europa345

April 27, 2014

still for sale

i´m open to offers

April 25, 2014

dear all

i sell my mcp and efis

is usb plug and play

metal case

backlighted

1 usb for both (MCP and EFIS)

scale 1:1

compatible with PROSIM, FS9,FSX PMDG, IFLY

i can show you it working in live by skype or facetime

i also made some videos in youtube

if interested, please, send me a private mail to

europa345@hotmail.com

thanks so much

Miguel

October 29, 2013

Dear Pete

you are completely right, in fsx the elevator also does not center when push nº 5.

Well i fixe the problem.

When i copy the FSUIPC.ini file into the prepard3d modules the problems with the calibration was solved, but the elevator was still moving up and down alone.

i had the yoke(aleiron and elevator) config in prepard configuration and also in fsuipc section.

when i delete the assigments in Prepard3d configuration and just let fsuipc to operate, no it works perfect

in FSX also, the correct is to config only in FSUIPC?

thanks a lot

Miguel

October 28, 2013

hi Pete

preparad v2 is out? otr you are a b-tester?

anyway, there are big imporvements comparing with FSX?

thanks

Miguel

October 28, 2013

thanks pete, i will do it and also report to you

When i calibrate the yoke in Windows menu, the axes moves perfectly, the problem is a jump to 16386 near the 0.

Also the fact that the elevator is not centered when you push 5 is strange.

Does this happen in your system?

Miguel

October 28, 2013

hi

i actually use FSX and i have all my controls working perfectly without any problem sing FSUIPC
yesterdaty i decide to give a chance to PREPARD that i have it since 1.4 version but i did not try it deeply yet

the problem is that the elevator is doing extrange things moving alone.
i had disable all the axis of the other joysticks in prepard config menu and only have the elevator and aleiron axes of the yoke.
if i go to fsuipc and move tha axes, i find a 16383 signal that comes near 0 and then follows normal and get art the end 16383.

i calibrate and have the same result. but the most extrange is that in fsuipc of fsx it works perfect, and FSX controls move perfect
i also realise that moving the aleiron and elevator with keys, in fsx when you push the number 5 of keypad, all the axis gets centered, and in prepard in my case it only works for the aleiron and not for the elevator that stays in UP position after pushing 5 (i did this test with the Yoke unplagged)
how can i know what is giving me the problem?

i have disabled all the axes assigments of all the other devices

i insist that in FSX everything works perfect

thanks a lot

Miguel

June 17, 2013

hi Pete

i have a problem with the last version of fsupic 4.9 of 5 of May

the problem is the following

i have a RSP throttle. this TQ works with sioc, and since i downloaded and installed the last version of fsuipc, the rudder trim wheels are at any moment turning.

do you have an idea about the problem?

in the other side, how can i download the previous version of fsuipc?

thanks a lot

Miguel

February 22, 2013

hi to all

I sell my MCP and EFIS is interfaced with iocards.actually is fully working with Prosim737

very good quality, everything works

I can make any video for you to see t working or i can send to you more info by mail.

I attach a picture with all on and a video working with prosim

Both, the EFIS and MCP are boxed and are usb plug and play modules

I´m located in madrid, spain

For more info, please send me an email to

europa345@hotmail.com

December 11, 2012

Hi pete

I changed to be able to calibrated throught fsuipc and to be able to have a dead zone.

Why doing it thorugh fsuipc the tiller is linked to the rudder and if you do it via steering set not?

Can ou add that function to have it separately as in the real plane?

Thanks so much

Miguel

December 11, 2012

Dear Pete.

i had download the update and i added the sterring tiller and calibrate form fsuipc.

the only problem is that now the sterring moves the rudder.

as i had it before, with FS normal axis and steering set selected, the rudder and the steering was independient.

now when i move the tiller , the rufdder moves, but when i push the rudder nothing happends

there is any way to have it like before but with the posibility of having independient rudder and tiller?

the tiller moves the gear and not the rudder

Miguel

December 3, 2012

hi pete, yes, it was wideclient (sorrry)

the wideclient in the laptop was 5 months old

Miguel

December 3, 2012

hi Pete, exactly

actually i have configurated via fsuipc but as sterring set so you can not calibrated from fsuipc and you can not set a dead zone

thanks so much

Miguel

December 3, 2012

Dear Pete

just wanted to comment to you a problem that i had that now is solved.

I have a 737 cockpit and i have a remote laptop from where i control the instructor station usind wide FS

The problem was that when i was flying and then i turn on the wideFS in the laptop suddently the rudder went completely to the left

i checked the calibration of the rudder, if there was something wrong but everything was normal.

i realise that i had updated FSUIPC in the main computer but i did not update widefs in the laptop.

the different version in both computers was doing that strange things

once i downloaded the update of FSUIPC in the laptop, everything works perfect

Miguel

December 3, 2012

Dear Pete

i think that would be usefull if you could add the steering set to the axis assigment in order to be able to calibrate from FSUIPC as an axis as happen with the aleirons, rudder.....

in this way we could set dead zone, slope.....

just an idea

miguel

November 6, 2012

Dear Pete

i made the test of setting sensivity to the maximun and dead zone to the minimun an the result is the same

Miguel

November 3, 2012

Dear Pete

i have my rudder and my rudder trim confiurated throught FSUIPC.

As far as i know the rudder trim moves the pedals for the pilot not to have to be pushing the pedal, so as i understand the maximun rudder trim should have the same effect that full rudder pedal

My situation is that with full pedal and with the rudder indicator in the limit, if i move the rudder trim, the plane yaws more

for example, after take off with engine failure pushing the full pedal, i´m not able to maintain centerline and the plane goes out, but if i also move the rudder trim, i´m able to follow a level flight.

After take off i am able to control the plane just using the pedals, the problem is after take off with SE

is this correct?

Ther is any way to do that the rudder pedals imput will be as the rudder trim imput?

in fsuipc i have ruder trim and ruder with a range from 16383 to -16383 without any slope

Any idea ?

thanks so much

Miguel

October 11, 2012

hi

all the fsx control configuration is deleted and still the same problem

Miguel

October 11, 2012

hi Pete

i have the following problem

In my cockpit i have some buttons that i do not know which ones are that are moving my trim.

i realise about that because when fsx crashed to me, some buttons of my new throttle that uses a joystick card suddently appeared with the offset sword increment configration that i had for my trim button. the same happened with other 2 buttons.

Well, i deleted that assigment for that buttons but there is still trim movement.

i made the rudder trim and the steering wheel using and old CH prodcuts yoke, so in that card , i just can configurate the axis but not buttons and perhaps that hiden buttons are also configurated.

so, how can i delete all my fsuipc configuraion and begin froma clean one

or there is any way to know or log what is sending fsuipc imputs?

Thanks so much

Miguel

March 13, 2012

Hi pete

Really thank you for your time and support

I will contact FSC technical support

Again, thanks

March 12, 2012

Dear Pete

this is what i did

-i entered in joystick calibration page 3(separate throttle per engine)

-I unchecked the exclude ThrottleN_set

- i moved the throttle levers but nothing happened

- i also went to axis assigment but no lever is detected

Any other idea?

thanks

Miguel

March 12, 2012

Exactly pete, now i understand

I will try and come back

Thanks a lot

Sorry. FSC THROTTLE

FSC is the brand

Miguel

March 12, 2012

Dear pete

I will try

Remember that this throttle is motoriced and the fac throttle make it move alone

I dont understand the part when you say to switxh throttle off

Miguel

March 12, 2012

Dear PETE

this is the log file without the throttle. in this case, the reverser works perfect

********* FSUIPC4, Version 4.758 by Pete Dowson *********

User Name="

User Addr="

FSUIPC4 Key is provided

WideFS7 Key is provided

Running inside FSX on Windows 7

Module base=61000000

78 System time = 12/03/2012 18:45:04

78 FLT UNC path = "C:\Users\miguel\Documents\Archivos de Flight Simulator X\"

109 Trying to connect to SimConnect Acc/SP2 Oct07 ...

125 FS UNC path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

546 LogOptions=00000000 00000001

546 Wind smoothing fix is fully installed

546 G3D.DLL fix attempt installed ok

546 SimConnect_Open succeeded: waiting to check version okay

546 Trying to use SimConnect Acc/SP2 Oct07

4462 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0)

4462 Initialising SimConnect data requests now

4462 FSUIPC Menu entry added

4493 c:\users\miguel\documents\archivos de flight simulator x\pruebs.FLT

4493 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Jetstream_738\Jetstream738.AIR

40139 System time = 12/03/2012 18:45:44, Simulator time = 18:45:09 (17:45Z)

40155 Aircraft="Boeing 737-800 Ryanair"

43852 Starting everything now ...

43852 Run: "C:\Program Files (x86)\iocards\SIOC\sioc.exe"

43852 Run: "C:\Users\MIGUEL\Desktop\prosim737\Prosim737\prosim737.exe"

43867 Run: "C:\Users\MIGUEL\Desktop\prosim737\ProsimMCP\ProsimMCP.exe"

43867 Run: "C:\Users\MIGUEL\Desktop\prosim737\ProsimCDU\ProsimCDU.exe"

43867 Run: "C:\Program Files (x86)\iocards\SIOC\IOCModules.exe"

43867 Run: "C:\Users\MIGUEL\Desktop\prosim737\ProsimDisplay\ProsimDisplay.exe"

44757 Exception 20 "DATA_ERROR", Ref 2551, Index param 1 on write SetData for "ADF SOUND"

45209 Advanced Weather Interface Enabled

91510 Sim stopped: average frame rate for last 52 secs = 35.3 fps

99778 LogOptions changed, now 30000000 00000005

101603 *** AXIS: Cntrl= 65820 (0x0001011c), Param= -4819 (0xffffed2d) THROTTLE1_SET

101603 *** EVENT: Cntrl= 65966 (0x000101ae), Param= 0 (0x00000000) THROTTLE1_DECR

101697 *** AXIS: Cntrl= 65820 (0x0001011c), Param= -5595 (0xffffea25) THROTTLE1_SET

102087 *** AXIS: Cntrl= 65820 (0x0001011c), Param= -4018 (0xfffff04e) THROTTLE1_SET

102196 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 0 (0x00000000) THROTTLE1_SET

102290 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -596 (0xfffffdac) AXIS_AILERONS_SET

102399 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET

102508 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -298 (0xfffffed6) AXIS_AILERONS_SET

102617 *** AXIS: Cntrl= 65820 (0x0001011c), Param= -4551 (0xffffee39) THROTTLE1_SET

102617 *** EVENT: Cntrl= 65966 (0x000101ae), Param= 0 (0x00000000) THROTTLE1_DECR

102711 *** AXIS: Cntrl= 65820 (0x0001011c), Param= -5595 (0xffffea25) THROTTLE1_SET

103023 *** AXIS: Cntrl= 65820 (0x0001011c), Param= -4596 (0xffffee0c) THROTTLE1_SET

103117 *** AXIS: Cntrl= 65820 (0x0001011c), Param= -1267 (0xfffffb0d) THROTTLE1_SET

103226 *** AXIS: Cntrl= 65820 (0x0001011c), Param= 0 (0x00000000) THROTTLE1_SET

103522 *** AXIS: Cntrl= 65820 (0x0001011c), Param= -3219 (0xfffff36d) THROTTLE1_SET

103522 *** EVENT: Cntrl= 65966 (0x000101ae), Param= 0 (0x00000000) THROTTLE1_DECR

103631 *** AXIS: Cntrl= 65820 (0x0001011c), Param= -5595 (0xffffea25) THROTTLE1_SET

104692 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET

104801 *** AXIS: Cntrl= 65763 (0x000100e3), Param= -298 (0xfffffed6) AXIS_AILERONS_SET

105004 *** EVENT: Cntrl= 65732 (0x000100c4), Param= 0 (0x00000000) EXIT

114021 System time = 12/03/2012 18:46:58, Simulator time = 18:46:05 (17:46Z)

114021 *** FSUIPC log file being closed

Average frame rate for running time of 57 secs = 35.5 fps

G3D fix: Passes 2745, Null pointers 0, Bad pointers 0, Separate instances 0

Memory managed: 30 Allocs, 30 Freed

********* FSUIPC Log file closed ***********

March 12, 2012

Dear pete

here you are. i just have config reverser 1 .i only move one time up.

i had delete the key data. if you want i can send you the original to your mal

thanks

Miguel

********* FSUIPC4, Version 4.758 by Pete Dowson *********

User Name=

User Addr=

FSUIPC4 Key is provided

WideFS7 Key is provided

Running inside FSX on Windows 7

Module base=61000000

47 System time = 12/03/2012 18:08:39

47 FLT UNC path = "C:\Users\miguel\Documents\Archivos de Flight Simulator X\"

94 Trying to connect to SimConnect Acc/SP2 Oct07 ...

94 FS UNC path = "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\"

515 LogOptions=00000000 00000001

515 Wind smoothing fix is fully installed

515 G3D.DLL fix attempt installed ok

515 SimConnect_Open succeeded: waiting to check version okay

515 Trying to use SimConnect Acc/SP2 Oct07

5632 Running in "Microsoft Flight Simulator X", Version: 10.0.61472.0 (SimConnect: 10.0.61259.0)

5632 Initialising SimConnect data requests now

5632 FSUIPC Menu entry added

5663 c:\users\miguel\documents\archivos de flight simulator x\sobre arganda.FLT

5663 C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Jetstream_738\Jetstream738.AIR

36551 Weather Mode now = Theme

36551 c:\users\miguel\documents\archivos de flight simulator x\pruebs.FLT

37456 System time = 12/03/2012 18:09:16, Simulator time = 17:59:33 (16:59Z)

37456 Aircraft="Boeing 737-800 Ryanair"

72166 Starting everything now ...

72213 Run: "C:\Program Files (x86)\iocards\SIOC\sioc.exe"

72213 Run: "C:\Users\MIGUEL\Desktop\prosim737\Prosim737\prosim737.exe"

72213 Run: "C:\Users\MIGUEL\Desktop\prosim737\ProsimMCP\ProsimMCP.exe"

72213 Run: "C:\Users\MIGUEL\Desktop\prosim737\ProsimCDU\ProsimCDU.exe"

72229 Run: "C:\Program Files (x86)\iocards\SIOC\IOCModules.exe"

72229 Run: "C:\Users\MIGUEL\Desktop\prosim737\ProsimDisplay\ProsimDisplay.exe"

73211 Exception 20 "DATA_ERROR", Ref 2632, Index param 1 on write SetData for "ADF SOUND"

73243 Advanced Weather Interface Enabled

100340 Sim stopped: average frame rate for last 29 secs = 35.0 fps

107064 LogOptions changed, now 30000000 00000005