Jump to content
The simFlight Network Forums

johnl

Members
 View Profile  See their activity

  • Posts

    17

  • Joined

  • Last visited

 Content Type 

Posts posted by johnl

  2. FSX says FSUIPC is causing error....

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Pete

    turns out that hte problem was the disc was dying! So its not FSUIPc at all :-)

    Now my problem is, I am doing a reinstall, and I just downloaded V4.3 but does not recognise my V4 code that I bought....? It should, right? I bought a FSUIPC V4 registration from SimMarket and I tried cutting and pasting the code from there and it still says its invalid....

    Help!

    thanks :-)

    JL

  3. FSX says FSUIPC is causing error....

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi All

    suddenly....for no obvious reason....despite having run previously just fine....FSX tells me "An add-on utility is causing a problem with FSX" or words to that effect. The utility it names is FSUIPC. (I have a registered version 4.20) From memory it said "Do you want to run this program?" and I said YES of course as it works fine. Except now it does not. I get the splash screen and then "Fatal Error".... ie I cannot start FSX!

    Any ideas???

    John L

  5. FSUIPC KEY FAILS :-(

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi Peter!

    I have been a registered user of FSUIPC for some time. And thanks for your help with various questions!

    I am slowly making the swap to FSX and I just installed FSUPIPC (V4.09) but my old key does not work. I cut and pasted from the registration email I received years ago so it should be OK....

    Any ideas? I have a registered version running FS9.1....

    Thanks

    John L

  6. What *exactly* does E1 and E2 do? And *when* does it do it?

    in FSUIPC Support Pete Dowson Modules

    Posted

    After engine 1 is started and you hit E2 to control engine 2, fuel flow is at 0, however, when you move the lever from its E1 position to the cutoff position it takes the value set by the E1 position.

    So...if one hits E2 and does NOT move the lever then the fuel to engine 2 remains at zero?

    ne way I think to get around this is after you start Engine 1, press E2 then when you go to move the lever, move it very quickly to the cutoff position and it does not seem to grab the E1 value.

    I can try this...but I think the authors of this plane wrote it so that *any* fuel injected into the engine prior to 12%N1 wouold cause the hot start fault.

    I even tried not switching to E2 until the 2nd engine reached 12%N1 but even that failed!

    If you want to monitor fuel flow to E2 use FSUIPCs logging function using offset 2120, putting a check inth e display to FStitle bar so that you can see the value there.

    I should try this!

    does your aircraft have other fuel valves so that you can shut the fuel to engine 2 then open the valve when you are ready to start?

    Good idea, butno it does not have a separate fuel valve :-/

    Thanks for the help!

    JL

    PS Ilove the PMDG B1900 :-)

  7. What *exactly* does E1 and E2 do? And *when* does it do it?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi

    this is a follow-up to my post about trying to change axis

    assignments with a button. Seems this is not possible. So I have another solution....which doesn't work, so I guess its *not* a solution...but if I knew *why* it did not work, I might be able to make progress....

    Here is a post of mine from the Aeroworx KingAir page. To start this plane you must NOT introduce ANY fuel into the engine until 12%N1. I have a CH yoke and only one axis for the fuel condition levers. So I was using E1 and E2. That did notg work....see below.

    My question is: when you set, say, fuel at 0% on engines 1 and 2, hit E1 and adjust the fuel to E1....then hit E2 to change to engine 2...what is the fuel value in engine 2 *immediately* you hit E2? HOw is the transfer done?

    I tried two posisbilities in the post below

    1) it *instantly* gives you the value on engine 1

    2) it maintains the value it had until you move the axis

    Neither (!) seems to be the case!

    Does anyone know???

    Help!

    :-)

    JL

    -------------------------

    Hi All

    firstly, congrats to all involved with this wonderful plane! Its a gem.

    My only frustration has been trying to start the thing with he CH flight

    yoke. I finally found a solution in a post from Kurt Yoda:

    "Never try to use a single controller lever (such as the CH Yoke) for

    the fuel conditioners. Disable your condition lever, and start both

    engines with the mouse, then move the condition lever to mid-range

    before re-enabling it."

    Of course, this works fine! Thanks Kurt! But I was thinking....and experimenting....

    In principle, of course, we can use E1, E2 and E12 to start the engines properly

    and if FS behaved we should be OK.

    I tried the following (as have others, as I see in the forum)

    E1

    Start 1

    At 12% Move cond lever to low idle

    This gives a fine start for engine 1

    Now the question becomes - what does FS do when you hit E2?

    Does it instantly take the value of the cond lever for E2 to be that of

    E1? Or does it start at its current value (0%) and only change when

    you move the lever?

    If it was the latter then repeating the procedure above would work.

    But it does not so I concluded that as soon as I hit E2 FS was sending

    fuel to the engine even though it still reads CUTOFF.

    So I thought I had a solution!!! Proceed as before

    Fuel Cutoff (both!)

    E1

    at 12% move to low idle

    Engine 1 is fine

    Now.....leave lever as is and START engine 2

    When second engine gets to 12% hit E2

    I thought this would introduce fuel to engine 2 at the correct time.

    But alas it hotstarts cry angry

    Any ideas why this fails?

    I am reasonably happy starting with the mouse but using the levers is nice.

    Its a pity you cannot use hotkeys in FSUIPC to adjust the axes....if you could

    then a key to make two levers the fuel cond levers for engines 1 and 2

    would be ideal..then a key to take them back to their usual setting...and

    all would be fine.

    I think fate is trying to make me buy a throttle quadrant!

    But...does anyone know why my proposed solution did not work?

    Thanks!

    John L

  8. Buttons to change axis assignments?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Bud

    thanks..I tried that...to no avail :-(

    I hit E1 and start engine 1. Move the condition lever to 20% or so. All is

    fine and dandy at this stage....

    Then I hit E2. Now....does FS take the value of the fuel lever on engine 2 to be zero (as it was before hitting E2) or the current value on the lever, which is now governing engine2)? I don't know...but I know that whatever it does, it introduces fuel into the engine, and that does damage...

    I even tried not switching from E1 to E2 until the starter had the appropriate value of N1 on the second engine...so that however FS worked, I should not be adding fuel to engine 2 until I hit E2. But that did not work either.

    Hence my thoughts about *temporarily* using two separate levers...

    The manufacturers at Aeroworx receommend NOT using the yoke at startup, and using the mouse to control the levers. Indeed, that works :-)

    But its nice to use the levers....

    Sigh....

    Thanks for your suggestion....but it doesn't work :-/

    JL

  9. Buttons to change axis assignments?

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi

    I am flying the lovely Aeroworx King Air, and I am using a CH flight yoke. The King Air is a twin engine aircraft and I use the three throttle levers for the usual throttle, pitch and fuel condition levelrs. The left and right engines are usually controlled simultaneously by the one lever, of course. In principle one can swap from controlling both engines to just engine 1 by using keyboard command "E 1"; to control only engine 2 we would use "E 2" and return to both using "E 1 2". (I know you know this...)

    The problem is that this aircraft will damage the engines during a start if you introduce fuel too early, and it appears not possible to use the E+1 and E+2 switching without causing serious problems to the engines during start.

    I can get arouns this y using the mouse to move the condition levers separately.

    But an *elegant* solution would be

    1 Program a button to make the middle lever become condition

    lever for engine 1 and the rigt lever the cond lever for engine 2

    2 NOw there are two fully independent axes and I can use them

    to start the engines realistically

    3 Once started, program another button to return the middle

    lever 2 to be the pitch (for engines 1 & 2) and the right

    lever to be the cond lever (for engines 1 & 2)

    So....to all you FSUIPC experts.....is this possible?????

    Many thanks!

    John L

  10. Trim adjusting itself!

    in FSUIPC Support Pete Dowson Modules

    Posted

    OK....I tracked the problem down to a faulty button in my flight yoke! It was sending a "trim up" command every second or so :-/ I turned off that button and all is fine. Except that now I don't have a trim button :-(

    Anyway....its fixed.

    Thought I would pass this one because I have asked many people over the last year if they kenw how this could happen....now we do :-)

    JL

  11. Trim adjusting itself!

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi

    can anyone help me with this?

    For some time now I have noticed that, seemingly intermittently, my aircraft (all of them, as far as I can tell) sometimes adjust their trim by themselves. This is while on the ground....no autopilot...

    I am not touching the trim buttons...and I can watch the trim get further and further "nose up" ! It adjusts it every few seconds or so. Up a notch. Then a bit later, up another.

    If I have notnoticed this, it makes takeoff rather spectacular :-) But it is now causing me greast distress as when I try to fly the heavies, the autopilot disengages straight away as soon as the trim adjusts itself :-(

    Any ideas?

    Can FSUIPC help me????

    thanks! Its driving me to distraciton!!!

    John L

  13. No mixture control...

    in FSUIPC Support Pete Dowson Modules

    Posted

    Pete

    many thanks for your help and your time (and for a great product!)

    But I still have troubles. I checked the mixture axis in fsuipc and its not mapped to anything, no filters, and I hit reset. I get no values in the IN and OUT box at all, although I do for the other axes. I will upload my fsuipc.ini for you to look at. I alsoc checked the four separate, mixtures...no input to those either. I turned on logging and ran each of mixture, prop and throttle up and down twice. I see no entry for mixture...

    Indeed, if I remove the section [joystick calibration] from the .ini file then it all works.

    Any ideas??? I would rather use fsuipc and its features than disable the joystick part...

    John L

    FSUIPC.ini

    [General]

    History=UOV41NCK5FVE9LOGR3UEG

    TCASid=Flight

    TCASrange=40

    TrafficScanPerFrame=10

    AxisCalibration=No

    CentredDialogue=No

    ClearWeatherDynamics=Yes

    OwnWeatherChanges=No

    WeatherReadInterval=4

    MoveBGLvariables=Yes

    MainMenu=&Modules

    SubMenu=&FSUIPC ...

    WindSmoothing=No

    WhiteMessages=No

    ThrottleSyncAll=No

    GenerateCirrus=No

    WindShearSharp=No

    UpperWindGusts=Yes

    ExtendMetarMaxVis=Yes

    PatchSimApAlt=No

    AutoClearWeather=Yes

    ExtendTopWind=No

    WindSmoothness=5

    SmoothPressure=No

    PressureSmoothness=5

    SmoothVisibility=No

    VisibilitySmoothness=2

    MaxSurfaceWind=0

    WindLimitLevel=200

    WindDiscardLevel=400

    WindAjustAltitude=No

    WindAjustAltitudeBy=2000

    MinimumVisibility=0

    MaximumVisibilityFewClouds=0

    MaximumVisibility=0

    MaximumVisibilityOvercast=0

    MaximumVisibilityRainy=0

    OneCloudLayer=No

    ThinClouds=No

    ThinThunderClouds=No

    CloudThinness=1000

    ThunderCloudThinness=10000

    CloudTurbulence=Yes

    CloudIcing=No

    WindTurbulence=Yes

    SuppressAllGusts=No

    ExternalOptionControl=Yes

    AutoTuneADF=No

    KeepFS98CloudCover=No

    ShowPMcontrols=No

    MagicBattery=No

    RudderSpikeRemoval=No

    ElevatorSpikeRemoval=No

    AileronSpikeRemoval=No

    ReversedElevatorTrim=No

    TrapUserInterrupt=Yes

    NavFreq50KHz=No

    ClockSync=No

    SmoothIAS=Yes

    SetVisUpperAlt=No

    VisUpperAltLimit=6000

    MaxIce=-4

    SuppressCloudTurbulence=No

    SuppressWindTurbulence=No

    SpoilerIncrement=512

    FixWindows=No

    FixControlAccel=Yes

    DisconnTrimForAP=No

    WindSmoothingDelay=0

    WindSmoothAirborneOnly=No

    VisSmoothingDelay=0

    VisSmoothAirborneOnly=No

    ShortAircraftNameOk=No

    ZeroElevForAPAlt=No

    TimeForSelect=4

    AutoTaxiWind=No

    GraduatedVisibility=No

    LowerVisAltitude=0

    UpperVisAltitude=25000

    UpperVisibility=6000

    [JoystickCalibration]

    FlapsSetControl=0

    ReverserControl=66292

    MaxThrottleForReverser=0

    AileronTrimControl=0

    RudderTrimControl=0

    CowlFlaps1Control=0

    CowlFlaps2Control=0

    CowlFlaps3Control=0

    CowlFlaps4Control=0

    SlopeAileron=0

    SlopeElevator=0

    SlopeRudder=0

    Aileron=-16380,-512,-217,10000

    Elevator=-16380,512,3897,16380

    Rudder=-16380,0,512,16380

    Throttle=-16380,16380

    LeftBrake=-16380,16380

    RightBrake=-16380,16380

    Throttle1=-16380,-512,512,16380

    Throttle2=-16380,-512,512,16380

    Throttle3=-16380,-512,512,16380

    Throttle4=-16380,-512,512,16380

    PropPitch1=0,0,512,16380

    PropPitch2=0,0,512,16380

    ElevatorTrim=-16380,-512,512,16380

    Spoilers=-16380,16380

    Flaps=0,16380

    Reverser=-16380,16380

    Aileron Trim=-16380,-512,512,16380

    Rudder Trim=-16380,-512,512,16380

    CowlFlaps1=0,16380

    CowlFlaps3=0,16380

    LOG

    ********* FSUIPC, Version 3.45 by Pete Dowson *********

    Running inside FS2004(original release)

    User Name="John Lattanzio"

    User Addr="john.lattanzio@sci.monash.edu.au"

    FSUIPC Key is provided

    WIDEFS not user registered, or expired

    [Continuation log requested by user]

    Module base=61000000

    ClassOptions: UIPCMAIN=FF7F, FS98MAIN=FF7F, FS2KMAIN=FF5E

    WeatherOptions(Orig)=4014B627[4014B627]

    InitDelay: 0 seconds

    WeatherReadInterval=4

    LogOptions=00000001

    131391 System time = 12:43:41, FS2004 time = 10:15:19 (17:15Z)

    131391 WeatherOptions set, now 4014B627 (timer=0)

    132063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    132109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET

    132172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET

    132219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET

    132266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    132328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET

    132375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    132438 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    132484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    132547 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    132594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    132641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    133016 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    133063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET

    133109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET

    133172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET

    133219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET

    133266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    133328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    133375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    133422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    133484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    133531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    133594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1453 (0xfffffa53) AXIS_ELEVATOR_SET

    133641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET

    133688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET

    133750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET

    133797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    133844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET

    133906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    133953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    134000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    134063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    134109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    134156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    134703 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    134750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET

    134797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET

    134859 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET

    134906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET

    134953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    135016 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1457 (0xfffffa4f) AXIS_ELEVATOR_SET

    135063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET

    135109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET

    135172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1470 (0xfffffa42) AXIS_ELEVATOR_SET

    135219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1494 (0xfffffa2a) AXIS_ELEVATOR_SET

    135266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1473 (0xfffffa3f) AXIS_ELEVATOR_SET

    135328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1457 (0xfffffa4f) AXIS_ELEVATOR_SET

    135375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET

    135422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1477 (0xfffffa3b) AXIS_ELEVATOR_SET

    135484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1460 (0xfffffa4c) AXIS_ELEVATOR_SET

    135531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1448 (0xfffffa58) AXIS_ELEVATOR_SET

    135594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1438 (0xfffffa62) AXIS_ELEVATOR_SET

    135641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1431 (0xfffffa69) AXIS_ELEVATOR_SET

    135688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1426 (0xfffffa6e) AXIS_ELEVATOR_SET

    135750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1422 (0xfffffa72) AXIS_ELEVATOR_SET

    135797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    135844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1418 (0xfffffa76) AXIS_ELEVATOR_SET

    135906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    135953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    136000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1453 (0xfffffa53) AXIS_ELEVATOR_SET

    136063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET

    136109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET

    136156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET

    136219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    136266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET

    136328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    136375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    136422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    136484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    136531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    136594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    137531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    137578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET

    137641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET

    137688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET

    137734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    137797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET

    137844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    137891 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    137953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    138000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    138063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    138125 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    138906 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -13505 (0xffffcb3f) AXIS_PROPELLER_SET

    138953 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -9025 (0xffffdcbf) AXIS_PROPELLER_SET

    139016 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -4801 (0xffffed3f) AXIS_PROPELLER_SET

    139063 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 0 (0x00000000) AXIS_PROPELLER_SET

    139109 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 3776 (0x00000ec0) AXIS_PROPELLER_SET

    139172 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 7488 (0x00001d40) AXIS_PROPELLER_SET

    139219 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 11072 (0x00002b40) AXIS_PROPELLER_SET

    139266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    139266 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 14912 (0x00003a40) AXIS_PROPELLER_SET

    139328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET

    139328 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 16192 (0x00003f40) AXIS_PROPELLER_SET

    139375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET

    139438 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET

    139484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET

    139531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    139594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    139641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    139703 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    139750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    139797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    139844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET

    139906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET

    139953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET

    140016 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    140063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET

    140109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1458 (0xfffffa4e) AXIS_ELEVATOR_SET

    140109 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 14016 (0x000036c0) AXIS_PROPELLER_SET

    140172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1447 (0xfffffa59) AXIS_ELEVATOR_SET

    140172 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 10816 (0x00002a40) AXIS_PROPELLER_SET

    140219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1438 (0xfffffa62) AXIS_ELEVATOR_SET

    140219 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 8128 (0x00001fc0) AXIS_PROPELLER_SET

    140266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1431 (0xfffffa69) AXIS_ELEVATOR_SET

    140266 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 5568 (0x000015c0) AXIS_PROPELLER_SET

    140328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1426 (0xfffffa6e) AXIS_ELEVATOR_SET

    140328 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 3008 (0x00000bc0) AXIS_PROPELLER_SET

    140375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1422 (0xfffffa72) AXIS_ELEVATOR_SET

    140375 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 192 (0x000000c0) AXIS_PROPELLER_SET

    140422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    140422 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -1985 (0xfffff83f) AXIS_PROPELLER_SET

    140484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1418 (0xfffffa76) AXIS_ELEVATOR_SET

    140484 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -3777 (0xfffff13f) AXIS_PROPELLER_SET

    140531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    140531 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -5825 (0xffffe93f) AXIS_PROPELLER_SET

    140594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    140594 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -8257 (0xffffdfbf) AXIS_PROPELLER_SET

    140641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    140641 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -11201 (0xffffd43f) AXIS_PROPELLER_SET

    140688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    140688 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -13505 (0xffffcb3f) AXIS_PROPELLER_SET

    140750 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -15041 (0xffffc53f) AXIS_PROPELLER_SET

    140797 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -16193 (0xffffc0bf) AXIS_PROPELLER_SET

    141109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    141156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET

    141219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1474 (0xfffffa3e) AXIS_ELEVATOR_SET

    141266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1458 (0xfffffa4e) AXIS_ELEVATOR_SET

    141328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1447 (0xfffffa59) AXIS_ELEVATOR_SET

    141375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET

    141422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1430 (0xfffffa6a) AXIS_ELEVATOR_SET

    141484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1425 (0xfffffa6f) AXIS_ELEVATOR_SET

    141531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET

    141594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    141594 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15045 (0xffffc53b) AXIS_THROTTLE_SET

    141641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    141641 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -11076 (0xffffd4bc) AXIS_THROTTLE_SET

    141688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    141688 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -8388 (0xffffdf3c) AXIS_THROTTLE_SET

    141750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    141750 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -5187 (0xffffebbd) AXIS_THROTTLE_SET

    141797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    141797 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -2370 (0xfffff6be) AXIS_THROTTLE_SET

    141844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    141844 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 320 (0x00000140) AXIS_THROTTLE_SET

    141906 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 2496 (0x000009c0) AXIS_THROTTLE_SET

    141953 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 3904 (0x00000f40) AXIS_THROTTLE_SET

    142000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    142000 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 5953 (0x00001741) AXIS_THROTTLE_SET

    142063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET

    142063 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 7489 (0x00001d41) AXIS_THROTTLE_SET

    142109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET

    142109 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 9282 (0x00002442) AXIS_THROTTLE_SET

    142156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET

    142156 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 10690 (0x000029c2) AXIS_THROTTLE_SET

    142219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET

    142219 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 12098 (0x00002f42) AXIS_THROTTLE_SET

    142266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    142266 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 13251 (0x000033c3) AXIS_THROTTLE_SET

    142328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    142328 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 14787 (0x000039c3) AXIS_THROTTLE_SET

    142375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    142375 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 16195 (0x00003f43) AXIS_THROTTLE_SET

    142438 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    142484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    142547 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    142594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    143234 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    143297 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET

    143344 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1475 (0xfffffa3d) AXIS_ELEVATOR_SET

    143344 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 16067 (0x00003ec3) AXIS_THROTTLE_SET

    143391 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1458 (0xfffffa4e) AXIS_ELEVATOR_SET

    143391 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 14659 (0x00003943) AXIS_THROTTLE_SET

    143453 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET

    143453 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 12995 (0x000032c3) AXIS_THROTTLE_SET

    143500 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET

    143500 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 10306 (0x00002842) AXIS_THROTTLE_SET

    143563 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1473 (0xfffffa3f) AXIS_ELEVATOR_SET

    143563 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 6593 (0x000019c1) AXIS_THROTTLE_SET

    143609 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1457 (0xfffffa4f) AXIS_ELEVATOR_SET

    143609 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 2496 (0x000009c0) AXIS_THROTTLE_SET

    143672 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET

    143672 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 0 (0x00000000) AXIS_THROTTLE_SET

    143719 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET

    143719 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -3010 (0xfffff43e) AXIS_THROTTLE_SET

    143766 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1430 (0xfffffa6a) AXIS_ELEVATOR_SET

    143766 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -6211 (0xffffe7bd) AXIS_THROTTLE_SET

    143828 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1425 (0xfffffa6f) AXIS_ELEVATOR_SET

    143828 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -9028 (0xffffdcbc) AXIS_THROTTLE_SET

    143875 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET

    143875 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -12228 (0xffffd03c) AXIS_THROTTLE_SET

    143938 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    143938 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -14789 (0xffffc63b) AXIS_THROTTLE_SET

    143984 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    143984 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16197 (0xffffc0bb) AXIS_THROTTLE_SET

    144031 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    144094 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    144141 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1453 (0xfffffa53) AXIS_ELEVATOR_SET

    144203 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET

    144250 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET

    144297 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET

    144359 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    144406 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    144469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1458 (0xfffffa4e) AXIS_ELEVATOR_SET

    144516 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1487 (0xfffffa31) AXIS_ELEVATOR_SET

    144578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1467 (0xfffffa45) AXIS_ELEVATOR_SET

    144625 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1453 (0xfffffa53) AXIS_ELEVATOR_SET

    144672 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET

    144734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET

    144781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET

    144844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    144891 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET

    144938 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    145000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    145047 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    145094 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    145156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    145203 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    148422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    148469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET

    148531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET

    148578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1427 (0xfffffa6d) AXIS_ELEVATOR_SET

    148625 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET

    148688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    148734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    148734 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -15041 (0xffffc53f) AXIS_PROPELLER_SET

    148781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    148781 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -10817 (0xffffd5bf) AXIS_PROPELLER_SET

    148844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    148844 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -6209 (0xffffe7bf) AXIS_PROPELLER_SET

    148891 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    148891 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -705 (0xfffffd3f) AXIS_PROPELLER_SET

    148953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    148953 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 5056 (0x000013c0) AXIS_PROPELLER_SET

    149000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    149000 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 8768 (0x00002240) AXIS_PROPELLER_SET

    149047 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 13504 (0x000034c0) AXIS_PROPELLER_SET

    149109 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 16192 (0x00003f40) AXIS_PROPELLER_SET

    149203 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    149266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET

    149313 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET

    149359 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET

    149422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    149469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    149531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    149578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    149641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    149688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    149688 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 15936 (0x00003e40) AXIS_PROPELLER_SET

    149734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    149734 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 12992 (0x000032c0) AXIS_PROPELLER_SET

    149797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    149797 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 9536 (0x00002540) AXIS_PROPELLER_SET

    149844 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 6848 (0x00001ac0) AXIS_PROPELLER_SET

    149891 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 3392 (0x00000d40) AXIS_PROPELLER_SET

    149953 *** AXIS: Cntrl= 66291 (0x000102f3), Param= 192 (0x000000c0) AXIS_PROPELLER_SET

    150000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    150000 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -3393 (0xfffff2bf) AXIS_PROPELLER_SET

    150047 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1441 (0xfffffa5f) AXIS_ELEVATOR_SET

    150047 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -6977 (0xffffe4bf) AXIS_PROPELLER_SET

    150109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1433 (0xfffffa67) AXIS_ELEVATOR_SET

    150109 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -10177 (0xffffd83f) AXIS_PROPELLER_SET

    150156 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1467 (0xfffffa45) AXIS_ELEVATOR_SET

    150156 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -13377 (0xffffcbbf) AXIS_PROPELLER_SET

    150203 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1492 (0xfffffa2c) AXIS_ELEVATOR_SET

    150203 *** AXIS: Cntrl= 66291 (0x000102f3), Param= -16193 (0xffffc0bf) AXIS_PROPELLER_SET

    150266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1472 (0xfffffa40) AXIS_ELEVATOR_SET

    150313 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1456 (0xfffffa50) AXIS_ELEVATOR_SET

    150359 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1445 (0xfffffa5b) AXIS_ELEVATOR_SET

    150422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1436 (0xfffffa64) AXIS_ELEVATOR_SET

    150469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET

    150531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    150578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1421 (0xfffffa73) AXIS_ELEVATOR_SET

    150625 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    150688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    150734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    150781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    150844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    150891 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    150953 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -15429 (0xffffc3bb) AXIS_THROTTLE_SET

    151000 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -12485 (0xffffcf3b) AXIS_THROTTLE_SET

    151047 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -8260 (0xffffdfbc) AXIS_THROTTLE_SET

    151109 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -5059 (0xffffec3d) AXIS_THROTTLE_SET

    151156 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -1218 (0xfffffb3e) AXIS_THROTTLE_SET

    151203 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 1472 (0x000005c0) AXIS_THROTTLE_SET

    151266 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 3648 (0x00000e40) AXIS_THROTTLE_SET

    151313 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    151313 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 6593 (0x000019c1) AXIS_THROTTLE_SET

    151375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET

    151375 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 9538 (0x00002542) AXIS_THROTTLE_SET

    151422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET

    151422 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 11586 (0x00002d42) AXIS_THROTTLE_SET

    151484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET

    151484 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 13507 (0x000034c3) AXIS_THROTTLE_SET

    151531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET

    151531 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 15171 (0x00003b43) AXIS_THROTTLE_SET

    151578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    151578 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 16195 (0x00003f43) AXIS_THROTTLE_SET

    151641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1457 (0xfffffa4f) AXIS_ELEVATOR_SET

    151688 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1446 (0xfffffa5a) AXIS_ELEVATOR_SET

    151750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1437 (0xfffffa63) AXIS_ELEVATOR_SET

    151797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1430 (0xfffffa6a) AXIS_ELEVATOR_SET

    151844 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1425 (0xfffffa6f) AXIS_ELEVATOR_SET

    151906 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1460 (0xfffffa4c) AXIS_ELEVATOR_SET

    151953 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1448 (0xfffffa58) AXIS_ELEVATOR_SET

    152000 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1479 (0xfffffa39) AXIS_ELEVATOR_SET

    152063 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1461 (0xfffffa4b) AXIS_ELEVATOR_SET

    152109 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1449 (0xfffffa57) AXIS_ELEVATOR_SET

    152172 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1439 (0xfffffa61) AXIS_ELEVATOR_SET

    152219 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1432 (0xfffffa68) AXIS_ELEVATOR_SET

    152266 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1466 (0xfffffa46) AXIS_ELEVATOR_SET

    152266 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 15939 (0x00003e43) AXIS_THROTTLE_SET

    152328 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    152328 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 13763 (0x000035c3) AXIS_THROTTLE_SET

    152375 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1483 (0xfffffa35) AXIS_ELEVATOR_SET

    152375 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 11714 (0x00002dc2) AXIS_THROTTLE_SET

    152438 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1464 (0xfffffa48) AXIS_ELEVATOR_SET

    152438 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 9154 (0x000023c2) AXIS_THROTTLE_SET

    152484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1491 (0xfffffa2d) AXIS_ELEVATOR_SET

    152484 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 5825 (0x000016c1) AXIS_THROTTLE_SET

    152547 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1470 (0xfffffa42) AXIS_ELEVATOR_SET

    152547 *** AXIS: Cntrl= 65765 (0x000100e5), Param= 1856 (0x00000740) AXIS_THROTTLE_SET

    152594 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1454 (0xfffffa52) AXIS_ELEVATOR_SET

    152594 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -1730 (0xfffff93e) AXIS_THROTTLE_SET

    152641 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1444 (0xfffffa5c) AXIS_ELEVATOR_SET

    152641 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -5571 (0xffffea3d) AXIS_THROTTLE_SET

    152703 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET

    152703 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -8900 (0xffffdd3c) AXIS_THROTTLE_SET

    152750 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET

    152750 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -11588 (0xffffd2bc) AXIS_THROTTLE_SET

    152813 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    152813 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -14277 (0xffffc83b) AXIS_THROTTLE_SET

    152859 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1461 (0xfffffa4b) AXIS_ELEVATOR_SET

    152859 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -16197 (0xffffc0bb) AXIS_THROTTLE_SET

    152922 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1488 (0xfffffa30) AXIS_ELEVATOR_SET

    152969 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1469 (0xfffffa43) AXIS_ELEVATOR_SET

    153016 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1454 (0xfffffa52) AXIS_ELEVATOR_SET

    153078 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1443 (0xfffffa5d) AXIS_ELEVATOR_SET

    153125 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1435 (0xfffffa65) AXIS_ELEVATOR_SET

    153188 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1429 (0xfffffa6b) AXIS_ELEVATOR_SET

    153234 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1424 (0xfffffa70) AXIS_ELEVATOR_SET

    153297 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    153344 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1418 (0xfffffa76) AXIS_ELEVATOR_SET

    153391 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    153453 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    153500 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    153563 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    153719 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    153781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET

    153828 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET

    153875 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET

    153938 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET

    153984 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    154031 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    154094 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    154141 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    154188 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    154250 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1452 (0xfffffa54) AXIS_ELEVATOR_SET

    154297 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1442 (0xfffffa5e) AXIS_ELEVATOR_SET

    154359 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1434 (0xfffffa66) AXIS_ELEVATOR_SET

    154406 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1428 (0xfffffa6c) AXIS_ELEVATOR_SET

    154469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1423 (0xfffffa71) AXIS_ELEVATOR_SET

    154516 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1420 (0xfffffa74) AXIS_ELEVATOR_SET

    154563 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1419 (0xfffffa75) AXIS_ELEVATOR_SET

    154625 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1417 (0xfffffa77) AXIS_ELEVATOR_SET

    154672 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1416 (0xfffffa78) AXIS_ELEVATOR_SET

    154719 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1415 (0xfffffa79) AXIS_ELEVATOR_SET

    154781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1414 (0xfffffa7a) AXIS_ELEVATOR_SET

    154797 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1413 (0xfffffa7b) AXIS_ELEVATOR_SET

    169953 System time = 12:44:19, FS2004 time = 10:15:45 (17:15Z)

    169953 *** FSUIPC log file being closed

    Memory managed: 2 Allocs, 84 Freed

    ********* FSUIPC Log file closed ****

  14. No mixture control...

    in FSUIPC Support Pete Dowson Modules

    Posted

    Hi

    I seem to have lost my micture control. I am using a CH yolk (USB) and FS2004 is getting input from the yoke, yet I cannot change mixture using the axis. Neother, significantly, can I change mixture using the mouse! But the jeyboard commands work.

    In desperation I removed FSUIPC and then all works fine. Indeed, within FSUIPC there is no movement of the axis detected.

    Can you help? I downloaded the latest FSUIPC...

    Thanks

    John L

    PS I checked the forum before posting: my sensitivites are not set at zero, theya re on maximum...

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.