Arndt777
-
Posts
103 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Downloads
Posts posted by Arndt777
-
-
Hallo Volker,
die Installation war korrekt, zur Sicherheit habe ich aber noch einmal neu installiert.
Fehler/Problem war folgendes
FSC startet bei mir automatisch durch die exe-Anwendung in Appdata/Roaming/Lockheed Martin/Prepar3D v2:
<Launch.Addon>
<Disabled>False</Disabled>
<Name>FlightSim Commander</Name>
<ManualLoad>False</ManualLoad>
<Path>D:\FlightSim Commander\FSC.exe</Path>
<CommandLine />
</Launch.Addon>
Das funktioniert tadellos, da durch die exe-Anwendung ein Programm anscheinend immer "als Administrator" gestartet wird.Darüber hinaus hatte ich FSC auch an die Taskleiste "angeheftet". Wenn man diesen Icon anklickt, startet man anscheinend das Programm nicht als Administrator. Rechtsklick ist bei Icons auf der Taskleiste nicht möglich, bzw. da wird "als Administrator öffnen" nicht als Option angeboten.
Bei mir war es zu dem Fehler gekommen, wenn ich FSC über den Icon auf der Taskleiste gestartet habe.
Naja, nun bin ich wieder etwas schlauer...
Gruss
Arndt
-
Hello,
I am using FSC 9.6. My Problem: FSCDbManager cannot remember Flight Simulator Path and Scenery Library Path. Consequence: Each time I open FSCDbManager, I habe to select Flight Simulator Path and Scenery Library Path again. Additional observations: If I have selected Flight Simulator Path and Scenery Library Path and run the Update Airports function, it is working fine, if I automatically start FSC with P3D. But if I close FSC while PsD is running, then I cannot open it again, because then it doesn't remember Flight Simulator Path and Scenery Library Path. And additional information: I only can use FSC, whwn P3D is running.
How can I solve this problem?
Regards
Arndt
-
Thank you, Pete! It's working perfectly.
Regards
Arndt
-
Hello Pete,
thank you very much for your fast reaction. I have installed 4.939c. Unfortunately it repeatedly caused a CTD at startup of P3D, and so I had to disable the modules folder within my P3D 2.5. installation.
Kind regards
Arndt
-
Hello,
there is a new download version of P3D, 2.5.12943.0. I tried to install FSUIPC 4.939, but it does not recognize the new download version of P3D 2.5.
Kindest regards
Arndt
-
Hi Volker,
thank you for your advice!
The firewall was the devil. It blocked the fsc.exe.
Regards
Arndt
-
Hello Volker,
yes, it worked in the versions 9.4 and prior without any problems.
Regards
Arndt
-
Hello,
after installation of version 9.5, I always get the message "Error in Weather file! Download the file again!" when downloading weather. If I afterwards press "show weather", then wind arrows etc. are shown. But I don't know whether this is really the actual weather at a place.
Any ideas?
Regards
Arndt
-
Hello Volker,
many thanks for the quick reply!
Kindest regards
Arndt
-
Hello Andy,
many thanks! You are right: shift+ctrl+x is the same as crtl+shift+x! I didn't know this before.
Kindest regards
Arndt
-
Hello again,
now I have seen a topic below, dealing with a similar problem.
I have installed FSUIPC version 4859t, but the problem is still there:
My keypresses are shift+ctrl+X, but FSUIPC is registering ctrl+shift+X.
Kindest regards
Arndt
-
Hello,
I tried to save the hotkeys for the GPS window on buttons of my GoFlight modul, but I failed:
If I do this within the GoFlight software, then there is no reaction of the GPS window of FS Commander if I press the GoFlight buttons.
If I try to program the GoFlight button within FSUIPC, then I fail, because FSUIPC does not take commands like shift+ctrl+X, but always is changing it for example to ctrl+shift+X.
Can anyone help? Is it possible to change the hotkey commands by myself to a format, which is accepted by FSUIPC?
Kind regards
Arndt
.
-
Hello,
I would like to program a button of my GoFlight modul in FSUIPC with shift+ctrl+X, in order to map a hotkey of FS Commander.
But FSUIPC is not taking this command. It is always saving ctrl+shift+X instead, although I press the keyboard buttons in a different way.
Is there a solution or workaround?
Kindest regards
Arndt
-
Solved!!!
Thank you, Volker!
-
Sorry, I wasn't ableattach the screenshots. Therefore I have send them to your mail account within two emails.
Rgds Arndt
-
Here you go
-
Here you go
-
And an additional info:
on the "load" page, I don't have any choice for a selection of the various options. Everything is grey and not selectable.
-
Hi,
yes, it is version 9.2.1!
I reinstalled FSCommander, and now I can save flights to P3D. But I cannot open them, because FS Commander seems to be unable to find the folder.
Kind regards
Arndt
-
Hello Volker,
the original path of P3D is: D:\Prepar3D, and this is set in line 2 of the path window.
The P3D flight plans are located in C:\Users\name\Documents\Prepar3D Files, and this is set in line 3 of the path window.
Nethertheless...
Regards
Arndt
-
Hello,
I have update P3D to version 1.4. After this operation, I had to make a new install of FSC9. But now I am getting a problem with the path of P3D files. Although I recorded it correctly, FSC9 always is complaining about an unspecified path. Therefore, I am not able to save new plans, and I cannot open already existing old plans.
Can you help me out?
Kind regards
Arndt
-
Above I was wrong, I wanted to say, that the right window does not work!
-
Hello Volker,
I see.
But unfortunately for me the left window does not work. If I press the Gate/Rwy/... button, no gates and runways are shown, but the map moves to the left (to the west)!
Regards
Arndt
-
Hello Volker,
I have to correct myself.
The window "Select parking and taxiways" in the command line is working. You can use it to specify the gate or parking in the departure airport. Great!
But the window "Waypoint / Rwy / Gate" in the flight planner facility is not working, al least in my configuration. With FSX, I was always using this window to specify gate and parking.
Is there anything I can do to fix it?
Kind regards
Arndt
FSC Database Manager cannot remember Sim (solved)
in (Former) FS Commander Support Forum
Posted
Nun habe ich herausbekommen, dass man den FSC-Icon doch an die Taskleiste anheften und damit FSC "als Administrator" öffnen kann. So bin ich vorgegangen:
FSC-Icon im Installationsordner mit rechter Maustaste anklicken, auf Eigenschaften gehen, hier auf Kompabilität gehen, dann "Einstellungen für alle Benutzer ändern" anklicken, gank unten bei "Programm als Administrator ausführen" Haken setzen und "übernehmen" anklicken, dann "ok".
Jetzt kann man den Icon an die Taskleite anheften. Wenn man ihn anklickt, wird FSC als Administrator geöffnet.