[Unable to get "IgnoreThese" working]

29 minutes ago, John Dowson said:

The P in the assignments line indicates Press - all button assignments are preceded by one of P, H, R or U for the button action (Press, Hold, Repeat, Unpress or release). See the Advanced User guide for the format of button definitions.

Yes, try that - and if that doesn't work, use the number that M is mapped to.

John

Useful info that too, that I should have noticed in the advanced users manual. Thanks.

[Unable to get "IgnoreThese" working]

Thanks John,

I thought that I had already tried it but IgnoreThese=M.7 works fine.

cheers

Keith

[Unable to get "IgnoreThese" working]

Hi John,

When I assign my buttons they are listed in the ini as PG,5   PM,6 etc even though they appear

as G,5 and M6 in the assignments box when I press the button. I will try IgnoreThese=M.7

and get back to you.

Keith

[Unable to get "IgnoreThese" working]

Hi John

Can you assist please. I have a dodgy joystick button which is stopping me assign other buttons because it keeps

populating the assignments box when trying to assign.

In my ini file I have three [Buttons} sections. One is for all aircraft and two are for specific aircraft.

At the top of each section I have put the line "IgnoreThese=PM.7" ,  but this hasn't worked. When I open up

my ini file to check that the lines are still there, the one under the all aircraft list is missing, Is FSUIPC7 deleting this on

startup and is this the problem or is there something in my syntax that is wrong?

I also tried PM,7 as the buttons in the rest of the list are written this way but that didn't work either.

 

many thanks

Keith

[No Hvars listed]

Ah,

Apologies,I assumed that the Hvars.lst file was an FSUIPC7 file because it sits in the main FSUIPC7 folder but I guess it must be something to do with the LINDA interface that I use. 

I'll go back into my hole!

🥵

 

 

[No Hvars listed]

Hi,

I don't know if it is just the aircraft I am working on but I don't see any Hvars listed.

I am working with the Asobo Longitude. In particular I am trying to locate the event/lvar/Hvars which operates the Bus Tie switch.

I looked in the Hvars.lst file in the main FSUIPC7 folder but it is empty. The Lvars.lst is populated ok.

Thanks

Keith

 

[The latest version of FSUIPC7 and the WASM module]

That's great. Thanks John.

Regards

Keith

[The latest version of FSUIPC7 and the WASM module]

Hi,

I have been using fsuipc7 in conjunction with the Mobiflight WASM module since as soon as they became available for MSFS.

I wish to update FSUIPC to the latest version and have read that there is now a WASM module authored by John Dowson.

If I update to the latest version of FSUIPC does the WASM module now come with it or do I 

have to download it separately?

Once installed, should I delete the Mobiflight wasm module?

Many thanks

Keith Hackett 

[Using FSUIPC7 with Mobiflight WASM module]

18 hours ago, guit33 said:

Sorry

But it does not work (nothing happen) with the g1000 event.

I have a events.txt in C:\Users\Guillaume\AppData\Roaming\Microsoft Flight Simulator\Packages\Community\mobiflight-event-module\modules

I have a GNS3000.evt in c\fsuipc (last version)

I have programme fsuipc

Does it work for you in the TBM930 ?

GNS3000.evt 2.05 kB · 0 downloads events.txt 10.46 kB · 0 downloads

Inside your community folder you should have the following....

A folder called "mobiflight-event-module

Inside this folder you should see a folder called "modules", plus a file called layout.json and a file called manifest.json.

Inside the modules" folder you should have a file called "StandaloneModule.wasm"

Hope this helps

Keith

[Using FSUIPC7 with Mobiflight WASM module]

Try it in the Longitude to make sure it is working with that aircraft for you.

I cannot test the TBM at present because my cockpit is currently dismantled while I am doing some scenery design work.

[Using FSUIPC7 with Mobiflight WASM module]

13 hours ago, guit33 said:

Sorry

But it does not work (nothing happen) with the g1000 event.

I have a events.txt in C:\Users\Guillaume\AppData\Roaming\Microsoft Flight Simulator\Packages\Community\mobiflight-event-module\modules

I have a GNS3000.evt in c\fsuipc (last version)

I have programme fsuipc

Does it work for you in the TBM930 ?

GNS3000.evt 2.05 kB · 0 downloads events.txt 10.46 kB · 0 downloads

 

[Using FSUIPC7 with Mobiflight WASM module]

4 hours ago, guit33 said:

Hello

Unfortunately This one does not exist for the G3000

I try all these and they don't work (I use Mobiflight wasm and the event file for fsuipc)

171=MobiFlight.AS3000_TSC_Horizontal_TopKnob_Large_INC
172=MobiFlight.AS3000_TSC_Horizontal_TopKnob_Large_DEC
173=MobiFlight.AS3000_TSC_Horizontal_TopKnob_Small_INC
174=MobiFlight.AS3000_TSC_Horizontal_TopKnob_Small_DEC
175=MobiFlight.AS3000_TSC_Horizontal_TopKnob_Push_Long
176=MobiFlight.AS3000_TSC_Horizontal_TopKnob_Push
177=MobiFlight.AS3000_TSC_Horizontal_BottomKnob_Small_INC
178=MobiFlight.AS3000_TSC_Horizontal_BottomKnob_Small_DEC
179=MobiFlight.AS3000_TSC_Horizontal_BottomKnob_Push
180=MobiFlight.AS3000_TSC_Vertical_BottomKnob_Small_INC
181=MobiFlight.AS3000_TSC_Vertical_BottomKnob_Small_DEC
182=MobiFlight.AS3000_TSC_Vertical_BottomKnob_Push_Long
183=MobiFlight.AS3000_TSC_Vertical_BottomKnob_Push
184=MobiFlight.AS3000_TSC_Vertical_BottomKnob_Large_INC
185=MobiFlight.AS3000_TSC_Vertical_BottomKnob_Large_DEC
186=MobiFlight.AS3000_TSC_Vertical_TopKnob_Large_INC
187=MobiFlight.AS3000_TSC_Vertical_TopKnob_Large_DEC
188=MobiFlight.AS3000_TSC_Vertical_TopKnob_Small_INC
189=MobiFlight.AS3000_TSC_Vertical_TopKnob_Small_DEC

For the map zoom you dont need to use one specifically for the g3000 as it uses the g1000 event. This is why it works with the longitude.

[Using FSUIPC7 with Mobiflight WASM module]

25 minutes ago, guit33 said:

Hello

I am looking for the event to move the knob of the GTC580 for the G3000 (for the TBM930): to zoom the map .

I try all the event possible (with knob inside) and they don't work

Is all the event are working ? 

 

187=MobiFlight.AS3000_TSC_Vertical_TopKnob_Large_DEC

Hi, i don't use the TBM but for the correct event for  Longitude and G1000 is....

AS1000_MFD_RANGE_INC 

and

AS1000_MFD_RANGE_DEC

Try this one.

[Using FSUIPC7 with Mobiflight WASM module]

12 minutes ago, John Dowson said:

Event file names are independent of the WASM - its only the names of the events in the file that depend on the WASM.
His problem was that MSFs wasn't running, and event files are only loaded once FSUIPC is connected yo MSFS.

Yep , I doubted myself as soon as I wrote it !

[Using FSUIPC7 with Mobiflight WASM module]

1 minute ago, Psistorm said:

Ah, looks like there's my facepalm moment. I definitely missed that requirement, I will conduct a test right away!

And yes, that did fix it. Apologies for missing out on that, I'm sure it's been mentioned somewhere, and thank you for your help, I'm now able to configure everything accordingly!

Well done. 👍

[Using FSUIPC7 with Mobiflight WASM module]

I doubt that it would recognise evt files that have had their names changed unless the WASM is changed too. I would stick to the original file name.

[Using FSUIPC7 with Mobiflight WASM module]

At the bottom of my ini file I have the following.....

[EventFiles]

0=Mobiflight-Events2

1=Mobiflight-Events1

You only need one of these two lines if you are only using one of the EVT files from Mobiflight. I assume also that you have installed the Mobiflight WASM folder in the community folder.

Hope this helps and sorry for butting in John! I thought that you may be busy

Regards

Keith

[CRS encoder via EventID's 65663 - 65662 param 0]

This bug can be quite useful. The bug only affects events assigned to an "always on" type switch and only if the event is assigned in MSFS. The bug is not triggered if you assign all of your controls in FSUIPC7 (thanks John). 

To make use of the bug I have 1 switch (a physical toggle switch) assigned directly in MSFS . When i want larger increments for alt select, heading bug select, autothrottle speed select etc i flick my switch then switch it off again after i have selected my altitude or whatever. 

Regards

Keith

[Using FSUIPC7 with Mobiflight WASM module]

I have just found the Mobiflight event which operates the MFD map range in the Longitude.

For anyone that needs it look for event numbers 180 and 181 in the mobiflight-Events1.evt file

 

Whoop whoop !

regards

Stinger

[Using FSUIPC7 with Mobiflight WASM module]

Mobiflight are thinking of sharing their source code so look out for that.

[Using FSUIPC7 with Mobiflight WASM module]

Hi John,

I see that we can delete events from the .evt file if we don't need them, can we cut and paste events from one .evt file to another? Does that work?

 

thanks

Keith

[Using FSUIPC7 with Mobiflight WASM module]

I have now tried this with FSUIPC7 and it works a treat. Just using evt file No1 at the moment. There are still more functions to add but I am sure they will come. I managed to assign the G1000 map range knob which works fine.

Personally speaking I need it too for the Longitude but patience is a virtue.

Thanks John for the info on installing it. 

Regards

Keith

[Using FSUIPC7 with Mobiflight WASM module]

Sure thing.

[Using FSUIPC7 with Mobiflight WASM module]

4 minutes ago, John Dowson said:

Yes.

You need to install and run it initially, to enable beta updates and to download the WASM module. Once that is done and you have placed the WASM folder in the community folder, you don't need to run Mobiflight anymore.

Just follow the instructions here.

John

Thanks John for clarifying.

I'll try this tomorrow.

Keith

[Using FSUIPC7 with Mobiflight WASM module]

I am a little confused as to what is needed. Is it just a matter of installing the WASM into the community folder and then copying the .evt file into the FSUIPC7 installation folder? Do we still need to install Mobiflight itself?

Sorry for being dumb !

Keith