Air59

Pete, It works well now !!! Thanks so much ! I don't know what LM has done but for sure it gives you lot of work :-(( What a full retro compatible software :-)) Thierry

Hi Pete, Here is the log file. To understand, my script monitor GSX LVAR. When bording is requestied, i want to open automaticly all the doors and so in my script i have the command : ipc.writeUB(0x3367, 15) In the attached log, i will be able to see the script running one time (the result is only the forward cargo door opens), then i open all the doors via buttons (that works fine).then i reset GSX and let the script running a second time (without manual intervention). Feel free to ask if you want other tests. THierry FSUIPC4.rar

Thanks Pete for your very quick and complete answer (as usual). I had FSUIPC v 4.946c. I just installed v4.946e (the dll i put in the module folder). But it doesn't fix my issue. Nevermind, best will be to wait for LM update i think. Thierry

Hi Pete, with new FSUIPC, doors assignement works well. But i have now a little problem with LUA script. With P3D v2.5 and previous version of fsuipc, i used to open and close doors via lua script. For instance, ipc.writeUB(0x3367, 15) did the thing very well (to open all pax and cargo door). With P3d v3 and new fsuipc, it doesn't work anymore. It seems only 1 door can be opened or closed. ipc.writeUB(0x3367, 15) opens only aft cargo door. do you know an other way to open doors via lua script. I saw in an other thread that there might be a function TOGGLE_EXIT_AIRCRAFT, but i don't know how to use it (even i searched on the forum, manuals and google...). Many thanks for your help Pete. Thierry

Just installed and tested the D version....it works like before !!!!!!!MANY thanks Pete....always here and so helpfull ! I must say i am very happy to get the door back !! In your last message, you are speaking about 3667 offset. You mean 3367 i'm sure ;-) Have a good evening and once again : thanks a lot Thierry

Hi Pete, Sorry for the log, i was on bed ;-) Fortunatly, you've found the problem. Thanks for that ! I hope you will be able to fix it and, first of all, it won't give you too much work ! One more time, thanks a lot for your software without which, our sim experience would'nt be the same ! Best regards, Thierry

Hi Pete; Thanks for trying to help me ! I installed fsuipc 4.947b (fresh install, nothing in the module folder before that). with my favorite aircraft (738 PROSIM) and with other default aircraft (i tested robinson r22, Beech king air and an other helicopter), i have the same behaviour : With Shift + E + 1,2,3 or 4, doors are working well. For instance, with 738 PROSIM : S+E+1 : left forward and after doors S+E+2 : right doors S+E+3 : aft cargo door S+E+4 : forw cargo door When i set offset 3367 with parameters 1,2,4 or 8 (togglebits), left forward and after doors open and close (such as i press S+E+1) same as Toggle aircraft exit with 1,2,3 or 4 in the debug window i can see that the offset and the parameters are well sent. I did my test without PROSIM, nor Prosiutils running... I really don't know why it is working well on v2.5 and not on v3. And i have the feeling i am the only one facing this behaviour.... Will go on testing.... Thierry

Hi Pete, Many thanks for your very quick answer. Downloaded and installed v 4.947 (october the 8th in FSUIPC main page module) and unfortunatly, the doors don't work better. Whatever the parameter number is (0,2,4 or 8), when i press on the programmed switch, the left forward and aft doors open or close but nothnig happens with the right doors nor the cargo ones... Will go on testing. Thierry

Hi all, First of all, sorry if the answer to the following question has already been given. I dis a seach on this forum and on Internet without any success. Here is my problem : With P3d v2.5, i used to open and close my aircraft's doors via switches and switches assignement inFSUIPC using Offset Byte togglebit : 3367 with parameters 1,2,4. I also wrote a lua script with this offset and all went ok. I upgraded to P3D v3 (and FSUIPC 4.946) and i can only open or close the left doors. Right doors and cargo doors stay closed. Using the Toggle_Aircraft_Exit doesn't work better. Do you have any idea of what i am doing wrong ? Thanks a lot for your help. Thierry France