Jump to content
The simFlight Network Forums


  • Content Count

  • Joined

  • Last visited

Everything posted by smasma

  1. In the scenery\world\scenery folder I found a file with a .bgl.passive ending so I moved it to my desktop. I went back to the NYC area and still nothing. I also went to Chicago and there is not traffic at O'Hare. I do have FSDT KORD installed and a Freeware Meigs package. In the ImagineSim KLGA scenery folder everything looks like it belongs. Is there something else that I have to do? Thanks
  2. I have been flying around the New York area and the airports are empty. Occasionally theres a plane at each one, but rarely. The airports that are empty are Kennedy, LaGuardia, and Newark. If it makes any difference I do have ImagineSim's KLGA. I had this problem and I reinstalled Mytraffic and it still is happening. Is there any solution? Thanks
  3. Could someone that has ai traffic at vhhx post the all the new/changed files here for so I can just put them in my mytraffic folder. I'm talkng about fsx. Thanks
  4. I explain the problem in this post on the FlyTampa support forum: http://www.flytampa.org/forum/viewtopic.php?t=3034
  5. For some reason I dont see a BR2_TNCM file in the Mytraffic/scenery folder. I do run fsx sp2. I dont have compatibiliy problems with the airport just there seems to be some sort of problem with the traffic and some people said there could be multipule afcads. If you click on the link above it shows the problem I am having. I didn't fully test the new afcad that Martin said to download yet I have been busy. I don't think it will work, but I'll try it out. I was just wanted to know if my traffic puts in an afcad for TNCM, which it does according to you. In my Mytraffic/Scenery folder, I don't see one...
  6. Does Mytraffic put in an afcad for TNCM I am having a problem. My problem is here: http://www.flytampa.org/forum/viewtopic.php?t=3034 Some people say its multiple afcads, but I don't think so because I can't find one in the Mytraffic/Scenery Folder. Thanks
  7. This is a stupid question but how do you install these paints? Thanks
  8. is anything going to be done about this, or should I just deal with not having it?:( I could probably somehow make it if someone told me how to. I have Photoshop.
  9. Ok thanks. In the aircraft series in the mytraffic editor I searched for DHC6 and it came up as DHC6 Twin Otter. That is why i thought u could easily get textures for it. If not its ok. I 'm trying to make the St. Maarten area as realistic as I can. Thanks anyway.
  10. I changed the values and the 744 lands, Thanks. Are there any ways to make it so the plane is 50-100 feet above Maho beach instead of 200 feet? Thanks I copied and pasted the sections in the config file I changed. If you want you can copy them in the sections or just change it manually where is is changed. Under the autopilot section in the config file I changed the default_vertical_speed from 1800 to 1890 [autopilot] autopilot_available = 1 flight_director_available = 1 default_vertical_speed = 1890.0 autothrottle_available = 1 autothrottle_arming_required = 1 autothrottle_max_rpm = 90 autothrottle_takeoff_ga = 1 pitch_takeoff_ga = 8; max_pitch=10.0 max_pitch_acceleration=1.0 max_pitch_velocity_lo_alt=2.0 max_pitch_velocity_hi_alt=1.5 max_pitch_velocity_lo_alt_breakpoint=20000.0 max_pitch_velocity_hi_alt_breakpoint=28000.0 max_bank=25.0 max_bank_acceleration=1.8 max_bank_velocity=3.00 max_throttle_rate=0.10 nav_proportional_control=16.00 nav_integrator_control=0.17 nav_derivative_control=0.00 nav_integrator_boundary=2.50 nav_derivative_boundary=0.00 gs_proportional_control = 18.0 gs_integrator_control = 0.33 gs_derivative_control = 0.00 gs_integrator_boundary = 0.70 gs_derivative_boundary = 0.00 yaw_damper_gain = 1.0 The Flight Tuning Section looks like this: [flight_tuning] cruise_lift_scalar = 1.0 parasite_drag_scalar = 1.50 induced_drag_scalar = 1.05 elevator_effectiveness = 1.0 aileron_effectiveness = 1.0 rudder_effectiveness = 1.0 pitch_stability = 1.0 roll_stability = 1.0 yaw_stability = 1.0 elevator_trim_effectiveness = 1.0 aileron_trim_effectiveness = 1.0 rudder_trim_effectiveness = 1.0 Flight Tuning should look like this: [flight_tuning] cruise_lift_scalar = 1.0 parasite_drag_scalar = 1.50 induced_drag_scalar = 1.05 elevator_effectiveness = 1.0 aileron_effectiveness = 1.0 rudder_effectiveness = 1.0 pitch_stability = 1.0 roll_stability = 1.0 yaw_stability = 1.0 elevator_trim_effectiveness = 1.0 aileron_trim_effectiveness = 1.0 rudder_trim_effectiveness = 1.0
  11. I noticed in that MTX51b does not have Winair which has a fleet of all twin otters. Is it possible for someone to make it or give me the tools to make the texture. Thank you
  12. At the new tncm update by flytampa, when the 744 is on final it always reports going missed. I don't know why this is happening because in preliminary version the 744 lands fine. I went toI the flytampa forum and told my problem and they said to go this forum. The 744 always reports this because it lands 3/4 down the runway. I am using MTX51b. The default afcad is disabled. Thanks
  13. thanx im gonna do what u said to do. dont u mean the AirFrance 742/743? When i looked on airliner.net only those two series of 747's go to tncm http://www.airliners.net/search/photo.search?aircraft_genericsearch=Boeing+747%25&airlinesearch=Air+France%7CUTA+-+Union+de+Transports+Aeriens+Cargo+%28Air+France%29%7CCorsair+%28Kabo+Air+%28Air+France%29%29%7CCorsair+%28Air+France%29&countrysearch=-+Philipsburg+%2F+St.+Maarten+-+Princess+Juliana+%28SXM+%2F+TNCM%29&specialsearch=&daterange=&keywords=&range=&sort_order=&page_limit=60&thumbnails=&calccount=42&truecount=true&engine_version=6.0
  14. i use fly tampa tncm for fsx. i have my traffic v51b. There are some errors in the schedule like the Air France 744, the many klm planes there besides the Md-11 and 744 which belongs. I opened up the my traffic utility and I click make forbidden in the departure list but it doesn't work and keeps showing up when I reopen the departure list. Is there any way to get rid of the planes that dont belong? i can do it manually if someone tells me what to do. thanx
  15. i downloaded 5.1b and it works. thnx. :D
  16. it doesnt say all it says is:MTXV51 in the MT_VersionX txt document. it doesnt say a or b
  17. i have mytraffic 5.1 i use fsx sp1
  18. i have put both a 100% b4 and it is just a bunch more prop planes
  19. i have the fsx version. its not beta. its one of the final ones before it is released for fsx
  20. i have fly tampa scenery for tncm. i go to the airport and the only ai planes i see are american eagle and other commercial prop planes. my ai traffic is on 25%. even when i set both to 100% its more prop planes. there are never american, air france and klm there. how do i have traffic like this:
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.