spiro
-
Posts
43 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by spiro
-
-
Hi
I got it working just one small thing i dont get from the documentaion,
I want to set it up as when i close FSX for all softwear and pc to shut down,reading the documetation i set it as it says but once i close fsx it dose not close the clients
If when fsx is runnung i press the close widefs application witch comes with wide fs i works all pc close down,
I first set in the wide sever ini witch is in the fsuipc
[user]
Autoshutdown=yes
And then in the client under user i set
Allowshutdown=yes
This way it works with the close widefs application
I also check the widesever0 log and i sed sending close signal to clients (something like that)
I am looking at the documentaion again but dont know were i have gon worng
Regards
-
Hi
I fixed it by the way you explained Run1=CLOSE,"_______"
It works perfict thanks a alot!!!!
I tryed the same thing on the client but got error [267] and softwear will not open dose the clients need somethig diffrent?
Regards
-
Hi
That explains it to me i was thinking
Evey line was a step so
run all programs and the close all programs, so i get it for each progam i want to run and close
Its one line
Run1=CLOSE,"----------"
That it I will try it tomorrow ,it clears every thing know
Let you how it gose thanks alot for the help
Regards
-
Hi
Run1 is the same program as run 2 is what i am trying to close,so i am trying to just open it
Run 1="______"
And then close it
Run2=CLOSE,"_______"
I tryed it with "--" but had the same resault
If its only 1 program
I am trynig to get it working and the try on the other clients
Regards
-
HI
I read the documentaion and try as it says but still no luck
Run1="(program i want to run)"
Run2=CLOSE,(program i reqested to run)
I tryed KILL too but still dose not close
The program is PM sounds
It start ok but dose not close
My English might not be so good but still dont get it.
Regards
-
Hi
Thanks for the quick reply i did look at the documentation but just did not get it right ,
so it will have to be something like this:
Run1="_____"
Run2=close=yes"________"
regards
-
Hi
Thanks for the tip i understand that starting WideFS via the win7 start up and getting the programs to start up via WideFS is good and got it working
just cant get them to close.
Another thing that my sound stupid on my side,I have read the documentation one thing i don't understand is in my config files ti looks like a lot of things are missing
the thing i don't understand is , is that how it is and depending on my needs i go and put the functions i want or is something wrong with my config file.
sorry if its a stupid question.
i have attached my fsuipc config and one of my clients WideFS config files Not shore were the problem is
FSUIPC (FSX MODULES FOLDER)
[General]UpdatedByVersion=4939nHistory=OJHJZIMW8UCV0VC844XIYAxesWrongRange=NoTCASid=FlightTCASrange=40AxisCalibration=NoDirectAxesToCalibs=NoShowMultilineWindow=YesSuppressSingleline=NoSuppressMultilineFS=NoAxisIntercepts=NoDontResetAxes=NoInitDelay=0GetNearestAirports=YesOOMcheck=YesWeatherReadFactor=2WeatherRewriteSeconds=1CustomWeatherModify=NoSimConnectStallTime=1LuaRerunDelay=66Console=NoInitDelayDevicesToo=NoNewInterceptTextMenu=NoUseSystemTime=NoUseMidMouseBtn=YesMouseWheelMove=NoMouseWheelTrim=NoMouseWheelTrimSpeed=1JoystickTimeout=20PollGFTQ6=YesBlankDisplays=NoFixControlAccel=NoFixMachSpeedBug=NoDeleteVehiclesForAES=YesAutoScanDevices=YesVisibilityOptions=NoOneCloudLayer=NoCloudTurbulence=NoCloudIcing=NoGenerateCirrus=NoSuppressCloudTurbulence=NoMaxIce=-4MinIce=-4UpperWindGusts=NoSuppressWindTurbulence=NoSuppressWindVariance=NoWindTurbulence=NoTurbulenceRate=1.0,5.0TurbulenceDivisor=20,20,40,40SuppressAllGusts=NoMaxSurfaceWind=0WindLimitLevel=200WindDiscardLevel=400WindAjustAltitude=NoWindAjustAltitudeBy=2000SmoothBySimTime=NoWindSmoothing=NoWindSmoothness=2WindSmoothAirborneOnly=YesPressureSmoothness=0TemperatureSmoothness=0DisconnTrimForAP=NoZeroElevForAPAlt=NoThrottleSyncAll=NoWhiteMessages=NoShowPMcontrols=NoSpoilerIncrement=512MagicBattery=NoRudderSpikeRemoval=NoElevatorSpikeRemoval=NoAileronSpikeRemoval=NoReversedElevatorTrim=NoClockSync=NoClockSyncMins=5ClearWeatherDynamics=NoOwnWeatherChanges=NoTimeForSelect=4LoadFlightMenu=NoLoadPlanMenu=NoPauseAfterCrash=NoBrakeReleaseThreshold=75SaveDataWithFlights=NoZapSound=fireworkShortAircraftNameOk=SubstringUseProfiles=YesEnableMouseLook=NoDelayedMouseLookZoom=NoFSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0SimConnectUsed=10.0.61259.0[JoyNames]AutoAssignLetters=No0=FDS-FC10.GUID={F20C7400-2C01-11E5-8001-444553540000}[WideServer]WideFSenabled=YesAdvertiseService=1Port=8002Port2=9002[user]AllowShutdown=yes[Axes]PollInterval=10RangeRepeatRate=10[Programs]Run1="C:\Program Files\Project Magenta\pmSounds\pmSounds.exe"Run2="C:\Program Files\Project Magenta\pmSystems\pmsystems.exe"Close1=yes"C:\Program Files\Project Magenta\pmSounds\pmSounds.exe"[buttons]PollInterval=25ButtonRepeat=20,10[AutoSave]Next=1Interval=60Files=10SaveOnGround=NoAutoSaveEnabled=No[GPSout]GPSoutEnabled=No[GPSout2]GPSoutEnabled=No[sounds]Path=C:\FSX\Sound\Device1=Primary Sound DriverDevice2=Digital Audio (S/PDIF) (High Definition Audio Device)Device3=Digital Audio (S/PDIF) (High Definition Audio Device)[ClientNames]1=CLIENT2-PC2=CLIENT3-PC3=CLIENT5-PC4=CLIENT4-PCAnd this is the:WIDEFS CLIENT; PLEASE SEE WideFS documentation for parameter details; =====================================================[Config]Port=8002Window=-13,38,820,589Visible=noButtonScanInterval=20ClassInstance=0NetworkTiming=5,1MailslotTiming=2000,1000PollInterval=2000Port2=9002ResponseTime=18ApplicationDelay=0TCPcoalesce=NoWaitForNewData=500MaxSendQ=100OnMaxSendQ=LogNewSendScanTime=50Priority=3,1,2; -----------------------------------------------[user]Run1="C:\Program Files\Project Magenta\ABGC\abgc.exe"Close1=Yes"C:\Program Files\Project Magenta\ABGC\abgc.exe"Log=Errors+Allowshutdown=app; ===============================================[sounds]Path=C:\Users\client4\Desktop\WideFS\Sound\Device1=Primary Sound DriverAnd this the the WIDEFS SEVER; PLEASE SEE the documentation for parameter details; ==================================================[Config]Port=8002; -----------------------------------------------[user]AllowshutdownShutdown=YesLog=Errors+; =================it looks very different to the information in the documentation is some could look at it and help out with what i have done wrong.kind regards -
Hi
Thanks for the quick reply I was out of town and just got back,
I am using Project Magenta,i have tried close1=yes"______" and so of but nothing happen when I close fsx I enter this just below the last run4=
and i close them in the same way but they stay open ,not shore if i have to put the close in a different section.
i checked the doc and managed to start the programs via wide fs(and not via the win start up file) but still wide fs is in the start up win file what i really what is to be able to have nothing in the start up win file and have all clients and software start after fsx and once closing fsx for them to close, I am working on it but i believe i have missed something.
kind regards
-
Hello
I have 2 questions on the program start
1-I have managed to start the programs i want but cant get them to close with the kill function,(still working on it)
2-Is it possible over the network via fsuipc to start PM software on other PCs? i am using the easy way (start up file in win7)
kind regards
-
Hello Every one again
just tested abcaus fly the airbus it is NON campatible with mouse macros
NOTE: ONLY THE MCDU WORKS WITH MACROS THE REAST DO NOT FUNCTION i tryed all functions availeble
kind regards spiro
-
hello every one
simers sky airbus addon is NON-COMPATIBLE MOUSE-MACRO
regards spiro
-
hello everyone
sorry about the late replly but i got a bit lost ,
i am not so good with thease things as i undersand Mr Dowson the defualt a321 is no cababel of macros so i have to find a better addon a320
i hade used it in the past with wilcos airbus but i have PM know working on a network so i have to find a addon the will work
i thing this idea with what will work with mouse macros is a fantastic idea it will help alot to every one
kind regards and thanks for all the help
spiros
-
Hello Mr Dowson
my progress with fsuipc is going very good i have nearlly everything working :D
i tryed the mouse macro function for the first time and are having some problemes
i whant to assigine the ignition/start switch on my a320(fsx/pm)using the defualt a321
1:i go to button +switches and press[ create mouse macro] and i name a file of my choise and press ok
2: i then go with the mouse to press the function to on but nothing happenslike fsuipc is not detecting any mouse press
this happens what ever button i try to press
3: i then go back to FSUIPC and end mouse macro
4:i then go to see if my folder was created and there is no folder in the fs function i beleve its not there becase it can not detect anything
i have the last update of fsuipc and sp2 of fsx have i missed out on any inportant step
kind regards spiro
-
Hello Mr Dowson
i deleted all axes from the INI file and and just assigined it via the options page in fs as it was a simple joystick
and it is working 100% with no gost!!!!! :D
with out doing anything in the FSUIPC page
i got it so messed up as my first misstake mas i did not calibrate the pots with windows calibration program
so when i was going to the option page in fs and trying to assigine the lever fs could not detect it but in FSUIPC axis assignment it was detected!!
thats were i whent wrong and also i did not delet anything from the INI page ever and atempting so many diffrent things it was very messed up
i feel a bit stupid messing somthimg so easy up so much :cry:
thank you very much for you time and help
kind regards spiro
-
Hello Mr Dowson
i cleard all assigments and started from scratch like this
1, [AXIS ASSIGNMENT] i move the lever so it becomes activated in the center boxes in/out -16350 to 16350
2, in the left colume of the axis assignment i select:
[Type of action required]
[ send direct to FSUIPC calibration]
then i tick the first box and select [FLAPS]
3, i then go to [JOYSTICK CALIBRATION]
4, i go to page 6 FLAPS(direct) and calibrate as said in the FSUIPC users PDF manuel
i get the fap movement ok with no problem but i am still getting the gost movement, as i have flaps up with out me moving or pressing anything
the flaps go to full by them selfs it could be a hardwere problem here is the ini file once more just to see if i have the calibration and softwere part ok
[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=Yes
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
UseAxisControlsForNRZ=No
LeftBrake=-7039,7040
RightBrake=-7039,7040
FlapStarts=-16384,-12982,-2846,2021,14570
FlapEnds=-15203,-3471,1393,11921,16384
Flaps=0,16380/24
[ClientNames]
1=SPIROS-PC
2=CLIENT1
[Axes]
0=0U,256,D,23,0,0,0
1=0V,256
2=0V,BR,13560,14872,66065,0
3=0V,B,11472,13096,66064,0
4=2X,256,F,65698,0,0,0
5=2Y,1,D,23,0,0,0
6=3U,8
7=3U,B,-12260,-12180,65595,0
8=3U,B,-12204,-12172,65597,0
9=3U,B,-12940,-12316,65599,0
10=3U,B,-15222,-14606,65601,0
11=3U,B,-8456,-7671,65603,0
12=3S,256,D,23,0,0,0
13=3T,256,D,23,0,0,0
kind regards spiro
-
Hello Mr Dowson
Yes i thought i had mixed it all up :oops: :oops: :oops:
i will clear all assigments ans start fresh tonight
i had not calibrated the pot via windows joystick calibration :oops: :oops:
my pot is working ok from -16350 to 16350 in the range i whant it to
i will try the easy way as you explaned via the joystick calibration in fsuipc with dt feture
thank you very much
regards spiro
-
Hello Mr Dowson
Using the range assignments on the right-hand side?yes that is correct i ajustst the range for each postion
i do have dents on my flap lever but i can to calibrati it via the [joystick calibration] page it withh not change all the positions when i prees the set button
this is what i think is the INI file you asked about the joystick calibration
[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
UseAxisControlsForNRZ=No
LeftBrake=-7039,7040
RightBrake=-7039,7040
Flaps=-16143,-12356
[ClientNames]
1=SPIROS-PC
2=CLIENT1
[Axes]
0=0U,256,D,23,0,0,0
1=0U,B,-16375,-16007,65595,0
2=0U,B,-15607,-15575,65597,0
3=0U,B,-15078,-14534,65599,0
4=0U,B,-14045,-13405,65601,0
5=0U,BR,-12884,-12460,65603,0
6=0V,256
7=0V,BR,13560,14872,66065,0
8=0V,B,11472,13096,66064,0
9=2X,256,F,65698,0,0,0
10=2Y,1,D,23,0,0,0
11=3U,8
12=3U,B,-12260,-12180,65595,0
13=3U,B,-12204,-12172,65597,0
14=3U,B,-12940,-12316,65599,0
15=3U,B,-15222,-14606,65601,0
16=3U,B,-8456,-7671,65603,0
17=3T,256,D,23,0,0,0
kind regards spiro
-
hello Mr Dowson
sorry about the lat reply ok i understand how it works ok know
thank you very much it made me understad it much better :D :D
i am having some other problems with the axis assignment function
i assigine my flap lever in fsuipc axis assignment page ok all steps (flaps up,flaps1,flaps2,flaps3 and flaps down)
all ranges are ok and work perfectly fine with fs and PM no prob
but after some time with out me pressing any buttons or any levers the flaps move to full flaps by its self like a gost!! if i sightlly move the lever down a bit and then to flaps up
it gose to flaps up after some time again with out me moving anything it dose it again i belive this is a fs problem and not my axis assignment
i have changed 3 diffrent pots but the problem still is happening
kind regards spiro
-
hello
i have just got one of Mr Leo Bondnars bu0836x i am using progect magenta and fsx
what i would like to ask is when i whant to assigine a switch via fsuipc for progect magenta and fs do i just use the function offset word set
as i have the offset from progectmagenta and the parameter or dose this depend on the length of the offset???
what i am trying to explane is i notice alot of functions in the window of fsuipc(contor sent when button pressed) like offset byet set and lots of others
witch i do not understand
sence i have the parameters and offsets of project magenta in witch funtion should i assigne my switches best in
hope i make sence
kind regards spiro
-
Thank you very much
i updated FSUIPC
as for the FS flightplan file were can i find it so i rename it FSPLANS and get it ready to sheare
so i can see i what is going on
kind regards
-
hello ok
so i down load the update and extrack it were?? this will
be the first up date for me and dont know were to extract
to fsx mail file?
-
Hello Mr Dowson
i just got my registed copy of project magenta a320
i am using win7 64 bit /fsx
i am not using a network yet just 1 pc until next week
i have a registed copy of FSUIPC 4.552 and WIDE FS 6.8
i am having some problemes with PM , i load fsx and then pm
every this works ok exept when i input my DEP/ARR airport and aligin IRS on the MCDU i get a message
on the scrachpad of the MCDU saying NAV ACCUR UPGRADE
and on the ND i have a diffrnt route showing then the one i inputed in the MCDU
i run the file cheak and it asking
1 update WIDE FS version
2 sheare FS flightplan over the net work as FSPLAN
how is this done in win7
i am not using a net work
i have spoken with Jonathen from PM he dose not use win7
should i update FSUIP and WIDE FS
kind regards spiro
-
Thanks Mr Dowson
i have the drivers from the site they only work with PM i have asked Mr Sanders at cockpitsonic
and i am waiting for an answer for AST softwere
i just thought to ask mabye you knew somthing about thisor some one
thank you very much
regards spiro
-
hello Mr Dowson
this might be a silly qestion but i will ask anyway
i have a cockpitsonic fcu airbus moduel i got it second hand and i have tested it with Progect Magenta airbus demo
works like a charm
my qestion is can i get it to work with other softwere??
on the a321 default only some knobs work it dose not fully work
but i would like to use another softwere can this be done by some one to make me drivers so it will work with other softwere
dont get me wrong i do not have anything with Progect Magenta it is very nice softwere as i saw in the demo but i allredy
have a softwere witch i am use to.
kind regards spiro
Start and close Project Magenta MCP with FSUIPC
in FSUIPC Support Pete Dowson Modules
Posted
Hi
I added this function it works great ,i will try to use a push button from one of the I/O Boards.
I kindly thank you very much of the help,tips and quick reply's
regards