spiro

Hi I added this function it works great ,i will try to use a push button from one of the I/O Boards. I kindly thank you very much of the help,tips and quick reply's regards

Hi I got it working just one small thing i dont get from the documentaion, I want to set it up as when i close FSX for all softwear and pc to shut down,reading the documetation i set it as it says but once i close fsx it dose not close the clients If when fsx is runnung i press the close widefs application witch comes with wide fs i works all pc close down, I first set in the wide sever ini witch is in the fsuipc [user] Autoshutdown=yes And then in the client under user i set Allowshutdown=yes This way it works with the close widefs application I also check the widesever0 log and i sed sending close signal to clients (something like that) I am looking at the documentaion again but dont know were i have gon worng Regards

Hi I fixed it by the way you explained Run1=CLOSE,"_______" It works perfict thanks a alot!!!! I tryed the same thing on the client but got error [267] and softwear will not open dose the clients need somethig diffrent? Regards

Hi That explains it to me i was thinking Evey line was a step so run all programs and the close all programs, so i get it for each progam i want to run and close Its one line Run1=CLOSE,"----------" That it I will try it tomorrow ,it clears every thing know Let you how it gose thanks alot for the help Regards

Hi Run1 is the same program as run 2 is what i am trying to close,so i am trying to just open it Run 1="______" And then close it Run2=CLOSE,"_______" I tryed it with "--" but had the same resault If its only 1 program I am trynig to get it working and the try on the other clients Regards

HI I read the documentaion and try as it says but still no luck Run1="(program i want to run)" Run2=CLOSE,(program i reqested to run) I tryed KILL too but still dose not close The program is PM sounds It start ok but dose not close My English might not be so good but still dont get it. Regards

Hi Thanks for the quick reply i did look at the documentation but just did not get it right , so it will have to be something like this: Run1="_____" Run2=close=yes"________" regards

Hi Thanks for the tip i understand that starting WideFS via the win7 start up and getting the programs to start up via WideFS is good and got it working just cant get them to close. Another thing that my sound stupid on my side,I have read the documentation one thing i don't understand is in my config files ti looks like a lot of things are missing the thing i don't understand is , is that how it is and depending on my needs i go and put the functions i want or is something wrong with my config file. sorry if its a stupid question. i have attached my fsuipc config and one of my clients WideFS config files Not shore were the problem is FSUIPC (FSX MODULES FOLDER) [General] UpdatedByVersion=4939n History=OJHJZIMW8UCV0VC844XIY AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes OOMcheck=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No InitDelayDevicesToo=No NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=No 0=FDS-FC1 0.GUID={F20C7400-2C01-11E5-8001-444553540000} [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [user] AllowShutdown=yes [Axes] PollInterval=10 RangeRepeatRate=10 [Programs] Run1="C:\Program Files\Project Magenta\pmSounds\pmSounds.exe" Run2="C:\Program Files\Project Magenta\pmSystems\pmsystems.exe" Close1=yes"C:\Program Files\Project Magenta\pmSounds\pmSounds.exe" [buttons] PollInterval=25 ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [sounds] Path=C:\FSX\Sound\ Device1=Primary Sound Driver Device2=Digital Audio (S/PDIF) (High Definition Audio Device) Device3=Digital Audio (S/PDIF) (High Definition Audio Device) [ClientNames] 1=CLIENT2-PC 2=CLIENT3-PC 3=CLIENT5-PC 4=CLIENT4-PC And this is the: WIDEFS CLIENT ; PLEASE SEE WideFS documentation for parameter details ; ===================================================== [Config] Port=8002 Window=-13,38,820,589 Visible=no ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=2000,1000 PollInterval=2000 Port2=9002 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 ; ----------------------------------------------- [user] Run1="C:\Program Files\Project Magenta\ABGC\abgc.exe" Close1=Yes"C:\Program Files\Project Magenta\ABGC\abgc.exe" Log=Errors+ Allowshutdown=app ; =============================================== [sounds] Path=C:\Users\client4\Desktop\WideFS\Sound\ Device1=Primary Sound Driver And this the the WIDEFS SEVER ; PLEASE SEE the documentation for parameter details ; ================================================== [Config] Port=8002 ; ----------------------------------------------- [user] AllowshutdownShutdown=Yes Log=Errors+ ; ================= it looks very different to the information in the documentation is some could look at it and help out with what i have done wrong. kind regards

Hi Thanks for the quick reply I was out of town and just got back, I am using Project Magenta,i have tried close1=yes"______" and so of but nothing happen when I close fsx I enter this just below the last run4= and i close them in the same way but they stay open ,not shore if i have to put the close in a different section. i checked the doc and managed to start the programs via wide fs(and not via the win start up file) but still wide fs is in the start up win file what i really what is to be able to have nothing in the start up win file and have all clients and software start after fsx and once closing fsx for them to close, I am working on it but i believe i have missed something. kind regards

Hello I have 2 questions on the program start 1-I have managed to start the programs i want but cant get them to close with the kill function,(still working on it) 2-Is it possible over the network via fsuipc to start PM software on other PCs? i am using the easy way (start up file in win7) kind regards

Hello Every one again just tested abcaus fly the airbus it is NON campatible with mouse macros NOTE: ONLY THE MCDU WORKS WITH MACROS THE REAST DO NOT FUNCTION i tryed all functions availeble kind regards spiro

hello every one simers sky airbus addon is NON-COMPATIBLE MOUSE-MACRO regards spiro

hello everyone sorry about the late replly but i got a bit lost , i am not so good with thease things as i undersand Mr Dowson the defualt a321 is no cababel of macros so i have to find a better addon a320 i hade used it in the past with wilcos airbus but i have PM know working on a network so i have to find a addon the will work i thing this idea with what will work with mouse macros is a fantastic idea it will help alot to every one kind regards and thanks for all the help spiros

Hello Mr Dowson my progress with fsuipc is going very good i have nearlly everything working :D i tryed the mouse macro function for the first time and are having some problemes i whant to assigine the ignition/start switch on my a320(fsx/pm)using the defualt a321 1:i go to button +switches and press[ create mouse macro] and i name a file of my choise and press ok 2: i then go with the mouse to press the function to on but nothing happenslike fsuipc is not detecting any mouse press this happens what ever button i try to press 3: i then go back to FSUIPC and end mouse macro 4:i then go to see if my folder was created and there is no folder in the fs function i beleve its not there becase it can not detect anything i have the last update of fsuipc and sp2 of fsx have i missed out on any inportant step kind regards spiro

Hello Mr Dowson i deleted all axes from the INI file and and just assigined it via the options page in fs as it was a simple joystick and it is working 100% with no gost!!!!! :D with out doing anything in the FSUIPC page i got it so messed up as my first misstake mas i did not calibrate the pots with windows calibration program so when i was going to the option page in fs and trying to assigine the lever fs could not detect it but in FSUIPC axis assignment it was detected!! thats were i whent wrong and also i did not delet anything from the INI page ever and atempting so many diffrent things it was very messed up i feel a bit stupid messing somthimg so easy up so much :cry: thank you very much for you time and help kind regards spiro

Hello Mr Dowson i cleard all assigments and started from scratch like this 1, [AXIS ASSIGNMENT] i move the lever so it becomes activated in the center boxes in/out -16350 to 16350 2, in the left colume of the axis assignment i select: [Type of action required] [ send direct to FSUIPC calibration] then i tick the first box and select [FLAPS] 3, i then go to [JOYSTICK CALIBRATION] 4, i go to page 6 FLAPS(direct) and calibrate as said in the FSUIPC users PDF manuel i get the fap movement ok with no problem but i am still getting the gost movement, as i have flaps up with out me moving or pressing anything the flaps go to full by them selfs it could be a hardwere problem here is the ini file once more just to see if i have the calibration and softwere part ok [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=Yes ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 UseAxisControlsForNRZ=No LeftBrake=-7039,7040 RightBrake=-7039,7040 FlapStarts=-16384,-12982,-2846,2021,14570 FlapEnds=-15203,-3471,1393,11921,16384 Flaps=0,16380/24 [ClientNames] 1=SPIROS-PC 2=CLIENT1 [Axes] 0=0U,256,D,23,0,0,0 1=0V,256 2=0V,BR,13560,14872,66065,0 3=0V,B,11472,13096,66064,0 4=2X,256,F,65698,0,0,0 5=2Y,1,D,23,0,0,0 6=3U,8 7=3U,B,-12260,-12180,65595,0 8=3U,B,-12204,-12172,65597,0 9=3U,B,-12940,-12316,65599,0 10=3U,B,-15222,-14606,65601,0 11=3U,B,-8456,-7671,65603,0 12=3S,256,D,23,0,0,0 13=3T,256,D,23,0,0,0 kind regards spiro

Hello Mr Dowson Yes i thought i had mixed it all up :oops: :oops: :oops: i will clear all assigments ans start fresh tonight i had not calibrated the pot via windows joystick calibration :oops: :oops: my pot is working ok from -16350 to 16350 in the range i whant it to i will try the easy way as you explaned via the joystick calibration in fsuipc with dt feture thank you very much regards spiro

Hello Mr Dowson yes that is correct i ajustst the range for each postion i do have dents on my flap lever but i can to calibrati it via the [joystick calibration] page it withh not change all the positions when i prees the set button this is what i think is the INI file you asked about the joystick calibration [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 UseAxisControlsForNRZ=No LeftBrake=-7039,7040 RightBrake=-7039,7040 Flaps=-16143,-12356 [ClientNames] 1=SPIROS-PC 2=CLIENT1 [Axes] 0=0U,256,D,23,0,0,0 1=0U,B,-16375,-16007,65595,0 2=0U,B,-15607,-15575,65597,0 3=0U,B,-15078,-14534,65599,0 4=0U,B,-14045,-13405,65601,0 5=0U,BR,-12884,-12460,65603,0 6=0V,256 7=0V,BR,13560,14872,66065,0 8=0V,B,11472,13096,66064,0 9=2X,256,F,65698,0,0,0 10=2Y,1,D,23,0,0,0 11=3U,8 12=3U,B,-12260,-12180,65595,0 13=3U,B,-12204,-12172,65597,0 14=3U,B,-12940,-12316,65599,0 15=3U,B,-15222,-14606,65601,0 16=3U,B,-8456,-7671,65603,0 17=3T,256,D,23,0,0,0 kind regards spiro

hello Mr Dowson sorry about the lat reply ok i understand how it works ok know thank you very much it made me understad it much better :D :D i am having some other problems with the axis assignment function i assigine my flap lever in fsuipc axis assignment page ok all steps (flaps up,flaps1,flaps2,flaps3 and flaps down) all ranges are ok and work perfectly fine with fs and PM no prob but after some time with out me pressing any buttons or any levers the flaps move to full flaps by its self like a gost!! if i sightlly move the lever down a bit and then to flaps up it gose to flaps up after some time again with out me moving anything it dose it again i belive this is a fs problem and not my axis assignment i have changed 3 diffrent pots but the problem still is happening kind regards spiro

hello i have just got one of Mr Leo Bondnars bu0836x i am using progect magenta and fsx what i would like to ask is when i whant to assigine a switch via fsuipc for progect magenta and fs do i just use the function offset word set as i have the offset from progectmagenta and the parameter or dose this depend on the length of the offset??? what i am trying to explane is i notice alot of functions in the window of fsuipc(contor sent when button pressed) like offset byet set and lots of others witch i do not understand sence i have the parameters and offsets of project magenta in witch funtion should i assigne my switches best in hope i make sence kind regards spiro

Thank you very much i updated FSUIPC as for the FS flightplan file were can i find it so i rename it FSPLANS and get it ready to sheare so i can see i what is going on kind regards

hello ok so i down load the update and extrack it were?? this will be the first up date for me and dont know were to extract to fsx mail file?

Hello Mr Dowson i just got my registed copy of project magenta a320 i am using win7 64 bit /fsx i am not using a network yet just 1 pc until next week i have a registed copy of FSUIPC 4.552 and WIDE FS 6.8 i am having some problemes with PM , i load fsx and then pm every this works ok exept when i input my DEP/ARR airport and aligin IRS on the MCDU i get a message on the scrachpad of the MCDU saying NAV ACCUR UPGRADE and on the ND i have a diffrnt route showing then the one i inputed in the MCDU i run the file cheak and it asking 1 update WIDE FS version 2 sheare FS flightplan over the net work as FSPLAN how is this done in win7 i am not using a net work i have spoken with Jonathen from PM he dose not use win7 should i update FSUIP and WIDE FS kind regards spiro

Thanks Mr Dowson i have the drivers from the site they only work with PM i have asked Mr Sanders at cockpitsonic and i am waiting for an answer for AST softwere i just thought to ask mabye you knew somthing about thisor some one thank you very much regards spiro

hello Mr Dowson this might be a silly qestion but i will ask anyway i have a cockpitsonic fcu airbus moduel i got it second hand and i have tested it with Progect Magenta airbus demo works like a charm my qestion is can i get it to work with other softwere?? on the a321 default only some knobs work it dose not fully work but i would like to use another softwere can this be done by some one to make me drivers so it will work with other softwere dont get me wrong i do not have anything with Progect Magenta it is very nice softwere as i saw in the demo but i allredy have a softwere witch i am use to. kind regards spiro