Gerd

Thanks for your response and your advice to open a new thread. The logging told me the event "SPOILERS ON" and "SPOILERS OFF", which seem to be standard ones, but I wasn't successful to assign them to buttons. I found the Making a FSUIPC Macro (Tutorial) on avsim, which uses exacly that spoiler theme. Thus I'll follow there and continue posting there, when I'm not successful or will come back with a new thread. Gerd

Unfortunately the axes assignment, to move it by the throttle lever, as you recommended, was not successful (see picture FSUIPC Spoiler Button Control 2b.PNG). Nothing changes. Do you have any idea what has to be changed?

For the 390 Premier IA I could create a 390_Spoiler_Dump.mcro and assigned it to a joystick button, which works (see picture FSUIPC Spoiler Button Control 3.PNG) Compared with the spoiler switch it activates all 4 levers and moves them faster than the switch spoiler, which activates only the two outer levers. To do the same with only the switch spoiler I renamed the command to "L:ASD_390_LEVER_SPOILER=Toggle", but it didn't work, because I doesn't seem to be the correct one for that switch (see picture 390 Switch spoiler.PNG). Do you have any idea, where I can find that name?

That was successful as well, thanks!

Well, I followed your proposal to be more flexible in programming (see .ini-File). FSUIPC6_20230223_2.ini

o. k. thanks John, that worked. I could create two Profiles and Axes in FSUIPC6_20230216.ini, one "Single Enging HP", the other one called "Jet Two-engine". The type of action I assigned to “Send direct to FSUIPC calibration”. The funcionality switches correctly between both Profiles when aircraft are changed. But the "Jet Two-engine" Profile will still have to be modified for - 390 Premier IA to get the Cut-Off area of the throttles activated - Hawker 850XP to get the DUMP area of the spoilers to be activated; further more they are in reverse function, which has to be changed as well. But I think, I'm on the right way - FSUIPC6_20230216.ini

Let me try to read and play a bit. I find something to read in FSUIPC User Guide.pdf page 35. Or have you something else to recommend?

... but in the FSUIPC's axes assignment tab the In- and Out-field data are moving, when I move lever 1, but only lever 1. The other 5 don't trigger anything.

Well, in the Options Control menue nothing is moving, when I try to calibrate a lever ...

Well thanks! I discoved it in the note "There is a menu entry in FS for PFChid (in the Modules or Add-ons menu), but this is merely to confirm that the driver is correctly loaded, and to provide Version information."

Remark: with buttons I mean the flaps- and gearswitch and rudder rotaryknob. The rotaryknob only moves the blue triangle in the G1000 MFD RUDDER TRIM, but I can't notice anything in moving either the rudder or the pedals. Is that intended?

With the current PFChid64.dll V5.143 the throttle levers don't work either. Sorry, if I couldn't express my issue clearly enough, but with GUI (Graphical User Interface) I expected something similar as for the PFCcom unit used to choose the desired lever units and do the calibration, not only an information window. issue: The buttons work, but the levers have no effect on the aircraft. To ask in one sentence: How can I control and calibrate them? Gerd

yes, with the new one it appears in the Add-Ons and shows the know GUI (Graphical User Interface), when I click on it. Obviously both FSUIPC and PFC versions should match. Thanks so far - Gerd

Hello Pete or John, with the new FSUIPC6 I the addon doesn't appear in the Add-ons Menue of P3Dv4 as I was it used for years with FSUIPC5 in subfolder Modules (see picture 1 with FSUIPC5 and picture 2 with FSUIPC6). The FSUIPC6.log file shows a correct loading of the .dll file, but something goes wrong. I miss the line " 136922 PFC Menu entry added" which I identified in FSUIPC5.log The FSUIPC6-installation proceeded with the Add-on.xml method (see picture 3). I know it should work from thread https://forum.simflight.com/topic/89129-fsuipc6-doesnt-load-pfccom64dll-in-p3d-v4/ The latest FSUIPC6 ist from may 13th 2022 as your downloadpage reports. PFCcom64.dll from june 2nd 2017 is a bit older as your downloadpage reports with jan 14th 2021 ... Any idea? Regards Gerhard FSUIPC6.log

o. k. delete Tab and call back: 4.99 MB! Why not immedately - FSUIPC6.log PFChid64.log

... I had only 20kB total size for attachments in my first post above. Otherwise I got an error message. 20kB only? Is that correct? For this postI have only 468B max total size, so that I can't drag anything here. What's going wrong now? Regards Gerd

Hello Pete or John, with the new FSUIPC6 I couldn't get a GUI surface of PFChid64 USB-Trottle control. When I click on PFChid64 Addon within the sim (picture 1) I receive the same information message as with FSUIPC5 (picture 2). The FSUIPC6.log file shows a correct loading of the .dll file. But the PFChid64.log reports missing PFC.mcro files. Why are they missing? And there are other errors 6 reported - Could you find out a way to let it work correctly? The installation proceeded with the Add-on.xml method (see picture 3). Regards Gerd

o. k. Pete, thanks for clearification :-)

A positve info from my side: I installed 3D v4.1 and here it works (with money bravo), even without GFDev64.dll. The only difference I notice so far, is that it switches on/off with the battery switch and not with the avionic switch. But this is pretty less only. I'm not sure, what the GFDev64.dll can give me more. I'm not flying an airliner. But with general aviation aircraft most of the wheels and buttons are working, and with small business jets I'm in hope until carenado has been offered its updates. Gerhard

Hi All, meanwhile P3D v4 has reached me as well, and thus I ran the Install FSUIPC 5.exe which updateded the Modules folder with FSUIPC.DLL. For my MCP Pro I downloaded the latest GoFlight software GFConfigSetup_2_28_0.exe and ran them, which created the GFDevP3Dv4.exe in the ..\programs\GoFlight folder. But the MC Pro didn't work with P3D v4, although it worked fine just before with P3D v3. I could run the GFConfig.exe and the GFDevP3Dv4.exe, which creates the process, called "P3D-to-module data bridge (32 Bit) by the task manager, Version 2.02 Build 0. So, no 64 Bit process? And the Version looks like an old one. The reaction of the MCP Pro is lightning all displays with a horizontal illumination bar. This appears as well just before P3D comes up with its first display. Furthermore I found the GFDev64.dll on your "Useful Additional Programs" page (your note was very helpful ..) and put it into the Modules folder, but still nothing changed, when I switch on the avionics. The MCP Pro kept dark. I tried to write the path into the exe.xml, just as in P3D v3, but no help. Meanwhile nearly more than 2 months have passed since your last post, but no success until now. Could be the problem to create the 64 Bit databridge from GFDevP3Dv4.exe, or what do you mean, Pete? What is your current state to that? Are you working together with GF, or should I write a support ticket on GoFlight homepage? Regards Gerhard