jgdl

Hello Pete, How have you been? My CH Yoke broke down. one of the plastic pods where the spring attaches broke. I tried to use epoxy but it did not work. I ordered a new Saitek pro flight, and while i was waiting for it to arrive, I decided to use a logitech extreme 3d pro in the mean time. I could not get the views to work. All planes start up in the look forward up position. I go back to views options. I select cockpit and the look forward option, and then I will retun to the normal view. looking forward and seeing the panel. after two seconds it switches back to the forward up position by itself. I thought that it was probably a broken joystick. Today I received the new controller. I was able to assign the axis and calibrate them correctly in FSUIPC,but it still does the same thing with the views/ I am using FSUIPC, and have the joystick disabled in FS9. I have tried enabling the joystick in FS9 but it does not work. At this stage believe that my FSUIPC files were probably corrupted when I plugged in the old logitech extreme joystick I remember once that my FSUIPC was corrupted, and you told me to delete some files and restart FS9 and those files were re-generated. Which were those files? to see if that solves the issue. Thanks and regards Juan G Ducaud

Hi Pete, I did but since I did not have issues with my joystick before, the the two middle calibration boxes for the aileron were exactly the same, leaving no null zone, yesterday I re-calibrated creating a null zone, and now it works perfectly. Regards, Juan It's a major part of the essential steps in calibrating any axis, the numbered ones you should have followed in the Joystick Calibration section of the User Guide. If you've never noticed this you've really not calibrated anything properly. Regards Pete

You are still going to go to back to the upper menus,to disconnect them, or you will taxi dragging the generator and air start down the tarmac (lol). Juan Hi John, There are no key assignments available in the iFly 737 for those functions. The SDK is now released so if you are into programming you might have a look there. The least complicated method to achieve what you want is to save a flight with ground air and electrical connected then use that as your iFly 737 start up flight. Best, Jim Harnes

Hi Pete, In regards to my issues with the Ifly Boeing 737;after many tests and hours of testing , they were able to figure out what was wrong. My throttles did not respond to any automatic input either from the FMC or the MCP, only the physical movement of the throttles. It turns out that it was the fact that I used a USB hub to connect my CH Yoke, pedals and throttle quadrant, to the PC. Once I plugged in the throttles directly to one of the computer's available USP port, the throttle issues were gone. Interesting is the fact that I never had an issue with my throttles connected to the USB Hub, but it works. One of the other issues that I still have is the autopilot and/or LNAV disconnects. I realized that the Ifly 737 is extremely sentitive to joystick input, and sometimes merely brushing the yoke could cause a disconnect. The problem is that is pretty hard to use the POV HAT to move through your views without disconnecting the autopilot. Is it possible to increase the null zone of the aileron axis in order to reduce the diconnects? Could you tell me how is it done, or point me to where in the manual I can find the process? Thanks and Regards, Juan Good. Happy flying! ;-) Regards Pete

Hola Felix, Creo que Pete no esta entendiendo la informacion que estas buscando. Si quieres me lo explicas en espanol y yo le pregunto a el. Saludos Juan Pete, I believe there is a language barrier here, I asked Felix to explain to me what he wants, so I can explain it to you later. Regards

No worries Pete, You have been more than helpful. This is the latest reply I got. Juan, The issue is 100% hardware related, unfortunately, I can't see what happening with your setup but my guess would be a conflict between FS and FSUIPC. and here is my reply: Steve, with all due respect, why do I have a conflict now between FSUIPC and FS, when I have been flying for thousands of hours using PMDG B744-400, PMDG B737, PMDG MD11, Level D 767, Flight 1 ATR-72-500, Wilco Embraer 145. and I have never have a conflict between them, I have never had a runaway plane as I do now. I was able to fix my DLL issues, and FS is back to normal. I have been using FSUIPC and WIDEFS for while now and I its the most stable and useful program I have, Since its a behind the scenes program people don't know how much it can do. No fancy graphics, or bells and whistles, but rock solid performance Thanks again Pete. Juan

Thanks for your reply Pete, here below attached is the reply that they gave me in relation to FSUIPC. In any event, I have saved on another disc a full previous installation of FS9, I went and I copied all of those dll's over into the modules and replaced the corrupted ones, but when I restarted I got the same error messages. Thanks for your reply Pete Juan Hi Juan, It looks like you have a corrupt download. What your seeing is not normal behaviour. Can I ask if you read this post http://ifly.flight1....s-after-reading We need a bit more information from you to be able to offer accurate help. If you downloaded with Google Chrome you will have issues. This product because there are so many models has 21 gauges and all it takes is for one of those to be corrupted. I am guessing you are using Vista or Windows 7 because you mentioned UAC and right clicking on the installer to run as Admin. Please make sure there is no other malware or nay kind of protection on. Another issue we get happend when the install is done in the 1st instance without the correct permissions UAC and Admin and the registered fsuipc gets corrupted and we see loads of issues. If you backup all your current FSUIPC files to a safe area reinstall FSUIPC and see how things work. If you stick with it we will get there. Information is King for us and thats why that posts asks for full system details and details of your gaming hardware.Cheers Steve Masson

Hello Telly, You can go to the World of AI, and they have all major airlines of the world, they also have an installer which makes it very easy to install all of their packages, The quality of the aircraft is excellent, and it is all free. Their site address is as follows: http://www.world-of-ai.com/index.php Regards Juan Thank you for your reply. I will learn about the "Ultimste Traffic 2". This information might be very useful for me. I wish to express my gratitude deeply for having offered me the valuable information. Regards.

Hello Pete how are you? I recently purchased and installed the IFly Boeing 737 for FS2004. I downloded and installed, and I was having several issues. After I contacted them they told me that it was probably due to the fact that I have downloaded the software using Goocle Chrome instead of Internet Explorer, and that I also installed as a user not as the administrator. I unisntalled it downloaded again and I was having different issues (VNAV mode not climbing over 10,000 ft). They told me that sometimes FSUIPC gets corrupted and that I needed to reinstall it. I created a folder in the desktop where I cut and pasted from the modules folder in FS the following files: FSUIPC Install.log FSUIPC.dll FSUIPC.ini FSUIPC.log Then I executed the following file "Install FSUIPC.exe" installing FSUIPC 3.98 Then I registered using my registration, I did the registration for both FSUIPC and WideFS, even though I had not uninstalled Wide FS. Then I installed Ifly Boeing 737 again. I rebooted the PC and then I try to enter FS2004 and I get the following message: Error FS9 Flight Simulator was unable to load some aircraft or software. You can continue using Flight Simulator but this aircraft or Sotware will be disabled File: CONTROLS.DLL, I pressed OK then I get a similar message , this time the missing File is : DEMO.DLL I pressed OK again and i got the message this time the missing File is : FACILITIES. DLL Kept on pressing OK and the rest of the files missing or corrupted are: FE.DLL, FLIGHT.DLL, INSTRUCTOR.DLL, MAIN.DLL, MULTIPLAYER.DLL, SYMMAP.DLL, WEATHER.FLL Then I got the following message: ERROR-FS9 The 'K:\FS9\MODULES\CONTROLS.DLL' file is missing or damaged Please reinstall Flight Simulator to restore or repair the file. Flight Simulator will now quit What could have caused this? and is there any way to fix, or restore this files without having to reinstall everything? Thanks for your help Juan G. Ducaud