Ifikratis

Problem solved! It appeared some objects .bgls was creating the crash. I deleted them and no crash anymore. At least at that location..

Thank you again. Right now I am doing the same flight with .cfg deleted and recreated without tweaks. I read somewhere that a default cfg may stop the CTDs. If that fails, i will start disabling photosceneries and airports underneath the CTD area. I hope the problem to be fixed. I have lost nearly 4 days investigating these crashes. I am afraid it may not be something so specific, because I got a crash 3 times some days ago when flying to Ben Gurion, Israel. So, the tweaked cfg producing the crashes would be the best possible scenario...

Dear Andy, Thank you very much for your reply. I discovered the MissingLibraryAlert=1 tweak and applied it under [scenery] in my .cfg. Unfortunately I did not got any message and the sim crashed again at the exact same location as before. I am going now to disable the photoscenery under the area I am getting the g3d.dll crash and see what happens. It is quite boring procedure as the flight time from Athens to the crash point (over Switzerland) is about 2 hours long..

Hi, I am using Prepar3D. Unfortunately I cannot complete any long flight using the Aerosoft's Airbus X Extended (latest version+latest hotfix). I don't know yet whether this error happens only with this aircraft, it is something I am planning to test. However your help would be extremely helpful to my research. For reference of the error, I have done twice the same route from Athens to Paris with the AXE A321, and I get a crash somewhere between Switzerland and France. Windows Event Viewer reporter the following both times: Faulting application name: Prepar3D.exe, version: 1.4.4747.0, time stamp: 0x50253a53 Faulting module name: g3d.dll, version: 0.0.0.0, time stamp: 0x50253ab4 Exception code: 0xc0000005 Fault offset: 0x00047a93 Faulting process id: 0x9ac Faulting application start time: 0x01ce7e56c93eb862 Faulting application path: C:\Program Files (x86)\Lockheed Martin\Prepar3D\Prepar3D.exe Faulting module path: C:\Program Files (x86)\Lockheed Martin\Prepar3D\g3d.dll Report Id: 31d85fed-ea5e-11e2-ade6-902b34da42e2 The simulator displayed and error and restarted losing the flight of course. Of course I use the latest FSUIPC module (registered version). I am aware that FSUIPC is supposed to have eliminated the p3d.dll errors that's why it's the place I thought I might get some directions. I use a good machine overclocked at 4.4Ghz, and I use photoscenery for my flights. In this flight there was no photoscenery only under Italy. Any help would be really welcomed. Best regards, Ifikratis EDIT: Just did the same route with the Captain Sim 777, and the sim crashed at the same location with the same g3d.dll ctd

Sir, I am also using v4.86 and while in windowed mode its works ok, in full screen when I press and hold the middle button, before I even move the mouse, then view freezes (dont changes) in a random angle. Then, after having pressed the middle button the only solution to change the view using mouse view is to go back to windowed mode. I don' t know why, but I know that this happened not only before but after a full format of my PC. From your reply, you seem to not believe me. Should I post a video in order to believe me? I would' t say that it is not working if It was working. Please understand. I think something must have gone unnoticed.

Dear Mr.Dowson, I have made a clean format in my computer, and installed P3D , not FSX. I have installed the latest FSUIPC version. However I still see the same problem with the mouse view. I can get it work correctly in window mode, but it does not work in full screen. I use TrackIR for the cockpit view, but I need the mouse vew for the external view. If you have any update regarding the issue, I would be happy to know. Thank you. Regards, Ifikratis

Yes, I know they don't seem logical but that is what I am getting. I tested a lot before I post. After your reply, I tested again in 3 airplanes and I get the same. 1) The mouse look works only in window mode. In Full Screen mode, If I press the middle button the view moves but very fast it stops and stays there. I have to press Alt+Enter to return to window mode to be able to have working mouse look again, or I press an assinged button to a standard view setting to see ahead. If I press again the middle button, the same happens. However, because of all these problems I ordered a trackIR, so don't waste your time for this.. 2) Ok, regarding the reverse problem it appears that the software of the Aircraft has the problem. It works correclty for all other aircraft except the Blackbox Airbus A319/320, witch I currently use. No matter if I have the spoiler reversed or not it has chosen one direction... I have to send an email to the developer. Thank you! Regards, Ifikratis

Dear Pete, There is still a little problem. The mouse look works only in windowed mode, not in fullscreen (in full screen it works when I press the middle button once, but then it stays there and doesn't move. I have to go back to windowed mode). However right now I'm not in a hurry for this, because I ordered a TrackIR, so it seems I will forget the mouse look. So, no need to hurry for this fix. Also, I don't know if this has to do with the test FSUIPC.dll module. I installed a Saitek Throttle quadrant, but I cannot reverse the Spoilers lever. I have set spoilers to an Axis and it works perfectly. But I want to reverse the axis. I enable Rev by clicking the Rev box in Spoilers Calibration tab, but it doesn't reverse. Is there any fix for that? Thank you very much. Regards, Ifikratis

Nice! That's why FSUIPC is such a successfull software! It has working and talented author! I am amazed by the volume of the tiny but so necessairy details and switces you have implimented in FSUIPC. Whatever I imagine for a small button to do, it is there. Thank you for your support and congratulations. Regards, Ifikratis

Dear Pete Dowson, You are a genius! You fixed it! Thank you very much! When I replaced your test FSUIPC4.dll, it worked correctly. When I press the middle button it is working. When I don't pressing it, it isn't. I can't believe I hit that unlikely circumstance after so many users! Thank you very very very much for your excellent support! :razz: :razz: :razz: Best regards, Ifikratis

Thank you very much Mr.Dowson. I really appreciate your kind response to my issue. For the time being I reinstalled Ezdok camera. Maybe its better from Opus I don't know yet. If you think of any possible conflict that produces my problem I would be happy to follow any possible fix. Thank you very much for your time. Regards, Ifikratis

Unfortunately, the results are exaclty the same. Like nothing changed. The mouselook changes as I move the mouse with mouse look enabled in fsuipc and don't stops when I assign either the 'Mouselook toggle', 'Mouse Look toggle' or 'Mouselook off" commands. I assinged them to 'Space', and 'O' buttons, both inactive buttons anywhere else. And of course having FS controls disabled. So, maybe it is not that the middle button is triggered. I used only FSX+FSUIPC. I also have already installed GEX, UTX, REX, Accufeel and some add-on airplanes. Opus was not enabled during this test. Something I should add is that when I have the mouse look box ticked and the look is changing as I move the mouse, I can see the mouse cursor. And when the mouse cursor goes above any button in the VC, I get a hand cursor. Then, the hand cursor lags the movement. You can see for example the hand cursor with a (-) in it laging-stopping the movement of the camera. You have to move much the mouse to get the view de-stucked.... Does this help you maybe?

Ok, THank you very much! I'll test right now and report. First uninstall again Ezdok.

Ok! I did a test. I re-installed Ezcam. Guess what...the middle button is working while Ezcam is running... :neutral: I mean the mouse look of Ezcam is working. If I disable mouse look from Ezcam settings and enable it in FSUIPC, it is not working again.

Dear Pete, Thanks again. If I press the middle button in the page we are here, a arrowed cross appears (to enable scroling in 2 directions). If I press it again it disappears. Normal. So the middle button works I suppose. I also tried another mouse with the same results. No, I have not any other mouse mode enabled in any button or key. I searched many times but I didn't found something nor I remember having assinged anything like that. Is it possible that Ezcam assigned something that cannot be removed? May I have to uninstall and reinstall FSUIPC? How that is performed?

Its unbelievable! I did exactly what you said. I de-assigned (I already had) space bar from FS and assigned space to mouslook toogle. Result : It is unable to control mouselook. I press space and nothing happens. The look continue to change when I move the mouse. I tried the Mouselook off. Again no response from any button. I assinged it even to a joystick button instead of keyboard. No result either. My middle button is not assigned to anything else. The problem history is the following. I uninstalled ezcam witch was successfully using the middle mouse button to enable mouse look. I uninstalled ezcam because I want to use Opus live Camera. However without Ezcam I lost and the mouse look. Totaly frustrated! Do you think I can try anythino more or I have to return to ezcam? Regards, Ifikratis

Dear sir, Thanks again for your help. I do not want to have controls 'Enabled' in FSX contrl menu. So, the default mouse look is not active for me. When I did enabled mouselook the first time (version 4.853) I wasn't getting the mouselook effect. I was getting a disappeared mouse cursor and I couldn't control anything in my PC. I restared my PC and this happened every time I started FSX. THen using the keyboard I navigated to the Mouse look tick box and deselected it. After that I already have installed the latest version and the mouselook was working when I re enabled. However, it was not working when pressing the middle button, it was working as I moved the mouse. Like the default fsx spacebar effect. Like the spacebar was always active and I can move look when I just move the mouse. I want to enable the effect when pressing the middle mouse button, or a button/key. Could you tell me how this is performed? Thank you again.

ok, I got the correct effect, but now I cannot use the menu bar. I want a button to enable-disable the mouse look. I tried assigning space to that, but no luck..any suggestion to turn on/off the effect during flight?

Ok, I fixed that fighting with the keyboard...now I'll try to make it work correctly

Dear sir, Thank you for your reply! I was using version 4.853. I tried to click on mouselock and the result is I cannot use my mouse at all. I have restarted my pc 2 times because now everytime I start FSX my mouse pointer become useless. How can I fix that? I am not alble to use FSX right now. I would like to not do a uninstall if possible, because I have calibration settings. I updated to the latest version after that..Waiting for your answer. Regards, Ifikratis

Hello, I am searching this for a number of days without any positive result. So, I decided to ask for help here. I am currently using FSX+OpusFSX+FSUIPC registered version. I should have my Controlers in FSX disabled (I use joystick and rudder pedals), because if I enable them, even with all joystick functions and axis disabled I get a flicker on the airlerons and rudder when I use them. The problem is I cannot find in FSUIPC, how I can press a key or the middle button of the mouse and then move the mouse and pan around. It is a very crutial control for flight simulator and I would be grateful for any solution. Please I do not want to enable FSX controls, I want to do it via FSUIPC. Thank you very much for your time. Regards, Ifikrais