Marco Aurelio

Hi Peter, First of all thanks so much for your attention in this Post ! Answering your question : All my Joysticks assingments are made by FSUIPC, I don't use FSX control settings, all controllers there, are disable and I didn't try to enable them to experimet with this aircraft. In Chapter 8 of the Airbus documentation there is a link to Aerosoft Forum, http://forum.aerosof...es/#entry432569, that I have been used and the problem has gone. What I did was delete Fsuipc.ini, saving before my original Fsuipc.ini, as you have recomended in your early post reply. After that, everything worked normally..., axis and buttons assignments, including reverse thrust ( Throttle Dec and Throttle Cut ) and axis calibrations. If you want I can attach or send the Chapter 8, a single and short pdf file, to you. BTW.... The Airbus X throttle deck worked as a real one. I believe that is only a change in the name to better express the range of the models A 320 to A 321, I bought this product 2 weeks ago ! Now at Aerosoft web store the product box is lable, Aerosoft X Extended A320/A321. Again, thanks. Marco Aurelio.

Ok.. Pete, I've only Extended version of the Aerosoft Airbus X, I can't say about the other versions. In some forum, I read that I would have to delete the Fsuipc.ini and the Fsuipc itself would regenerate it. I didn't try that because centainly I would lose my configs.... Thanks. Marco Aurelio. Cheers.

Sorry, I said : The others aircraft have NO problem...Only that aircaft, Airbus X Extended doesn't assign the axis. When I try to setup the axis in Airbus, no one axis appear in the MOVE______ ________ LEVER window in Axis Assignment Tab. Thanks, Marco.

Sorry, for some reason the Post goes out before I have finished it. It is Fun... Sorry ! What I meant was that all others aircrafts in my library have no problem in assign the axis in Axis Assigment Tab, only Airbus X Extended Thanks. Marco Aurelio

Hi Pete, What can I do when to a specific aircraft (Airbus X Extended) I don't see in Axis Assignment Tab any Axis when I try to setup it ? Thanks, Marco Aurelio

Thanks once more Pete. I apologize to have put the Post in a wrong place. Best Regards, Marco Aurelio

Hi Pete, What is the best way to update the FSUIPC for a registered user ? Thanks. Marco Aurelio

lost = lose.

Thanks once more. Using your information, I've just assigned The command " steering set " instead " steering tiller " using the drop down list of commands in Axis Assigment/Send to FS as a Normal Axis, and Steering tiller became independent visually and functionally from Rudder. During take-off, by the way using PMDG MD 11, the Steering lost sensibility and rudder augmented sensibility as airliner speed up. Using the rudder during taxi I've noticed too that nose whell (without using steering tiller) has moved around 10 degreeds along the rudder moviments, like as in real airplane. Best Regards, Marco Aurelio.

By the way the solution adopted betwen Rudder and Steering Tiller works very well during take-offsl. Congratulations !

Hi Peter, Is there some way to separate the action of steering tiller from Ruder ? I mean, moving only the steering tiller the ruder maintains fix ? I'm using Rudder Pedals assigned as Rudder and another joystick assigned as steering tiller. By the way the solution adopted betwen Rudder and Steering Tiller works very wee during take-offsl. Congratulations ! My question above is only a visual matter, during taxi and docking, not during take off.. Thanks once more. Marco Aurelio.

Thanks. The end.......

Sorry Peter, In this support you said that 4.853 wasn't last version ....... If you look at above you will see "4.853 is not "a more recent "version, is it the earliest supported version. The latest is 4.859d. See the Download Links subforum". ??????????? Thanks once more for your attention. Marco Aurelio.

Hi Peter, In the schiratti.com the actual version available is 4.853, please check. Thanks.

Sorry, I've been forgotten, mouse macros must be set in 2D Panels (in MD11 and 737 NGX too). But, any way, I'm going to dig into the documentation that you have mentioned above. Thanks once more! Best Regards, Marco Aurelio

Thanks. By the way, I've just tried to use mouse macros in PMDG MD11 and the same problem has happened, sorry I'm using now your more recent version 4.853. In the previous version I didn't encounter this issue. Peter, Does mouse macros no longer work in this recent version ? Thanks once more, Best Regards. Marco Aurelio

Hi Peter, I have been using FSUIPC mouse macros along SPAD to confiugure Pro Flight Panel in PMD MD11 with success. How to use that in PMDG 737 NGX. Thanks once more, From Brasil, Marco Aurelio

Thanks Peter, as you have suggested the problem has gone !

Hi Peter, Recently I update my OS from Windows 7 Ultimate 64 to Windows 8 Pro 64. I've been downloaded your latest FSUIPC4 version 4.853. When I try to run FSX in C:\FSX ( As you recommend ) the FSX gives me a message like that : --------------------------- Error --------------------------- Flight Simulator has detected a problem with a third-party software program (add-on): Name: FSUIPC4 DLL: FS new universal IPC interface Version: 4.853 Company: Peter L. Dowson File: Modules\FSUIPC4.dll Do you want to run this software (not recommended)? To avoid seeing this message in the future, uninstall this program or disable its ability to start when running Flight Simulator. For more information about third-party programs, contact the publisher or see http:\www.fsinsider.com. --------------------------- Yes No --------------------------- Well.... If a choose Yes The FSX doesn't load if a choose No the FSX load but without FSX . What can I do to get around that. Thanks, From Brasil, Marco Aurelio