Arndt777
-
Posts
103 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Arndt777
-
-
I had re-installed P3Dv5.1 (newest version) and updated to FSUIPC 6.1.0.
The recognition of axes and their calibration is working fine. But I don't have any success with buttons and switches (from Saitek Throttle Quadrants, GoFlight modules, buttons of my Brunner yoke). When opening the buttons & switches page, there is yoke # 1, button # 6 displayed. When I press any other button or switch, there is no reaction. So I cannot program them.
I enclose the log file.
-
Thank you so much, Pete and John!
I was able to solve the problem by pressing all buttons on my Saitek throttles.
Now everything is working just fine again.
Best regards
Arndt
-
Enclosed the Log file
-
I have the problem, that unit # / button # are only shown for the fraction of a second, then I press a button (GoFlight modules, Saitek throttle, Brunner yoke). After this fraction of a second, the display always is "jumping back" to the value 1 / 7. Therefore it is impossible to programm any button.
This problem is only with buttons. Axes are working fine.
I am sure, that my FSUIPC installation is fine (Windows 10, P3D v4.5). Especially I have installed the dll for GoFlight modules.
Any idea to solve this problem?
-
Thank you, Thomas! Much appreciated!
(oder auf gut Deutsch: Vielen Dank, Thomas!)
-
Sorry to bother you, Pete. Of course I had made a Google search before questioning in the forum.
-
Hello Pete,
I tried to locate the SayStatic program on http://code.google.com/p/raptor-chess-interface/downloads/detail?name=SayStatic.exe&can=2&q=, but I didn't found it. Can you help me out?
Kind regards
Arndt
-
Pete, I believe, our definitions of hanging are identical: I am starting the program, the first window 'Prepar3D is showing up, then at a RAM usage of around 70 MB, CPU usage is going down to 0%, the selection window (for selecting airport, plane, ...) is not showing up, this condition is remaining constant, and I have to end the P3D process via the task manager.
Therefore the information in the log file about frames is not correct: I do not reach the level of a flight. And the P3D process doesn't terminate 'normally', when P3D is hanging.
My interpretation is, that FSUIPC is conflicting with something. Not always, but mostly. Unfortunately I don't find the 'devil'...
Thank you for all your efforts! And sorry; if I haven't been clear all the time, but English is not by mother's language...
Arndt
-
I now finished the process of elimination. I erased all dll's and exe's, starting with P3D (I cannot imagine, that FSUIPC is conflicting with sceneries). And the end I erased FSUIPC. And now it is clear: if FSUIPC isn't there, my P3D is starting without problems. If it is there, the starting process is hanging. I even erased all FSUIPS files and did a new install. Same result.
But I don't know, why I have this effect. I am working with FSUIPC for decades, without problems.
I think, that I need a complete reinstall of everything.
Arndt
-
It a software producer, called pollypot software. So far, I wasn't aware of any network connection.
Arndt
P.S.: www.pollypotsoftware.org.uk
-
Unfortunately I am not a programmer ...
GIT means GoFlight Interface Tool. It is enabling owners of GoFlight modules to put a wider range of programs to the buttons, knobs, etv. of this GoFlight modules.
I already erased GIT, but there is no positive effect.
Arndt
-
Here are the two lua files.
I am trying now this process of elimination.
Arndt
-
I missed the last part of the log file:
88531 Starting everything now ...
88593 Using "D:\Prepar3D v3\Modules\GFDEV.DLL", version 2.2.6.0
88593 GoFlight GFP8 detected: 6 devices
88593 GoFlight GF166 detected: 3 devices
88593 GoFlight GFMCP detected: 1 device
88593 GoFlight GFRP48 detected: 1 device
88593 GoFlight GF46 detected: 1 device
88593 GoFlight GFLGT2 detected: 1 device
88593 GoFlight GFSECM detected: 2 devices
88593 GoFlight GFWP6 detected: 2 devices
89687 Advanced Weather Interface Enabled
156109 Sim stopped: average frame rate for last 73 secs = 21.3 fps
156109 Max AI traffic was 1 aircraft
208484 Sim stopped: average frame rate for last 48 secs = 19.9 fps
208484 Max AI traffic was 0 aircraft
554140 Sim stopped: average frame rate for last 302 secs = 19.9 fps
554140 Max AI traffic was 0 aircraft
577656 === NOTE: not calling SimConnect_Close ...
578672 System time = 01/09/2016 11:55:42, Simulator time = 04:46:27 (09:46Z)
578672 *** FSUIPC log file being closed
Minimum frame rate was 17.8 fps, Maximum was 27.8 fps
Minimum available memory recorded was 1871Mb
Average frame rate for running time of 447 secs = 20.2 fps
Maximum AI traffic for session was 1 aircraft
Memory managed: 216 Allocs, 216 Freed
********* FSUIPC Log file closed ***********
-
Next attempt. Start P3D. It is hanging, initial menu not showing up, no CPU activity anymore. Here the logfile:
********* FSUIPC4, Version 4.955j (30th August 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.3.5.17625
Reading options from "D:\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=5BDD0000
User Name="Arndt Laube"
User Addr="laube54@gmx.de"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
0 System time = 01/09/2016 11:46:03
0 FLT path = "C:\Users\Arndt777\Documents\Prepar3D v3 Files\"
15 ------ Module Version Check ------
15 acontain.dll: 3.3.5.17625
15 api.dll: 3.3.5.17625
15 controls.dll: 3.3.5.17625
15 fs-traffic.dll: 3.3.5.17625
15 G3D.dll: 3.3.5.17625
15 language.dll: 3.3.5.17625
15 sim1.dll: 3.3.5.17625
15 visualfx.dll: 3.3.5.17625
15 weather.dll: 3.3.5.17625
15 window.dll: 3.3.5.17625
15 ----------------------------------
15 Trying D:\Prepar3D v3\Modules\SimConnectP3D3.dll
15 Found it: trying to connect
15 FS path = "D:\Prepar3D v3\"
297 ---------------------- Joystick Device Scan -----------------------
312 Product= Saitek Pro Flight Quadrant
312 Manufacturer= Saitek
312 Vendor=06A3, Product=0C2D (Version 2.1)
312 Serial Number= Saitek
312 Product= vJoy - Virtual Joystick
312 Manufacturer= Shaul Eizikovich
312 Vendor=1234, Product=BEAD (Version 2.5)
312 Serial Number= 2.0.5
328 Product= PFC MFD Rudder Pedals
328 Manufacturer= Precision Flight Controls, Inc.
328 Vendor=0689, Product=D010 (Version 2.0)
328 Serial Number= Precision Flight Controls, Inc.
343 Product= Saitek Pro Flight Quadrant
359 Manufacturer= Saitek
359 Vendor=06A3, Product=0C2D (Version 2.1)
359 Serial Number= Saitek
359 -------------------------------------------------------------------
375 LogOptions=00000000 00000001
375 -------------------------------------------------------------------
375 ------ Setting the hooks and direct calls into the simulator ------
375 --- CONTROLS timer memory location obtained ok
375 --- SIM1 Frictions access gained
375 --- FS Controls Table located ok
375 --- Installed Mouse Macro hooks ok.
375 --- Wind smoothing fix is installed
375 --- SimConnect intercept for texts and menus option is off
375 --- All links okay (except older global weather setting method)
375 -------------------------------------------------------------------
375 SimConnect_Open succeeded: waiting to check version okay
375 Trying to use SimConnect Prepar3D
35922 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.3.3.3 (SimConnect: 3.3.0.0)
35922 Initialising SimConnect data requests now
35922 FSUIPC Menu entry added
36000 C:\Users\Arndt777\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
36000 D:\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
83484 System time = 01/09/2016 11:47:26, Simulator time = 04:46:01 (09:46Z)
83500 Aircraft="F-22 Raptor - 525th Fighter Squadron" -
I removed two lua files in the modules folder. I don't know, from which program they have been installed.
Then I restarted the PC and had a succuesful start of P3D. Here the FSUIPS log file:
********* FSUIPC4, Version 4.955j (30th August 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.3.5.17625
Reading options from "D:\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=5BDD0000
User Name="Arndt Laube"
User Addr="laube54@gmx.de"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
0 System time = 01/09/2016 11:46:03
0 FLT path = "C:\Users\Arndt777\Documents\Prepar3D v3 Files\"
15 ------ Module Version Check ------
15 acontain.dll: 3.3.5.17625
15 api.dll: 3.3.5.17625
15 controls.dll: 3.3.5.17625
15 fs-traffic.dll: 3.3.5.17625
15 G3D.dll: 3.3.5.17625
15 language.dll: 3.3.5.17625
15 sim1.dll: 3.3.5.17625
15 visualfx.dll: 3.3.5.17625
15 weather.dll: 3.3.5.17625
15 window.dll: 3.3.5.17625
15 ----------------------------------
15 Trying D:\Prepar3D v3\Modules\SimConnectP3D3.dll
15 Found it: trying to connect
15 FS path = "D:\Prepar3D v3\"
297 ---------------------- Joystick Device Scan -----------------------
312 Product= Saitek Pro Flight Quadrant
312 Manufacturer= Saitek
312 Vendor=06A3, Product=0C2D (Version 2.1)
312 Serial Number= Saitek
312 Product= vJoy - Virtual Joystick
312 Manufacturer= Shaul Eizikovich
312 Vendor=1234, Product=BEAD (Version 2.5)
312 Serial Number= 2.0.5
328 Product= PFC MFD Rudder Pedals
328 Manufacturer= Precision Flight Controls, Inc.
328 Vendor=0689, Product=D010 (Version 2.0)
328 Serial Number= Precision Flight Controls, Inc.
343 Product= Saitek Pro Flight Quadrant
359 Manufacturer= Saitek
359 Vendor=06A3, Product=0C2D (Version 2.1)
359 Serial Number= Saitek
359 -------------------------------------------------------------------
375 LogOptions=00000000 00000001
375 -------------------------------------------------------------------
375 ------ Setting the hooks and direct calls into the simulator ------
375 --- CONTROLS timer memory location obtained ok
375 --- SIM1 Frictions access gained
375 --- FS Controls Table located ok
375 --- Installed Mouse Macro hooks ok.
375 --- Wind smoothing fix is installed
375 --- SimConnect intercept for texts and menus option is off
375 --- All links okay (except older global weather setting method)
375 -------------------------------------------------------------------
375 SimConnect_Open succeeded: waiting to check version okay
375 Trying to use SimConnect Prepar3D
35922 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.3.3.3 (SimConnect: 3.3.0.0)
35922 Initialising SimConnect data requests now
35922 FSUIPC Menu entry added
36000 C:\Users\Arndt777\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
36000 D:\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
83484 System time = 01/09/2016 11:47:26, Simulator time = 04:46:01 (09:46Z)
83500 Aircraft="F-22 Raptor - 525th Fighter Squadron"
88531 Starting everything now ...
88593 Using "D:\Prepar3D v3\Modules\GFDEV.DLL", version 2.2.6.0
88593 GoFlight GFP8 detected: 6 devices
88593 GoFlight GF166 detected: 3 devices
88593 GoFlight GFMCP detected: 1 device
88593 GoFlight GFRP48 detected: 1 device
88593 GoFlight GF46 detected: 1 device
88593 GoFlight GFLGT2 detected: 1 device
88593 GoFlight GFSECM detected: 2 devices
88593 GoFlight GFWP6 detected: 2 devices
89687 Advanced Weather Interface Enabled
156109 Sim stopped: average frame rate for last 73 secs = 21.3 fps
156109 Max AI traffic was 1 aircraft
208484 Sim stopped: average frame rate for last 48 secs = 19.9 fps
208484 Max AI traffic was 0 aircraft
-
The next attempt was unsuccwssful again. FSUIPC log:
********* FSUIPC4, Version 4.955j (30th August 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.3.5.17625
Reading options from "D:\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=5CF60000
User Name="Arndt Laube"
User Addr="laube54@gmx.de"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
16 System time = 01/09/2016 06:10:53
16 FLT path = "C:\Users\Arndt777\Documents\Prepar3D v3 Files\"
16 ------ Module Version Check ------
16 acontain.dll: 3.3.5.17625
16 api.dll: 3.3.5.17625
16 controls.dll: 3.3.5.17625
16 fs-traffic.dll: 3.3.5.17625
16 G3D.dll: 3.3.5.17625
16 language.dll: 3.3.5.17625
16 sim1.dll: 3.3.5.17625
16 visualfx.dll: 3.3.5.17625
16 weather.dll: 3.3.5.17625
16 window.dll: 3.3.5.17625
16 ----------------------------------
16 Trying D:\Prepar3D v3\Modules\SimConnectP3D3.dll
32 Found it: trying to connect
47 FS path = "D:\Prepar3D v3\"
375 ---------------------- Joystick Device Scan -----------------------
375 Product= Saitek Pro Flight Quadrant
391 Manufacturer= Saitek
391 Vendor=06A3, Product=0C2D (Version 2.1)
391 Serial Number= Saitek
391 Product= vJoy - Virtual Joystick
391 Manufacturer= Shaul Eizikovich
391 Vendor=1234, Product=BEAD (Version 2.5)
391 Serial Number= 2.0.5
391 Product= PFC MFD Rudder Pedals
407 Manufacturer= Precision Flight Controls, Inc.
407 Vendor=0689, Product=D010 (Version 2.0)
407 Serial Number= Precision Flight Controls, Inc.
422 Product= Saitek Pro Flight Quadrant
422 Manufacturer= Saitek
422 Vendor=06A3, Product=0C2D (Version 2.1)
422 Serial Number= Saitek
422 -------------------------------------------------------------------
422 LogOptions=00000000 00000001
422 -------------------------------------------------------------------
422 ------ Setting the hooks and direct calls into the simulator ------
422 --- CONTROLS timer memory location obtained ok
422 --- SIM1 Frictions access gained
438 --- FS Controls Table located ok
438 --- Installed Mouse Macro hooks ok.
438 --- Wind smoothing fix is installed
438 --- SimConnect intercept for texts and menus option is off
438 --- All links okay (except older global weather setting method)
438 -------------------------------------------------------------------
438 SimConnect_Open succeeded: waiting to check version okay
438 Trying to use SimConnect Prepar3D
37579 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.3.3.3 (SimConnect: 3.3.0.0)
37579 Initialising SimConnect data requests now
37579 FSUIPC Menu entry added
37579 LUA.0: beginning "D:\Prepar3D v3\Modules\ipcInit.lua"
37579 LUA.0: ended "D:\Prepar3D v3\Modules\ipcInit.lua"
37594 LUA.1: server: waiting for client connection...
37610 C:\Users\Arndt777\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
37610 D:\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
377219 === NOTE: not calling SimConnect_Close ...
378235 System time = 01/09/2016 06:17:11
378235 *** FSUIPC log file being closed
Minimum frame rate was 32768.0 fps, Maximum was 0.0 fps
Minimum available memory recorded was 32768Mb
Maximum AI traffic for session was 1 aircraft
Memory managed: 5 Allocs, 5 Freed
********* FSUIPC Log file closed ***********
-
After the unsuccessful attempt above, I had a successful one. The FSUIPC log is as following:
********* FSUIPC4, Version 4.955j (30th August 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.3.5.17625
Reading options from "D:\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=5CF60000
User Name="Arndt Laube"
User Addr="laube54@gmx.de"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
16 System time = 01/09/2016 06:10:53
16 FLT path = "C:\Users\Arndt777\Documents\Prepar3D v3 Files\"
16 ------ Module Version Check ------
16 acontain.dll: 3.3.5.17625
16 api.dll: 3.3.5.17625
16 controls.dll: 3.3.5.17625
16 fs-traffic.dll: 3.3.5.17625
16 G3D.dll: 3.3.5.17625
16 language.dll: 3.3.5.17625
16 sim1.dll: 3.3.5.17625
16 visualfx.dll: 3.3.5.17625
16 weather.dll: 3.3.5.17625
16 window.dll: 3.3.5.17625
16 ----------------------------------
16 Trying D:\Prepar3D v3\Modules\SimConnectP3D3.dll
32 Found it: trying to connect
47 FS path = "D:\Prepar3D v3\"
375 ---------------------- Joystick Device Scan -----------------------
375 Product= Saitek Pro Flight Quadrant
391 Manufacturer= Saitek
391 Vendor=06A3, Product=0C2D (Version 2.1)
391 Serial Number= Saitek
391 Product= vJoy - Virtual Joystick
391 Manufacturer= Shaul Eizikovich
391 Vendor=1234, Product=BEAD (Version 2.5)
391 Serial Number= 2.0.5
391 Product= PFC MFD Rudder Pedals
407 Manufacturer= Precision Flight Controls, Inc.
407 Vendor=0689, Product=D010 (Version 2.0)
407 Serial Number= Precision Flight Controls, Inc.
422 Product= Saitek Pro Flight Quadrant
422 Manufacturer= Saitek
422 Vendor=06A3, Product=0C2D (Version 2.1)
422 Serial Number= Saitek
422 -------------------------------------------------------------------
422 LogOptions=00000000 00000001
422 -------------------------------------------------------------------
422 ------ Setting the hooks and direct calls into the simulator ------
422 --- CONTROLS timer memory location obtained ok
422 --- SIM1 Frictions access gained
438 --- FS Controls Table located ok
438 --- Installed Mouse Macro hooks ok.
438 --- Wind smoothing fix is installed
438 --- SimConnect intercept for texts and menus option is off
438 --- All links okay (except older global weather setting method)
438 -------------------------------------------------------------------
438 SimConnect_Open succeeded: waiting to check version okay
438 Trying to use SimConnect Prepar3D
37579 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.3.3.3 (SimConnect: 3.3.0.0)
37579 Initialising SimConnect data requests now
37579 FSUIPC Menu entry added
37579 LUA.0: beginning "D:\Prepar3D v3\Modules\ipcInit.lua"
37579 LUA.0: ended "D:\Prepar3D v3\Modules\ipcInit.lua"
37594 LUA.1: server: waiting for client connection...
37610 C:\Users\Arndt777\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
37610 D:\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
-
Yes, I have also tried to startP3D with a default CFG. Here you find the FSUIPC4 log after another unsuccessful attempt, which I did right now:
********* FSUIPC4, Version 4.955j (30th August 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.3.5.17625
Reading options from "D:\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=56AB0000
User Name="Arndt Laube"
User Addr="laube54@gmx.de"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
235 System time = 31/08/2016 20:25:43
235 FLT path = "C:\Users\Arndt777\Documents\Prepar3D v3 Files\"
235 ------ Module Version Check ------
235 acontain.dll: 3.3.5.17625
235 api.dll: 3.3.5.17625
235 controls.dll: 3.3.5.17625
235 fs-traffic.dll: 3.3.5.17625
235 G3D.dll: 3.3.5.17625
235 language.dll: 3.3.5.17625
235 sim1.dll: 3.3.5.17625
235 visualfx.dll: 3.3.5.17625
235 weather.dll: 3.3.5.17625
235 window.dll: 3.3.5.17625
235 ----------------------------------
235 Trying D:\Prepar3D v3\Modules\SimConnectP3D3.dll
250 Found it: trying to connect
266 FS path = "D:\Prepar3D v3\"
594 ---------------------- Joystick Device Scan -----------------------
610 Product= Saitek Pro Flight Quadrant
610 Manufacturer= Saitek
610 Vendor=06A3, Product=0C2D (Version 2.1)
610 Serial Number= Saitek
610 Product= vJoy - Virtual Joystick
610 Manufacturer= Shaul Eizikovich
610 Vendor=1234, Product=BEAD (Version 2.5)
610 Serial Number= 2.0.5
610 Product= PFC MFD Rudder Pedals
625 Manufacturer= Precision Flight Controls, Inc.
625 Vendor=0689, Product=D010 (Version 2.0)
625 Serial Number= Precision Flight Controls, Inc.
641 Product= Saitek Pro Flight Quadrant
641 Manufacturer= Saitek
641 Vendor=06A3, Product=0C2D (Version 2.1)
641 Serial Number= Saitek
641 -------------------------------------------------------------------
657 LogOptions=00000000 00000001
657 -------------------------------------------------------------------
657 ------ Setting the hooks and direct calls into the simulator ------
657 --- CONTROLS timer memory location obtained ok
657 --- SIM1 Frictions access gained
657 --- FS Controls Table located ok
657 --- Installed Mouse Macro hooks ok.
657 --- Wind smoothing fix is installed
657 --- SimConnect intercept for texts and menus option is off
657 --- All links okay (except older global weather setting method)
657 -------------------------------------------------------------------
657 SimConnect_Open succeeded: waiting to check version okay
657 Trying to use SimConnect Prepar3D
38875 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.3.3.3 (SimConnect: 3.3.0.0)
38875 Initialising SimConnect data requests now
38875 FSUIPC Menu entry added
38875 LUA.0: beginning "D:\Prepar3D v3\Modules\ipcInit.lua"
38875 LUA.0: ended "D:\Prepar3D v3\Modules\ipcInit.lua"
38891 LUA.1: server: waiting for client connection...
38907 C:\Users\Arndt777\AppData\Local\Lockheed Martin\Prepar3D v3\Prepar3D_Default.fxml
38907 D:\Prepar3D v3\SimObjects\Airplanes\IRIS Raptor Driver\Raptor.air
40438 ***** HID USB device reconnected: re-initialising FSUIPC connections
40453 ---------------------- Joystick Device Scan -----------------------
40469 Product= Saitek Pro Flight Quadrant
40469 Manufacturer= Saitek
40469 Vendor=06A3, Product=0C2D (Version 2.1)
40469 Serial Number= Saitek
40469 Product= vJoy - Virtual Joystick
40469 Manufacturer= Shaul Eizikovich
40469 Vendor=1234, Product=BEAD (Version 2.5)
40469 Serial Number= 2.0.5
40469 Product= PFC MFD Rudder Pedals
40485 Manufacturer= Precision Flight Controls, Inc.
40485 Vendor=0689, Product=D010 (Version 2.0)
40485 Serial Number= Precision Flight Controls, Inc.
40500 Product= Saitek Pro Flight Quadrant
40500 Manufacturer= Saitek
40500 Vendor=06A3, Product=0C2D (Version 2.1)
40500 Serial Number= Saitek
40500 -------------------------------------------------------------------
40516 ***** HID USB device reconnected: re-initialising FSUIPC connections
40516 ---------------------- Joystick Device Scan -----------------------
40532 Product= Saitek Pro Flight Quadrant
40532 Manufacturer= Saitek
40532 Vendor=06A3, Product=0C2D (Version 2.1)
40532 Serial Number= Saitek
40532 Product= vJoy - Virtual Joystick
40532 Manufacturer= Shaul Eizikovich
40532 Vendor=1234, Product=BEAD (Version 2.5)
40532 Serial Number= 2.0.5
40532 Product= PFC MFD Rudder Pedals
40547 Manufacturer= Precision Flight Controls, Inc.
40547 Vendor=0689, Product=D010 (Version 2.0)
40547 Serial Number= Precision Flight Controls, Inc.
40563 Product= Saitek Pro Flight Quadrant
40563 Manufacturer= Saitek
40563 Vendor=06A3, Product=0C2D (Version 2.1)
40563 Serial Number= Saitek
40563 -------------------------------------------------------------------
40578 ***** HID USB device reconnected: re-initialising FSUIPC connections
40594 ---------------------- Joystick Device Scan -----------------------
40610 Product= Saitek Pro Flight Quadrant
40610 Manufacturer= Saitek
40610 Vendor=06A3, Product=0C2D (Version 2.1)
40610 Serial Number= Saitek
40610 Product= vJoy - Virtual Joystick
40610 Manufacturer= Shaul Eizikovich
40610 Vendor=1234, Product=BEAD (Version 2.5)
40610 Serial Number= 2.0.5
40610 Product= PFC MFD Rudder Pedals
40625 Manufacturer= Precision Flight Controls, Inc.
40625 Vendor=0689, Product=D010 (Version 2.0)
40625 Serial Number= Precision Flight Controls, Inc.
40641 Product= Saitek Pro Flight Quadrant
40641 Manufacturer= Saitek
40641 Vendor=06A3, Product=0C2D (Version 2.1)
40641 Serial Number= Saitek
40641 -------------------------------------------------------------------
40657 ***** HID USB device reconnected: re-initialising FSUIPC connections
40657 ---------------------- Joystick Device Scan -----------------------
40672 Product= Saitek Pro Flight Quadrant
40672 Manufacturer= Saitek
40672 Vendor=06A3, Product=0C2D (Version 2.1)
40672 Serial Number= Saitek
40672 Product= vJoy - Virtual Joystick
40672 Manufacturer= Shaul Eizikovich
40672 Vendor=1234, Product=BEAD (Version 2.5)
40672 Serial Number= 2.0.5
40672 Product= PFC MFD Rudder Pedals
40688 Manufacturer= Precision Flight Controls, Inc.
40688 Vendor=0689, Product=D010 (Version 2.0)
40688 Serial Number= Precision Flight Controls, Inc.
40703 Product= Saitek Pro Flight Quadrant
40703 Manufacturer= Saitek
40703 Vendor=06A3, Product=0C2D (Version 2.1)
40703 Serial Number= Saitek
40703 -------------------------------------------------------------------
80563 === NOTE: not calling SimConnect_Close ...
81578 System time = 31/08/2016 20:27:05
81578 *** FSUIPC log file being closed
Minimum frame rate was 32768.0 fps, Maximum was 0.0 fps
Minimum available memory recorded was 32768Mb
Maximum AI traffic for session was 1 aircraft
Memory managed: 5 Allocs, 5 Freed
********* FSUIPC Log file closed ***********
-
I followed your recommendations (thank you very much!) , but without success. Either P3D is hanging after start and does not reach the initial menu, or it is reaching the initial menu without any problems. There seems to be no logic.
I even tried the repair function of P3D, but again without success.
What changes had I conducted over the last weeks? Some new sceneries, and I updated P3D to the newest version.
Arndt
-
Hello,
over the last days I had severe problems to start P3D. in approximately 50 % of the cases the start process of P3D is stopping after a few seconds. These problems seem to be related to FSUIPC. If I disable FsUIPC, these problems don't exist.
I am using Windows 10 64bit, P3D 3.3.5.17625 and FSUIPC4995j.
Here is the log file of an unsuccessful start of FSUIPC:
********* FSUIPC4, Version 4.955j (30th August 2016) by Pete Dowson *********
Windows version reported as 6.2.?.9200
Prepar3D.exe version = 3.3.5.17625
Reading options from "D:\Prepar3D v3\Modules\FSUIPC4.ini"
Running inside Prepar3D v3 on Windows 8.0 or later
Module base=57870000
User Name="Arndt Laube"
User Addr="laube54@gmx.de"
FSUIPC4 Key is provided
WIDEFS7 not user registered, or expired
15 System time = 31/08/2016 16:41:05
15 FLT path = "C:\Users\Arndt777\Documents\Prepar3D v3 Files\"
15 ------ Module Version Check ------
15 acontain.dll: 3.3.5.17625
15 api.dll: 3.3.5.17625
15 controls.dll: 3.3.5.17625
15 fs-traffic.dll: 3.3.5.17625
15 G3D.dll: 3.3.5.17625
15 language.dll: 3.3.5.17625
15 sim1.dll: 3.3.5.17625
15 visualfx.dll: 3.3.5.17625
15 weather.dll: 3.3.5.17625
15 window.dll: 3.3.5.17625
15 ----------------------------------
15 Trying D:\Prepar3D v3\Modules\SimConnectP3D3.dll
15 Found it: trying to connect
15 FS path = "D:\Prepar3D v3\"
187 ---------------------- Joystick Device Scan -----------------------
203 Product= Saitek Pro Flight Quadrant
203 Manufacturer= Saitek
203 Vendor=06A3, Product=0C2D (Version 2.1)
203 Serial Number= Saitek
203 Product= vJoy - Virtual Joystick
203 Manufacturer= Shaul Eizikovich
203 Vendor=1234, Product=BEAD (Version 2.5)
203 Serial Number= 2.0.5
203 Product= PFC MFD Rudder Pedals
218 Manufacturer= Precision Flight Controls, Inc.
218 Vendor=0689, Product=D010 (Version 2.0)
218 Serial Number= Precision Flight Controls, Inc.
234 Product= Saitek Pro Flight Quadrant
234 Manufacturer= Saitek
234 Vendor=06A3, Product=0C2D (Version 2.1)
234 Serial Number= Saitek
234 -------------------------------------------------------------------
250 LogOptions=00000000 00000001
250 -------------------------------------------------------------------
250 ------ Setting the hooks and direct calls into the simulator ------
250 --- CONTROLS timer memory location obtained ok
250 --- SIM1 Frictions access gained
250 --- FS Controls Table located ok
250 --- Installed Mouse Macro hooks ok.
250 --- Wind smoothing fix is installed
250 --- SimConnect intercept for texts and menus option is off
250 --- All links okay (except older global weather setting method)
250 -------------------------------------------------------------------
250 SimConnect_Open succeeded: waiting to check version okay
250 Trying to use SimConnect Prepar3D
35187 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.3.3.3 (SimConnect: 3.3.0.0)
35187 Initialising SimConnect data requests now
35187 FSUIPC Menu entry added
35187 LUA.0: beginning "D:\Prepar3D v3\Modules\ipcInit.lua"
35187 LUA.0: ended "D:\Prepar3D v3\Modules\ipcInit.lua"
35203 LUA.1: server: waiting for client connection...
35218 C:\Users\Arndt777\Documents\Prepar3D v3 Files\Start Duke B60.fxml
35218 D:\Prepar3D v3\SimObjects\Airplanes\RealAir Duke B60 V2\RealAir_Duke.air
163093 === NOTE: not calling SimConnect_Close ...
164093 System time = 31/08/2016 16:43:49
164093 *** FSUIPC log file being closed
Minimum frame rate was 32768.0 fps, Maximum was 0.0 fps
Minimum available memory recorded was 32768Mb
Maximum AI traffic for session was 1 aircraft
Memory managed: 5 Allocs, 5 Freed
********* FSUIPC Log file closed ***********
And here you find the dll.xml:
?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="Launch" version="1,0">
<Descr>Launch</Descr>
<Filename>dll.xml</Filename>
<Disabled>False</Disabled>
<Launch.ManualLoad>False</Launch.ManualLoad>
<Launch.Addon>
<Name>ObjectFlow</Name>
<Path>D:\Prepar3D v3\ORBX\FTX_AU\FTXAA_ORBXLIBS\Scenery\ObjectFlow_P3D.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Sode</Name>
<Path>D:\12bPilot\SODE\SimObjectAnimationModule.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>FSUIPC 4</Name>
<Disabled>False</Disabled>
<Path>Modules\FSUIPC4.dll</Path>
</Launch.Addon>
</SimBase.Document>Can you detect from this information the cause of my problem? What do I have to do to have a smooth start of P3D and FSUIPC?
Regards
Arndt
-
Hallo Volker,
jetzt habe ich den Fehler gefunden. Es lag an den Berechtigungen.Ich habe diese für den Ordner mit den P3D-Plänen immer unter 'Ordner-Eigenschaften' und 'Freigabe' unter dem Menüpunkt 'Erweiterte Freigabe' vorgenommen. Jetzt habe ich dies aber unter dem darüber liegenden Menü-Punkt 'Freigabe' und dann mit 'Heimnetzgruppe hinzufügen mit Lesen/Schreiben' gemacht. Und nun funktioniert der Zugriff von meinem Zweit-Rechner aus tadellos und ich kann Pläne aus FSC heraus, das ja auf einem Zweit-Rechner liegt, auf meinem Flusi-Rechner speichern.
Beste Grüße
Arndt
-
... und hier die Angaben zu meiner Software:
1. Prepar3D v3
2. Fsuipc 4.949 Wide FS 7.949
3. FSC 9.6. Rev.2
4. Win 10 64
-
Guten Abend, und allen Lesern ein gutes Jahr 2016!
Ich habe seit ein paar Tagen FSC auf einen Zweit-PC ausgelagert. Dieser ist als Heimnetzwerk mit meinem Flusi-Rechner verbunden, auf dem ich Prepar3D v3 installiert habe. Das Zusammenspiel erfolgt während eines Fluges über WideFS und klappt hervorragend.
Probleme habe ich aber beim Abspeichern eines Flugplans im pln-Format von P3D. Der Ordner für die P3D-Flugpläne liegt auf meinem Flusi-Rechner und ist 'freigegeben': Ein Speichern eines in FSC erstellten Fluges im pln-Format von meinem Zweit-Rechner aus sollte also möglich sein, zumal im FSC alle Pfad-Angaben korrekt gespeichert sind. Trotzdem erhalte ich folgende Fehler-Meldung:
"Error in writing FS10 plan! ( 75 )"
und der Plan wird im Folder Prepar3D v3 Files' nicht gespeichert.
Wo könnte der Fehler liegen?
Beste Grüße
Arndt
-
Hallo Volker,
ja, danke, hat sich damit auch erledigt.
Arndt
FSUIPC6.1.0 and GoFlight devices
in FSUIPC Support Pete Dowson Modules
Posted
Thank you for the hint!
At the end it was not a faulty button, but one of the Saitek Throttle Quadrants was not properly connected to an USB hub.
After connecting in a right way, there is no problem anymore.