jaoder

Hi Pete sorry I've been slow to get back to this been gone. What I am trying to do is assign the FSX commands: 2D Cockpit View (shortcut) & Virtual Cockpit (shortcut) which I assume is a view to buttons on my yoke through FSUIPC (I have the most recent version) at present I am using those commands through the settings/controls in FSX. I just wanted to see if these views are available throught FSUIPC, if not no big deal I'm just trying to get away from using the FSX commands as much as possible. I mostly fly the F1 Cessna Mustang and have most everything else that I require assigned through your program and a LUA file and it all works great. Thx John

I've been looking over the FSX command list in FSUIPC and couldn't find the Virtual Cockpit or 2D cockpit commands I wanted to assign them to my yoke with FSUIPC rather than FSX. Could some one tell me were to find those? Thanks

Thanks Pete that did the trick, I had tried the "Auto" before but didn't remove the ipcready.lua file. There are a couple of functions that don't work but the control may have changed with some of the updates to the plane since that was written. I used your Lvar logging file and got a list of all the Lvars so now I can have some fun learning how to write LUA scripts. Thanks again, John

I am trying to run the F1MustangSWCtl.lua file included with FSUIPC LUA Plug-ins on FSX and am having some issues getting it to work properly. I copied this file along with the ipcready.lua file to the modules folder as instructed, assigned the switches and buttons to the luaset F1MustangSwCt in FSUIPC profile setup for the A/C got everything working as desired. Shut down FSX then next time I brought the A/C up none of the switch assignments worked, I checked the settings in FSUIPC and they were all still there. So I experimented a little and changed some of the setting over to luatoggle F1MustangSwCl. and those assignments started working cycled FSX brought up the A/C those switches no longer worked. Went back to luaset got them working until I shut down FSX, I am not a programmer or that familiar with LUA (yet) but would like to use this file if possible. I have included my current FSUIPC.ini file. Over all I have found FSUIPC to be an excellent addon to FSX so I'm sure it something I'm missing. Thanks John [General] UpdatedByVersion=4749e History=M7081OI1WQE31OM524YJF MouseWheelTrim=No MouseWheelTrimSpeed=1 FixControlAccel=Yes FixMachSpeedBug=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=Yes GenerateCirrus=Yes SuppressCloudTurbulence=No MaxIce=3 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=Yes WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=Yes ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=Yes RudderSpikeRemoval=Yes ElevatorSpikeRemoval=Yes AileronSpikeRemoval=Yes ReversedElevatorTrim=No ClockSync=Yes ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=Yes TimeForSelect=4 LoadFlightMenu=Yes LoadPlanMenu=Yes PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=No UseProfiles=Yes TCASid=Flight TCASrange=50 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 Console=No JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No GetNearestAirports=No LuaRerunDelay=66 ForceWeatherKey=90,9 ThrottleSyncToggle=110,8 AllEngHotKey=8,8 NewLogKey=33,8 StopLogKey=34,8 EnableMouseLook=No AxesWrongRange=No InitDelay=0 FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=Yes c=Saitek Pro Flight Rudder Pedals A=Saitek Pro Flight Yoke B=Saitek Pro Flight Quadrant D=Saitek Pro Flight Quadrant 0=Saitek Pro Flight Rudder Pedals 0.GUID={97A07930-2E2C-11E0-8003-444553540000} 1=Saitek Pro Flight Yoke 1.GUID={8538E140-2EC4-11E0-8001-444553540000} 2=Saitek Pro Flight Quadrant 2.GUID={8538E140-2EC4-11E0-8002-444553540000} 3=Saitek Pro Flight Quadrant 3.GUID={5813DF50-18FF-11E1-8001-444553540000} [buttons] ButtonRepeat=20,10 4=RA,6,C66276,0 5=RA,7,C66277,0 6=PA,1,C65791,0 11=RA,14,C65656,0 12=RA,15,C65655,0 13=RA,16,C66151,0 14=RA,17,C66152,0 15=PA,18,C65759,0 16=PA,19,C65758,0 17=RB,0,C66524,0 18=RB,1,C66525,0 19=PA,0,C66684,0 20=UA,0,C66685,0 21=RA,2,C65607,0 22=RA,3,C65615,0 23=P174,6,CM17:6,0 24=PA,9,CM6:1,0 25=PB,4,C65759,0 26=PB,5,CL4:S,16 [AutoSave] AutoSaveEnabled=No Next=1 Interval=60 Files=10 SaveOnGround=No [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [WideServer] WideFSenabled=Yes [Axes] 8=BX,256,F,66424,0,0,0 9=BY,256,F,66422,0,0,0 10=BZ,256,F,66425,0,0,0 0=CX,256,F,66387,0,0,0 1=CY,256,F,66388,0,0,0 2=CR,256,F,65764,0,0,0 3=AX,256,F,65763,0,0,0 4=AY,256,F,65694,0,0,0 5=AZ,256,F,66420,0,0,0 6=AU,256,F,66423,0,0,0 7=AV,256,F,66421,0,0,0 11=BX,256,F,66424,0,0,0 12=BY,256,F,66422,0,0,0 13=BZ,256,F,66425,0,0,0 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16383,0,0,16256/8 SlopeAileron=3 Elevator=-16384,0,0,16192 Rudder=-16384,-64,-64,16127 Throttle1=-16383,-16383,-16383,16383/40 Throttle2=-16383,-512,512,16256/40 SyncSlopeThrottle2=26/26 Mixture1=-16384,8192,8192,16000/32 Mixture2=-16384,8192,8192,16128/32 PropPitch1=-16384,0,512,16383/32 PropPitch2=-16384,0,512,16256/32 SyncSlopePropPitch2=26/26 SlopeRudder=6 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 Mixture=-16380,16380 SlopeElevator=2 [Keys] 22=68,8,66279,0 26=88,8,65810,0 28=90,8,66510,0 32=82,8,66732,0 38=123,8,66511,0 43=112,8,66448,0 51=83,9,65815,0 52=68,9,65814,0 54=71,9,65819,0 56=90,9,65816,0 58=86,8,66069,0 62=88,9,65818,0 64=113,8,66452,0 66=114,8,66463,0 68=115,8,66464,0 70=116,8,66465,0 72=117,8,66509,0 74=118,8,66510,0 79=120,8,66102,0 81=84,8,66853,0 83=66,8,65584,0 87=84,9,65901,0 94=78,8,65913,0 96=77,8,65912,0 102=103,8,65912,0 106=105,8,65914,0 107=104,8,65913,0 110=98,8,65911,0 111=99,8,65910,0 112=65,8,65580,0 114=97,8,65913,0 116=100,8,65909,0 117=101,8,65912,0 121=81,8,66288,0 125=87,8,65793,0 126=69,8,65728,0 128=220,8,66854,0 129=83,8,66278,0 [sounds] Path=C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\ Device1=Primary Sound Driver Device2=Digital Audio (S/PDIF) (High Definition Audio Device) Device3=Digital Audio (HDMI) (High Definition Audio Device) Device4=Speakers (High Definition Audio Device) [Profile.F1 Cessna Mustang] 1=F1 Cessna Mustang 2=F1_Cessna_Mustang3 [Axes.F1 Cessna Mustang] 0=CX,256,D,7,0,0,0 1=CY,256,D,8,0,0,0 2=CR,256,D,3,0,0,0 3=AX,256,D,1,0,0,0 4=AY,256,D,2,0,0,0 5=AZ,256,F,66420,0,0,0 6=AU,256,F,66423,0,0,0 7=BY,256,F,66422,0,0,0 8=BZ,256,F,66425,0,0,0 9=DX,256,D,9,0,0,0 10=DY,256,D,10,0,0,0 [Keys.F1 Cessna Mustang] 1=103,8,65912,0 3=104,8,65913,0 8=99,8,66778,0 9=98,8,66781,0 10=97,8,66780,0 75=71,8,L4:T,3 77=77,8,L4:T,17 80=90,8,L4:T,4 82=88,8,L4:T,5 85=67,8,L4:T,7 101=66,8,65584,0 116=135,8,66783,0 119=219,8,66776,0 120=221,8,66777,0 122=85,8,66779,0 124=73,8,66754,0 126=79,8,66784,0 130=75,8,66786,0 132=188,8,66788,0 134=190,8,66787,0 135=76,8,66785,0 139=220,8,66854,0 144=86,8,L4:T,8 146=100,8,66506,190 148=101,8,66506,120 151=102,8,66506,260 154=96,8,66506,110 156=110,8,66506,231 158=82,8,66506,230 162=46,8,66530,0 166=89,8,L4:T,0 167=70,8,L4:T,2 169=84,8,L4:T,6 171=83,8,L4:T,12 173=68,8,L4:T,13 175=69,8,L4:T,16 178=65,8,L4:T,11 181=72,8,L4:T,1 183=78,8,L4:T,18 [buttons.F1 Cessna Mustang] 10=P109,6,CL4:V,0 12=P109,7,CL4:T,10 16=P174,2,C65729,0 17=P174,3,C65724,0 18=U109,6,CL4:T,0 19=U109,7,CL4:T,10 20=P109,0,C66239,0 21=U109,0,C66239,0 22=P109,1,C66052,0 23=U109,1,C66053,0 24=P109,2,C66379,0 25=U109,2,C66379,0 26=P109,3,C66240,0 27=U109,3,C66240,0 28=P109,4,C66059,0 29=U109,4,C66060,0 30=P109,5,C66378,0 31=U109,5,C66378,0 32=P174,0,C65580,18 33=P174,1,C65725,0 37=P174,5,CM17:7,0 40=P174,7,CM17:10,0 41=P174,9,CM19:1,0 42=P174,10,CM19:2,0 43=P174,14,CM19:4,0 44=P174,12,CM19:3,0 45=P174,13,CM19:3,0 46=P174,15,CM19:4,0 47=P174,11,CM19:2,0 48=P174,8,CM19:1,0 49=P174,16,CM19:6,0 50=P174,17,CM19:6,0 51=P174,19,CM19:7,0 52=P174,18,CM19:7,0 53=P174,21,CM20:1,0 54=P174,20,CM20:1,0 55=P174,22,CM19:9,0 56=P174,23,CM19:9,0 57=U174,9,CM19:1,0 58=U174,8,CM19:1,0 59=U174,10,CM19:2,0 60=U174,11,CM19:2,0 61=U174,12,CM19:3,0 62=U174,13,CM19:3,0 63=U174,15,CM19:4,0 64=U174,14,CM19:4,0 65=U174,17,CM19:6,0 66=U174,16,CM19:6,0 67=U174,18,CM19:7,0 68=U174,19,CM19:7,0 69=U174,20,CM20:1,0 70=U174,21,CM20:1,0 71=U174,23,CM19:9,0 72=U174,22,CM19:9,0 73=PD,2,C66079,0 74=PD,3,C66080,0 75=PD,4,C65759,0 76=PD,5,C65758,0 77=PB,4,CL4:T,13 79=PB,5,CL4:S,12 [MacroFiles] 1=AP ALT Hold 2=Mustang_ALT_Hold 3=F1Mustang 4=C510AP 5=F1 MustangAP 6=F1 C510 AP 7=F1 C510 FMS 8=F1 C510 TQ 9=SR 22 GTS 10=SR22GTS 11=SR22GTSLights 12=GNS530 13=SR22AP 14=SR22 PDF 15=SR22 MFD 16=F1 C510 AP2 17=F1C510AP 18=test1 19=F1C510APKNOBS 20=F1APVSDEC 21=SR22GTSMISSING 22=sr22notwrking 23=MFDKNBLH 24=SR22MFDLHKNB 25=F1_182TC_KNOBS 26=F1_182TC_Switchs [LuaFiles] 1=LUA C510 2=LUA C510 2 3=F1MustangAPCtl 4=F1MustangSwCtl 5=Ipcready 6=GFpower 7=ipcDebug [Monitor] Display=1 [Profile.F1 Skylane 182T] 1=F1_Cessna_T182T1 [buttons.F1 Skylane 182T] 10=P109,6,CL1:R,1 12=P109,7,CL1:R,3 16=P174,2,C65729,0 17=P174,3,C65724,0 18=U109,6,CL1:R,1 19=U109,7,CL1:R,3 20=P109,0,C66239,0 21=U109,0,C66239,0 22=P109,1,C66052,0 23=U109,1,C66053,0 24=P109,2,C66379,0 25=U109,2,C66379,0 26=P109,3,C66240,0 27=U109,3,C66240,0 28=P109,4,C66059,0 29=U109,4,C66060,0 30=P109,5,C66378,0 31=U109,5,C66378,0 32=P174,0,C65580,0 33=P174,1,C65725,0 37=P174,5,CM17:7,0 38=P174,4,CM17:6,0 39=P174,6,CM17:10,0 40=P174,7,C66042,0 43=P174,14,C65663,0 44=P174,12,C65662,0 45=P174,13,C65662,0 46=P174,15,C65663,0 49=P174,16,C65893,0 50=P174,17,C65892,0 51=P174,19,CM19:7,0 52=P174,18,C65892,0 55=P174,22,C65894,0 56=P174,23,C65894,0 61=U174,12,C65662,0 62=U174,13,C65662,0 63=U174,15,C65663,0 64=U174,14,C65663,0 65=U174,17,CM19:6,0 66=U174,16,C65893,0 67=U174,18,C65892,0 68=U174,19,CM19:7,0 71=U174,23,C65894,0 72=U174,22,C65894,0 73=P174,21,C65895,0 74=P174,9,C65880,0 75=U174,9,C65880,0 76=P174,8,C65880,0 77=U174,8,C65880,0 78=P174,10,C65879,0 79=U174,10,C65879,0 80=P174,11,CM25:2,0 81=U174,11,CM25:2,0 82=U174,21,C65895,0 83=PA,9,C65895,0 84=UA,9,C65895,0 [Keys.F1 Skylane 182T] 8=99,8,66778,0 9=98,8,66781,0 10=97,8,66780,0 75=71,8,L1:R,2 77=77,8,L1:R,10 80=90,8,L1:R,8 116=135,8,66783,0 119=219,8,66776,0 120=221,8,66777,0 122=85,8,66779,0 124=73,8,66754,0 126=79,8,66784,0 130=75,8,66786,0 132=188,8,66788,0 134=190,8,66787,0 135=76,8,66785,0 139=220,8,66854,0 146=100,8,66506,120 148=101,8,66506,130 154=96,8,66506,110 156=110,8,66506,231 162=46,8,66530,0 177=81,8,66237,0 178=87,8,65858,0 180=65,8,66317,0 183=88,8,66029,0 [Axes.F1 Skylane 182T] 0=CX,256,F,66387,0,0,0 1=CY,256,F,66388,0,0,0 2=CR,256,F,65764,0,0,0 3=AX,256,D,1,0,0,0 4=AY,256,D,2,0,0,0 5=AZ,256,F,66420,0,0,0 6=AU,256,F,66421,0,0,0 7=AV,256,F,66422,0,0,0 8=BX,256,D,9,0,0,0 9=BY,256,D,17,0,0,0 10=BZ,256,D,13,0,0,0 [JoystickCalibration.F1 Skylane 182T] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16383,0,0,16383/8 SlopeAileron=3 Elevator=-16383,0,0,16383/8 Rudder=-16383,0,0,16319/8 Mixture=-16380,16380 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 Throttle1=-15082,-15082,-15082,16383/40 Throttle2=-16383,-512,512,16256/40 SyncSlopeThrottle2=26/26 Mixture1=-7021,16383,16383,16383/40 Mixture2=-16384,8192,8192,16128/32 PropPitch1=-16384,0,512,16383/32 PropPitch2=-16384,0,512,16256/32 SyncSlopePropPitch2=26/26 SlopeRudder=5 [JoystickCalibration.F1 Cessna Mustang] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16383,0,0,16383/8 SlopeAileron=3 Elevator=-16384,0,0,16383 SlopeElevator=3 Rudder=-16383,0,0,16383/8 SlopeRudder=6 Mixture=-16380,16380 LeftBrake=-16384,16383/16 RightBrake=-16384,16383/16 Throttle1=-16383,-16383,-16383,16256/40 Throttle2=-16383,-512,512,16383/40 SyncSlopeThrottle2=26/26 Mixture1=-16384,8192,8192,16000/32 Mixture2=-16384,8192,8192,16128/32 PropPitch1=-16384,0,512,16383/32 PropPitch2=-16384,0,512,16256/32 SyncSlopePropPitch2=26/26

Hello, Last week I downloaded the latest version of FSUIPC. I noticed that I have an issue with my Cessna Mustang and other A/C that the down elevator is acting funny. When I push my Saitek Pro Flight yoke in that the elevator either does not respond or goes full down. Up elevator work normally, I look in the joystick calibration section of FSUIPC and the yoke appears to be working correctly. I was wondering if anyone else has run across this? This has just recently started and I'm afraid I might have to reload FSX. I run all my control axis through FSUIPC, another question I have is looking over the command list I haven't come across the commands to switch between 2D & 3D cockpit views. Thanks, John