texfly
-
Posts
38 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by texfly
-
-
Great stuff. I have modified the code and added few functions...all works!
I have a question:
I would like to have a LED ON (GoFlight module) when, for example, the ignition switch is AUTO.
I have the instruction gfd.SetLights(GFT8, 0, 7) but I'm not sure how to read that specific value (Ignition switch status).
Thanks for the help.
-
Ok, thanks. It would be good to have the list before so the user can decide if the updates are worth the trouble of upgrading it.
-
Thanks. I got that part. I was wondering if there a release list with the changes applied to the new version...
-
Hi, I got an email form the vendor from where I bought Ultimate checklist announcing a new release. Where can I find the latest updates?
Thanks.
-
I believe 800x600 because I use a small 8" monitor for it...
-
Got it! Thanks.
I will try to configure my buttons that way...one more question: when I run the software it doesn't show up in full window mode. The bottom right corner doesn't show up and I can't stretch/resize the window. Just to give yo ua clue the "Connect to FSX" button is visible only in hal. Any idea?
-
I cannot find the manual. I have the product installed but when I click on manual I get nothing. I bought the software on Sunday from simMarket, installation ok.
Where can I download the PDF?
Thanks.
-
Hi,
I do not need to display the checklist on FSX. I got the spacebar part...what do you mean about "set the offsets to buttons and check the items" ?
Thanks.
-
No, I'm using it through my WideFS even if I'm not even connecting to FSX...as far as I know the connection is only needed if I want to see the LUA screen. The software does not check the items automatically.
Thanks.
-
Hello,
Is there any way of changing TABs (for example from Pre-start to start) using the keyboard?
I can automate the single checklist item (space bar and arrow up or down) and I would like to navigate through the TABs with a key.
Thanks.
Tex
-
Great, thanks.
One more question...I want to edit my LUA code while FSUIPC is running so I can troubleshoot better. Does the "RELOAD ALL BUTTONS" reload/refresh the LUA scripts inside the Modules folder as well? If not how can I do this?
-
Pete,
Is it better to create single LUA programs and assign them to a button? For example APU.LUA then link it to the button I want to program?
What about ipcready.lua? Is it possible to code all the offset/buttons monitoring inside only that file?
My understanding is that ipcready.lua loads automatically after FSUIPC completes the starting phase...
-
Thanks Pete, I will try it tonight. Regarding the debuggg.do I need to launch the "LUA Debug" and turn on the FSUIPC logging?
-
Hi Pete,
I tested it and I'm still having problems. My code is below. Any suggestions? When I push the button I can see the 0B54 offset changing value using FSInterrogate and the light on the cockpit works, so the button is ok.
As always, thanks for your help.
---------------------------------------------
-- monitor APU status and turn LED on if ON
function APU(offset, value)
model = GFP8
unit = 0
id = 1
gfd.SetBright(model, unit, 15)
if value > 99 then
gfd.SetLight(model, unit, id)
else
gfd.ClearLight(model, unit, id)
end
end
event.offset("0B54", "FLT", "APU")
---------------------------------------------
The Pushback works properly, here is my code:
-- Pushback button GFP8 UNIT 0
function PushBack(offset, value)
model = GFP8
unit = 0
id = 7
gfd.SetBright(model, unit, 15)
if value == 0 then
gfd.SetLight(model, unit, id)
else
gfd.ClearLight(model, unit, id)
end
end
function SetPushBack(model, unit)
gfd.GetValues(model, unit)
if gfd.TestButton(7) then
ipc.writeUB("31F4",0)
else
ipc.writeUB("31F4",3)
end
end
event.offset("31F0", "UB", "PushBack")
event.gfd(GFP8, 0, "SetPushBack")
-
Pete thanks for the reply. I have the latest version of FSUIPC with FSX.
I will test changing "UB" to "FLT". I'm trying to turn the LED "1" ON of a GoFlight module (GFP8) when the APU is ACTIVE.
I tried 0B52 with no luck. The Push Back works great. I assign the button function using FSUIPC offset-ready-list and turn the LED on using LUA. I wanted to do the same with the APU...
-
Hello,
I'm using LUA to control the LEDs of several GoFlight modules and everything works great except for one offset: APU!
I have tried 0B51, 0B52, 0B53, 0B54, 0B58 and 0B5C!
event.offset("0B5C", "UB", "APU")
The function APU should set one of the LEDs on.
For whatever reason I can't turn any LED on when the APU is on.
Any idea?
Thanks!
-
Thanks Pete. I got my answers.
-
Hello,
I'm looking for a few offsets to use with LUA:
1) NAV/GPS: I want to switch the NAV/GPS toggle. The only one I found is below. Does it work with FSX? Is there anything else?
132C
NAV/GPS switch, in FS2000 & FS2002. 0=NAV, 1=GPS
2) Fill fuel tank
3) Transponder toggle S-C-I (Standby, Mode C, Ident)
Any help is appreciated!
-
Pete, following up this conversation...if I have two GFT8 modules connected to the same remote PC, are they going to be assigned always the same ID?
I appreciated all your help with this!
-
Thanks Pete and sorry for the confusion.
The only think I wanted to do is using the script I published above (which works on a local GFT8 panel) with another GFT8 panel connected to a remote PC.
I guess I just need to copy the script in the WideClient folder, configure the correct ID and it should work?
-
Hi Pete,
Let me go one step back with my question...can I link a .LUA file saved in the WideClient folder to a GFT8 button event connected to a remote PC? Does FSUIPC scan (and add in the .INI file) for all .LUA files including the ones stored remotely?
-
Pete, I have the latest FSUIPC/WideFS (registered).
If I copy the LUA file in the Wideclient folder how do I call a function contained in that remote file? Is FSUIPC scanning the WideFS LUA files as well?
-
Great, it worked. One more question....can I use LUA to control a GoFlight panel (i.e. GFT8) connected to a remote pc? I can "see" the switches via WideFS/FSUIPC but I don't know which ID to assign in the code.
-
Thanks Djeez. Tha will do part of the trick...what about adding new LUA scripts? Do I need to restart FSX each time?
Duke Turbine Scripts
in User Contributions
Posted
Anyone please?