RealAir Beech Duke Turbine

Delta14Sierra · November 3, 2011

Below is an assortment of LUA scripts I have for assigning commands to the Beech Duke Turbine (as well as the Beech Duke B60) under LINDA. I started with the scripts that came with LINDA and have since added my own.

With the scripts I have added, I have been able to get EVERY switch on the left sub-panel to work. Even if you do not use LINDA, you should be able to glean valuable info to write your own individual scripts for the RealAir Beech Duke.

Because many of the commands are "toggles," it is important to have your mechanical switches in their DEFAULT starting positions. Since I start up Cold & Dark, all of my mechanical switches must be off, otherwise their subsequent functions will not represent what is going on in the cockpit.

NOTE: Some of these scripts include lines for sending commands to various GoFlight modules. You will need to edit to suit your personal use.

There are multiple hours behind some of these snippets of code, so enjoy!

-- ################################
-- RealAir Duke Turbine specific functions
-- ################################

-- ## Annunciators ###############
function Annunciator_1_Test_On ()
	ipc.writeLvar("L:DukeT_Annun_Test_1", 1)
	end

function Annunciator_1_Test_Off ()
	ipc.writeLvar("L:DukeT_Annun_Test_1", 0)
	end

function Annunciator_2_Test_On ()
	ipc.writeLvar("L:DukeT_Annun_Test_2", 1)
	end

function Annunciator_2_Test_Off ()
	ipc.writeLvar("L:DukeT_Annun_Test_2", 0)
	end

function Annunciator_Test_On ()
	ipc.writeLvar("L:Main_Annun_Test", 1)
	end

function Annunciator_Test_Off ()
	ipc.writeLvar("L:Main_Annun_Test", 0)
	end

function Duke_Master_Warning_Reset ()
	LVarSet = "L:MW_Reset"
	val = 0
	if ipc.readLvar(LVarSet) == 0  then
	val = 1
	end
	ipc.writeLvar(LVarSet, val)
	end

-- ## Avionics ###############

function Duke_Avionics_Master_On ()
	ipc.control(66701, 1) -- Avionics Master Switch On 0x3103
   	gfd.SetBright(GF46,1,15)
	gfd.SetBright(GFMCP,0,15)
	ipc.set("AvionicsMaster", 1)
	end

function Duke_Avionics_Master_Off ()
	ipc.control(66701, 0) -- Avionics Master Switch Off 0x3103
   	gfd.SetBright(GF46,1,0)
	gfd.SetBright(GFMCP,0,0)
	ipc.set("AvionicsMaster", 0)
	end

function Duke_Main_Inverter_On ()
	Inverter = "L:Duke_Inverter_Switch"
	ipc.writeLvar(Inverter, 0)
	end

function Duke_Standby_Inverter_On ()
	Inverter = "L:Duke_Inverter_Switch"
	ipc.writeLvar(Inverter, 2)
	end

function Duke_Inverter_Off ()
	Inverter = "L:Duke_Inverter_Switch"
	ipc.writeLvar(Inverter, 1)
	end

function Duke_Instruments_On ()

	_sleep(200, 400)
	ipc.writeLvar("L:NavCom1_On", 0)

	_sleep(200, 400)
	ipc.writeLvar("L:NavCom2_On", 0)

	_sleep(200, 400)
	ipc.writeLvar("L:XPDR_State", 1)

	_sleep(200, 400)
	ipc.writeLvar("L:dukeGpsOn", 1)

	_sleep(200, 400)
	ipc.writeLvar("L:ADF_On_Switch", 1)

	_sleep(200, 400)
 	ipc.writeLvar("L:DME_Switch", 1)  -- DME On
	ipc.runlua("DME-Select", 1)
		value = "1  " .. ipc.readSTR("0C29", 5) -- Reads DME1 Distance
    	gfd.SetDisplay(GF166, 2, 0, value) -- Displays DME1 Distance
		value = ipc.readSTR("0C2E", 5) -- Reads DME1 Speed
		gfd.SetDisplay(GF166, 2, 1, value) -- Displays DME1 Speed

	end

function Duke_Instruments_Off ()

   	_sleep(200, 400)
	ipc.writeLvar("L:DME_Switch", 0)

   	_sleep(200, 400)
	ipc.writeLvar("L:NavCom1_On", 1)

	_sleep(200, 400)
	ipc.writeLvar("L:NavCom2_On", 1)

	_sleep(200, 400)
	ipc.writeLvar("L:XPDR_State", 0)

	_sleep(200, 400)
	ipc.writeLvar("L:dukeGpsOn", 0)

	_sleep(200, 400)
	ipc.writeLvar("L:ADF_On_Switch", 0)

	end

-- ## Electrics #####################################

function Toggle_Master_Battery ()
	ipc.control(66241, 0)
	gfd.SetBright(GFMCP,0,0)
	if ipc.get("MasterBattery") == 0 then
    	gfd.SetBright(GFLGT, 0, 15)
    	ipc.set("MasterBattery", 1)
	elseif ipc.get("MasterBattery") == 1 then
    	gfd.SetBright(GFLGT, 0, 0)
    	ipc.set("MasterBattery", 0)
    	end
	end

function Duke_L_Ignition_Switch_On ()
	ipc.writeLvar("L:ignSwL", 2)
	end

function Duke_L_Ignition_Switch_Auto ()
	ipc.writeLvar("L:ignSwL", 0)
	end

function Duke_L_Ignition_Switch_Off ()
	ipc.writeLvar("L:ignSwL", 1)
	end

function Duke_R_Ignition_Switch_On ()
	ipc.writeLvar("L:ignSwR", 2)
	end

function Duke_R_Ignition_Switch_Auto ()
	ipc.writeLvar("L:ignSwR", 0)
	end

function Duke_R_Ignition_Switch_Off ()
	ipc.writeLvar("L:ignSwR", 1)
	end

-- Magnetos

function Magneto_1_Off ()
	ipc.sleep(250)
	ipc.writeUW("0892", 0)
	end

function Magneto_1_R_On ()
	ipc.writeUW("0892", 2)
	end

function Magneto_1_L_On ()
	ipc.writeUW("0892", 1)
	end

function Magneto_1_Both ()
	ipc.writeUW("0892", 3)
	end

function Magneto_1_Start ()
	ipc.writeUW("0892", 4)

	end

function Magneto_2_Off ()
	ipc.sleep(250)
	ipc.writeUW("092A", 0)
	end

function Magneto_2_R_On ()
	ipc.writeUW("092A", 2)
	end

function Magneto_2_L_On ()
	ipc.writeUW("092A", 1)
	end

function Magneto_2_Both ()
	ipc.writeUW("092A", 3)
	end

function Magneto_2_Start ()
	ipc.writeUW("092A", 4)

	end

-- ignition
function DukeT_Ignition_L_on ()
	ipc.writeLvar("L:ignSwL", 2)
	DspShow ("IgnL", "On")
end

function DukeT_Ignition_R_on ()
	ipc.writeLvar("L:ignSwR", 2)
	DspShow ("IgnR", "On")
end

function DukeT_Ignition_B_on ()
	ipc.writeLvar("L:ignSwL", 2)
	ipc.writeLvar("L:ignSwR", 2)
	DspShow ("IgnB", "On")
end

function DukeT_Ignition_L_auto ()
	ipc.writeLvar("L:ignSwL", 0)
	DspShow ("IgnL", "Auto")
end

function DukeT_Ignition_R_auto ()
	ipc.writeLvar("L:ignSwR", 0)
	DspShow ("IgnR", "Auto")
end

function DukeT_Ignition_B_auto ()
	ipc.writeLvar("L:ignSwL", 0)
	ipc.writeLvar("L:ignSwR", 0)
	DspShow ("IgnB", "Auto")
end

function DukeT_Ignition_L_off ()
	ipc.writeLvar("L:ignSwL", 1)
	DspShow ("IgnL", "Off")
end

function DukeT_Ignition_R_off ()
	ipc.writeLvar("L:ignSwR", 1)
	DspShow ("IgnR", "Off")
end

function DukeT_Ignition_B_off ()
	ipc.writeLvar("L:ignSwL", 1)
	ipc.writeLvar("L:ignSwR", 1)
	DspShow ("IgnB", "Off")
end

-- generator
function DukeT_Generator_L_on ()
	ipc.writeSB("3b78", 1)
	DspShow ("GenL", "On")
end

function DukeT_Generator_R_on ()
	ipc.writeSB("3ab8", 1)
	DspShow ("GenR", "On")
end

function DukeT_Generator_B_on ()
	ipc.writeSB("3b78", 1)
	ipc.writeSB("3ab8", 1)
	DspShow ("GenB", "On")
end

function DukeT_Generator_L_off ()
	ipc.writeSB("3b78", 0)
	DspShow ("GenL", "Off")
end

function DukeT_Generator_R_off ()
	ipc.writeSB("3ab8", 0)
	DspShow ("GenR", "Off")
end

function DukeT_Generator_B_off ()
	ipc.writeSB("3b78", 0)
	ipc.writeSB("3ab8", 0)
	DspShow ("GenB", "Off")
end

-- starter
function DukeT_Starter_L_on ()
	ipc.writeSB("0892", 1)
	DspShow ("SttL", "On")
end

function DukeT_Starter_L_off ()
	ipc.writeSB("0892", 0)
	DspShow ("SttL", "Off")
end

function DukeT_Starter_R_on ()
	ipc.writeSB("092a", 1)
	DspShow ("SttR", "On")
end

function DukeT_Starter_R_off ()
	ipc.writeSB("092a", 0)
	DspShow ("SttR", "Off")
end



-- ## Lights #####################################

function Duke_Beacon_Lights ()
	ipc.control(66239)
	end

function Duke_Beacon_Recognition_Lights ()
	ipc.control(66239)
	ipc.control(66377)
	end

function Duke_Nav_Lights ()
	ipc.control(66379)
	end

function Duke_Nav_Strobe_Lights ()
	ipc.control(66379)
	ipc.control(65560)
	end

function Duke_L_R_Landing_Lights_On ()
	ipc.control(66059, 1)
	ipc.sleep(500)
	ipc.control(66376, 1)
	end

function Duke_L_R_Landing_Lights_Off ()
	ipc.control(66060, 0)
	ipc.sleep(500)
	ipc.control(66376, 0)
	end

-- Landing lights left toggle

function DukeT_LandingLightsL_toggle ()

	ipc.control(65751)
end



-- Landing lights right toggle

function DukeT_LandingLightsR_toggle ()

	ipc.control(66376)
end

-- cockpit lights toggle

function DukeT_CockpitLights_toggle ()

	ipc.control(66579)
end

-- ## Fuel #####################################

function Duke_L_Pump_1_On ()
	ipc.writeLvar("fuelPumpL", 0)	-- Select L Fuel Pump 1
	ipc.control(66340)				-- Toggle L Fuel Pump 1
	end

function Duke_L_Pump_1_Off ()
	ipc.control(66340)				-- Toggle L Fuel Pump 1
	end

function Duke_L_Pump_2_On ()
	ipc.writeLvar("fuelPumpL", 2)	-- Select L Fuel Pump 2
	ipc.control(66340)				-- Toggle L Fuel Pump 2
	end

function Duke_L_Pump_2_Off ()
	ipc.control(66340)				-- Toggle L Fuel Pump 2
	end

function Duke_R_Pump_1_On ()
   	ipc.writeLvar("fuelPumpR", 0)	-- Select R Fuel Pump 1
	ipc.control(66341)				-- Toggle R Fuel Pump 1
	end

function Duke_R_Pump_1_Off ()
	ipc.control(66341)				-- Toggle R Fuel Pump 1
	end

function Duke_R_Pump_2_On ()
   	ipc.writeLvar("fuelPumpR", 2)	-- Select R Fuel Pump 2
	ipc.control(66341)   			-- Toggle R Fuel Pump 2
	end

function Duke_R_Pump_2_Off ()
	ipc.control(66341)				-- Toggle R Fuel Pump 2
	end

function Duke_Tank_Selector_L_On ()
	ipc.writeLvar("L:Duke_Tank_Selector_L", 50)
	ipc.writeLvar("FUEL_SELECTOR_ALL")
	end

function Duke_Tank_Selector_L_Crossfeed ()
	ipc.writeLvar("L:Duke_Tank_Selector_L", 100)
	end

function Duke_Tank_Selector_L_Off ()
	ipc.sleep(250)
	ipc.writeLvar("L:Duke_Tank_Selector_L", 0)
	end

function Duke_Tank_Selector_R_On ()
	ipc.writeLvar("L:Duke_Tank_Selector_R", 50)
	ipc.writeLvar("FUEL_SELECTOR_ALL")
	end

function Duke_Tank_Selector_R_Crossfeed ()
	ipc.writeLvar("L:Duke_Tank_Selector_R", 100)
	end

function Duke_Tank_Selector_R_Off ()
	ipc.sleep(250)
	ipc.writeLvar("L:Duke_Tank_Selector_R", 0)
	end

-- Fuel pump + valve ENG1 on (both engines)

function DukeT_FuelPumpENG1_on ()

	ipc.writeSB("3b98", 1)

end

function DukeT_FuelPumpENG1_off ()

	ipc.writeSB("3b98", 0)
end


function DukeT_FuelPumpENG2_on ()

	ipc.writeSB("3ad8", 1)
end

function DukeT_FuelPumpENG2_off ()

	ipc.writeSB("3ad8", 0)
end


function DukeT_FuelValveENG1_on ()

	ipc.writeLvar("L:Duke_Tank_Selector_L", 50)
end


function DukeT_FuelValveENG1_off ()

	ipc.writeLvar("L:Duke_Tank_Selector_L", 0)
end


function DukeT_FuelValveENG2_on ()

	ipc.writeLvar("L:Duke_Tank_Selector_R", 50)
end

function DukeT_FuelValveENG2_off ()

	ipc.writeLvar("L:Duke_Tank_Selector_R", 0)
end



function DukeT_FuelPumps_on ()

	ipc.writeSB("3b98", 1)
	ipc.writeSB("3ad8", 1)

end

function DukeT_FuelPumps_off ()

	ipc.writeSB("3b98", 0)
	ipc.writeSB("3ad8", 0)

end

function DukeT_FuelValves_on ()

	ipc.writeLvar("L:Duke_Tank_Selector_L", 50)
	ipc.writeLvar("L:Duke_Tank_Selector_R", 50)
end

function DukeT_FuelValves_off ()

	ipc.writeLvar("L:Duke_Tank_Selector_L", 0)
	ipc.writeLvar("L:Duke_Tank_Selector_R", 0)
end


-- ## Cowl Flaps #####################################

function L_Cowl_Flap_Half ()
	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_1", 1)
	end

function L_Cowl_Flap_Open ()
	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_1", 2)
	end

function L_Cowl_Flap_Close ()
	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_1", 0)
	end

function R_Cowl_Flap_Half ()
	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_2", 1)
	end

function R_Cowl_Flap_Open ()
	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_2", 2)
	end

function R_Cowl_Flap_Close ()
	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_2", 0)
	end

-- oil cowl flaps closed

function DukeT_Cowl_close ()

	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_1", 0)
	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_2", 0)
	DspShow ("Cowl", "clos")
end

-- oil cowl flaps half

function DukeT_Cowl_half ()

	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_1", 1)
	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_2", 1)
    	DspShow ("Cowl", "half")
end

-- oil cowl flaps open

function DukeT_Cowl_open ()

	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_1", 2)
	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_2", 2)
    	DspShow ("Cowl", "open")
end

function CawlFlaps_LEFT_open ()

	local buf = ipc.readLvar("L:Duke_Cowl_Flaps_Switch_1") + 1

	if buf &gt; 2 then buf = 2 end

	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_1", buf)
    	DspShow ("CowL", "open")
end

function CawlFlaps_LEFT_close ()

	local buf = ipc.readLvar("L:Duke_Cowl_Flaps_Switch_1") - 1

	if buf &lt; 0 then buf = 0 end

	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_1", buf)
    	DspShow ("CowL", "clos")
end

function CawlFlaps_RIGHT_open ()

	local buf = ipc.readLvar("L:Duke_Cowl_Flaps_Switch_2") + 1

	if buf &gt; 2 then buf = 2 end

	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_2", buf)
    	DspShow ("CowR", "open")
end

function CawlFlaps_RIGHT_close ()

	local buf = ipc.readLvar("L:Duke_Cowl_Flaps_Switch_2") - 1

	if buf &lt; 0 then buf = 0 end

	ipc.writeLvar("L:Duke_Cowl_Flaps_Switch_2", buf)
    	DspShow ("CowR", "clos")
end

function CawlFlaps_BOTH_open ()

	CawlFlaps_LEFT_open ()
	CawlFlaps_RIGHT_open ()
    	DspShow ("Cwls", "open")
end

function CawlFlaps_BOTH_close ()

	CawlFlaps_LEFT_close ()
	CawlFlaps_RIGHT_close ()
    	DspShow ("Cwls", "clos")
end

-- ## De-Ice ###############

function Fuel_Vent_Heat_1_2_On ()
	ipc.writeLvar("L:fuelVentHeatL", 1)
	ipc.sleep(500)
	ipc.writeLvar("L:fuelVentHeatR", 1)
	end

function Fuel_Vent_Heat_1_2_Off ()
	ipc.writeLvar("L:fuelVentHeatR", 0)
	ipc.sleep(500)
	ipc.writeLvar("L:fuelVentHeatL", 0)
	end

function Duke_Surface_DeIce_One_Cycle ()
	ipc.writeLvar("Duke_Surface_Deice", 0)
	end

function Duke_Surface_DeIce_Manual ()
	ipc.writeLvar("L:Duke_Surface_Deice", 2)
	end

function Duke_Surface_DeIce_Off ()
	ipc.writeLvar("L:Duke_Surface_Deice", 1)
	end

function Structural_Deice_Toggle ()
	ipc.writeLvar("L:TOGGLE_STRUCTURAL_DEICE")
	end

function Duke_Pitot_Switches_L_R_On ()
	ipc.control(66072)
	ipc.sleep(500)
	ipc.writeLvar("L:Stall_Heat", 1)
	end

function Duke_Pitot_Switches_L_R_Off ()
	ipc.writeLvar("L:Stall_Heat", 0)
	ipc.sleep(500)
	ipc.control(66073)
	end

function Duke_Prop_Windshield_Heat_On ()
	ipc.control(66338)
	ipc.sleep(500)
	ipc.writeLvar("L:Duke_Wshield_Heat", 1)
	end

function Duke_Prop_Windshield_Heat_Off ()
	ipc.writeLvar("L:Duke_Wshield_Heat", 0)
	ipc.sleep(500)
	ipc.control(66338)
	end

function AntiIce_On ()
	ipc.control(66029)
	end

function AntiIce_Off ()
	ipc.control(66030)
	end

function AntiIce_Eng_1_2_Toggle ()
	ipc.control(66484)
	ipc.sleep(500)
	ipc.control(66485)
	end

-- ## Other ###############

--Parking Brakes

function Parking_Brakes_On ()
	ipc.writeSW("0BC8",32767)
	end

function Parking_Brakes_Off ()
	ipc.writeSW("0BC8",0)
	end

-- Pressure Dump

function Pressure_Dump_On ()
--	ipc.writeLVar("L:pressureDumpSwitch", 1)
	ipc.control(66841, 1) -- Pressurization Dump Switch On
	ipc.writeUB("0328", 1)
	end

function Pressure_Dump_Off ()
--	ipc.writeLVar("L:pressureDumpSwitch", 0)
	ipc.control(66841, 0) -- Pressurization Dump Switch Off
	ipc.writeUB("0328", 0)
	end

-- Pressure Shutoff Levers 1 &amp; 2

function Pressure_Shutoff_Lever1_On ()
--	ipc.writeLvar("L:pressAirShutoffLever1", 1)
	end

function Pressure_Shutoff_Lever1_Off ()
--	ipc.writeLVar("L:pressAirShutoffLever1", 0)
	end

function Pressure_Shutoff_Lever2_On ()
--	ipc.writeLVar("L:pressAirShutoffLever2", 1)
	end

function Pressure_Shutoff_Lever2_Off ()
--	ipc.writeLVar("L:pressAirShutoffLever2", 0)
	end

-- Gyro Pilot-Copilot

function Gyro_Pilot_Copilot_On ()
--	ipc.writeLVar("L:Gyro_Pilot_Copilot", 1)
	end

function Gyro_Pilot_Copilot_Off ()
--	ipc.writeLVar("L:Gyro_Pilot_Copilot", 0)
	end

-- XPDR inc

function DukeT_XPDR_inc ()

	i = ipc.readLvar("L:XPDR_State")

	if i &lt; 5 then
	ipc.writeLvar("L:XPDR_State", i+1)

	end

	if i == 5 then
	ipc.writeLvar("L:XPDR_State", 5)

	end
end

-- XPDR dec

function DukeT_XPDR_dec ()

	i = ipc.readLvar("L:XPDR_State")

	if i &gt; 0 then
	ipc.writeLvar("L:XPDR_State", i-1)

	end

	if i == 0 then
	ipc.writeLvar("L:XPDR_State", 0)

	end
end

function Master_Warning_Reset () 

	LVarSet = "L:MW_Reset" 

	ipc.writeLvar(LVarSet, 1) 
	DspShow("MSTR", "CLR") 

end 

function Yoke_Hide ()

	LVarSet = "L:DukeYokeVis" 

	ipc.writeLvar(LVarSet, 1) 
	DspShow("YOKE", "OFF") 

end 

function Yoke_Show ()

	LVarSet = "L:DukeYokeVis" 

	ipc.writeLvar(LVarSet, 0) 
	DspShow("YOKE", "ON") 

end

function RXP_530_show ()

	-- shift + 2
	ipc.keypress(50,9)

end

function Reliability ()

	ipc.writeUW("0372",50)
	end

function Center_Ailerons_Rudder ()
	ipc.control(65612)
	end

function Refresh_Scenery ()
	ipc.control(65562)
	end


-- ## system ###############

function InitVars ()

	Yoke_Hide ()

end

rustam · October 19, 2015

Thank you VERY much, Sir!!!

I took the liberty to translate your LINDA script to "basic" Lua language since I don't use Linda with FSX. And it works pretty well!

I hope you don't mind... :)

Cheers,

Rustam

Sign In

RealAir Beech Duke Turbine

Recommended Posts

Delta14Sierra

Link to comment

Share on other sites

rustam

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity

Important Information