[FSUIPC6 can not be installed in C:\User\..\Document\]

Beware that if u have windows 10 there are 2 documents folders, i had it also in the past, where i have the ordinary Documents folder and one in users/name/documents.

installation of fsuipc was all the time in users/name/documents, so nothing registered in the sim.

it took a long time before i was aware of this issue.

 

ps like John said that OneDrive thing messed with al those folders

[FSUIPC won't load with SIM]

Yes sir John cannot be started and i dont have set FSUIPC as administrator. Strange he. Greetings.

 

ps i dont have modificated the batch file, maybe thast the culprit, im gonna do it now

[FSUIPC won't load with SIM]

Thanks John i put all te exe programs in the FSUIPC Command "programs" "run1" "ready"  etc so i only have to manually start fsuipc, thanks for the tip.

 

ps autostart with fsuipc dont work either its a sim issue i guess, i attached fsuipc.ini (last lines)

FSUIPC7.ini

[FSUIPC won't load with SIM]

Same here, even more, nothing loads from the exe.xml, have to start everything manually, the exe.xml i have deleted, reinstalled etc but still nothing, i will attach it , thank u for looking at it, greets.

EXE.xml

[Cannot determine which version of P3D to uninstall FSUIPC]

Thank u John the error was that it installed in another documents folder in windows 10, it was there all the time, now its in the right documents folder, thanks for u help.

[Cannot determine which version of P3D to uninstall FSUIPC]

Hello Pete and son, good evening, i have both P3D4 and P3D5 side by side installed. Fsuipc in P3D4 was installed in the root "modules" folder and in P3D5 its installed as an addon.xml in my documents/P3D5 addons. When i installed the new version i wanted to change the installation in P3D4 also as addon.xml in my documents/P3D4 addons but now i have problems. It only installed in P3D5 and not in P3D4 (no DLL's etc). I saw there was still an uninstaller in P3D4 modules folder but when i click that uninstaller it says "cannot determine which version of P3D to uninstall FSUIPC. so i uninstalled everything and reinstall but the uninstaller in "modules folder P3D4" stays there and thus i cannot install in P3D4 documents folder. When i run the installer (tried with v4 and v5 together and seperate) it says finished but nothing there in P3D4 documents folder. When i uninstall fsuipc via my programs and features the uninstaller is still visible in P3D4 root modules folder thus i think its a registry issue. How can i solve this? Thank u very much in advance. 

InstallFSUIPC6.log UninstallFSUIPC6.log

[[UPDATE] [v4.5 - Microsoft Flight Simulator] FlightControlReplay v4.5 for Microsoft Flight Simulator JUNE UPDATE 21 DISCUSSION]

On 11/5/2021 at 3:43 PM, FabioMerlo said:

Plese be sure you run FlightControlReplay in FlightControlReplayMSFS folder 😉

I use P3D5 do i open the MSFS exe Fabio?

[[UPDATE] [v4.5 - Microsoft Flight Simulator] FlightControlReplay v4.5 for Microsoft Flight Simulator JUNE UPDATE 21 DISCUSSION]

Since the AutumnUpdate my FCR always CTD when i go in options, is this known?

[sim stops responding after 7 hours]

Again after 6 hours in flight lost simconnect, i wil paste the last lines of the log because i didnt find the word "error"

ps i have both p3dv4 and p3dv5 side by side installed. Fsuipc 5 for p3dv4, Fsuipc 6 for p3dv5 if this matters?

the last lines shows this,

< 23806.97224 [130] Event: 23
< 23806.97229 [131] Event: 6
< 23806.97231 [133] Event: 1
< 23806.97232 [134] Event: 1
< 23806.97234 [135] Event: 1
< 23806.97235 [517] Event: 2
< 23806.97237 [140] Event: 1
< 23806.97238 [141] Event: 1
< 23806.97239 [142] Event: 1
< 23806.97241 [143] Event: 1
< 23806.97242 [144] Event: 1
< 23806.97243 [521] Event: 2
< 23806.97245 [523] Event: 4
< 23806.97247 [192] Event: 2
< 23806.97248 [514] Event: 6
< 23806.97250 [139] Event: -4
< 23806.97252 [132] Event: 9
< 23806.97253 [516] Event: 2
< 23806.97254 [524] Event: 2
< 23806.97256 [539] Event: 3
< 23806.97257 [146] Event: 2
< 23806.97259 [194] Event: 2
< 23806.97261 [129] Event: 1
< 23806.97263 [130] Event: 21
< 23806.97265 [525] Event: 0
< 23806.97267 [514] Event: 7
< 23806.97269 [136] Event: -2
< 23806.97271 [138] Event: -7
< 23806.97272 [139] Event: -2
< 23806.97274 [524] Event: 0
< 23806.97276 [193] Event: 333
< 23806.97278 [513] Event: 85
< 23813.95635 [523] ObjectAddRemove: EventID=25  Type=15  ObjectID=15302
< 23813.95640 [515] ObjectAddRemove: EventID=14  Type=15  ObjectID=15302
< 23813.95643 [513] ObjectAddRemove: EventID=97  Type=15  ObjectID=15302
< 23813.95656 [523] ObjectAddRemove: EventID=25  Type=15  ObjectID=15303
< 23813.95659 [515] ObjectAddRemove: EventID=14  Type=15  ObjectID=15303
< 23813.95661 [513] ObjectAddRemove: EventID=97  Type=15  ObjectID=15303
< 23813.95706 [523] ObjectAddRemove: EventID=25  Type=15  ObjectID=15300
< 23813.95709 [515] ObjectAddRemove: EventID=14  Type=15  ObjectID=15300
< 23813.95711 [513] ObjectAddRemove: EventID=97  Type=15  ObjectID=15300
< 23813.95716 [523] ObjectAddRemove: EventID=25  Type=15  ObjectID=15301
< 23813.95718 [515] ObjectAddRemove: EventID=14  Type=15  ObjectID=15301
< 23813.95720 [513] ObjectAddRemove: EventID=97  Type=15  ObjectID=15301
< 23813.95727 [523] ObjectAddRemove: EventID=25  Type=15  ObjectID=15304
< 23813.95729 [515] ObjectAddRemove: EventID=14  Type=15  ObjectID=15304
< 23813.95757 [513] ObjectAddRemove: EventID=97  Type=15  ObjectID=15304
< 23813.95771 [523] ObjectAddRemove: EventID=25  Type=15  ObjectID=15305
< 23813.95773 [515] ObjectAddRemove: EventID=14  Type=15  ObjectID=15305
< 23813.95775 [513] ObjectAddRemove: EventID=97  Type=15  ObjectID=15305
< 23813.95781 [523] ObjectAddRemove: EventID=25  Type=15  ObjectID=15306
< 23813.95783 [515] ObjectAddRemove: EventID=14  Type=15  ObjectID=15306
< 23813.95785 [513] ObjectAddRemove: EventID=97  Type=15  ObjectID=15306
< 23813.95818 [523] ObjectAddRemove: EventID=25  Type=15  ObjectID=15307
< 23813.95820 [515] ObjectAddRemove: EventID=14  Type=15  ObjectID=15307
< 23813.95822 [513] ObjectAddRemove: EventID=97  Type=15  ObjectID=15307
< 23813.95861 [523] ObjectAddRemove: EventID=25  Type=15  ObjectID=15308
< 23813.95863 [515] ObjectAddRemove: EventID=14  Type=15  ObjectID=15308
< 23813.95865 [513] ObjectAddRemove: EventID=97  Type=15  ObjectID=15308

 

in the Fsuipc log was nothing to find either

[sim stops responding after 7 hours]

Here u go sir John, do i increase the max clients in the fsuipc.ini?

FSUIPC6.ini

[sim stops responding after 7 hours]

Hello sir John and Pete, the simconnect lost problem is back in P3D5.1 after 6 hours in flight, i try to replicate it now with simconnect log enabled. The file become very large (3gb atm), can u see or conclude something already if i post the log file or do i wait few hours more untill vpilot and my controls input etc dont responds anymore ?Thanks in advance.

 

ps how do i post it if im only allowed max 4.88mb upload?

[cannot delete autosaves from maddog x]

ok thats why its not deleting thats a pitty, thank u for the answer sir John

[cannot delete autosaves from maddog x]

Hello sir Pete or John, i cannot delete the autosaves from the maddog x in the folder, it now grows and grows and i have eveerything setup correctly, i add the ini file in attachement , can u have a look, its the line "alsomanage35", thank you.

FSUIPC5.ini

[sim stops responding after 7 hours]

9 hours ago, John Dowson said:

Which products did you update? It may help others that are also affected by this issue.

John

Hy John, i updated fsuipc (was older version), rex skyforce for p3dv5 (suspected), installed the simconnects redists from p3d5, active sky also updated, gsx update and pmdg did also a micro-update

sincerely

[sim stops responding after 7 hours]

a ok thank u sir John, the simconnect issue seams to be solved by updating some products, thanks very much for your time and reply, greetings

[sim stops responding after 7 hours]

Hello mr Dowson, i tried to logging but  it gives no output, can u check my simconnect.ini file that i send in attachement, i used the same that was in my doucuments p3dv4 files folder,thanks.

SimConnect.ini

[sim stops responding after 7 hours]

14 hours ago, John Dowson said:

There is a known issue in the SimConnect SDK since FSX that affects P3D (all versions) and also MSFS. It occurs when the number of SimConnect clients is exceeded, and tends to happen after long flights when using several simconnect clients (as they often close the connection and re-connect when the connection stalls).
I haven't got time to dig out the references now, but there are various posts in this forum where I have explained the issue, given references and also how to improve (by increasing the max number of allowed SimConnect clients in a SimConnect config file).

John

Strange that in p3d4 which i still use, this issue not occurs, im flying very long legs with no problem, only p3d5 is affected.

 

Thanks sir John, happy days to u, greetings

 

 

[sim stops responding after 7 hours]

I also had this issue in all versions of p3dv5 since the beginning and not using Rex Skyforce anymore seems to stop the simconnect loss after 6,7, .. hours in flight, will test more. Can anyone confirm?

[fslabs autosave files not deleted]

it works now, after restart pc and the fxml. method thanks all

[fslabs autosave files not deleted]

thank u sir i will try that tomorrow with the fxml. method

 

 

 

 

[fslabs autosave files not deleted]

Ok thank u sir Pete will do

[fslabs autosave files not deleted]

it doesnt work my documents folder in panelstate is full of saved flights

[fslabs autosave files not deleted]

Hy sir thanks for answering, so,u mean only before the .sav the FLT and the rest without? Will try tomorrow but i doubt if it will work. Will let u know. Thanks

[fslabs autosave files not deleted]

Hello sir Pete , in my documents folder the fslabs a319 and a320 files are not deleted. 

this is how fsuipc.ini looks like under autosave section:

[AutoSave]
Next=3
Interval=300
Files=3
SaveOnGround=Yes
AutoSaveEnabled=Yes
1=Wed 173936
2=Wed 174435
3=Wed 173436
AlsoManage1="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A319\PanelState\*.sav"
AlsoManage2="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A319\PanelState\*.xml"
AlsoManage3="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A319\PanelState\*.FM1"
AlsoManage4="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A319\PanelState\*.FM2"
AlsoManage5="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A320\PanelState\*.sav"
AlsoManage6="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A320\PanelState\*.xml"
AlsoManage7="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A320\PanelState\*.FM1"
AlsoManage8="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A320\PanelState\*.FM2"

ps i also tried 

[AutoSave]
Next=3
Interval=300
Files=3
SaveOnGround=Yes
AutoSaveEnabled=Yes
1=Wed 173936
2=Wed 174435
3=Wed 173436
AlsoManage1="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A319\PanelState\*.FLT.sav"
AlsoManage2="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A319\PanelState\*.FLT.xml"
AlsoManage3="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A319\PanelState\*.FLT.FM1"
AlsoManage4="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A319\PanelState\*.FLT.FM2"
AlsoManage5="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A320\PanelState\*.FLT.sav"
AlsoManage6="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A320\PanelState\*.FLT.xml"
AlsoManage7="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A320\PanelState\*.FLT.FM1"
AlsoManage8="C:\Users\Jurgen\Documents\Prepar3D v4 Add-ons\FSLabs\A320\PanelState\*.FLT.FM2"

note the ".FLT" does it need FLT before or not? nothing gets erased and my c drive is sometimes 5gb bigger and ssd from 500gb is almost full

thanks u in advance sir Peter.

 

 

[Windows 10 Autosave]

Thank you Pete i also use p3d 2.5 and there is everything ok, i try the above solution thank you.