remcosol

If the rudder trim connects to sim connect which since next version ? Or does that depend on the aircraft . I have no sim connect at the moment

Sorry I was not clear I think , with the question what does the trim do I meant in p3d/ fsx . Is it like in a real aircraft a trim tab etc or does it just alter the elevator / aileron or rudder position , so is the rudder trim fighting the rudder position and causing crashes . My elevator trim is working ok it's just the rudder trim for some weird reason . What offsets do you use for the primary flight controls , because there are more options I think , offset wise. I have had this kinda problem before in fsx and p3d v2+ . So I'm not convinced it is a lm issue ...?

Hello Pete, It is confirmed my rudder trim offset that is causing stackshash errors . I have removed it for now , the question is why does it cause crashed. As far as I can see nothing else is (visually) moving the rudder trim . But what does the rudder (elevator and aileron ) trim actually do ? Does it just alter the rudder axis or is it a different beast all together ? I have at this moment set up my primary flight controls as raw pfc axis . Is it better or even possible to set them up in a different way and how should trim axes be setup (offset wise) in p3d or fsx. I can remember a couple off years ago I set them up as aileron/elevator /rudder axis instead of raw off axis ( don't have the offsets here at the moment) but that doesn't seem to work anymore ?

I think i found THE origin (just like you said something is trying to alter the rudder trim ) so disregard for now

Hello Pete, Sorry to bother you again with this, im desperately trying to figure out what is going on... This is the same error , kinda. can you tell me the differnce or simularity in what your seeing in this log. new: ********* FSUIPC4, Version 4.947c by Pete Dowson ********* Reading options from "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 Module base=63930000 User Name="remco sol" User Addr=xxxxxxxx WideFS7 Key is provided 47 System time = 22/10/2015 12:46:04 47 FLT UNC path = "C:\Users\P3D\Documents\Prepar3D v3 Files\" 47 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 47 Found it: trying to connect 62 FS UNC path = "D:\Lockheed Martin\Prepar3D v3\" 140 ---------------------- Joystick Device Scan ----------------------- 156 Product= USBAXES-PLUS 156 Manufacturer= Opencockpits 156 Vendor=0000, Product=00CC (Version 0.0) 156 Serial Number= Opencockpits 156 Product= 156 Manufacturer= 156 Vendor=0000, Product=0004 (Version 0.0) 156 Serial Number= 156 ------------------------------------------------------------------- 172 LogOptions=00000000 00000001 172 ------------------------------------------------------------------- 172 ------ Setting the hooks and direct calls into the simulator ------ 172 --- CONTROLS timer memory location obtained ok 172 --- SIM1 Frictions access gained 172 --- FS Controls Table located ok 172 --- Installed Mouse Macro hooks ok. 172 --- Wind smoothing fix is installed 172 --- All links checked okay 172 ------------------------------------------------------------------- 172 SimConnect_Open succeeded: waiting to check version okay 172 Trying to use SimConnect Prepar3D 3328 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0) 3328 Initialising SimConnect data requests now 3328 FSUIPC Menu entry added 3343 C:\Users\P3D\Documents\Prepar3D v3 Files\start.fxml 3343 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\DH-114 Heron\DH-114.air 55031 System time = 22/10/2015 12:46:59, Simulator time = 14:02:18 (13:02Z) 55031 Aircraft="De Havilland DH-114 Heron Apache" 56047 Starting everything now ... 57218 Advanced Weather Interface Enabled 187015 Sim stopped: average frame rate for last 132 secs = 29.9 fps 336062 Sim stopped: average frame rate for last 141 secs = 29.7 fps 342343 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\beech_baron_58\Beech_Baron_58.air 342453 Aircraft="Beech Baron 58" 627203 Sim stopped: average frame rate for last 284 secs = 29.7 fps 863562 Sim stopped: average frame rate for last 67 secs = 29.7 fps 871140 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\DH-114 Heron\DH-114.air 871172 Aircraft="De Havilland DH-114 Heron Lufthansa" 929500 Sim stopped: average frame rate for last 58 secs = 29.7 fps 1207125 Sim stopped: average frame rate for last 147 secs = 29.2 fps 1776812 Sim stopped: average frame rate for last 417 secs = 29.7 fps 2343468 Sim stopped: average frame rate for last 27 secs = 29.7 fps 2768172 Sim stopped: average frame rate for last 25 secs = 29.7 fps 2933375 Sim stopped: average frame rate for last 132 secs = 29.7 fps 3778000 ***ERROR C0000005 at 6E5A4DF4 ProcessRequest 3778000 *** Access violation trying to read address 00000485 3778000 *** EAX 0000047D EBX 00000001 ECX 459A3970 EDX 00000000 EDI 1096058C ESI 0049EC9C previous: ********* FSUIPC4, Version 4.947c by Pete Dowson ********* Reading options from "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 Module base=64320000 User Name="remcosol" User Addr=xxxxxxxxxxx FSUIPC4 Key is provided WideFS7 Key is provided 47 System time = 19/10/2015 13:45:16 47 FLT UNC path = "C:\Users\P3D\Documents\Prepar3D v3 Files\" 47 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 47 Found it: trying to connect 63 FS UNC path = "D:\Lockheed Martin\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= 203 Manufacturer= 203 Vendor=0000, Product=0004 (Version 0.0) 203 Serial Number= 203 Product= 203 Manufacturer= 203 Vendor=0000, Product=0004 (Version 0.0) 203 Serial Number= 203 ------------------------------------------------------------------- 219 LogOptions=00000000 00000001 219 ------------------------------------------------------------------- 219 ------ Setting the hooks and direct calls into the simulator ------ 219 --- CONTROLS timer memory location obtained ok 219 --- SIM1 Frictions access gained 219 --- FS Controls Table located ok 219 --- Installed Mouse Macro hooks ok. 219 --- Wind smoothing fix is installed 219 --- All links checked okay 219 ------------------------------------------------------------------- 219 SimConnect_Open succeeded: waiting to check version okay 219 Trying to use SimConnect Prepar3D 3297 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0) 3297 Initialising SimConnect data requests now 3297 FSUIPC Menu entry added 3328 C:\Users\P3D\Documents\Prepar3D v3 Files\start.fxml 3328 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\DH-114 Heron\DH-114.air 11719 Weather Mode now = Custom 14094 C:\Users\P3D\Documents\Prepar3D v3 Files\ibiza.fxml 34656 System time = 19/10/2015 13:45:51, Simulator time = 14:06:45 (13:06Z) 34672 Aircraft="De Havilland DH-114 Heron Apache" 35672 Starting everything now ... 36844 Advanced Weather Interface Enabled 357266 Exception 20 "DATA_ERROR", Ref 16922, Index param 1 on write SetData for "ADF SOUND" 923203 Sim stopped: average frame rate for last 888 secs = 29.8 fps 7280188 Exception 3 "UNRECOGNIZED_ID", Ref 265373, Index param 3 on write SetData for "GENERAL ENG THROTTLE LEVER POSITION:1" 8476703 Sim stopped: average frame rate for last 7548 secs = 29.8 fps 8706485 Sim stopped: average frame rate for last 180 secs = 29.7 fps 8779516 Sim stopped: average frame rate for last 59 secs = 29.7 fps 9694969 Sim stopped: average frame rate for last 906 secs = 29.8 fps 10186938 Sim stopped: average frame rate for last 483 secs = 29.8 fps 10240360 Sim stopped: average frame rate for last 43 secs = 29.7 fps 10294594 Sim stopped: average frame rate for last 34 secs = 29.7 fps 10335453 Sim stopped: average frame rate for last 33 secs = 29.7 fps 10449203 Sim stopped: average frame rate for last 101 secs = 29.8 fps 10611203 Sim stopped: average frame rate for last 144 secs = 29.8 fps 14119875 ***ERROR C0000005 at 71884DF4 ExWriteStateData(Offset=0C04, Size=2) 14119875 *** Access violation trying to read address 00000485 14119875 *** EAX 0000047D EBX 00000001 ECX 4FA49858 EDX 00000000 EDI 10EB058C ESI 1C0AF0E4 best regards Remco

I am trying to figure out what might be trying to Center the trim , I have nothing running that I know of , other than the rudder trim itself, that controls the rudder trim . I'm hoping it is a faulty potentiometer or joystick card , today I'll have the answer I hope ....

My stackshash fault module is always the same number e70a, I don't know if this is always related to the same (rudder trim) event ?

Thank you Pete , I just build a new computer with new components to make sure (as much as possible ) that the pc is ok . It might be the joystick card or potentiometer. I have replaced both . More testing tomorrow and see if it pops up again , or something different ?

I'll investigate thank you !

357266 Exception 20 "DATA_ERROR", Ref 16922, Index param 1 on write SetData for "ADF SOUND" 923203 Sim stopped: average frame rate for last 888 secs = 29.8 fps 7280188 Exception 3 "UNRECOGNIZED_ID", Ref 265373, Index param 3 on write SetData for "GENERAL ENG THROTTLE LEVER POSITION:1" Are these two due to the same reason? I am having this problem since p3d v2.4 for some reason. I am trying to figure out if it is hardware related (switches etc) although at this moment i do not have an adf sound toggle switch because i am still trying to figure out what is going on. Do the stock keyboard assignments (p3d) need to deleted as well? Might it be my wireless keyboard that is making unwanted inputs? Thank you, Remco

Thanks Pete for the answer, my question is with the 0348 offset is it working with every aircraft, do aircraft pickup icing in p3d ? Best regards, Remco

Pete another question, Now im using this sioc script for an ide detector: Var 0113, name ice_alert, Link FSUIPC_IN, Offset $0E86, Length 2 { IF &ice_alert = 1 { &rele6 = 1 } IF &ice_alert = 0 { &rele6 = 0 } IF &ice_alert = 2 { &rele6 = 1 } IF &ice_alert = 0 { &rele6 = 0 } IF &ice_alert = 3 { &rele6 = 1 } IF &ice_alert = 0 { &rele6 = 0 } IF &ice_alert = 4 { &rele6 = 1 } IF &ice_alert = 0 { &rele6 = 0 } } Var 0114, name rele6, Link USB_RELAYS, Device 1, Output 6 But i noticed there is another offset that should do the same job: Var 0113, name structural_ice, Link FSUIPC_IN, Offset $0348, Length 2 { IF V0113 > 300 { &rele6 = 1 } IF V0113 < 300 { &rele6 = 0 } } Var 0114, name rele6, Link USB_RELAYS, Device 1, Output 6 However it does not seem to work , values are 0-16384 but what are these values? Best regards Remco

Hello Pete, Maybe you have any idea where i need to go looking? these are my error logs: Beschrijving Pad naar toepassing met fout: D:\Lockheed Martin\Prepar3D v3\Prepar3D.exe Probleem met handtekening Naam van probleemgebeurtenis: APPCRASH Naam van de toepassing: Prepar3D.exe Versie van toepassing: 3.0.10.14945 Tijdstempel van toepassing: 560b4abe Naam van foutmodule: StackHash_e70a Versie van foutmodule: 10.0.10240.16430 Tijdstempel van foutmodule: 55c599e1 Uitzonderingscode: c0000374 Uitzonderingsmarge: PCH_5F_FROM_ntdll+0x0006919C Versie van besturingssysteem: 10.0.10240.2.0.0.768.101 Landinstelling-id: 1043 Aanvullende informatie 1: e70a Aanvullende informatie 2: e70a6b6c970fc5795e672aeb48fea89e Aanvullende informatie 3: cfb2 Aanvullende informatie 4: cfb2c05a94b504a4b949ac6e4bb2d182 Extra informatie over het probleem Bucket-id: 3a7dc09715af649410f789526c3c9d71 (107644420920) ********* FSUIPC4, Version 4.947c by Pete Dowson ********* Reading options from "D:\Lockheed Martin\Prepar3D v3\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 Module base=64320000 User Name="remcosol" User Addr=xxxxxxxxxxxxxxx FSUIPC4 Key is provided WideFS7 Key is provided 47 System time = 19/10/2015 13:45:16 47 FLT UNC path = "C:\Users\P3D\Documents\Prepar3D v3 Files\" 47 Trying D:\Lockheed Martin\Prepar3D v3\Modules\SimConnectP3D2.dll 47 Found it: trying to connect 63 FS UNC path = "D:\Lockheed Martin\Prepar3D v3\" 203 ---------------------- Joystick Device Scan ----------------------- 203 Product= 203 Manufacturer= 203 Vendor=0000, Product=0004 (Version 0.0) 203 Serial Number= 203 Product= 203 Manufacturer= 203 Vendor=0000, Product=0004 (Version 0.0) 203 Serial Number= 203 ------------------------------------------------------------------- 219 LogOptions=00000000 00000001 219 ------------------------------------------------------------------- 219 ------ Setting the hooks and direct calls into the simulator ------ 219 --- CONTROLS timer memory location obtained ok 219 --- SIM1 Frictions access gained 219 --- FS Controls Table located ok 219 --- Installed Mouse Macro hooks ok. 219 --- Wind smoothing fix is installed 219 --- All links checked okay 219 ------------------------------------------------------------------- 219 SimConnect_Open succeeded: waiting to check version okay 219 Trying to use SimConnect Prepar3D 3297 Running in "Lockheed Martin® Prepar3D® v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0) 3297 Initialising SimConnect data requests now 3297 FSUIPC Menu entry added 3328 C:\Users\P3D\Documents\Prepar3D v3 Files\start.fxml 3328 D:\Lockheed Martin\Prepar3D v3\SimObjects\Airplanes\DH-114 Heron\DH-114.air 11719 Weather Mode now = Custom 14094 C:\Users\P3D\Documents\Prepar3D v3 Files\ibiza.fxml 34656 System time = 19/10/2015 13:45:51, Simulator time = 14:06:45 (13:06Z) 34672 Aircraft="De Havilland DH-114 Heron Apache" 35672 Starting everything now ... 36844 Advanced Weather Interface Enabled 357266 Exception 20 "DATA_ERROR", Ref 16922, Index param 1 on write SetData for "ADF SOUND" 923203 Sim stopped: average frame rate for last 888 secs = 29.8 fps 7280188 Exception 3 "UNRECOGNIZED_ID", Ref 265373, Index param 3 on write SetData for "GENERAL ENG THROTTLE LEVER POSITION:1" 8476703 Sim stopped: average frame rate for last 7548 secs = 29.8 fps 8706485 Sim stopped: average frame rate for last 180 secs = 29.7 fps 8779516 Sim stopped: average frame rate for last 59 secs = 29.7 fps 9694969 Sim stopped: average frame rate for last 906 secs = 29.8 fps 10186938 Sim stopped: average frame rate for last 483 secs = 29.8 fps 10240360 Sim stopped: average frame rate for last 43 secs = 29.7 fps 10294594 Sim stopped: average frame rate for last 34 secs = 29.7 fps 10335453 Sim stopped: average frame rate for last 33 secs = 29.7 fps 10449203 Sim stopped: average frame rate for last 101 secs = 29.8 fps 10611203 Sim stopped: average frame rate for last 144 secs = 29.8 fps 14119875 ***ERROR C0000005 at 71884DF4 ExWriteStateData(Offset=0C04, Size=2) 14119875 *** Access violation trying to read address 00000485 14119875 *** EAX 0000047D EBX 00000001 ECX 4FA49858 EDX 00000000 EDI 10EB058C ESI 1C0AF0E4 Best regards, Remco

Vor 1

Thank you , at this moment the main suspect is a Flightillusion for 1 gauge , do not know if it is the gauge itself or something in the driver / p3d or fsx causing it . More testing required

Some controller etc causing a buffer overrun or other issue memory leak ?

Can fsuipc if over tasked cause stackshash errors ?

I've deleted the stock axis in p3d do you usually delete all stock assignments ?

P3d v3.0 runs good without my cockpit connected , getting stack hash errors with the hardware running . Build a new computer just to check if it wasn't computer related .. Changed Windows and p3d version still stackshash errors .... Puzzle continues

Hello Pete, just a quick question , can you see if this stackhash has got anything to do with fsuipc? Bron Prepar3D exe Overzicht Werkt niet meer Datum ‎10-‎10-‎2015 18:34 Status Verzonden rapport Beschrijving Pad naar toepassing met fout: D:\Lockheed Martin\Prepar3D v3\Prepar3D.exe Probleem met handtekening Naam van probleemgebeurtenis: APPCRASH Naam van de toepassing: Prepar3D.exe Versie van toepassing: 3.0.10.14945 Tijdstempel van toepassing: 560b4abe Naam van foutmodule: StackHash_e70a Versie van foutmodule: 10.0.10240.16430 Tijdstempel van foutmodule: 55c599e1 Uitzonderingscode: c0000374 Uitzonderingsmarge: PCH_D0_FROM_ntdll+0x0006919C Versie van besturingssysteem: 10.0.10240.2.0.0.768.101 Landinstelling-id: 1043 Aanvullende informatie 1: e70a Aanvullende informatie 2: e70a6b6c970fc5795e672aeb48fea89e Aanvullende informatie 3: 9672 Aanvullende informatie 4: 96726afbdf91c2faff81a251845d260f Extra informatie over het probleem Bucket-id: 3a7dc09715af649410f789526c3c9d71 (107644420920) Best regards, Remco

Problem has been reported!

My appologies, it is 4.946 ( it was late last night ;) ). The problem has been fixed ! as you said it was not fsuipc but something other very interesting was at the base of the problem.... Just before the install i changed one other thing. The water detail level was changed from Ultra to medium. This causes the stutters. For some reason it has to go to ultra to be smooth..... sounds too good to be true...... thank you for your support!

Can it be the auto save feature ? Or an incorrect removal of v 4.95 on my part ( xml.dll) ?

it gets worse..... after deleting fsuipc and clearing shaders and cfg. the stutters remain and make p3d v3.0 unusable.......

Is it simconnect? I have deleted shaders and .cfg but no difference . It runs smooth for 3 seconds and then a stutter period comes on. like a cycle. It ran smooth also with 60 fps but now 3 sec 60 fps then 45 etc etc. ( 60 fps not used during logfile)