-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Tyrion
-
-
Alright, now I feel stupid. ;)
Luckily, I was smart enough to make a backup of my 'working' fsuipc.ini file.
I tried the JoyIDs utility before, read the FAQ post...
However, before, I swapped id's just a couple of blank spaces below (which probably had something in them, although not showing, my not connected controllers probably).
This time, I just swapped with the very last id, got a confirmation message (hadn't seen that before!), and now it works...Still not sure why it shows 2 X-55 sticks. I only have and have ever had a single one. Not too worried about that though, as long as everything works.
Sorry to have bothered you with this Pete. Thought I tried everything. Clearly haven't tried well enough.
Thank you very, very much...
Lars
-
Hello,
I've recently updated my Windows 7 Ultimate installation to Windows 10 Pro (using the upgrade functionality).
Since then, I have one major issue with my Saitek X-55 throttle and FSUIPC. The problem is that FSUIPC does not detect axis and button inputs from the throttle unit. This in both FSX and P3D. If I start the sim, open FSUIPC, and go the axis calibration tab, nothing happens when I move one of the axis. Same thing for buttons, on the respective tab.
The X-55 stick works fine though, it's just the throttle. Similarly, the throttle works perfectly if I don't use FSUIPC. It's detected in Windows, the calibration tool works, and it also works if I assign axis through FSX or P3D. As I said, the problem only seems to happen with FSUIPC.I've tried:
1) reinstalling latest saitek drivers
2) completely uninstalling the X-55, restarting, then reinstalling, restarting again.
3) deleting the [JoyNames] section of the fsuipc.ini file
3) deleting fsuipc.ini file altogether
So far, no luck.
One thing I did notice that struck me as weird, (although I'm not sure) is that fsuipc.ini shows 2 entries for the X-55 rhino stick (the unit that works) and only one for the throttle (the one that doesn't). No idea why it shows 2 entries, and if it should or not.(I also tried updating fsuipc to v4.951 after copying the below files. No difference)
My usual fsuipc.ini file, containing the options and edits I used successfully before moving to Windows 10:
Quote[General]
UpdatedByVersion=4949h
History=ZNT39RM9SUUYYPNRKHBWV
InitDelayDevicesToo=No
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
AssignJoystickIDs=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-4
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Yes
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=No
OOMcheck=Yes
OOMcheckInterval=10
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
Console=No
AutoTuneADF=Yes
FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.2.3.2
SimConnectUsed=3.2.0.0[MacroFiles]
1=PMDG 737NGX[JoyNames]
AutoAssignLetters=Yes
A=Saitek Pro Flight Combat Rudder Pedals
B=Saitek Pro Flight X-55 Rhino Stick
C=Saitek Pro Flight X-55 Rhino Throttle
D=Saitek Pro Flight Cessna Yoke
E=Logitech Extreme 3D
0=Saitek Pro Flight Combat Rudder Pedals
0.GUID={7785B0D0-F2DD-11E1-8007-444553540000}
1=Saitek Pro Flight X-55 Rhino Stick
1.GUID={63FB62E0-CA3A-11E3-8002-444553540000}
2=Saitek Pro Flight X-55 Rhino Stick
2.GUID={63FB62E0-CA3A-11E3-8001-444553540000}
3=Saitek Pro Flight X-55 Rhino Throttle
3.GUID={63FB62E0-CA3A-11E3-8003-444553540000}
F=Saitek Pro Flight X-55 Rhino Stick[Axes]
PollInterval=10
RangeRepeatRate=10
5=DZ,256,F,65765,0,0,0
6=DU,256,F,66291,0,0,0
7=DV,256,F,66292,0,0,0
0=CX,256,F,66420,0,0,0
1=CY,256,F,66423,0,0,0
2=CZ,256,F,66291,0,0,0,*-1
3=CR,256,F,66382,0,0,0,*-1
4=CU,256,F,66292,0,0,0[Buttons]
PollInterval=25
ButtonRepeat=20,10[AutoSave]
Next=3
Interval=60
Files=5
SaveOnGround=No
AutoSaveEnabled=No
AlsoManage1=PMDG\PMDG 737 NGX\PanelState\*.fxml.0.rte
AlsoManage2=PMDG\PMDG 737 NGX\PanelState\*.fxml.fmc
AlsoManage3=PMDG\PMDG 737 NGX\PanelState\*.fxml.sav
AlsoManage4=D:\Users\Lars\Documents\Prepar3D v3 Files\*.asc
AlsoManage5=D:\Users\Lars\Documents\Prepar3D v3 Files\*.a2a
AlsoManage6=D:\Users\Lars\Documents\Prepar3D v3 Files\*.mj1
AlsoManage7=D:\Users\Lars\Documents\Prepar3D v3 Files\*.mj2
1=Mon 203114
2=Tue 234946
3=Mon 202510
4=Mon 202610
5=Mon 202709[GPSout]
GPSoutEnabled=No
Port=COM1
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=[GPSout2]
GPSoutEnabled=No
Port=<none set>
Speed=4800
Interval=2000
PosTo6Decimal=No
SimModeIndicator=No
Sentences=[WideServer]
WideFSenabled=Yes[Sounds]
Path=D:\Perpar3Dv3\Sound\
Device1=Primary Sound Driver
Device2=Speakers (2- Realtek High Definition Audio)
Device3=Realtek Digital Output (2- Realtek High Definition Audio)
Device4=Realtek Digital Output(Optical) (2- Realtek High Definition Audio)
Device5=PHL 244E5-C (NVIDIA High Definition Audio)[JoystickCalibration]
AllowSuppressForPFCquad=Yes
ExcludeThrottleSet=Yes
ExcludeMixtureSet=Yes
ExcludePropPitchSet=Yes
SepRevsJetsOnly=No
ApplyHeloTrim=No
UseAxisControlsForNRZ=No
MapThr12to34=Yes
MapThr12to123=Yes
FlapsSetControl=0
FlapDetents=No
ReverserControl=66292
Reverser1Control=66422
Reverser2Control=66425
Reverser3Control=66428
Reverser4Control=66431
MaxThrottleForReverser=256
AileronTrimControl=66731
RudderTrimControl=66732
CowlFlaps1Control=66162
CowlFlaps2Control=66163
CowlFlaps3Control=66164
CowlFlaps4Control=66165
SteeringTillerControl=0
MaxSteerSpeed=60
MapThr1to234=Yes
Throttle=-16380,16380[Profile.Dodosim 206]
1=Dodosim 206 FSX GDDSM H
2=Dodosim 206 FSX GDODO F
3=Dodosim 206 FSX GDODO H
4=Dodosim 206 FSX GDDSM L[Axes.Dodosim 206]
RangeRepeatRate=10
0=CX,256,F,65765,0,0,0
1=CY,256,F,66423,0,0,0
2=CZ,256,F,66291,0,0,0,*-1
3=CR,256,F,66382,0,0,0,*-1
4=CU,256,F,66292,0,0,0[Window.LUA display]
Docked=7354, 2823, 3545, 775[LuaFiles]
1=pa28
2=testfsi
3=Aerosoft_F14AB[Window.VAFS Message:]
Docked=262, 2823, 3545, 1179[Profile.Twin Engine Jet (No Props)]
1=Twin Engine Jet (No Props)[Axes.Twin Engine Jet (No Props)]
RangeRepeatRate=10
0=DZ,256,F,66420,0,0,0
1=DU,256,F,66423,0,0,0
2=DV,256
3=DV,B,-16384,-9288,65778,0
4=DV,B,8256,16383,65774,0[Profile.PMDG 737 NGX]
1=Boeing 737-800NGX Andras Meridian RTW Winglets (McPhat)
2=PMDG 737-800NGX PMDG House
3=PMDG 737-900NGX PMDG House
4=PMDG P-8A Poseidon
5=PMDG 737-800NGX Scandinavian[Axes.PMDG 737 NGX]
RangeRepeatRate=10
0=DZ,256,F,66420,0,0,0
1=DU,256,F,66423,0,0,0
2=DV,256
3=DV,B,-16384,-9288,M1:1,0
4=DV,B,8256,16383,M1:2,0
5=DV,B,-16384,-9030,M1:3,0
6=DV,B,8385,16383,M1:4,0The new autogenerated fsuipc.ini file:
Quote[General]
Console=No
UpdatedByVersion=4949h
History=TX0WLZUGL2SE9QB644XIX
InitDelayDevicesToo=No
NewInterceptTextMenu=No
UseSystemTime=No
UseMidMouseBtn=Yes
MouseWheelMove=No
MouseWheelTrim=No
MouseWheelTrimSpeed=1
JoystickTimeout=20
PollGFTQ6=Yes
BlankDisplays=No
FixControlAccel=No
FixMachSpeedBug=No
DeleteVehiclesForAES=Yes
AutoScanDevices=Yes
AssignJoystickIDs=Yes
VisibilityOptions=No
OneCloudLayer=No
CloudTurbulence=No
CloudIcing=No
GenerateCirrus=No
SuppressCloudTurbulence=No
MaxIce=-4
MinIce=-1
UpperWindGusts=No
SuppressWindTurbulence=No
SuppressWindVariance=No
WindTurbulence=No
TurbulenceRate=1.0,5.0
TurbulenceDivisor=20,20,40,40
SuppressAllGusts=No
MaxSurfaceWind=0
WindLimitLevel=200
WindDiscardLevel=400
WindAjustAltitude=No
WindAjustAltitudeBy=2000
SmoothBySimTime=No
WindSmoothing=No
WindSmoothness=2
WindSmoothAirborneOnly=Yes
PressureSmoothness=0
TemperatureSmoothness=0
DisconnTrimForAP=No
ZeroElevForAPAlt=No
ThrottleSyncAll=No
WhiteMessages=No
ShowPMcontrols=No
SpoilerIncrement=512
MagicBattery=No
RudderSpikeRemoval=No
ElevatorSpikeRemoval=No
AileronSpikeRemoval=No
ReversedElevatorTrim=No
ClockSync=No
ClockSyncMins=5
ClearWeatherDynamics=No
OwnWeatherChanges=No
TimeForSelect=4
LoadFlightMenu=No
LoadPlanMenu=No
PauseAfterCrash=No
BrakeReleaseThreshold=75
SaveDataWithFlights=No
ZapSound=firework
ShortAircraftNameOk=Substring
UseProfiles=Yes
EnableMouseLook=No
DelayedMouseLookZoom=No
AxesWrongRange=No
TCASid=Flight
TCASrange=40
AxisCalibration=No
DirectAxesToCalibs=No
ShowMultilineWindow=Yes
SuppressSingleline=No
SuppressMultilineFS=No
AxisIntercepts=No
DontResetAxes=No
InitDelay=0
GetNearestAirports=No
OOMcheck=Yes
OOMcheckInterval=10
WeatherReadFactor=2
WeatherRewriteSeconds=1
CustomWeatherModify=No
SimConnectStallTime=1
InitialStallTime=10
NormalStallTime=1
LuaRerunDelay=66
FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.2.3.2
SimConnectUsed=3.2.0.0
[JoyNames]
AutoAssignLetters=No
0=Saitek Pro Flight Combat Rudder Pedals
0.GUID={7785B0D0-F2DD-11E1-8007-444553540000}
1=Saitek Pro Flight X-55 Rhino Stick
1.GUID={63FB62E0-CA3A-11E3-8002-444553540000}
2=Saitek Pro Flight X-55 Rhino Stick
2.GUID={63FB62E0-CA3A-11E3-8001-444553540000}
3=Saitek Pro Flight X-55 Rhino Throttle
3.GUID={63FB62E0-CA3A-11E3-8003-444553540000}
[Axes]
PollInterval=10
RangeRepeatRate=10
[Buttons]
PollInterval=25
ButtonRepeat=20,10
[MacroFiles]
1=PMDG 737NGX
[LuaFiles]
1=Aerosoft_F14AB
2=pa28
3=testfsi
[AutoSave]
Next=1
Interval=60
Files=10
SaveOnGround=No
AutoSaveEnabled=No
[GPSout]
GPSoutEnabled=No
[GPSout2]
GPSoutEnabled=No
[WideServer]
WideFSenabled=Yes
[Sounds]
Path=D:\Perpar3Dv3\Sound\
Device1=Primary Sound Driver
Device2=Speakers (Realtek High Definition Audio)
Device3=Realtek Digital Output (Realtek High Definition Audio)
Device4=PHL 244E5-C (NVIDIA High Definition Audio)
Device5=Speakers (Logitech G330 Headset)
Device6=Realtek Digital Output(Optical) (Realtek High Definition Audio)and the FSUIPC.log file from the last try:
Quote********* FSUIPC4, Version 4.949h by Pete Dowson *********
Prepar3D.exe version = 3.2.3.16769
Reading options from "D:\Perpar3Dv3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0
Module base=52C40000
User Name="Lars Domen"
User Addr= //removed for privacy reasons (public forum)
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
31 System time = 17/05/2016 15:06:27
31 FLT path = "D:\Users\Lars\Documents\Prepar3D v3 Files\"
31 ------ Module Version Check ------
31 acontain.dll: 3.2.3.16769
31 api.dll: 3.2.3.16769
31 controls.dll: 3.2.3.16769
31 fs-traffic.dll: 3.2.3.16769
31 G3D.dll: 3.2.3.16769
31 language.dll: 3.2.3.16769
31 sim1.dll: 3.2.3.16769
31 visualfx.dll: 3.2.3.16769
31 weather.dll: 3.2.3.16769
31 window.dll: 3.2.3.16769
31 ----------------------------------
31 Trying D:\Perpar3Dv3\Modules\SimConnectP3D2.dll
47 Found it: trying to connect
47 FS path = "D:\Perpar3Dv3\"
453 ---------------------- Joystick Device Scan -----------------------
453 Product= Saitek Pro Flight Combat Rudder Pedals
453 Manufacturer= Saitek
453 Vendor=06A3, Product=0764 (Version 2.1)
453 Serial Number= Saitek
453 Product= Saitek Pro Flight X-55 Rhino Stick
453 Manufacturer= Madcatz
453 Vendor=0738, Product=2215 (Version 0.86)
453 Serial Number= G0000187
453 Product= Saitek Pro Flight X-55 Rhino Throttle
453 Manufacturer= Madcatz
453 Vendor=0738, Product=A215 (Version 0.119)
453 Serial Number= G0000223
453 -------------------------------------------------------------------
719 LogOptions=00000000 00000001
719 -------------------------------------------------------------------
719 ------ Setting the hooks and direct calls into the simulator ------
719 --- CONTROLS timer memory location obtained ok
719 --- SIM1 Frictions access gained
719 --- FS Controls Table located ok
719 --- Installed Mouse Macro hooks ok.
719 --- Wind smoothing fix is installed
719 --- All links okay (except older global weather setting method)
719 -------------------------------------------------------------------
719 SimConnect_Open succeeded: waiting to check version okay
719 Trying to use SimConnect Prepar3D
13781 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.2.3.2 (SimConnect: 3.2.0.0)
13781 Initialising SimConnect data requests now
13781 FSUIPC Menu entry added
13812 D:\Users\Lars\Documents\Prepar3D v3 Files\EBOS.fxml
13812 D:\Perpar3Dv3\SimObjects\Airplanes\Maule_M7_260C\Maule_M7_260C.air
75187 System time = 17/05/2016 15:07:42, Simulator time = 15:06:40 (13:06Z)
75375 Aircraft="Maule M7 260C paint3"
130109 Starting everything now ...
130203 ASN active function link set
130203 Ready for ASN WX radar
131297 Advanced Weather Interface EnabledAny feedback would be very welcome. Would very much like to get this working as it should...
Thank you very much,
Lars
Joystick not detected by FSUIPC
in FSUIPC Support Pete Dowson Modules
Posted
Hey Pete,
Both JoyID and Windows only see the one stick...
The 'ghost' stick is not causing issues at the moment, so I'm just going to leave it be, instead of risking causing further problems.
Thanks again for your help!
Lars