kaspern83

when you were telling me to press the button, I didnt realize you wanted the fsuipc windows open lol. either way problem is fixed. I cleared out all button assignments, fixed the wideclient.ini to make sure everything matches f11, reasigned button in fsuipc and all is good. Thank you for your help and patience, and thank you for fsuipc!

I will try above to see if it works by changing ptt to f12. Well, i thought I was loosing assignments because after i click ok to save changes fsuipc exits, after I reopen fsuipc and the page is cleared out. When I click the button I have assigned though, it brings the settings back. So I assume thats fine. I thought because the page was cleared out the settings werent getting saved. Sorry this is my first time settings all this up. Can I clear out everything under these sections? and just start clean? I assume that with me keep playing around with different settings caused all the mess. [buttons] ButtonRepeat=20,10 3=P0,10,C1006,1 4=U0,10,C1006,2 5=R0,11,C1006,1 6=U0,11,C1006,2 [Keys] 2=122,8,1006,1,1006,2

I was following the instructions from vpilot: vPilot was developed to be an easy, out-of-the-box solution for VATSIM pilots which requires no additional software to work. The client uses the SimConnect architecture to communicate with the simulation, and as such does not require FSUIPC to function properly. From its inception, vPilot wasn’t designed with networking in mind (i.e. using the client on a machine other than the one Flight Simulator is running on). However, by using SimConnect, a side benefit is that the client will successfully work on ANY properly configured SimConnect client machine. The only known shortcoming with using SimConnect, is the inability (using SimConnect alone) to have the vPilot client on a networked machine, but your voice communications PTT button on your FSX machine (i.e. a button on a yoke/joystick). vPilot will work out-of-the-box on a SimConnect client machine, using a button or keyboard button press on the client machine. In order to use a button on your FSX machine for your PTT button, FSUIPC and WideFS is required, and its setup is quite easy. The following instructions assume you have a properly configured SimConnect client which can successfully communicate with your SimConnect server (Flight Simulation machine), and you know how to assign buttons in FSUIPC: Within FSUIPC, select the button you wish to use for your PTT button in the Buttons + Switches tab. For that button, select for FS Control, having both controls set to KEYSEND 1-255 (WideFS) and having the “Control to repeat while held” box ticked. For the Parameter(s), set them to 1 and 2 respectively, as shown in the below image Here is my fsuipc.ini: [General] UpdatedByVersion=4934 History=LHSJ0HL78T4S5Z9BNHAVN InitDelayDevicesToo=No UseSystemTime=Yes UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=Yes FixMachSpeedBug=Yes DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=Yes CloudIcing=Yes GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=Yes SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=Yes TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=Yes WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=Yes WhiteMessages=Yes ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=Yes ElevatorSpikeRemoval=Yes AileronSpikeRemoval=Yes ReversedElevatorTrim=No ClockSync=Yes ClockSyncMins=1 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=Yes BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No AxesWrongRange=No TCASid=Flight TCASrange=0 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes OOMcheck=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No NewInterceptTextMenu=No DelayedMouseLookZoom=No FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [Programs] Run1=HIDE,”E:\Microsoft Flight Simulator X\Modules\FSX.bat" Run2=READY,CLOSE,"C:\Users\Kacper Desktop\AppData\Local\vPilot\TrafficProxy.exe" Run3=READY,CLOSE,"E:\AivlaSoft\EFB\AivlaSoft.Efb.DataProvider.exe" [JoyNames] AutoAssignLetters=No 0=Logitech Extreme 3D 0.GUID={3B59E4F0-CE41-11E3-8001-444553540000} [buttons] ButtonRepeat=20,10 3=P0,10,C1006,1 4=U0,10,C1006,2 5=R0,11,C1006,1 6=U0,11,C1006,2 [AutoSave] Next=5 Interval=60 Files=5 SaveOnGround=Yes AutoSaveEnabled=Yes 1=Tue 210037 2=Tue 210136 3=Tue 210236 4=Wed 235950 5=Tue 202923 [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [sounds] Path=E:\Microsoft Flight Simulator X\Sound\ Device1=Primary Sound Driver Device2=Speakers (High Definition Audio Device) Device3=ASUS VE258-8 (NVIDIA High Definition Audio) Device4=ASUS VE258-4 (NVIDIA High Definition Audio) Device5=Digital Audio (S/PDIF) (High Definition Audio Device) Device6=Digital Audio (S/PDIF) (High Definition Audio Device) [ClientNames] 1=KACPER-LAPTOP [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 [Keys] 2=122,8,1006,1,1006,2 Here is my wideclient.log: ********* WideClient Log [version 6.999m] Class=FS98MAIN ********* Date (dmy): 03/07/14, Time 00:07:24.993: Client name is KACPER-LAPTOP 203 LUA: "C:\WideClient\Initial.LUA": not found 234 Attempting to connect now 234 Trying to locate server: Need details from Server Broadcast 234 Failed to connect: waiting to try again 2234 Attempting to connect now 4265 Server = KACPERDESKTOP 4265 Trying TCP/IP host "KACPERDESKTOP" port 8002 ... 4265 ... Okay, IP Address = 192.168.1.40 4281 Connection made okay! 13687 Post/Send input for KeyHook action 1 13687 SendInput used for KeyHook action 1 13687 WM_KEYDOWN sent to Window 00090f76 ok, VK code 123 13687 Action request sent 1 events 13875 Post/Send input for KeyHook action 2 13890 SendInput used for KeyHook action 2 13890 WM_KEYUP sent to Window 00090f76 ok, VK code 123 13890 Action request sent 1 events 38328 Post/Send input for KeyHook action 1 38328 SendInput used for KeyHook action 1 38328 WM_KEYDOWN sent to Window 00090f76 ok, VK code 123 38328 Action request sent 1 events 38531 Post/Send input for KeyHook action 2 38531 SendInput used for KeyHook action 2 38531 WM_KEYUP sent to Window 00090f76 ok, VK code 123 38531 Action request sent 1 events Looks like to me that the key is coming through? just not being seen in vpilot? Please confirm and ill take my troubleshooting over to their forum. Thanks

OK, in FSUIPC buttons and switches page these are my settings: Joy# 0 Btn# 10 Select for FS control: checked Profile: unchecked control sent when button pressed: Keysend 1-255 widefs Parameter: 1 Control to repeat while held: checked Control sent when button released: Keysend 1-255 widefs parameter: 2 FSX says 1 client connected via widefs in toolbar uptop wideclient window on client also says connected After I click OK in fsuipc and I click the button on joystick I have assigned in FSUIPC, I have vpilot running on client but the ptt button is not engaging. I made sure F11 is set to be the ptt button on client. If I go back into FSUIPC buttons and switched page, nothing is filled out anymore. If I refill everything again, the button still doesnt do anything in vpilot. I have attempted to try a different button on joystick without any success. I dont have any issues running any of my other software via wideclient or simconnect like pfpx map to show aircraft position. as next works perfect, aivlasoft works perfect, vpilot works perfect also (other than PTT button) Is there something I must do on server side to tell the joystick that button number 10 is F11 or does wideclient knows automatically via KeySend1=123,16 ; Press F11 KeySend2=123,24 ; Release F11 UseSendInput=Yes Thank you.

No, Joystick is fully working the whole time in fsx, all other buttons work. fsx machine is windows 7, client machine in windows 8. Is there any compatibility issues?

haha, i do press the button, unfortunately nothing happens =)

Sorry, I did not check off the profile checkmark and same issue. Yes the joystick button is cleared out also. The picture above is a screenshot from the vpilot manual. I copied the settings over to my fsuipc settings. I will give you a screenshot before I click OK and what i get when i go back into fsuips when i get home later today. Thanks

Hi Pete, thank you for your reply. Yes I have set f11 to be the keysend button in the wideclient.ini file just as stated in the link i have included above. I was not sure whether a mouse button can be assigned to be sent over wideclient or not I just tried to see if it will work. I would of preferred to have a mouse button assigned versus my joystick but It does not work either way. I am using logitech extreme 3d pro joystick and I am trying to send f11 keysend to activate ptt on the client laptop. This is what I added to wideclient.ini: KeySend1=123,16 ; Press F11 KeySend2=123,24 ; Release F11 UseSendInput=Yes I have set F11 to be the PTT button in vpilot the fsuipc settings look like this: When I click OK, fsuipc exits but when I go back into fsuipc the fields are all cleared out. Is that normal? I hope this was a little bit more clear. Thank you for any help.

Hello, I am having an issue sending a keypress via fsuips to a client running wideclient and vpilot. I would like to use a button on my mouse assigned to be F11 to do PTT on the client for voice. Wideclient has no issues connecting, as well as aivlasoft, pfpx, activesky next and vpilot itself. I am running traffic proxy on the server fsx machine as well. I have followed the instructions on vpilot forums http://vpilot.metacraft.com/Assets/Files/vPilotNetworkSetup.pdf. when I go into fsuipc settings in fsx, and I setup the keysend under "Key presses". It does not work, it also does not work when setup the "buttons and swtiches" page either. when I click OK for when I setup buttons and switches and then I go back into fsuips the selections are cleared out. When I fill out the "key presses" page the settins get saved but the keysend does not work. What am I doing wrong here? Thank you for any help!