CBB
-
Posts
90 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by CBB
-
-
Hi Pete, well I tried it again but still no detection (see my last post on prosim forum), it seems to me that prosim is not detecting the switch for some reason, which is odd as other users have this working
-
Just received a reponse on the prosim forum, it seems the Gate should be set to an 8 bit unsigned, rather than 32 that I had. I will try that tomorow
-
Thanks, Pete, yes I have posted this on the prosim forum. I got this idea from another Prosim post in the following link, where he managed to do the same thing, albeit with the R/T switch and not the I/C switch but it is the same principle - see Step 3
Charles
-
P3D 4.5, Prosim 2.30, CPflight h/w connected via the MCP, FSUIPC 5
I am trying to get FSUIPC to recognize as a button the movement of the I/C switch on my CPflight ASP (Audio Sound panel)
But I cannot get FSUIPC (version 5) to recognize a virtual button. I went into prosim/configuration/Gates and selected the I/C on the captain side to FSUIPC 32 bit U with the offset 0x3340.0 (see attached pic) but when I go into FSUIPC buttons tab (with everything running including P3D, prosim system, prosim MCP), it does not sense the moving of the I/C switch as a button.
I tried other offsets (3344.0, 3352.0) but still no joy. I checked that the I/C switch hardware is working, it is recognized by the CPflight hardware test all ok.
I would be very grateful if you can shed light on this!
Charles
-
Great to have you back, Pete! Now seems to be resolved after I installed 4948c. But I don't know if it was that or the fact that this time, before installing 4948 (from 4939v) I cleared out the old registry entries for FSX (which I do not have) which were causing an issue on install of FSUIPC as detailed in the prosim forum. I suspect these were messing something up on install. Also, someone else on the prosim forum reported that the wxr radar worked for him after uninstalling the p3d fsx migration tool so maybe having FSX "left behind" is the culprit
Anyway, thanks again
Best
Charles
-
Hi Pete, when you return from your hols, pls have a look at this, confirmed there is a problem with 4,948 of fsuipc causing radar.bin to be null. Version 4,939n of fsuipc is confirmed to be last version that worked with prosim radar. Here is link to prosim threads
http://prosim-ar.com/forum/viewtopic.php?f=13&t=8971&p=65769#p65769
-
Hi, I am using P3D 2.5, Prosim 1.46b5, ASN and wxr radar has been working fine for months. Just upgraded fsuipc from 4.939v to 4.948 and no longer have any wxr visuals on my ND, even in heavy cb area. I checked the fsuipc ini and I still have the entry ASNwxRadarPath=c:\ProSim737\radar.bin and my latest prosim log has:
11/14/2015 5:50:26 PM * System:Active Sky Next integration enabled
11/14/2015 5:50:26 PM * System:Active Sky Next radar.bin loaded successfully, using prerendered ASN cloud data
Anyone else had this problem with fsuipc 4.948?
Looking in my simconnect log for today (14th nov) there is a simconnect error message, but I think this is something else as I had the same message yesterday (13th nov) and previously, when the wxr radar was working fine.FSUIPC had an install error because it was looking for an old path to a dummy fsx folder which I no longer have, but the install to P3d seems ok
The logs are all attached here on the prosim forum (I couldn't attached them here)
http://prosim-ar.com/forum/viewtopic.php?f=13&t=8971&p=65571#p65571
Best
Charles -
The fps in P3D is now 13 but if i switch windows to FA it is looking much better (jumps from 13 to my low minimum of 25). But if I open FA on top of P3D (ie both visible same time) FA sits quietly on 13 and no other dial has a reading.
So which way are we meant to view FA?
-
I have just installed fiber accelerator with a new install of P3D 2.5, I used to use it with FSX.
I have an i7 2600K 8BM processor and 2 Radeon HD6970 2GB on a 4 TV view (the main view is stretched on the front 2 TVs and there is one undocked view on each TV on either side). With FSX I would get about 15-20 fps on a detailed airport and then up to 100 away from it
I have P3d on low settings for graphics and terrain and with fiber accelerator P3D is saying 10fps although within the FA program it says 16-26. Why is this different?
2nd question is are there some good tweaks for P3D 2.5 like there were for FSX, I heard that the recommendation for 2.5 was not to tweak?
Best
Charles
-
I have just moved from FSX to P3D, can I transfer my licence for FSX Fiber to a P3D one or do I have to buy again? I will not be using FSX anymore.
Order Number: 2702
Detailed Invoice: http://store.thefsps.com/account_history_info.php?order_id=2702
Date Ordered: Friday 01 August, 2014Best
Charles
-
Hi
Just moving from FSX to P3D. I am confused re these 3 products: do I need all 3 or just one for optimal performance?
Best
Charles
-
OK, thanks for all the info, I will report back with progress.
Btw, it would be good to be able to see the fiber gauge when in flight....as I have FSX in full screen mode and Fiber on my FSX PC which displays the view outside the cockpit, it is impossible to view the Fiber gauge during flight. Is there a plan to address this, for example to be able to run Fiber on a networked pc, or at least to be able to view the gauges on a network pc even if fiber is still run on the fsx pc?
Best
Charles
-
Thanks, though note I have never had an out-of-memory until now and I have used FSX intensively for around 6 years. A fairly recent add-on is Unlimited Traffic 2 which I have run for around 2 months with no problems, although not intensively as I fly mostly on vatsim. Maybe it is this. I have their display traffic option on 20%
Adjust blurries for speed was and is activated
I am unclear on CPU Terrain, the manual says it should be as low as possible, but this is the red zone on the dial, the higher the reading the more green the dial. Should it be in the low region or high? Latest test:
If I set the low target at 23, cpu terrain goes to 80-100, efficiency 90-100%, memory 2651, video override 2048, frames still jump around 18-25, but spike to 45 a lot, the experience is very good
If I set the low target at 24, cpu terrain goes to 2-6, efficiency 1-7%, memory 2654, video override 96, frames still jump around 18-25, but spike to 45 a lot, the experience is very good
If I desacticate fiber all the dials zero except frames which are same as above and memory, the experience is good but occasional stutters
-
I have been running just Fiber Accelerator around 7 times with no problem (v 1.2 and 1.3.1).
My setup has 2 Radeon 6970 2Gb graphic cards, one card is connected via DVi to Matrox Dualhead2 with 2 TVs which combined are on 3840 x 1080 x 60Hz at 32 bit and also connected to the left side TV via HDMI 1080p 60 HZ. The 2nd card is connected to the right side TV via HDMI 1080p 60 HZ. Within FSX I have the front view (dualhead2go) set at 3840 x 1080 x 32 and each of the side views at 1920 x 1080 x 32. My processor is the core i7 2600K 8MB 1155
I recently purchased FSX Booster too and just ran my 1st flight with it with what I think seem like mid settings for optimal performance and no stability issues. The memory clock of each card is stated at 1375MHz Memory Clock (5.5 Gbps GDDR5), so I put 1375 in FSX Booster. In FSX Booster I have pixels at 1024, OPtimal boost, buffer pools enabled, 4 pixels, trees etc on yes, frames per sec 60, 3.5 level of detail radius, use 1st cpu for add-ons, speed up terrain loading unchecked, Directx unchecked, FSX process priority normal, adjust blurries for speed, everything else checked
I had Fiber set at 20 for Low (up to 1000 AGL) and 35 for medium (to 5000 AGL) and FSX frames set to 60
At the airport on startup Fiber showed what seemed good results, except maybe the CPU Terrain is what is causing the issue, as I read in the manual that this needs to be as low as possible??:
- CPU terrain 100%
- Efficiency 90-100%
- Video overide 2048 (max)
- Frames are jumping a lot but are around 16-24, sometimes jumoing to 40
All was ok on the flight except 2 times at around 10000 ft I got a couple of jerky frames, but all continued ok until taxiing at my destination aitport when FSX froze with a message of "Out of Memory, restart FSX and set different graphic settings"
If I set the low target at 25, cpu terrain goes to 0, efficiency 1-2%, video override 96, frames still jump around 18-40
If I set the low target at 23, cpu terrain goes to 35, efficiency 40-50%, video override 2048, frames still jump around 18-40
What is likely to have caused the out of memory issue?
Is it the CPU Terrain being at 100%?
Should I go for the Low setting of 23?
Do I leave FSX Booster open alongside Fiber during flight or should Booster be closed?
Thanks
-
Hi, I have both, that is Ok I understand, FSX Booster being the initial optimal setup (static) and Fiber Accelerator being dynamic, changing settings as you fly. Pls confirm ok to use both like this.
Just one other question re FSX Booster, I have 2 Radeon HD6970 2GB DDR5 graphic cards, the spec for each one says 1.375 Ghz (5.5 Ghz effective). I use one card for the front view (two 42 inch TVs 1920 x 1080 60 mhz connected via Matrox Dualhead2Go) and the other card for the left and side views (same TVs).
1/ What should I put in the box for the Ghz speed of the cards?
2/ Is there anything else special I should put in FSX Booster specification, given my view setup?
I can get over 100 fps when airborne but have the same issue around airports (around 12-20 without FSPS add-ons), using the Intel I7
Best
Charles
-
OK, apologies, here is the log and the ini used to produce it:
********* WideClient Log [version 6.999n] Class=FS98MAIN *********Date (dmy): 07/07/14, Time 09:47:14.445: Client name is CHARLES-4Monitoring 330F,17250 KeyHook added: 259=0,0,,250 KeyHook added: 260=0,0,,250 LUA: "C:\Wideclient\Initial.LUA": not found265 Attempting to connect now281 Trying TCP/IP host "Newserver" port 8002 ...281 ... Okay, IP Address = 192.168.0.115281 Connection made okay!515 Using "C:\Wideclient\GFDEV.DLL", version 2.2.1.031559 Monitored LAN data received:Offset 0330F:01 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................00 .31559 c:\fast\fast31559 c:\fast\fast\fastflightsim.exe31559 Checked KeySend[0]=331856 New Client Application: "FASTFlightsim" (Id=3272)43056 Monitored LAN data received:Offset 0330F:02 03 03 00 00 00 00 00 00 00 00 00 00 00 00 00 ................00 .43056 Program 18, Window = 9022243056 Checked KeySend[1]=345209 Monitored LAN data received:Offset 0330F:03 03 03 03 00 00 00 00 00 00 00 00 00 00 00 00 ................00 .45209 Program 18, Window = 9022245209 Checked KeySend[2]=360404 ****** End of session performance summary ******60404 Total time connected = 60 seconds60404 Reception maximum: 22 frames/sec, 668 bytes/sec60404 Reception average whilst connected: 14 frames/sec, 432 bytes/sec60404 Transmission maximum: 0 frames/sec, 177 bytes/sec60404 Transmission average whilst connected: 0 frames/sec, 25 bytes/sec60404 Max receive buffer = 638, Max send depth = 1, Send frames lost = 060404 **************** Individual client application activity ****************60404 Client 3272 requests: 15 (Ave 0/sec), Data: 322 bytes (5/sec), Average 21 bytes/Process60404 ********* Log file closed (Buffers: MaxUsed 2, Alloc 931 Freed 931 Refused 0) *********any my ini:[user]Log=KeysendMonitor=330F,17KeySend3=RunKey1RunKey1=c:\fast\fast\fastflightsim.exeUseSendInput=Yes -
I updated to 6999n and deleted the assignment in FSUIPC on release of the button, so the assignment in FSUIPC is just Kesend and parameter=3.
In the wideclient.ini I have the following, I ran the test with Log=Keys but no extra log was produced, so I ran again with Log=Keysend and got the following 2 logs
Result was the same, it opens the program the first time I do it, but not the 2nd and after. I have to close and re-open wideclient for it to work
Wideclient ini:
[user]Log=Errors+Log=KeysendKeySend3=RunKey1RunKey1=c:\fast\fast\fastflightsim.exeUseSendInput=YesLogs:********* WideClient Log [version 6.999n] Class=FS98MAIN *********Date (dmy): 08/07/14, Time 11:02:29.306: Client name is CHARLES-4234 LUA: "C:\Wideclient\Initial.LUA": not found250 Attempting to connect now266 Trying TCP/IP host "Newserver" port 8002 ...266 ... Okay, IP Address = 192.168.0.115266 Connection made okay!500 Using "C:\Wideclient\GFDEV.DLL", version 2.2.1.015803 c:\fast\fast15803 c:\fast\fast\fastflightsim.exe16037 New Client Application: "FASTFlightsim" (Id=1764)********* WideClient Log [version 6.999n] Class=FS98MAIN *********Date (dmy): 07/07/14, Time 10:48:09.369: Client name is CHARLES-0265 Attempting to connect now265 LUA: "\\CHARLES-4\Wideclient\Initial.LUA": not found2824 Trying TCP/IP host "Newserver" port 8002 ...2824 Error on client gethostbyname() [Error=11004] Valid name, no data record of requested type35194 ****** End of session performance summary ******35194 Total time connected = 0 seconds35194 Reception maximum: 0 frames/sec, 0 bytes/sec35210 Transmission maximum: 0 frames/sec, 0 bytes/sec35210 Max receive buffer = 0, Max send depth = 0, Send frames lost = 035210 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) ********* -
The button is a goflight button, I have checked it is working fine on the buttons page of FSUIPC. I have it programmed as Kesend3 (key press not to be held) and then for release Keysend4, which I have not yet assigned....ah, ha maybe that is the issue? (I will delete this keysend4 and see)
I put in the Log=Keysend when I did the last test....I thought the log files above were the result or is the log filed somewhere else?
What I found odd was the line 63165, why it only picked part of the address first or is this normal?
63165 c:\fast\fast63165 c:\fast\fast\fastflightsim.exe -
Thanks, I just tried again and same problem. My log files look like this:
********* WideClient Log [version 6.999b] Class=FS98MAIN *********Date (dmy): 07/07/14, Time 22:04:13.191: Client name is CHARLES-4234 LUA: "C:\Wideclient\Initial.LUA": not found250 Attempting to connect now250 Trying TCP/IP host "Newserver" port 8002 ...250 ... Okay, IP Address = 192.168.0.11521294 Error on client pre-Connection Select() [Error=10060] Connection timed out21294 Ready to try connection again22324 Attempting to connect now53384 Connection made okay!53571 Using "C:\Wideclient\GFDEV.DLL", version 2.2.1.063165 c:\fast\fast63165 c:\fast\fast\fastflightsim.exe63804 New Client Application: "FASTFlightsim" (Id=2112)********* WideClient Log [version 6.999b] Class=FS98MAIN *********Date (dmy): 07/07/14, Time 22:02:46.664: Client name is CHARLES-4281 LUA: "C:\Wideclient\Initial.LUA": not found281 Attempting to connect now1045 Trying TCP/IP host "Newserver" port 8002 ...1045 ... Okay, IP Address = 192.168.0.11522074 Error on client pre-Connection Select() [Error=10060] Connection timed out22074 Ready to try connection again23104 Attempting to connect now66613 ****** End of session performance summary ******66613 Total time connected = 0 seconds66613 Reception maximum: 0 frames/sec, 0 bytes/sec66613 Transmission maximum: 0 frames/sec, 0 bytes/sec66613 Max receive buffer = 0, Max send depth = 0, Send frames lost = 066613 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) ********* -
Hi Pete
I have the following in my wideclient .ini:
[user]Log=Errors+KeySend3=RunKey1RunKey1=c:\fast\fast\fastflightsim.exeand on my FSX PC I assigned Keysend 3 to a button.It works fine after I first run wideclient and press the button on the FSX PC, the program loads fine.Then I manually close the program and try the button again, but nothing, it won't load the program again, only if I close and retart wideclient.I also tried pinning this program on the windows taskbar, from where I can activate it with the windows start button, ie it is the 2nd program on the taskbar so Winkey+2 will open it. I tried putting in the wideclient ini the following but nothing happened:KeySend3=50,40 (I understand 40 is the winkey)BestCharles -
Hi Achilles, do you have the files now that you can send?
-
Hi Achilles, did you see the ticket? No 10587
Best
Charles
-
Hi Achilles
Any chance of getting this done now? If not, let me know when you can
Best
Charles
-
Hi Achilles, I really need to sort out the fire module urgently on Monday (11th) as I have 2 737 pilots coming to check out my sim on Tues and all is working except this, I can't get the basics working:
- The bottles never put out a fire
- The reset button in the FSPS software does not reset the lights on the fire module
- The fire button on the MIP does not cut out the bell
I am using PM with latest FSPS sw and PM Sys v 202 with the 737 lgc file you sent me
I am staying with the sim all day Tues to resolve this with you
Pls help!!
Best
Charles
Application errors
in FSUIPC7 MSFS
Posted
Hi John, you kindly passed me the 7.3.17B beta to solve the WASM not initiating
I wonder if this is caused simply when I close down MSFS
Thx, I'll try this beta