Jump to content
The simFlight Network Forums

ducaud

Members
  • Content Count

    22
  • Joined

  • Last visited

Community Reputation

0 Neutral

About ducaud

  • Rank
    Member
  1. Hello Pete, thanks for your reply, here is text of the Wideclient log file. I believe you are correct when you mention the possibility of a memory leak. In a couple of occasions I have got a message in FS9 telling me that I have run out of available memory and it takes me out of the program. How can I find out what is causing it ? Thanks Juan ********* WideClient Log [version 6.78] Class=FS98MAIN ********* Date (dmy): 26/09/10, Time 13:58:54.268: Client name is JGD-VAIO 1779 Attempting to connect now 1950 Server = DUCAUD-PC 2262 Trying TCP/IP host "DUCAUD-PC" port 8002 ... 2262Okay, IP Address = 192.168.1.103 2262 Connection made okay! 9953 New Client Application: "FSC" (Id=2468) 3770326 Timed out response: connection assumed lost! 3770342 Ready to try connection again 3770435 Timed out response: connection assumed lost! 3772385 Attempting to connect now 3773399 Trying to locate server: Need details from Server Broadcast 3779140 Server = DUCAUD-PC 3779452 Trying TCP/IP host "DUCAUD-PC" port 8002 ... 3779452Okay, IP Address = 192.168.1.103 3779452 Connection made okay! 5978552 Timed out response: connection assumed lost! 5978552 Ready to try connection again 5978614 Timed out response: connection assumed lost! 5980611 Attempting to connect now 5981406 Server = DUCAUD-PC 5981718 Trying TCP/IP host "DUCAUD-PC" port 8002 ... 5981718Okay, IP Address = 192.168.1.103 5981718 Connection made okay! 6066801 ****** End of session performance summary ****** 6066801 Total time connected = 6050 seconds 6066801 Reception maximum: 66 frames/sec, 5961 bytes/sec 6066801 Reception average whilst connected: 42 frames/sec, 316 bytes/sec 6066801 Transmission maximum: 8 frames/sec, 222 bytes/sec 6066801 Transmission average whilst connected: 0 frames/sec, 18 bytes/sec 6066801 Max receive buffer = 5323, Max send depth = 2, Send frames lost = 1 6066801 **************** Individual client application activity **************** 6066801 Client 2468 requests: 192269 (Ave 31/sec), Data: 33215063 bytes (5490/sec), Average 172 bytes/Process 6066801 ********* Log file closed (Buffers: MaxUsed 5, Alloc 442939 Freed 442938 Refused 0) *********
  2. I have been using FSUIPC V 3,98a and WideFS 6.78 with my FS2004 running on a Windows 7 64 bit machine. I use the WideFS utility to connect to FS Commander V8.6 , to see the rolling map and the AI planes. I never had problems with connection before. Lately I have noticed that after a while of running fine, My plane icon and the Ai planes stop moving on the FS Commander screen, and I see that the Wide FS says "waiting to connect" then when it does I get a connection error #14 message on FSCommeander. Volker told me that it was a WideFS connection issue and not related to his software. I also found a WideServer log file on the FS9/Modules folder which shows some disconnections , I am adding the text at the end of this message. I appreciate if somebody can help me sort this out. Thanks Juan ********* WideServer.DLL Log [version 6.78] ********* Blocksize guide = 4096 (double allowed) Date (dmy): 25/09/10, Time 15:39:17.141: Server name is DUCAUD-PC 117750 Initialising TCP/IP server 117750 Initialising IPX/SPX server 117750 IPX/SPX socket() failed [Error=10044] Socket type not supported 117750 Failed to start IPX/SPX Server 117750 Initialising UDP/IP server 118842 Broadcasting service every 1000 mSecs 120371 Incoming connection Accepted ok (skt=2620) TCP 120651 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=2620) TCP 3495483 Client socket unused for too long: removing (skt=2620) TCP 12601075 Incoming connection Accepted ok (skt=2620) TCP 12601340 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=2620) TCP 12637095 Error 10053: client socket disconnected at Client: removing (skt=2620) TCP 12696095 Incoming connection Accepted ok (skt=11720) TCP 12696407 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=11720) TCP 14573052 Retried 21 times: sends blocked for over 5 secs! (0 of 920 sent), Error=10035 (skt=11720) TCP 14578060 Retried 19 times: sends blocked for over 5 secs! (0 of 925 sent), Error=10035 (skt=11720) TCP 14583036 Error 10035: sends blocked for too long! Removing client (skt=11720) TCP 14603254 Incoming connection Accepted ok (skt=12748) TCP 14603566 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12748) TCP 14622707 Retried 21 times: sends blocked for over 5 secs! (0 of 113 sent), Error=10035 (skt=12748) TCP 14624220 Incoming connection Accepted ok (skt=12752) TCP 14624486 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12752) TCP 14627949 Retried 20 times: sends blocked for over 5 secs! (0 of 121 sent), Error=10035 (skt=12748) TCP 14632660 Error 10035: sends blocked for too long! Removing client (skt=12748) TCP 14642769 Retried 20 times: sends blocked for over 5 secs! (0 of 134 sent), Error=10035 (skt=12752) TCP 14648011 Retried 20 times: sends blocked for over 5 secs! (0 of 150 sent), Error=10035 (skt=12752) TCP 14652987 Error 10035: sends blocked for too long! Removing client (skt=12752) TCP 14714264 Incoming connection Accepted ok (skt=11720) TCP 14714342 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=11720) TCP 14784387 Client socket unused for too long: removing (skt=11720) TCP 14825243 Incoming connection Accepted ok (skt=12748) TCP 14825368 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12748) TCP 14884960 Client socket unused for too long: removing (skt=12748) TCP 14935255 Incoming connection Accepted ok (skt=12748) TCP 14935349 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12748) TCP 15005799 Client socket unused for too long: removing (skt=12748) TCP 15032257 Incoming connection Accepted ok (skt=12788) TCP 15032537 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12788) TCP 15106201 Client socket unused for too long: removing (skt=12788) TCP 15141301 Incoming connection Accepted ok (skt=12788) TCP 15141410 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12788) TCP 15162252 Incoming connection Accepted ok (skt=12744) TCP 15162330 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12744) TCP 15186495 Client socket unused for too long: removing (skt=12788) TCP 15206697 Client socket unused for too long: removing (skt=12744) TCP 15250284 Incoming connection Accepted ok (skt=12756) TCP 15250580 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12756) TCP 15271266 Incoming connection Accepted ok (skt=12748) TCP 15271484 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12748) TCP 15307052 Client socket unused for too long: removing (skt=12756) TCP 15322247 Incoming connection Accepted ok (skt=12788) TCP 15322325 Connected to computer "JGD-VAIO" running WideClient version 6.780 (skt=12788) TCP 15327208 Client socket unused for too long: removing (skt=12748) TCP 17340557 Error 10053: client socket disconnected at Client: removing (skt=12788) TCP 17668564 Close signalled to clients 17669672 Closing down now ... Memory managed: Offset records: 314 alloc, 314 free Read buffer usage: 3551 alloc, 3551 free, max in session: 1 Write buffer usage: 615102 alloc, 615102 free, max in session: 1 Throughput maximum achieved: 53 frames/sec, 8370 bytes/sec Throughput average achieved for complete session: 3 frames/sec, 485 bytes/sec Average receive rate from "JGD-VAIO": 0 frames/sec, 16 bytes/sec ********* Log file closed *********
  3. Volker the topic you sent me to read does not apply to my situation, as in my case I never loose connectivity between the FS server PC and the WideFs Client PC. It always reads as follows: "WideClient FS98 Eliminator - Connected " Even when the planes stop moving on the map display WideFs is always connected to the Wide FS Server PC. Juan
  4. Thanks for your Reply Volker. I am not saying that FS Commander is the problem. I am not putting the blame on it, I am just trying to find out what is wrong. Maybe somebody here has experienced the same problem, and found out, how to solve it. These configuration has been working perfectly for months. And when I start FS then FSC I connect and it works fine then it looks like FSC stops receiving info from FS for the plane and also the Ai planes as they stop moving on the map. Sometimes it gets fixed for a few minutes by turning WideFs off then on again. I am just looking for ideas on how to fix this. Juan
  5. Thanks for your reply, I have the following configuration: Windows 7 - 64 bit FS 2004 (FS9) FSUIPC V 3.98a WIDEFS V 6.78 FSC V.8.6 Build 101209 Database Manager V. 8.6 Build 021209 and, yes I have the latest FSUIPC and WIDEFS versions, both registered. Thanks Juan
  6. I have been using FSC V 8.6 for quite some time and its connected to FS2004 via Wide FS. It has always been working perfectly. Lately I have noticed that the display freezes, (not the program, as I can zoom in and out and use the options) My plane and the AI planes just stop moving. Then what I did was shut down FS Wide , restart and usr the option in TAB GPS, connect to FS and it would restart. But lately I am getting Unable to connect error message#14. Does anybody knows what is happening. I am using Windows 7. THanks Juan
  7. Thanks for your reply Pete, let me try to clarify the problem I am having. Let me first explain how I assign and calibrate the joystick commands (CH Flight Yoke, CH Pro Pedals, and CH Throttle Quadrant) to be used with my PMDG 737. I start by disabling joysticks in FS9 For axis assignments I used the "aircraft specific" option whithin FSUIPC. 1. Axis Assignments Flight Yoke : Joy# 2- x axis = Aileron y axis = Elevators Pro Pedals: Joy#1 - z axis = Rudder x axis = Left Brake y axis = Right Brake CH Throttle Quadrant: Joy#0 - x axis = throttle 1, y axis = throttle2, R axis Spoilers 2.Joystick Calibration Page 1 of 11 Main Flight Controls Here I calibrate Ailerons, Elevator and Rudder. Page 2 of 11 Prop Mixture and Brakes Here I calibrate Left and Right Brakes Page 3 of 11 Separate throttles per engine. Here I calibrate separately engines 1 and 2 I have working thrust reversers when pulled back of the detent. Only issue with the PMDG 737 calibration is that, before every flight I have to calibrate the elevator. It seems to lose the calibration. everything else works fine. Picture 1 shows the CH throttle and how I use it with both PMDG 737 and PMDG 747. The problem arises when I try to do the same for the PMDG 747. All the control surfaces worked perfect with the exception of the throttles. Here is how I setup the 747: I assigned the axis in the same way I have done with the PMDG 737, only difference is that I have to extra axis to assign, axis Z and axis V for the 3 rd and 4th engines respectively. picture 2 shows the engine calibration page, Notice that engines 1,3, and 4 have the word "Direct in parenthesis" engine 2 does not. After the calibration all engines in detent (see picture 3). Now I move all four engine levers to full and only engines 1,3,and 4 go to full, engine 2 does not move. see pic 4. I have the joysticks disabled on FS9 I have checked the assignment and engine 2 is not assigned to any other axis. If I go back to the assignment page, press the rescan button, and move the second lever it recognizes it correctly as throttle 2. I hope this make the issue that I am having more clear. Thanks again for your help. Juan
  8. I have spent days trying to make my CH throttle quadrant to work properly. I have read John Cooks guide and it really help me, I have been able to configure and calibrate it to use it with PMDG 737 NG, and works really nice even using thrust reversers. I have used aircraft specific settings, as I fly aircraft with different configurations. My nightmares started when I try to configure my PMDG 747 (Both are the FS9 versions). I have not been able to make the four throttles to work correctly. Even after giving up on using reversers, I can not still get it to work. I have set up the option "map to 4 throttles" on page one of the calibration, then I go to page three to calibrate. Once there I get the following options (see attached pic) 1. Calibrate throttle 1 and throttles 2,3 and 4 will copy throttle 1 ,but throttles 1,3, and 4 have the word "direct" in parenthesis,and throttle 2 does not. Also in the attached picture there are two boxes for the in and out of each throttle. Even though the calibration is done at throttle 1, you can still can see the values move when moving the levers, all except throttle 2. Once I calibrate throttle 2 is always at full throttle. I first thought that there is something physcally wrong with throttle 2 of the CH quadrant, but it works perfectly in the PMDG 737 NG. What Is wrong? Thank you Juan Ducaud I have FSUIPC version 3.98A and Windows 7 64bit.
  9. Thanks for your reply Volker, I don't know what is wrong, but I believe that the issue is related to where FSC8 looks for its AFCAD files. I have asked this question before but I have not got an answer. I that FSC8 looks for the AFCADS in all of FS9 directories? The extension "LOG" is not allowed to be send through this forum, I will send it to your email address. Thanks Juan
  10. I have been having problems with 90% of my addon sceneries. FS9 correctly recognizes the modified AFCADS included with the addon sceneries, but FS commander still only reads the default AFCADS. I am attaching 4 pictures on which the problem is clearly shown. They were all taken at the same time. Where does FSC8 looks for its AFCAD files? Where should I place all the AFCADS for FSC8 to read them and display them correctly? Why FS9 reads them correctly and FSC8 not? I have read all of the topics relateded to updating of the databasest here, I have updated the databases several times. Thanks Juan G. Ducaud My setup is: Windows 7, 64 bit FS 2004 FSC 8.6 FSUIPC 3.98a
  11. Thanks Volker, I have installed FSC on the root of the C drive, not under program files, and I have also disabled user controls. I have sent you the file via email. Juan
  12. That is a good question Vaughan, I have plenty of add on scenery, and here is the first time that I noticed this because I was in FS9 taking off from a runway I could perfectly see in FS9, while the laptop next to my pc on which I run FS Commander in Wide FS showed my aircraft in the middle of nowhere. I have found already three airports like this. In the other ones it is possible that the stock AFCADs are similar with modified ones. Do you know how FS Commander decides which one to use? Thanks Juan
  13. Thanks Vaughan, I have FSC version 8.6. I opened the FSCDBM_FS09.LOG file and both add on sceneries are correct and their status is active. there are no errors on the file. If I go into MSFS and go top down view I can see all of the features on the addon scenery. They are active. If I look at the map from FSC I only see the default airport. Thanks Juan
  14. Hi Volker, I have forgot to include my configuration. Here it is. Config: Windows 7 64bit FS 2004 FS Commander 8.6 FSUIPC version 3.96 Wide FS 6.78 Thanks, Juan
  15. Thanks for your reply, yes I have updated the database many times after I add scenery. As a matter of fact the same thing happens with KMIA, FS Commander loads the stock scenery.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.