gfd Posted November 9, 2015 Report Share Posted November 9, 2015 I am using the latest version of FSUIPC along with LINDA in P3D v3 inside of Windows 10 64 bit. I have started getting an error in the FSUIPC log as follows: *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory There are several instances of this error in the log. This file does not exist on my computer. Please see the log below. I should point out that I looked at this thread: http://forum.simflight.com/topic/80259-i-need-help-for-lua/ Have I inadvertently put FSUIPC into debug mode? Is this something I need to be concerned about? If not, please disregard with thanks. ********* FSUIPC4, Version 4.948 by Pete Dowson ********* Reading options from "S:\P3D\Modules\FSUIPC4.ini" Running inside Prepar3D v3 on Windows 8.0 Module base=57550000 User Name="Graham Derreck" User Addr="gderreck@shaw.ca" FSUIPC4 Key is provided WideFS7 Key is provided 4656 System time = 08/11/2015 21:15:08 4656 FLT UNC path = "\\GFD-DESKTOP\Documents\Prepar3D v3 Files\" 4656 Trying S:\P3D\Modules\SimConnectP3D2.dll 4656 Found it: trying to connect 4672 FS UNC path = "\\GFD-DESKTOP\P3D\" 4765 Finished: 0 Profile files created 4812 ---------------------- Joystick Device Scan ----------------------- 4812 Product= Saitek Pro Flight Quadrant 4812 Manufacturer= Saitek 4812 Vendor=06A3, Product=0C2D (Version 2.1) 4812 Serial Number= Saitek 4812 Product= SideWinder Force Feedback 2 Joystick 4812 Manufacturer= Microsoft 4812 Vendor=045E, Product=001B (Version 10.0) 4812 Serial Number= Microsoft 4812 Product= Saitek Pro Flight Combat Rudder Pedals 4812 Manufacturer= Saitek 4812 Vendor=06A3, Product=0764 (Version 2.1) 4812 Serial Number= Saitek 4828 Product= Pro Flight Cessna Trim Wheel 4828 Manufacturer= Saitek 4828 Vendor=06A3, Product=0BD4 (Version 1.7) 4828 Serial Number= RD014075 4828 Product= Saitek Pro Flight Quadrant 4828 Manufacturer= Saitek 4828 Vendor=06A3, Product=0C2D (Version 2.1) 4828 Serial Number= Saitek 4828 Product= Saitek Pro Flight Quadrant 4828 Manufacturer= Saitek 4828 Vendor=06A3, Product=0C2D (Version 2.1) 4828 Serial Number= Saitek 4828 ------------------------------------------------------------------- 4859 Run: "S:\P3D\Modules\linda.exe" 4937 LogOptions=00000000 00000001 4953 ------------------------------------------------------------------- 4953 ------ Setting the hooks and direct calls into the simulator ------ 4953 --- CONTROLS timer memory location obtained ok 4953 --- SIM1 Frictions access gained 4953 --- FS Controls Table located ok 4953 --- Installed Mouse Macro hooks ok. 4953 --- Wind smoothing fix is installed 4953 --- All links okay (except older global weather setting method) 4953 ------------------------------------------------------------------- 4953 SimConnect_Open succeeded: waiting to check version okay 4953 Trying to use SimConnect Prepar3D 4968 VRI port 1 "com3" opened 13062 VRI MCP2B ("MCP2 Boeing") detected on port com3 29078 Running in "Lockheed Martin� Prepar3D� v3", Version: 3.0.3.0 (SimConnect: 3.0.0.0) 29078 Initialising SimConnect data requests now 29078 FSUIPC Menu entry added 29093 \\GFD-DESKTOP\Documents\Prepar3D v3 Files\A2A_172_KFHR.fxml 29093 \\GFD-DESKTOP\P3D\SimObjects\Airplanes\A2A_C172\C172.air 44218 Weather Mode now = Theme 47468 \\GFD-DESKTOP\P3D\SimObjects\Airplanes\Aerosoft Airbus A319 CFM\A319.air 47468 \\GFD-DESKTOP\Documents\Prepar3D v3 Files\AC_A319_CYVR.fxml 100328 System time = 08/11/2015 21:16:44, Simulator time = 20:15:38 (04:15Z) 100343 Aircraft="Airbus A319 Air Canada C-GITP" 101328 Starting everything now ... 101343 LUA.0: beginning "S:\P3D\Modules\ipcReady.lua" 101343 LUA.0: ended "S:\P3D\Modules\ipcReady.lua" 101359 LUA.1: 101359 LUA.1: ************************** START ************************* 101359 LUA.1: [sTART]LINDA:: Loading... 101359 ASN active function link set 101359 Ready for ASN WX radar 101375 LUA.1: LINDA:: [sTART] VRInsight MCP Set = mcp2 101500 LUA.1: LINDA:: [sTART] New Aircraft Selected - restarting... 101500 LUA.1: LINDA:: [sTART] Aircraft: Airbus A319 Air Canada C-GITP 101500 LUA.1: LINDA:: [sTART] Air file: \\GFD-DESKTOP\P3D\SimObjects\Airplanes\Aerosoft Airbus A319 CFM\A319.air 101562 LUA.1: LINDA:: [sTART] Aircraft module detected: Aerosoft Airbus 101593 LUA.0: LINDA:: [iNIT] Starting Initialisation... 101609 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-aivlasoft 101609 LUA.0: LINDA:: [LIB] AivlaSoft library loaded... 101609 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-ATC 101609 LUA.0: LINDA:: [LIB] ATC library loaded... 101609 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-fallback 101625 LUA.0: LINDA:: [LIB] FSX standard library loaded... 101625 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-FS2Crew 101625 LUA.0: LINDA:: [LIB] FS2Crew library loaded... 101625 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-fsx 101640 LUA.0: LINDA:: [LIB] FSX Functions loaded... 101640 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-IVAO 101640 LUA.0: LINDA:: [LIB] IVAO library loaded... 101640 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-realityxp 101640 LUA.0: LINDA:: [LIB] RealityXP library loaded... 101656 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-saitek 101656 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-user 101656 LUA.0: LINDA:: [LIB] User Library loaded... 101656 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-VATSIM 101656 LUA.0: LINDA:: [LIB] VATSIM library loaded... 101672 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-vrinsight 101672 LUA.0: LINDA:: [LIB] VRInsight Function Library loaded... 101672 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-weather 101672 LUA.0: LINDA:: [LIB] Weather library loaded... 101672 LUA.0: LINDA:: [iNIT] loading optional library: linda/libs/lib-a2amap 101687 LUA.0: LINDA:: [LIB] A2A MAP library loaded... 101687 LUA.0: LINDA:: [iNIT] Initializing Common Variables... 101734 LUA.0: LINDA:: [iNIT] User GLOBAL config loaded... 101734 LUA.0: LINDA:: User's modifications script is loaded... 101734 LUA.0: LINDA:: [iNIT] User FUNCTIONS loaded... 101750 LUA.0: LINDA:: [iNIT] VRI MCP config loaded... 101765 LUA.0: LINDA:: [iNIT] Finalising Initialisation... 101765 LUA.0: LINDA:: [COMM] DSP Mode 1 101797 LUA.0: LINDA:: [COMM] Checking VRI 101797 LUA.0: LINDA:: [COMM] Enabling VRI 101812 LUA.0: LINDA:: [COMM] ConnectMCP - Connecting to MCP Panel... 101812 LUA.0: LINDA:: [COMM] ConnectMCP completed - 320530620 101812 LUA.0: LINDA:: [COMM] InitMCP - Initialising MCP... 102281 LUA.0: LINDA:: [COMM] Initializing MCP2 (Boeing)... 102500 Advanced Weather Interface Enabled 110687 LUA.0: LINDA:: [COMM] RADIOS : Empty command for :: COM1 Select 110750 LUA.0: LINDA:: [COMM] InitMCP - completed 111890 LUA.0: LINDA:: [COMM] MCP Started... 111890 LUA.0: LINDA:: [iNIT] Initialising HID devices... 111906 LUA.0: LINDA:: [iNIT] Loading a fallback joysticks config... 111922 LUA.0: LINDA:: [iNIT] Loading Aerosoft Airbus joysticks config... 111922 LUA.0: LINDA:: [iNIT] Module: Aerosoft Airbus Started... 111937 LUA.0: LINDA:: [iNIT] Initiating Autosave true 114578 LUA.0: LINDA:: [iNIT] Ready to go, Captain! 114593 LUA.0: LINDA:: Offsets watching list cleared! 114765 LUA.0: LINDA:: LVars watching list cleared... 114953 LUA.0: LINDA:: Offsets watching list cleared! 115109 LUA.0: LINDA:: LVars watching list cleared... 116125 LUA.0: LINDA:: Offsets watching list cleared! 116187 LUA.0: LINDA:: LVars watching list cleared... 116343 LUA.0: LINDA:: Offsets watching list cleared! 116468 LUA.0: LINDA:: LVars watching list cleared... 116593 LUA.0: LINDA:: Offsets watching list cleared! 150297 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 150297 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 150297 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 150297 LUA.2: Global: ipcPARAM = -2991 150328 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 150328 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 150328 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 150328 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 150328 LUA.2: Global: ipcPARAM = -4421 150359 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 150359 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 150359 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 150359 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 150359 LUA.2: Global: ipcPARAM = -6111 150390 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 150390 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 150390 LUA.3: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 150390 LUA.3: S:\P3D\Modules\AirbusX_Thr2.lua:1 150390 LUA.3: Global: ipcPARAM = -7932 150422 LUA.3: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 150422 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 150422 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 150422 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 150422 LUA.2: Global: ipcPARAM = -8842 150437 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 150437 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 150437 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 150437 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 150453 LUA.2: Global: ipcPARAM = -11052 150468 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 150468 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 150468 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 150468 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 150468 LUA.2: Global: ipcPARAM = -12353 150500 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 150547 LUA.3: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 150547 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 150547 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 150547 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 150547 LUA.2: Global: ipcPARAM = -15473 150562 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155015 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155015 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155015 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155015 LUA.2: Global: ipcPARAM = -15213 155047 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155047 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155047 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155047 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155047 LUA.2: Global: ipcPARAM = -11312 155062 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155078 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155078 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155078 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155078 LUA.2: Global: ipcPARAM = -7282 155093 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155093 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155093 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155093 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155109 LUA.2: Global: ipcPARAM = -3641 155125 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155156 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155156 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155187 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155187 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155187 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155187 LUA.2: Global: ipcPARAM = 1408 155218 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155218 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155218 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155218 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155218 LUA.2: Global: ipcPARAM = 3712 155250 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155281 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155312 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155328 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155328 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155328 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155328 LUA.2: Global: ipcPARAM = 11520 155359 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155359 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155359 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155359 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155359 LUA.2: Global: ipcPARAM = 14208 155390 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155390 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155390 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155390 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155390 LUA.2: Global: ipcPARAM = 15616 155422 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155890 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155890 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155890 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155906 LUA.2: Global: ipcPARAM = 15488 155937 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155937 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155937 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155937 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155937 LUA.2: Global: ipcPARAM = 14080 155953 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155953 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155953 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155953 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155968 LUA.2: Global: ipcPARAM = 12800 155984 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 155984 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 155984 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 155984 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 155984 LUA.2: Global: ipcPARAM = 10624 156015 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156047 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156047 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156047 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156047 LUA.2: Global: ipcPARAM = 8064 156078 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156078 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156078 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156078 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156078 LUA.2: Global: ipcPARAM = 4992 156109 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156109 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156109 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156109 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156109 LUA.2: Global: ipcPARAM = 3712 156140 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156140 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156140 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156140 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156140 LUA.2: Global: ipcPARAM = 1280 156172 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156172 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156172 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156172 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156172 LUA.2: Global: ipcPARAM = -1040 156203 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156203 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156203 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156203 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156203 LUA.2: Global: ipcPARAM = -3511 156234 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156234 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156234 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156234 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156234 LUA.2: Global: ipcPARAM = -6111 156265 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156265 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156265 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156265 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156265 LUA.2: Global: ipcPARAM = -7282 156297 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156328 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156328 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156328 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156328 LUA.2: Global: ipcPARAM = -10532 156359 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156359 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156359 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156359 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156359 LUA.2: Global: ipcPARAM = -11833 156390 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156390 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156390 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156390 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156390 LUA.2: Global: ipcPARAM = -13003 156406 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156406 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156406 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156406 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156406 LUA.2: Global: ipcPARAM = -14173 156437 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156468 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156468 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156468 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156468 LUA.2: Global: ipcPARAM = -15083 156500 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 156500 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 156500 LUA.2: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 156500 LUA.2: S:\P3D\Modules\AirbusX_Thr2.lua:1 156500 LUA.2: Global: ipcPARAM = -16384 156531 LUA.2: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 240609 Sim stopped: average frame rate for last 141 secs = 32.3 fps 252656 *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory 252656 LUA.3: beginning "S:\P3D\Modules\AirbusX_Thr2.lua" 252656 LUA.3: S:\P3D\Modules\AirbusX_Thr2.lua:1 252656 LUA.3: Global: ipcPARAM = -16384 252656 LUA.3: ended "S:\P3D\Modules\AirbusX_Thr2.lua" 321437 Sim stopped: average frame rate for last 23 secs = 34.1 fps 556015 Sim stopped: average frame rate for last 120 secs = 30.5 fps 612937 Sim stopped: average frame rate for last 56 secs = 33.2 fps 867343 Sim stopped: average frame rate for last 249 secs = 34.1 fps 1146968 Sim stopped: average frame rate for last 64 secs = 27.1 fps 1206109 Sim stopped: average frame rate for last 20 secs = 25.5 fps Link to comment Share on other sites More sharing options...
Pete Dowson Posted November 9, 2015 Report Share Posted November 9, 2015 I am using the latest version of FSUIPC along with LINDA in P3D v3 inside of Windows 10 64 bit. I have started getting an error in the FSUIPC log as follows: *** LUA Error: cannot open S:\P3D\Modules\ipcDebug.lua: No such file or directory There are several instances of this error in the log. This file does not exist on my computer. ipcDebug.lua is an now obsolete way of tracing Lua plug-ins which is superseded by the built-in Lua trace/debug option. The ipcDebug.lua, (which is still supplied in your Lua plugins ZIP in the FSUIPC Documents folder in case you really want to use it), is only used when a Lua plugin is invoked by a "LuaDebug" command. Therefore whatever mechanism you are using to start those Lua plug-ins is using LuaDebug. You should check your LINDA settings I think. If you want to log Lua use the option in the FSUIPC logging tab. Pete Link to comment Share on other sites More sharing options...
gfd Posted November 9, 2015 Author Report Share Posted November 9, 2015 Thanks for the background. I'll post to them over at their place and see what they have to say. I couldn't figure out how I might have invoked some elevated debug activity in FSUIPC. I use ASN and therefore do not make extensive use of your miscellaneous options. The exceptions being VAS tracking via the log page and the facility to start the session with accurate time. Controller assignments and WideFS buttons are something else altogether. I mention this as you expressed concern about P3D v3 playing nice with FSUIPC. I don't know what significance this will have, but: -as stated elsewhere, P3D v3 appears to respect the stripping of controller assignments from its options. I have had controllers drop out the reinstalled them, without automatic assignment. The controllers checkbox is filled. The only controls I use in P3D are those for the avatar. -was able to make use of FSUIPC calibration. In one case, I was able to assign 75% of the travel of an axis to spoilers using FSUIPC calibration, and the final 25% to arming/disarming ground spoilers direct through P3D; using the strpped facility on the right side of the tab. -other axes that do not calibrate through FSUIPC, appear to work correctly including those assigned to the Airbus thrust lua file you put out awhile ago. Probably should be a separate post. However, I hate to pass up on an opportunity to be verbose. Link to comment Share on other sites More sharing options...
Pete Dowson Posted November 9, 2015 Report Share Posted November 9, 2015 -was able to make use of FSUIPC calibration. In one case, I was able to assign 75% of the travel of an axis to spoilers using FSUIPC calibration, and the final 25% to arming/disarming ground spoilers direct through P3D; using the strpped facility on the right side of the tab. -other axes that do not calibrate through FSUIPC, appear to work correctly including those assigned to the Airbus thrust lua file you put out awhile ago. Probably should be a separate post. However, I hate to pass up on an opportunity to be verbose. Axes assigned in FSUIPC can be calibrated in FSUIPC. The problem is only when they are assigned in P3D because P3D isn't scanning them in modal dialogue modes. They've fixed it internally already I think. Axes calibrated before P3Dv3, or calibrated in FSUIPC using the normal controls assignments in FSUIPC, will remain calibrated if assignment is changed back to P3D. It's only the act of setting the calibration values which is affected, not the calibrated results themselves. Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now