Jump to content
The simFlight Network Forums

AW1312

Members
  • Posts

    80
  • Joined

  • Last visited

Posts posted by AW1312

  1. Hello Pete

     

    I wonder if I could have your advice on the following please?

     

    I'm trying to achieve smooth movements on the control column. I have noticed on the elevator position display (might not be quite the right terminology) 

    when I move the column forward in order to descend,  the amount of movement of the column is not proportionate to the  amount of movement on the display and as a result

    it is not easy to maintain the smoothness I am looking for. It's ok when pulling back on the column so I was wondering is there a setting where I can adjust only the forward movement in FSUIPC

    or is it possible I need a new pot?

     

    I hope that makes sense.

     

    Thank you

     

    Regards

     

    Alan W

  2. Hello Pete

     

    I've been looking around the forums regarding what CG to enter into the FMC and came across a post  which you answered by stating

    go to logging tab enter 2EFS as the offset and FLT64 as the type followed by checking the AdvDisplay tick box.

     

    I attempted to type in the four digits 2EFS but it would allow only three.

     

    I'm using FS9,Prosim and Jetstream aircraft.

     

    Can you help please?

     

    Thank you

     

    Regards

     

    Alan W

     

      

  3. Hi Pete

     

    Been working through it and getting some good results but one question with regard to the aileron (could apply to other controls)- turning left produces a smooth turn but turning right produces a 'bitty' movement.

     

     

    I have tried several settings but nothing seems to help. Is this a calibration issue? If it is fair enough I'll keep going with it.

     

    Thank you

     

    Regards

     

    Alan W

  4. Hello Pete

     

    I don't quite know what's going on in my sim with the axis assignments.

     

    I'm trying to calibrate the Elevator, Aileron and steering tiller. All three are connected to a brand new BU0836X board and are connected firmly in the correct connector on the board.

     

    I have the latest version of FSUIPC-z5.

     

    In the windows calibration window the cursor for the elevator and aileron are fluid in their movement and then moving onto the tiller the blue (not sure of the correct terminology) band is not fluid in as much when

    the tiller is moved this 'blue band' ' jumps'  from one side to the other. Other times the tiller calibration is ok but then the  other two axis suffer from this lack of smooth movement. I can't seem to get all three axis calibrated together.

     

    In FSUIPC the values show -16384 to 16384 but upon moving the aileron or elevator to their extremes there is very little value change. For example starting at -16384 I move the elevator the complete travel of it's axis

    and the values will change to 16384 (essentially nothing in between).

     

    I'm not sure if I'm supposed to calibrate one axis at time, save and apply or do all three at the same time and save and apply?

     

    Would you mind letting me know what the 512 values are in the centre boxes please? I have read the manual but can't seem to get my head around it.

     

    Thank you for your time.

     

    Regards

     

    Alan W

  5. Hello Pete

     

    Hope you don't mind-one more question-differential brakes/brakes this time-when depressing the toe brakes the aircraft has a tendency to veer one way or the other, I understand that more pressure can be applied

    by the left or right leg but I find myself constantly compensating the 'veer' off by manipulating the steering tiller.

    Have you any 'tips or tricks' that may alleviate this?

     

    Thank you

     

    Regards

     

    Alan W

  6. Hello again Pete

    Forgot to ask and forgive me if I'm being ignorant but you mention sensitivities, I've read the manual-correct me if I'm wrong-it mentions

    setting the sensitivities in FS, I tried this but each time I go back to check they are never set as I left them.

    Does the slope option in FSUIPC act as the sensitivity here? Might sound a silly question but if I don't ask I won't know.

    Regards

    Alan

  7. Hello all

    Can someone enlighten me please?

    I'm in the most happy with the calibration of my home made control column/yoke but have one question.

    The dead zone on the elevator differs from when I take off to approach.

    Example: At VR I have to pull back the column quite some distance before lift off yet on approach I am finding there is virtually no dead zone so it is difficult

    to control the descent smoothly.

    Any ideas/suggestions welcome.

    Thank you

    Alan W

  8. Hello Pete

     

    Well after your lesson in word definition and delta values I now know fully what you mean and after a few tweaks I'm happy with the results.

     

    I do however have one more question for you.

     

    On approach, just after glideslope capture, A/P disconnected, descending nicely, a short time after following the F/D cue the aircraft nose dives.

     

    Is this anything to do with calibration?

     

    Thank you

     

    Regards

     

    Alan W

  9. Hello Pete

     

    Just spending some time calibrating etc and the values are 'jittering' in the axis assignment and joystick calibration window. I have checked FS own assignment-I have nothing assigned anywhere-all the assignments are deleted. In fact I've looked everywhere I can for a clue but can't find anything.

     

    Do you have any other suggestions as to what may be causing this?

     

    Thank you

     

    Regards

     

    Alan W

  10. Hello Pete

    This might not be the right place for this topic but hopefully you'll have the answer!

     

    After calibrating all the controls I was testing in FS to make sure all worked ok and noticed in flight with the A/P engaged, moving the rudder pedals

    caused the rudder to move. Am I right in thinking this shouldn't happen whilst in A/P mode?

     

    Thank you

     

    Regards

     

    Alan W

  11. Hello Pete

    Not really a major issue but I find myself fighting with the controls on approach and landing after A/P disconnection

    and was simply wondering if you have any tips for achieving smoothness with regard to the rudder,brakes and aileron.

    Is there anthing else in FSUIPC other than the usual calibration window that I could adjust/change to improve how these controls react.

    I have read about different values in axis assignments etc but don't fully understand how it all works.

    Anyway thanks in advance for any suggestions, much appreciated

    Alan W

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.