y,256,D,12,0,0,0 3=1Z,256,D,23,0,0,0 4=2X,256,D,7,0,0,0 5=2Y,256,D,8,0,0,0 6=2R,256,D,36,3,0,0 7=2U,256,D,9,0,0,0 8=2V,256,D,10,0,0,0 9=3Z,256,D,22,0,0,0 10=3U,256,D,9,0,0,0 11=3V,256,D,10,0,0,0 [JoystickCalibration] ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Throttle1=-13653,-512,512,16383/32 Throttle2=-13393,16383,16383,16383/32 Throttle3=-14823,-512,512,16383/32 Throttle4=-14173,-512,512,16383/32 Flaps=-16383,16383/24 AllowSuppressForPFCquad=Yes UseAxisControlsForNRZ=No Throttle=-16253,16256 FlapStarts=-16384,-15232,-14719,-14464 FlapEnds=-16383,-14720,-14465,16384 Spoilers=-11136,16384/16 SteeringTiller=-16384,0,0,16128 LeftBrake=-14848,16384/48 RightBrake=-14848,16384/48 Rudder=-16384,0,0,16383 [Buttons] 5=R3,6,C65976,0 6=U3,6,C65822,0 7=R3,7,C65981,0 8=U3,7,C65823,0 9=U2,22,C65821,0 10=R2,22,C65971,0 11=R2,21,C65966,0 12=U2,21,C65820,0 13=R0,21,C65966,0 14=R0,22,C65971,0 15=R1,6,C65976,0 16=R1,7,C65981,0 17=U0,21,C65967,0 18=U0,22,C65972,0 ButtonRepeat=20,10 21=R3,21,C65966,0 22=R3,22,C65971,0 25=R3,16,C65769,0 26=R3,18,C65769,0 27=R1,0,C65976,0 28=R1,2,C65981,0 32=R3,2,C65607,0 33=R3,3,C65615,0 36=U1,0,C65977,0 37=U1,2,C65982,0 38=U3,21,C65967,0 39=U3,22,C65972,0 40=U1,6,C65977,0 41=U1,7,C65982,0 42=R3,17,C65771,0 43=R3,19,C65771,0 46=P1,4,C66079,0 47=P1,5,C66080,0 [JoyNames] AutoAssignLetters=No 1=Saitek Pro Flight Quadrant 1.GUID={28847C80-0863-11DF-8003-444553540000} 2=Saitek Pro Flight Rudder Pedals 2.GUID={28845570-0863-11DF-8002-444553540000} 3=Saitek Pro Flight Yoke 3.GUID={28A34F20-0863-11DF-8004-444553540000} [GPSout2] GPSoutEnabled=No Port= Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [Axes.Aircreation582SL] 0=0U,256,D,9,0,0,0 1=0V,256,D,10,0,0,0 2=1X,256,D,11,0,0,0 3=1Y,256,D,12,0,0,0 4=2U,256,D,9,0,0,0 5=2V,256,D,10,0,0,0 6=3X,256,D,11,0,0,0 7=3Y,256,D,12,0,0,0 8=3U,256,D,21,0,0,0 9=3V,256,D,9,0,0,0 [MacroFiles] 1=MD11 2=C172 3=LVLD763 [Buttons.Cessna Skyhawk 172SP Paint1] 0=P1,5,CM2:1,0 [Programs] Run1=READY,CLOSE,C:\Program Files\SerialFP2\SerialFP2.exe [AutoSave] AutoSaveEnabled=No [JoystickCalibration.Feelthere A320 CFM Airbus House] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No FlapStarts=-16384,-15232,-14719,-14464 FlapEnds=-16383,-14720,-14465,16384 ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 LeftBrake=-14848,16384/48 RightBrake=-14848,16384/48 Throttle1=-13653,-512,512,16383/32 Throttle2=-13393,16383,16383,16383/32 Throttle3=-14823,-512,512,16383/32 Throttle4=-14173,-512,512,16383/32 Spoilers=-11136,16384/16 Flaps=-16383,16383/24 SteeringTiller=-16384,0,0,16128 [VRInsight] 1=COM5,COM2 [VRInsight.MPanl] Lua=VRI_SetBaro DriverWrites=Filter WrFilter.1=BAR? DriverReads=Filter RdFilter.1=BAR?+ [LuaFiles] 1=VRI_SetBaro [Keys] 1=19,8,L1:T,0 Thanks in advance for your help, Pete! :wink:
  9. Thanks for your quick reply Pete! I also think FSUIPC doesn't touch the FSX cockpits, but I only described my problem and that's how it is. Yes, I did delete the INI file, because I wanted a complete reinstall of FSUIPC. The setting I changed was a hotkey setting. Here is my logfile: ********* FSUIPC4, Version 4.28 by Pete Dowson ********* Reading options from "C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.ini" User Name="Kevin Schepers" User Addr="kevinschepers@home.nl" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired Running inside FSX on Windows Vista (SimConnect Acc/SP2 Oct07) Module base=61000000 Wind smoothing fix is fully installed DebugStatus=15 110 System time = 13:23:01 156 FLT UNC path = "\\KEVIN\Users\Kevin Schepers\Documents\Flight Simulator X Files\" 156 FS UNC path = "C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\" 1250 LogOptions=00000001 1250 SimConnect_Open succeeded: waiting to check version okay 4391 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0) 4391 Initialising SimConnect data requests now 4391 FSUIPC Menu entry added 4453 C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 4453 C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 16969 Weather Mode now = Theme 24469 C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\C172\Cessna172SP.AIR 24469 c:\users\kevin schepers\documents\flight simulator x files\Previous Flight.FLT 44719 System time = 13:23:45, FSX time = 12:35:48 (10:35Z) 44875 Aircraft="Cessna Skyhawk 172SP Paint1" 52797 Advanced Weather Interface Enabled 109328 Sim stopped: average frame rate for last 57 secs = 13.8 fps 230906 Sim stopped: average frame rate for last 109 secs = 16.1 fps 330531 Sim stopped: average frame rate for last 45 secs = 17.2 fps 470453 Sim stopped: average frame rate for last 100 secs = 19.5 fps 475453 System time = 13:30:56, FSX time = 12:40:34 (10:40Z) 475453 *** FSUIPC log file being closed Average frame rate for running time of 313 secs = 16.9 fps Memory managed: 140 Allocs, 140 Freed ********* FSUIPC Log file closed *********** I hope you find out what the problem is! :wink:
  10. Since I installed FSCopilot and FSInn, the gauges and panels of all aircraft in FSX will freeze. In other words: no switches are usable anymore and all gauges and displays will freeze after a couple of seconds. However, when I click a switch or turn a heading indicator a little bit and after that switch to Windows (Vista) and back to FSX again, I can see that the switch has moved, but I cannot move it again. I noticed that when I disabled FSUIPC, all worked fine. When I uninstalled FSCopilot, the problem was still present but when I disabled FSUIPC again, everything worked fine again, so I decided to completely reinstall FSUIPC. Everything seemed to work fine then, but as soon as I made some changes in FSUIPC's settings, the problem was there again. I already tried to reinstall FSCopilot in a 'fresh' FSX (yes, I did install the whole thing again - not nice!) But the conflict with FSUIPC is present again, even after I uninstalled FSCopilot. It's getting really frustrating now because the whole simulator has become unusable and I don't want to reinstall everything over and over. I hope anyone can help me! Thanks in advance! :wink:
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.