timtaylor1

I turned off both firewalls on both computers and wideserver (Flight simulator) was started.

Thought I would add these logs ********* WideClient Log [version 6.987] Class=FS98MAIN ********* Date (dmy): 09/12/12, Time 14:01:44.046: Client name is TAYLOR-1 9750 Attempting to connect now 9813 Trying TCP/IP host "Taylor-1" port 8002 ... 9813 ... Okay, IP Address = 192.168.1.5 9875 LUA: "\\Taylor-1\WideClient X\Initial.LUA": not found 10719 Error on client pre-Connection Select() [Error=10061] Connection refused 10719 Ready to try connection again 11734 Attempting to connect now 15922 ****** End of session performance summary ****** 15938 Total time connected = 0 seconds 15938 Reception maximum: 0 frames/sec, 0 bytes/sec 15938 Transmission maximum: 0 frames/sec, 0 bytes/sec 15938 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0 15938 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) ********* ********* WideServer.DLL Log [version 6.94] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 09/12/12, Time 11:31:31.599: Server name is TAYLOR-2 100589 Initialising TCP/IP server 100589 Initialising IPX/SPX server 100589 IPX/SPX socket() failed [Error=10044] Socket type not supported 100589 Failed to start IPX/SPX Server 100589 Initialising UDP/IP server 100667 Broadcasting service every 1000 mSecs 111993 Restarting service due to total lack of use 111993 Failed to start IPX/SPX Server 1873525 Closing down now ... Memory managed: Offset records: 0 alloc, 0 free Read buffer usage: 0 alloc, 0 free, max in session: 0 Write buffer usage: 0 alloc, 0 free, max in session: 0 Throughput maximum achieved: 0 frames/sec, 0 bytes/sec Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec ********* Log file closed ********* Tried everything you have suggested. Would having windows 7 on the server computer resolve the problem? Tim

I am havibg trouble communicating with my other computer using WideFS and linking to FS9. Client computer is windows XP and FS computer is windows7

and/or write something in Wide Client software to link it to FSX on my other computer? I did write "Run=C:\Program files\Aerosoft\FSC\FSC.exe" The link doesn't work by the way. Thought I would clarify my words

I used an icon "Wide FS" for my FS9 startup before lanching FSC, The icon for FSX is the same thing, only labled FSX underneath. Do I need to change the icon and/or write something in Wide Client software to FSX on my other computer? I did write "Run=C:\Program files\Aerosoft\FSC\FSC.exe" It doesn't work by the way. Thanks Tim

This morning when I started my craft I noticed no steering. I looked at the rudder and it moved only slightly. I tried to recalibrate with FSUIPC but still the same minimal movement Tim

H. I am trying to calibrate reverse thrust. when I move the handle from full forward to idle there is a number change. when I pull the throttle into where reversers are there is no number registering. (a dead zone) any way of wiping out the memory in FSUIPC as far as the throttle quadrent is concerned so I can start over again? Thanks Tim

Thanks Pete. I'll try your suggestions Tim

1. When the craft is powered up, The elevators and aelerons are fully turned to one side and not centered untel I move my flight yoke 2. when I taxi and make the takeoff run, my plane wants to go to the right slightly. when I try to compensate with my rudder pedels, I look like a drunken horse. (actually my aircraft, I look o.k.) 3. Any way of de-sensitising the rudder pedels? any little push with my feet over corrects. Thanks Tim

Thanks Pete

I have Saitek rudder pedels (USB) I never got it to work and now I have a new problem. The rudder itself is turned to the right and no pedel push will move it. Could you tell me the page number for the manual so I can calibrate the rudders. Tim

When i press te right ruder pedal the movement is slow and linear.

I tried to adjust the steering tiller in FSUIPC. When I would step on the left rudder pedel to steer, I'de careen off the runway if I pressed the left rudder. With outside cockpit view I noticed when I would use the L rudder pedal, the rudder would move all the way to the left in a full movement. Help